This release introduces new functionality and bug fixes, generally expanding
support for the bladeRF 2.0 Micro. It consists of the following versions:
* FPGA bitstream v0.9.0
* FX3 firmware v2.3.1
* libbladeRF v2.1.0
* bladeRF-cli v1.7.0
* MATLAB & Simulink bindings v1.0.2
* Python bindings v1.1.0
Note to bladerf1 (x40/x115) users: AGC will not work with FPGA versions
older than v0.8.0, due to a change in the control register mapping. A warning
will be printed during device initialization if you are using an affected
FPGA version.
Summary of changes since 2018.08:
* FPGA
- Support for the ADS-B core on bladeRF micro
- Add metadata flags for miniexp{1,2} IO pin status
- Fix race condition during FX3/Nios UART initialization
- Fix bugs in bladeRF AGC control
- Timing closure improvements
- Build system fixes
* FX3
- Fix USB device reset interrupting SPI flash autoloading of FPGA images
- Add BLADE_USB_CMD_QUERY_FLASH_ID command
- Add BLADE_USB_CMD_QUERY_FPGA_SOURCE command
* libbladeRF
- API additions:
- Add format macros for bladerf_frequency and bladerf_timestamp
- Add 'manufacturer' and 'product' device description strings to
bladerf_devinfo struct
- Add bladerf_get_serial_struct() API function
- Add bladerf_get_flash_size() API function
- Add bladerf_trigger_signal values for J51-1 (bladerf2) and Miniexp-1
(generic)
- Add bladerf_get_fpga_source() API function
- Add meta RX hardware flags for underflow, miniexp{1,2}
- Fixes:
- bladerf2: support TX frequencies down to 47 MHz
- bladerf2: support sample rates down to 0.521 Msps
- bladerf1: fix BLADERF_GPIO_AGC_ENABLE
- bladerf2: fix bladerf_trigger_arm implementation
- streaming: extend USB transfer timeout to match the configured stream
timeout
- Misc:
- Install the doxygen docs, if generated
- Adjust RX gain mode lists for clarity
- bladerf1: implement bladerf_{get,set}_rf_port[s]
- bladerf1: skip initialization if BLADERF_FORCE_NO_FPGA_PRESENT is set
* bladeRF-cli
- Add libedit support
- Ensure device is initialized after deferred open
- info: display manufacturer, product, flash size
- print: show RF routing on bladerf1
- print: display supported ranges for sample rate, bandwidth, frequency
- probe: handle already-open devices
- version: display FPGA configuration source
* MATLAB & Simulink bindings
- Add missing BB_TXVGA1_RXLPF loopback option
- Fix tx_gain property handling in simulink
* Python
- Fix rx_channel_count, tx_channel_count
- Update with latest API functions
* Windows installer
- install-drivers: install a driver for the bootloader VID/PID (04b4:00f3),
allowing easier FX3 bootloader recovery operations
- Upgrade to libusb 1.0.22
1352 lines
59 KiB
Text
1352 lines
59 KiB
Text
================================================================================
|
|
bladeRF Project Change Log Summary
|
|
|
|
For more detailed information, please see the git change log and issue tracker
|
|
hosted on GitHub: https://github.com/Nuand/bladeRF
|
|
================================================================================
|
|
|
|
--------------------------------------------------------------------------------
|
|
2018.10-rc1 (2018-10-30)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces new functionality and bug fixes, generally expanding
|
|
support for the bladeRF 2.0 Micro. It consists of the following versions:
|
|
|
|
* FPGA bitstream v0.9.0
|
|
* FX3 firmware v2.3.1
|
|
* libbladeRF v2.1.0
|
|
* bladeRF-cli v1.7.0
|
|
* MATLAB & Simulink bindings v1.0.2
|
|
* Python bindings v1.1.0
|
|
|
|
Note to bladerf1 (x40/x115) users: AGC will not work with FPGA versions
|
|
older than v0.8.0, due to a change in the control register mapping. A warning
|
|
will be printed during device initialization if you are using an affected
|
|
FPGA version.
