bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak 8c057b61fa libbladeRF, utils: Moving ezusb code out of lib into utils
With future license-related cleanup, all GPLv2 programs will live
in the utilities directory. As such, ezusb.c has been moved out
of the library, and the bladeRF-cli utility has been modified to
use this directly.
2013-10-21 21:05:17 -04:00
debian Remove unnecessary debian man page build step 2013-10-20 21:17:50 -04:00
firmware_common fx3_firmware: add FPGA flash based auto-load functionality 2013-10-09 01:11:08 -07:00
fx3_firmware fx3_firmware: update GPIF2 design files to match .h files 2013-10-13 16:53:39 -07:00
hdl Nuke and ignore a neglected tilde file 2013-10-19 22:12:38 -04:00
host libbladeRF, utils: Moving ezusb code out of lib into utils 2013-10-21 21:05:17 -04:00
.gitignore Nuke and ignore a neglected tilde file 2013-10-19 22:12:38 -04:00
CMakeLists.txt [FX3/Build] Added out of source build support to FX3 firmware 2013-09-27 06:40:44 +00:00
CONTRIBUTORS Updated CONTRIBUTORS 2013-09-27 21:21:12 -04:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md README: Added link to wiki and removed data getting started lnk 2013-10-19 18:51:53 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-flash -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
  • If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see bladeRF-flash for additional details.
  1. You should now be able to see your device in the list output via bladeRF-cli -p
  2. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki