bladeRF/fx3_firmware/make/toolchain.mk.sample
Jon Szymaniak 8c2b16ca28 FX3 Firmware: Refactored build
These changes fix a regression caused by changeset
dc187e0640, which breaks the build
under Windows.

The firmware can now be built from the command line in both Linux and
Windows. The Eclipse project files now use the same Makefile as the
command line build, rather than generated Makefiles. As such, the
generated Debug/ has been removed.

Release builds are the default. To perform a debug build, run make
with DEBUG=y.
2013-07-06 14:14:09 -07:00

133 lines
4.1 KiB
Text

# Copy this file to toolchain.mk and ensure the following are filled in
# correctly for your system:
#
# FX3_ROOT - Path to FX3 SDK
# ARMGCC_INSTALL_PATH - Path to ARM GCC toolchain within the FX3 SDK
# ARMGCC_VERSION - Version number of GCC toolchain included in SDK
# FX3_FW_DIR - "firmware" directory in FX3 SDK
#
# If you edit this file, be wary of potential path-related issues.
# (Specifically, be careful will paths with spaces. These will likely appear
# in Windows-based builds if default install paths are used.
################################################################################
# Hack to check if we're in windows, otherwise assume *nix
ifdef SystemRoot
HOST_IS_WINDOWS := y
endif
# Running into some issues with Windows paths, as back-escaped spaces in paths
# are needed for make, but this doesn't fly when executing external programs
# (e.g., gcc, ld)
#
# This is a little hack to replace a paths with escaped spaces
# with a quoted, space-containing path.
#
# If anyone has any suggestions or advice on cleaning this up,
# please feel free to make some noise over at:
# www.github.com/jynik/bladeRF
pathfixup = $(if $(HOST_IS_WINDOWS),"$(subst /,\,$(subst \ , ,$(1)))",$(1))
# These are the items that will likely vary system to system
ARMGCC_VERSION ?= 4.5.2
################################
# Paths
################################
ifdef HOST_IS_WINDOWS
FX3_ROOT ?= C:/Program\ Files\ (x86)/Cypress/EZ-USB\ FX3\ SDK/1.2
ARMGCC_INSTALL_PATH ?= $(FX3_ROOT)
FX3_FW_DIR := $(FX3_ROOT)/firmware
ELF2IMG_DIR := $(FX3_ROOT)/util/elf2img
else
FX3_ROOT ?= /opt/cypress/fx3_sdk
ARMGCC_INSTALL_PATH ?= $(FX3_ROOT)/arm-2011.03
FX3_FW_DIR := $(FX3_ROOT)/cyfx3sdk/firmware
ELF2IMG_DIR := $(FX3_ROOT)/cyfx3sdk/util/elf2img
endif
# Target firmare directory
FX3_U3PFW_DIR := $(FX3_FW_DIR)/u3p_firmware
# Header files for our target device
FX3_FWINC_DIR := $(FX3_U3PFW_DIR)/inc
# Library directory
ifdef DEBUG
FX3_LIB_DIR := $(FX3_U3PFW_DIR)/lib/fx3_debug
else
FX3_LIB_DIR := $(FX3_U3PFW_DIR)/lib/fx3_release
endif
# Path to some build depdencies - we'll need to compile/assemble a few items
# from this directory and link against them
TOOLCHAIN_DEPS_DIR := $(FX3_FW_DIR)/common
################################
# Libraries
################################
FX3_LIBGCC := $(ARMGCC_INSTALL_PATH)/lib/gcc/arm-none-eabi/$(ARMGCC_VERSION)/libgcc.a
FX3_LIBC := $(ARMGCC_INSTALL_PATH)/arm-none-eabi/lib/libc.a
# Careful if you're making changes here - remember that order matters.
FX3_LIBS := $(call pathfixup,$(FX3_LIB_DIR)/cyfxapi.a) \
$(call pathfixup,$(FX3_LIB_DIR)/cyu3lpp.a) \
$(call pathfixup,$(FX3_LIB_DIR)/cyu3threadx.a)\
$(call pathfixup,$(FX3_LIBC)) \
$(call pathfixup,$(FX3_LIBGCC))
################################
# Tools
################################
# Setup host and cross tools
CROSS_COMPILE ?= $(ARMGCC_INSTALL_PATH)/bin/arm-none-eabi-
HOST_CC := $(CC)
CC := $(call pathfixup,$(CROSS_COMPILE)gcc)
LD := $(call pathfixup,$(CROSS_COMPILE)ld)
FW_INC := -I$(call pathfixup,$(FX3_FWINC_DIR))
LINKER_FILE := $(call pathfixup,$(FX3_FW_DIR)/common/fx3.ld)
ifdef HOST_IS_WINDOWS
RM := cs-rm
else
RM := rm
endif
# Set up toolchain specific compiler and linker flags
TOOLCHAIN_CFLAGS := -DCYU3P_FX3=1 -D__CYU3P_TX__=1 \
-mcpu=arm926ej-s -mthumb-interwork \
$(FW_INC)
ifdef DEBUG
TOOLCHAIN_CFLAGS += -DTX_ENABLE_EVENT_TRACE
endif
TOOLCHAIN_LDFLAGS := --entry CyU3PFirmwareEntry \
$(FX3_LIBS) \
-T $(LINKER_FILE) -d --gc-sections \
--no-wchar-size-warning
################################
# Dependencies
################################
TOOLCHAIN_DEPS_SRC_C := $(TOOLCHAIN_DEPS_DIR)/cyfxtx.c
TOOLCHAIN_DEPS_SRC_A := $(TOOLCHAIN_DEPS_DIR)/cyfx_gcc_startup.S
TOOLCHAIN_DEPS_OBJ_C := $(notdir $(TOOLCHAIN_DEPS_SRC_C:.c=.o))
TOOLCHAIN_DEPS_OBJ_A := $(notdir $(TOOLCHAIN_DEPS_SRC_A:.S=.o))
TOOLCHAIN_DEPS_OBJ := $(TOOLCHAIN_DEPS_OBJ_C) $(TOOLCHAIN_DEPS_OBJ_A)
ifdef HOST_IS_WINDOWS
ELF2IMG_SRC :=
ELF2IMG := $(ELF2IMG_DIR)/elf2img.exe
else
ELF2IMG_SRC := $(call pathfixup,$(ELF2IMG_DIR)/elf2img.c)
ELF2IMG := ./elf2img
endif
build_toolchain_dep = $(CC) $(call pathfixup,$(1)) $(CFLAGS) -c -o $(2)