|
|
|
|
Summary of changes since 2018.08:
|
|
|
|
* FPGA
|
|
- Support for the ADS-B core on bladeRF micro
|
|
- Add metadata flags for miniexp{1,2} IO pin status
|
|
- Fix race condition during FX3/Nios UART initialization
|
|
- Fix bugs in bladeRF AGC control
|
|
- Timing closure improvements
|
|
- Build system fixes
|
|
|
|
* FX3
|
|
- Fix USB device reset interrupting SPI flash autoloading of FPGA images
|
|
- Add BLADE_USB_CMD_QUERY_FLASH_ID command
|
|
- Add BLADE_USB_CMD_QUERY_FPGA_SOURCE command
|
|
|
|
* libbladeRF
|
|
- API additions:
|
|
- Add format macros for bladerf_frequency and bladerf_timestamp
|
|
- Add 'manufacturer' and 'product' device description strings to
|
|
bladerf_devinfo struct
|
|
- Add bladerf_get_serial_struct() API function
|
|
- Add bladerf_get_flash_size() API function
|
|
- Add bladerf_trigger_signal values for J51-1 (bladerf2) and Miniexp-1
|
|
(generic)
|
|
- Add bladerf_get_fpga_source() API function
|
|
- Add meta RX hardware flags for underflow, miniexp{1,2}
|
|
- Fixes:
|
|
- bladerf2: support TX frequencies down to 47 MHz
|
|
- bladerf2: support sample rates down to 0.521 Msps
|
|
- bladerf1: fix BLADERF_GPIO_AGC_ENABLE
|
|
- bladerf2: fix bladerf_trigger_arm implementation
|
|
- streaming: extend USB transfer timeout to match the configured stream
|
|
timeout
|
|
- Misc:
|
|
- Install the doxygen docs, if generated
|
|
- Adjust RX gain mode lists for clarity
|
|
- bladerf1: implement bladerf_{get,set}_rf_port[s]
|
|
- bladerf1: skip initialization if BLADERF_FORCE_NO_FPGA_PRESENT is set
|
|
|
|
* bladeRF-cli
|
|
- Add libedit support
|
|
- Ensure device is initialized after deferred open
|
|
- info: display manufacturer, product, flash size
|
|
- print: show RF routing on bladerf1
|
|
- print: display supported ranges for sample rate, bandwidth, frequency
|
|
- probe: handle already-open devices
|
|
- version: display FPGA configuration source
|
|
|
|
* MATLAB & Simulink bindings
|
|
- Add missing BB_TXVGA1_RXLPF loopback option
|
|
- Fix tx_gain property handling in simulink
|
|
|
|
* Python
|
|
- Fix rx_channel_count, tx_channel_count
|
|
- Update with latest API functions
|
|
|
|
* Windows installer
|
|
- install-drivers: install a driver for the bootloader VID/PID (04b4:00f3),
|
|
allowing easier FX3 bootloader recovery operations
|
|
- Upgrade to libusb 1.0.22
|
|
|
|
--------------------------------------------------------------------------------
|
|
2018.08 (2018-08-30)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces new functionality and bug fixes, particularly support
|
|
for the bladeRF 2.0 Micro product. It consists of the following versions:
|
|
|
|
* FPGA bitstream v0.7.3
|
|
* FX3 firmware v2.2.0
|
|
* libbladeRF v2.0.2
|
|
* bladeRF-cli v1.6.1
|
|
* MATLAB & Simulink bindings v1.0.1
|
|
* Python bindings v1.0.1
|
|
|
|
*****************************************************************************
|
|
*** libbladeRF v2.0 introduces a number of breaking changes !! ***
|
|
*****************************************************************************
|
|
*** Please see relnotes_2_0 in the Doxygen documentation for a full ***
|
|
*** discussion of the changes in libbladeRF v2.0. ***
|
|
*****************************************************************************
|
|
|
|
Summary of changes since 2016.06:
|
|
|
|
* FPGA
|
|
- Added support for Automatic Gain Control
|
|
- Redesign build system to support multiple product models
|
|
- Initial release with bladeRF Micro support
|
|
- Refactoring, bug fixes, and other misc. improvements
|
|
|
|
* FX3
|
|
- Add support for the bladeRF 2.0 (2cf0:5250).
