bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Brian Padalino f349d209eb libbladeRF: [WIP] Fixed streams for both TX and RX.
Using libusb for streams of both TX and RX.  The example
tx_async test is now for both and wil save off samples
in CSV to a file.  The code still needs to be audited
before it can be brought down to the mainline.
2013-08-18 23:58:42 -04:00
common linux_driver: Added bus/addr ioctl() support & corrected return values 2013-08-07 22:47:02 -04:00
fx3_firmware doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00
hdl Merge pull request #36 from rtucker/readme_updates 2013-07-28 11:28:13 -07:00
host libbladeRF: [WIP] Fixed streams for both TX and RX. 2013-08-18 23:58:42 -04:00
.gitignore libbladeRF: Changed some CMake debug build compiler options 2013-08-12 21:49:12 -04:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md Update top-level README.md 2013-08-17 13:35:25 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
common Source and header files common between the following components
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  4. Attach the bladeRF board to your fastest USB port.
  5. You should now be able to see your device in the list output via bladeRF-cli -p
  6. See the overview of the bladeRF-cli for more information about using the command line interface tool

Coming Soon: Quick Start information for GNU Radio support via gr-osmosdr

In the meantime, see the Building GNURADIO from GIT section of kb3gtn's bladeRF setup guide for information on this.