bladeRF USB 3.0 Superspeed Software Defined Radio Source Code
http://nuand.com
- C 45.8%
- VHDL 21%
- Verilog 15.8%
- Tcl 3.8%
- MATLAB 3.2%
- Other 10.3%
The CLI now supports flashing the FX3 and loading the FPGA from the command line and through the interactive console. To flash the firmware from the command line: ./bin/bladerf -b -f ./path/to/img -d /dev/bladerf1 To load the firmware from the command line: ./bin/bladerf -b -l ./path/to/rbf -d /dev/bladerf1 To flash/load interactively either run with -d /dev/bladerf1, or use the open command to attach to a device: bladeRF> open /dev/bladerf1 To flash the firmware interactively: bladeRF> load fx3 ./path/to/img To load the FPGA interactively: bladeRF> load fpga ./path/to/rbf Note that a power-on-reset is currently required in between flashing firmware and loading the FPGA. Various commands have been stubbed out for the time being. A TODO list has been created to keep track of desired functionality. The simple_load and upgrade_firmware programs have been removed, as they are no longer needed. |
||
|---|---|---|
| common | ||
| fx3_firmware | ||
| hdl | ||
| linux | ||
| COPYING | ||
| README | ||
This README details how to build the FSK bridge example To build and run the FSK bridge rea 1) Open existing hdl/quartus/bladerf.qsf project in Quartus a) Generate the Nios core i) Tools -> QSys -> File -> Open -> navigate to ./hdl/fpga/ip/altera/nios_system/nios_system.qsys ii) After opening qsys file, go to Generation tab, click the "Generate" button b) Compile the embedded Nios image i) Tools -> Nios II Software Build Tools for Eclipse I) File -> Import -> General -> Existing Projects into Workspace -> Next -> Browse to checkout root directory -> check both lms_spi_controller and lms_spi_controller_bsp -> Finish II) right click lms_spi_controller_bsp -> NIOS II -> Generate BSP III) right click lms_spi_controller -> Build IV) right click lms_spi_controller -> Make Targets -> Build... -> select mem_init_generate -> Build c) Synthesize FPGA image i) Processing -> Start Compilation 2) Compile driver and user mode applications a) cd linux/kernel ; make ; insmod bladeRF.ko b) cd ../apps; make c) To program the fpga execute ./simple_load c4images/blink.rbf i) Load bladerf.rbf from the quartus output_files directory 3) Use bladeRF as an FSK bridge!