|
|
- Fix loading FPGA bitstreams from flash when there is nothing connected to
|
|
the USB connector.
|
|
- Move USB descriptor consts to .usbdscr section so the linker glomps them.
|
|
|
|
* libbladeRF
|
|
- Added support for Automatic Gain Control
|
|
- Added bladeRF.conf config option file
|
|
- Refactor to support for multiple product lines
|
|
- Add support for the bladeRF Micro product
|
|
- API: replace bladerf_module with bladerf_channel, a reverse-compatible
|
|
change to handle products with multiple independent RF paths in the same
|
|
direction
|
|
- API: BREAKING CHANGE - on bladerf_set_frequency, et al, the frequency
|
|
parameter is now uint64_t instead of unsigned int
|
|
- Add typedefs for common param types, e.g. bladerf_frequency -> uint64_t
|
|
|
|
* bladeRF-cli
|
|
- Added support for Automatic Gain Control
|
|
- No longer initializes the bladeRF before loading a new FPGA image, to
|
|
avoid potential catch-22 problems
|
|
- bladeRF 2.0 Micro support
|
|
- Support for MIMO RX and TX using "channel=" parameter on rx/tx config
|
|
- Various code quality fixups
|
|
|
|
* MATLAB & Simulink bindings
|
|
- Add support for bladeRF 2.0 (Micro) products
|
|
- Change "not supported" (-8) library errors to Matlab warnings
|
|
temporarily, to permit some grace while others' scripts are updated.
|
|
- Update bladeRF_XCVR to use new unified gain control
|
|
- Add bladeRF_Misc for misc measurements and controls
|
|
- Update bladeRF_rx_gui to support unified gain
|
|
- Update Simulink block to match libbladeRF v2.0.0
|
|
|
|
* Python
|
|
- New in 2018.08
|
|
|
|
--------------------------------------------------------------------------------
|
|
2018.08-rc3 (2018-08-24)
|
|
--------------------------------------------------------------------------------
|
|
|
|
Bugfix release candidate.
|
|
|
|
* FPGA bitstream v0.7.3
|
|
* FX3 firmware v2.2.0
|
|
* libbladeRF v2.0.1
|
|
* bladeRF-cli v1.6.1
|
|
* MATLAB & Simulink bindings v1.0.1
|
|
* Python bindings v1.0.1
|
|
|
|
libbladeRF v2.0.1:
|
|
* Detect and handle a bladeRF Micro that is running old firmware to allow
|
|
re-flashing without recovery mode (#578)
|
|
* bladeRF1: bladerf_set_gain_mode returning BLADERF_ERR_UNSUPPORTED is no
|
|
longer fatal (#542)
|
|
* bladeRF1: only check AGC DC LUT setting when enabling AGC
|
|
* bladeRF1: typo fix in set_tx_gain (#580)
|
|
* xb200: check for null xb_data before dereferencing it (#575)
|
|
* bladeRF2: cache factory trimdac value at initialization; preserve trimdac
|
|
disable state on bladerf2_trim_dac_write (#582)
|
|
* bladeRF2: bladerf_clock_select: replace CLOCK_SELECT_VCTCXO with
|
|
CLOCK_SELECT_ONBOARD for clarity (#585)
|
|
* Improvements to the release notes (#583)
|
|
* bladeRF-cli: Add 200 ms delay before probing PLL lock status (#587)
|
|
* Windows: add a nanosleep() shim (#589)
|
|
|
|
bladeRF-cli v1.6.1:
|
|
* "set loopback" help dialog aware of board type (#566)
|
|
* host: libbladeRF: Rename clock select option
|
|
* host: bladeRF-cli: Add 200 ms delay before probing PLL lock status (#587)
|
|
* host: add nanosleep shim for Windows (#589)
|
|
|
|
MATLAB v1.0.1:
|
|
* host: libbladeRF: Rename clock select option
|
|
|
|
Python v1.0.1:
|
|
* host: libbladeRF: Rename clock select option
|
|
|
|
--------------------------------------------------------------------------------
|
|
2018.08-rc2 (2018-08-16)
|
|
--------------------------------------------------------------------------------
|
|
|
|
Minor bugfix release. Fixes packaging on Debian/Ubuntu.
