bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak 6681d1a048 libbladeRF: Bumped minor rev (v0.14.0)
Note that this version introduces some reverse-incompatible changes
with respect to v0.13.z and earlier.

Changes Include:
    - Removal of bladerf_rx and bladerf_tx functions
    - Addition of a new synchronous interface that operates atop the
      asynchronous interface.
    - Renaming of stream transfer timeout functions

A friendly reminder - the v0.y.z series is officially "unstable."

Some further reverse-incompatible changes are expected to be made as
metadata support is integrated into libbladeRF. It is recommended to
avoid accessing/modifying metadata structures for the time being, as
these are subject to change.
2014-03-08 19:58:56 -05:00
debian debian: rename libbladerf0-dev -> libbladerf-dev 2013-12-29 16:05:59 -05:00
firmware_common Fix gain/phase address order 2013-12-28 15:42:48 -05:00
fx3_firmware fx3_firmware: Patch version bump to denote fixes for #195, #196 2014-01-14 22:33:49 -05:00
hdl hdl: Modified constraints of GPIF drive strength. 2014-02-01 15:01:29 -05:00
host libbladeRF: Bumped minor rev (v0.14.0) 2014-03-08 19:58:56 -05:00
legal license: License changes on various portions of the codebase 2013-10-27 00:17:35 -04:00
.gitignore Nuke and ignore a neglected tilde file 2013-10-19 22:12:38 -04:00
CMakeLists.txt cmake: FX3 firmware build is disabled by default 2013-12-21 17:36:06 -05:00
CONTRIBUTORS Updated CONTRIBUTORS 2013-09-27 21:21:12 -04:00
COPYING COPYING: Typo fix 2014-02-14 22:54:52 -05:00
README.md README: Added link to wiki and removed data getting started lnk 2013-10-19 18:51:53 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-flash -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
  • If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see bladeRF-flash for additional details.
  1. You should now be able to see your device in the list output via bladeRF-cli -p
  2. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki