bladeRF USB 3.0 Superspeed Software Defined Radio Source Code
http://nuand.com
- C 45.8%
- VHDL 21%
- Verilog 15.8%
- Tcl 3.8%
- MATLAB 3.2%
- Other 10.3%
This leads to AGC being disabled on every call of bladeRF-cli. Please see https://github.com/Nuand/bladeRF/blob/master/host/utilities/bladeRF-cli/src/cmd/xb300.c#L117 for the proper usage. I'm not sure if only checking LSB is the proper way to do it, as val (uint32_t) is uninitialized and str2bool sees it as bool (on my machine "off" is 2048 and "on" is 2049), but it would even work if those "else if's" are being reordered, thus initialized by something else to a non-zero value, or you could zero it right before the str2bool call. The printf call might not be needed anymore. Notes: With the latest changes in kalibrate-bladeRF (add win32 support), changing the buffer sizes of m_x_cb, m_y_cb, m_e_cb, the results of the program look even more odd. Were those changes intended? Either the outputs are correct before and after the patch, or one BTS has the worst clock in history. I think it's the second one. With the latest FPGA change (0.7.0 -> 0.7.1, using edge_detector instead of pulse_gen), even setting the sample rate can sometimes lead to a failure. (At least on my board, only shortly after power-on) Have a nice weekend! Signed-off-by: Christian Inci <chris.gh@broke-the-inter.net> |
||
|---|---|---|
| debian | ||
| doc | ||
| firmware_common | ||
| fpga_common | ||
| fx3_firmware | ||
| hdl | ||
| host | ||
| legal | ||
| .clang-format | ||
| .gitignore | ||
| CHANGELOG | ||
| CMakeLists.txt | ||
| CONTRIBUTORS | ||
| COPYING | ||
| README.md | ||
bladeRF Source
This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:
| Directory | Description |
|---|---|
| firmware_common | Source and header files common between firmware and host software |
| fx3_firmware | Firmware for the Cypress FX3 USB controller |
| hdl | All HDL code associated with the Cyclone IV FPGA |
| host | Host-side libraries, drivers, utilities and samples |
Quick Start
- Clone this repository via:
git clone https://github.com/Nuand/bladeRF.git - Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
- Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
- Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
- Attach the bladeRF board to your fastest USB port.
- You should now be able to see your device in the list output via
bladeRF-cli -p - You can view additional information about the device via
bladeRF-cli -e info -e version. - If any warnings indicate that a firmware update is needed, run:
bladeRF-cli -f <firmware_file>.
- If you ever find the device booting into the FX3 bootloader (e.g., if you unplug the device in the middle of a firmware upgrade), see the
recoverycommand in bladeRF-cli for additional details.
- See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool
For more information, see the bladeRF wiki.
Build Variables
Below are global options to choose which parts of the bladeRF project should be built from the top level. Please see the fx3_firmware and host subdirectories for more specific options.
| Option | Description |
|---|---|
| -DENABLE_FX3_BUILD=<ON/OFF> | Enables building the FX3 firmware. Default: OFF |
| -DENABLE_HOST_BUILD=<ON/OFF> | Enables building the host library and utilities overall. Default: ON |