|
|
|
|
* FPGA bitstream v0.7.3
|
|
* FX3 firmware v2.2.0
|
|
* libbladeRF v2.0.0
|
|
* bladeRF-cli v1.6.0
|
|
* MATLAB & Simulink bindings v1.0.0
|
|
* Python bindings v1.0.0
|
|
|
|
Fixes:
|
|
* libbladeRF: FreeBSD build fixes (#561)
|
|
* libbladeRF: 32-bit architecture fixes (#573)
|
|
|
|
--------------------------------------------------------------------------------
|
|
2018.08-rc1 (2018-08-15)
|
|
--------------------------------------------------------------------------------
|
|
|
|
Initial public release of libbladeRF v2.0, etc. Adds support for the
|
|
bladeRF 2.0 Micro.
|
|
|
|
* FPGA bitstream v0.7.3
|
|
* FX3 firmware v2.2.0
|
|
* libbladeRF v2.0.0
|
|
* bladeRF-cli v1.6.0
|
|
* MATLAB & Simulink bindings v1.0.0
|
|
* Python bindings v1.0.0
|
|
|
|
--------------------------------------------------------------------------------
|
|
2018.03-alpha1 (2018-03-26)
|
|
--------------------------------------------------------------------------------
|
|
|
|
FIXME: NEEDS A CHANGELOG SUMMARY
|
|
|
|
This version is part of development series of changes, not an official release.
|
|
|
|
* FPGA bitstream v0.7.2
|
|
* FX3 firmware v2.1.0
|
|
* libbladeRF v1.9.1
|
|
* bladeRF-cli v1.5.2
|
|
* MATLAB & Simulink bindings v0.1.3
|
|
* Python bindings v0.9.1
|
|
|
|
--------------------------------------------------------------------------------
|
|
2017.12-rc1 (2017-12-08)
|
|
--------------------------------------------------------------------------------
|
|
|
|
FIXME: NEEDS A CHANGELOG SUMMARY
|
|
|
|
* FPGA bitstream v0.7.1
|
|
* FX3 firmware v2.0.0
|
|
* libbladeRF v1.9.0
|
|
* bladeRF-cli v1.5.1
|
|
* MATLAB & Simulink bindings v0.1.2
|
|
|
|
--------------------------------------------------------------------------------
|
|
2016.06 (2016-06-29)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces new functionality and bug fixes. It consists of the
|
|
following versions:
|
|
|
|
* FPGA bitstream v0.6.0
|
|
* FX3 firmware v2.0.0
|
|
* libbladeRF v1.7.2
|
|
* bladeRF-cli v1.4.0
|
|
* MATLAB & Simulink bindings v0.1.2
|
|
|
|
New Features:
|
|
|
|
* libbladeRF, bladeRF-cli
|
|
- Added SMB clock control functionality
|
|
- Added synchronization trigger functionality
|
|
- Added XB-300 support
|
|
- Added detection for v2.0.0 firmware series (new VID/PID)
|
|
|
|
* FPGA
|
|
- Added synchronization trigger functionality using J71 header (pin 4)
|
|
- Added ADSB top-level architecture for out-of-tree ADSB core
|
|
+ https://github.com/nuand/bladeRF-adsb
|
|
|
|
* FX3
|
|
- 2.x.y series of firmware introduces new VID/PID
|
|
|
|
* libbladeRF API documentation
|
|
- Re-organized into more cohesive sections
|
|
- Added additional clarifications and corrections
|
|
|
|
* Miscellaneous:
|
|
- Windows builds updated to search for libusb 1.0.20 by default
|
|
- Added GNU Radio Companion loopback example
|
|
|
|
The following issue tracker items have been closed since 2015.01-rc1:
|
|
|
|
* Bugs:
|
|
- #474: [libbladeRF] Clarify required SMB clock port config prior to
|
|
trigger API usage
|
|
- #470: [libbladeRF] VS2012 Build failure (cannot find stdbool.h)
|
|
- #468: BLADERF_FORMAT_SC16_Q11_META docs confusing
|
|
- #466: [bladeRF-cli] First open fails when device has incompatible
|
|
FPGA/FW
|
|
- #465: [libbladeRF] TX Timeout Regression
|
|
- #462: [invalid] cmake build failure on CentOS 7.2
|
|
- #460: [libbladeRF] Explain when (not) to use bladerf_get_timestamp()
|
|
- #459: [invalid] [libbladeRF] Build failure reported on MS VS2013
