bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Robert Ghilduta 42e9d4b878 fx3 firmware: enable 32bit GPIF
Due to an unconfirmed bug in the SDK's support for the GPIF II, it is not
xpossible to switch a 16bit GPIF over to 32bit funtionality once the FX3
enumerates. As a temporary work around, the firmware now uses a 32bit GPIF bus
when loading the Cyclone 4. This introduces some issues with headless execution
because enabling 32bit mode disables the SPI peripheral, which is how the FX3
communicates with the SPI flash. Conversely, in headless mode the unit has no
need to enter 32bit mode because it is not connected via USB3.0, therefore
during headless mode the bladeRF can choose to configure the GPIF 2 into 16bit
mode.
2013-06-02 23:57:36 -07:00
common linux driver: add support for writing to the LMS, Si5388, and the VCTCXO 2013-06-02 23:57:36 -07:00
fx3_firmware fx3 firmware: enable 32bit GPIF 2013-06-02 23:57:36 -07:00
hdl hdl: add Si5338 support to the nios core 2013-06-02 23:57:34 -07:00
linux linux driver: add support for writing to the LMS, Si5388, and the VCTCXO 2013-06-02 23:57:36 -07:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README FSK bridge example 2013-02-18 20:11:39 -08:00

This README details how to build the FSK bridge example

To build and run the FSK bridge rea
1) Open existing hdl/quartus/bladerf.qsf project in Quartus
	a) Generate the Nios core
		i) Tools -> QSys -> File -> Open -> navigate to ./hdl/fpga/ip/altera/nios_system/nios_system.qsys
		ii) After opening qsys file, go to Generation tab, click the "Generate" button
	b) Compile the embedded Nios image
		i) Tools -> Nios II Software Build Tools for Eclipse
			I)   File -> Import -> General -> Existing Projects into Workspace -> Next
				-> Browse to checkout root directory -> check both lms_spi_controller and lms_spi_controller_bsp
				-> Finish
			II)  right click lms_spi_controller_bsp -> NIOS II -> Generate BSP
			III) right click lms_spi_controller -> Build
			IV)  right click lms_spi_controller -> Make Targets -> Build... -> select mem_init_generate -> Build
	c) Synthesize FPGA image
		i) Processing -> Start Compilation

2) Compile driver and user mode applications
	a) cd linux/kernel ; make ; inmod bladeRF.ko
	b) cd ../apps; make
	c) To program the fpga execute ./simple_load c4images/blink.rbf
		i) Load bladerf.rbf from the quartus output_files directory

3) Use bladeRF as an FSK bridge!