bladeRF USB 3.0 Superspeed Software Defined Radio Source Code
http://nuand.com
- C 45.8%
- VHDL 21%
- Verilog 15.8%
- Tcl 3.8%
- MATLAB 3.2%
- Other 10.3%
Performed cleanup and reorganization of flash-related code. The following items have been changed in the libbladeRF API: - Fixed "sector" vs "erase block" misnomer. While the SPI flash on the bladeRF has "sectors", these are not the units actually being used in the firmware to perform erase operations. As such, the API and underlying code has been updated to perform erases in terms of the "erase block" unit. - Renamed bladerf_program_flash_unaligned() to bladerf_write_flash_unaligned() for consistency. - Flash-related API calls now only return 0 on success, or a BLADERF_ERR_* value upon failure. They no longer return the number of bytes read/written/erased. This is intended to be more consistent with the rest of the API. The requested size of the read/erase/write is guaranteed to be performed at requested size, so returning a byte count merely complicates the API "contract" and offers no usefulness. - To erase the FPGA stored in SPI flash for autoloading, a new function, bladerf_erase_stored_fpga(), has been introduced. This replaces the use of bladerf_flash_fpga(dev, "X"). Internally, the following changes have been made: - All flash-related code has been moved to flash.c (e.g., from bladerf.c). This is part of the ongoing effort to move logic out of bladerf.c and into the associated module, with the intent of the bladerf.c "API top-level" of only acquiring a per-device lock (in the future) and delegate actions to the module implementations. - Backend flash operations are now in units of erase blocks and pages, to alleviate backend code needing to deal with conversions. |
||
|---|---|---|
| debian | ||
| firmware_common | ||
| fx3_firmware | ||
| hdl | ||
| host | ||
| legal | ||
| .gitignore | ||
| CMakeLists.txt | ||
| CONTRIBUTORS | ||
| COPYING | ||
| README.md | ||
bladeRF Source
This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:
| Directory | Description |
|---|---|
| firmware_common | Source and header files common between firmware and host software |
| fx3_firmware | Firmware for the Cypress FX3 USB controller |
| hdl | All HDL code associated with the Cyclone IV FPGA |
| host | Host-side libraries, drivers, utilities and samples |
Quick Start
- Clone this repository via:
git clone https://github.com/Nuand/bladeRF.git - Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
- Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
- Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
- Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
- If you haven't upgraded your firmware, run
bladeRF-flash -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
- If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see bladeRF-flash for additional details.
- You should now be able to see your device in the list output via
bladeRF-cli -p - See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool
For more information, see the bladeRF wiki