|
|
- #458: [libbladerf] assertion failed in sync_worker.c, tx_callback
|
|
after bug 438 fix
|
|
- #457: [libbladeRF] bladerf_sync_tx() clears burst regardless of return
|
|
- #454: [debian] bladerf-fpga-hostedx40 leaves bad rbf file around if
|
|
the download fails
|
|
- #453: [bladeRF-cli] Automatic DC Calibration does not appear to apply
|
|
nominal value
|
|
- #450: host/common items missing extern "C" { ... }
|
|
- #448: Build broken on big-endian targets
|
|
- #446: Wrong loopback mode name for Simulink IF
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
|
|
* Enhancement:
|
|
- #463: Adding SignalTap in scripted build
|
|
- #403: LibbladeRF support for setting MIMO mode
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini
|
|
Expansion Header
|
|
- #174: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
* Other:
|
|
- #432: Error building on Pi
|
|
|
|
Outstanding issue tracker items:
|
|
* Bugs:
|
|
- #475: [libbladeRF] Windows 10 builds fail if CyFX3 SDK is present
|
|
- #473: [Windows][libbladeRF][duplicate] Triggered TX Stalls on Cypress
|
|
Backend
|
|
- #472: [libbladeRF, FX3] bladerf_device_reset() does not allow
|
|
libbladeRF to close device cleanly
|
|
- #471: [nios] VCTCXO Trim DAC Readback is implemented incorrectly
|
|
- #464: [bladeRF-cli] `probe` can't access already opened devices
|
|
(libusb, Windows)
|
|
- #447: Build broken on MSVC2015 (ptheads timespec conflict)
|
|
- #443: [libbladeRF] Cypress backend timeouts & receiving NULL buffers
|
|
upon transfer completion
|
|
- #442: [FX3 Firmware] Jump to bootloader after NULL interface is
|
|
restored
|
|
- #427: [libbladeRF] Cannot set some samplerates returned by
|
|
bladerf_set_rational_rate()
|
|
- #408: [libbladeRF] Device hangs after repeated open/stream/close
|
|
- #401: libusb detection fails when x-compiling for Android
|
|
- #390: Warning after running rx start when loopback=firmware
|
|
- #360: [hdl] Older FPGA revisions no longer build
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks
|
|
with Windows & libusb 1.0.19
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
|
|
* Enhancements:
|
|
- #452: [Simulink] Integrate Signal Specification to RX
|
|
- #439: [libbladeRF] Move submit_stream_buffer implementations up a
|
|
layer. (Has pending PR #467)
|
|
- #431: Halfband filtering
|
|
- #430: Fs/4 Mix
|
|
- #428: Low-rate stream formats
|
|
- #416: Add CMake project config files
|
|
- #395: [hdl] Timing Closure on LMS6 SPI interface
|
|
- #382: 'bladerf_get_serial()' fixed buffer size should be ideally
|
|
handled in the API
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
|
|
* Other:
|
|
- #388: [FX3 Firmware] Investigate USB3 drive controls
|
|
- #344: [fx3] Investigate/fix field checksums
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
|
|
--------------------------------------------------------------------------------
|
|
2016.01-rc1 (2016-01-07)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces new functionality and bug fixes. It consists of the
|
|
following versions:
|
|
|
|
* FPGA bitstream v0.5.0
|
|
* FX3 firmware v1.9.0
|
|
* libbladeRF v1.5.1
|
|
* bladeRF-cli v1.3.1
|
|
* MATLAB & Simulink bindings v0.1.1
|
|
|
|
New Features:
|
|
|
|
* MATLAB & Simulink
|
|
- An object-oriented MATLAB interface has been introduced. This is
|
|
implemented as bindings atop of libbladeRF, and will be maintained
|
|
alongside libbladeRF in the libbladeRF_bindings/matlab directory.
