bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak eecc0d2799 libbladeRF: Implemented firmware flashing, touched up FPGA loading.
Credit where credit is due -- All the code here is basically
copy/paste from Robert's earlier test code, with some added error
checks and debug output.

The firmware loading now checks the write return value and
performs partial writes as needed.

Items that need to be revisited are the sanity checks on file
sizes. In the future I plan to implement a "bladeRF Image" format
that will wrap size and a hash around a firmware/bitstream. These
checks will probably go into that code.
2013-06-16 18:17:49 -07:00
common libbladeRF: driver: add host software support for GPIO over UART bridge 2013-06-09 23:03:28 -07:00
fx3_firmware fx3_firmware: fix burst length for USB2.0 enumeration 2013-06-16 18:17:45 -07:00
hdl fpga: Changed build system. 2013-06-16 18:15:56 -07:00
linux libbladeRF: Implemented firmware flashing, touched up FPGA loading. 2013-06-16 18:17:49 -07:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README Update README 2013-06-15 21:53:00 -04:00

This README details how to build the FSK bridge example

To build and run the FSK bridge rea
1) Open existing hdl/quartus/bladerf.qsf project in Quartus
	a) Generate the Nios core
		i) Tools -> QSys -> File -> Open -> navigate to ./hdl/fpga/ip/altera/nios_system/nios_system.qsys
		ii) After opening qsys file, go to Generation tab, click the "Generate" button
	b) Compile the embedded Nios image
		i) Tools -> Nios II Software Build Tools for Eclipse
			I)   File -> Import -> General -> Existing Projects into Workspace -> Next
				-> Browse to checkout root directory -> check both lms_spi_controller and lms_spi_controller_bsp
				-> Finish
			II)  right click lms_spi_controller_bsp -> NIOS II -> Generate BSP
			III) right click lms_spi_controller -> Build
			IV)  right click lms_spi_controller -> Make Targets -> Build... -> select mem_init_generate -> Build
	c) Synthesize FPGA image
		i) Processing -> Start Compilation

2) Compile driver and user mode applications
	a) cd linux/kernel ; make ; insmod bladeRF.ko
	b) cd ../apps; make
	c) To program the fpga execute ./simple_load c4images/blink.rbf
		i) Load bladerf.rbf from the quartus output_files directory

3) Use bladeRF as an FSK bridge!