bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak 9015bdbb5c libbladeRF, bladeRF-flash: Added device identifier info matching to API routines
Initializing, extracting, and comparing device identifier information
(struct bladerf_devinfo) is now exposed through the API. Among other
things, this allow users to check if a device specifier string matches a
device they already have a handle for.

To support this, a copy of bladerf_devinfo information is now kept around in
the device handle; backends are responsible for populating this in their
open() implementation. A couple of the fields were already present, so
this only adds a couple small variables worth of overhead.

Some re-arranging of the linux and libusb probe and open calls has been done
to achieve this. A few warnings and bugs were addressed in this process:

  - The Linux backend was attempting to fill in a serial number via
    a cached entry.

  - There was some potential for a read of an uninitialized portion
    of an otp buffer.

  - Missing serial # has been made non-fatal. (Some developers'
    device do not have serial numbers.)

Files associated with this functionality was moved from host/common
back into the library, which should now be used instead. bladeRF-flash
has been updated to use these new API functions.
2013-09-18 23:15:48 -04:00
firmware_common Initial JUMP_TO_BOOTLOADER support 2013-09-15 05:32:04 +00:00
fx3_firmware Bump FX3 firmware version 2013-09-15 05:32:04 +00:00
hdl hdl: Updated README.md to suggest reconfiguring dash rather than manual symlinking 2013-09-04 13:37:48 -04:00
host libbladeRF, bladeRF-flash: Added device identifier info matching to API routines 2013-09-18 23:15:48 -04:00
.gitignore Removed vim swap file that snuck in. Updated .gitignore to exlude these. 2013-08-26 21:02:59 -04:00
CONTRIBUTORS bladeRF-CLI: Perform file expansion when in interactive mode. 2013-08-28 00:20:20 -04:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md GitHub edit: Fixed additional typos in README.md 2013-08-25 14:35:18 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-cli -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
  7. You should now be able to see your device in the list output via bladeRF-cli -p
  8. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

Coming Soon: Quick Start information for GNU Radio support via gr-osmosdr

In the meantime, see the Building GNURADIO from GIT section of kb3gtn's bladeRF setup guide for information on this.