|
|
|
|
- Simulink support is provided via the above MATLAB interface
|
|
and the Simulink System Object block.
|
|
|
|
* libbladeRF, bladeRF-cli:
|
|
- XB-100 support added
|
|
|
|
* FPGA, libbladeRF, bladeRF-cli:
|
|
- A 1.8V 1 PPS or 10 MHz input may be supplied to the device to
|
|
tame the on-board VCTCXO
|
|
|
|
* FX3 Firmware, libbladeRF, bladeRF-cli:
|
|
- A simple logging mechanism has been introduced. This allows the
|
|
host to retrieve error codes and the source lines at which they occurred.
|
|
|
|
* FX3 Firmware:
|
|
- Updated for Cypress FX3 SDK v1.3.3
|
|
|
|
* Miscellaneous:
|
|
- Revised and MIT-licensed DC calibration routines are now available
|
|
in host/common/.
|
|
|
|
|
|
The following issue tracker items have been closed since the 2015.07 release:
|
|
|
|
* Pull Requests:
|
|
- #437: debian: firmware to v1.8.1, fpga to v0.4.1
|
|
- #433: Add a libbladeRF helper function for setting the `rx_mux`
|
|
setting in the FPGA
|
|
- #424: Add support for setting SMB clock output to arbitrary
|
|
frequency
|
|
- #421: bladeRF-cli improvement and xb-200 filter fixes
|
|
- #419: Minimal changeset for bladeRF to build on freebsd
|
|
- #381: Rpm packaing [CAA Needed]
|
|
- #379: Indent [wontfix]
|
|
- #267: Adjust nios simulation component so it matches the
|
|
synthesis version
|
|
|
|
* Bugs:
|
|
- #438: [libbladeRF] bladerf_sync_tx() is limited by # xfers,
|
|
not # buffers
|
|
- #436: [bladeRF-cli][libbladeRF] `cal dc tx` crashes when using
|
|
Cypress backend
|
|
- #426: XB-200 Reference Clock and MIMO Master clock are mutually
|
|
exclusive
|
|
- #425: [bladeRF-cli] Perform DC Cal with RX/TX frequencies separated
|
|
by >= 1 MHz
|
|
- #423: [bladeRF-cli] Add 'xb_spi', 'xb_gpio', and 'xb_gpio_dir' to
|
|
print/set help text
|
|
- #422: [bladeRF-cli] Make 'help print' and 'help set' formatting match
|
|
- #420: libbladeRF_test: Build broken for big endian hosts
|
|
- #417: libbladeRF: Tuning warnings and failures
|
|
- #416: [libbladeRF] Format specifier typos in nios_access.c
|
|
- #415: [libbladeRF] add/data mismatch in nio_access.c verbose log
|
|
messages
|
|
- #412: [bladeRF-cli] Calibration often fails
|
|
- #373: "trap divide error" while generating calibration table in CLI:
|
|
cal table dc rx
|
|
- #362: Calibration table generation hangs, performance issues
|
|
|
|
* Enhancements:
|
|
- #414: 10 MHz reference clock support
|
|
- #410: [libbladeRF] Provide a separate "Access denied" error code
|
|
- #409: [bladeRF-cli] Report file access issues prior to DC cal table
|
|
procedure
|
|
- #387: FPGA GPIO Bindings to BladeRF / Osmocom Library
|
|
- #353: [bladeRF-cli, libbladeRF] Improve jump_to_boot docs
|
|
and implementation
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
|
|
* Other:
|
|
- #399: Update libbladeRF and FX3 FIrmware for Cypress FX3 SDK 1.3.3
|
|
support
|
|
- #342: [Installer] Windows installer doesn't ship 32-bit MATLAB
|
|
support [wontfix]
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when
|
|
possible
|
|
|
|
Outstanding issue tracker items:
|
|
|
|
* Bugs:
|
|
- #443: [libbladeRF] Cypress backend receiving NULL buffers upon
|
|
transfer completion
|
|
- #442: [FX3 Firmware] Jump to bootloader after NULL interface is restored
|
|
- #427: [libbladeRF] Cannot set some samplerates returned by
|
|
bladerf_set_rational_rate()
|
|
- #408: [libbladeRF] Device hangs after repeated open/stream/close
|
|
- #401: libusb detection fails when x-compiling for Android
|
|
- #390: Warning after running rx start when loopback=firmware
|
|
- #360: [hdl] Older FPGA revisions no longer build
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks with
|
|
Windows & libusb 1.0.19
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
|
|
* Enhancements:
|
|
- #439: [libbladeRF] Move submit_stream_buffer implementations up a layer
|
|
- #431: Halfband filtering
|
|
- #430: Fs/4 Mix
|
|
- #428: Low-rate stream formats
|
|
- #418: Add CMake project config files
|
|
- #403: LibbladeRF support for setting MIMO mode
|
|
- #395: [hdl] Timing Closure on LMS6 SPI interface
|
|
- #388: [FX3 Firmware] Investigate USB3 drive controls
|
|
- #382: 'bladerf_get_serial()' fixed buffer size should be
|
|
ideally handled in the API
|
|
- #344: [fx3] Investigate/fix field checksums
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO
|
|
using Mini Expansion Header
|
|
- #174: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
--------------------------------------------------------------------------------
|
|
2015.07 (2015-07-25)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces minor feature additions and bug fixes. It consists of
|
|
the following versions:
|
|
|
|
* FPGA bitstream v0.3.4
|
|
* FX3 firmware v1.8.0
|
|
* libbladeRF v1.4.3
|
|
* bladeRF-cli v1.2.1
|
|
|
|
|
|
New Features:
|
|
|
|
* libbladeRF:
|
|
- bladerf_open() and bladerf_open_with_devinfo() support matching a
|
|
device via a subset of its serial number.
|
|
|
|
For example, the bladeRF-cli uses bladerf_open() to open a specifed
|
|
device, so the following can now be used to open a device with the
|
|
serial number, f12ce1037830a1b27f3ceeba1f521413:
|
|
|
|
bladeRF-cli -i -d "*:serial=f12"
|
|
|
|
* Miscellaneous
|
|
- Added Octave/MATLAB routines to import/export data from files
|
|
containing complex samples from GNU Radio.
|
|
|
|
|
|
The following tracker items have been closed since the 2015.06-rc1 release:
|
|
|
|
* Pull Requests:
|
|
- #402: fixup debian/changelog
|
|
|
|
* Bugs:
|
|
- #413: [libbladeRF] Bursts must end with 3 zero samples, not 2.
|
|
- #411: [libbladeRF] File search uses hardcoded /usr/share and /etc,
|
|
should use install prefix
|
|
- #405: lms.c: Fail to correctly exit loopback mode for f >= 1.5 GHz
|
|
- #404: [libbladeRF] XB-200 filter bank selection regression in 41476cb
|
|
- #400: [hdl] ATSC FPGA build broken
|
|
|
|
* Enhancements:
|
|
- #396: [libbladeRF] Match a subset of serial number
|
|
|
|
* Other:
|
|
- #407: Setting Loopback resets/changes Rx module frequency [duplicate]
|
|
- #406: Persistent timeouts after using API [invalid]
|
|
- #397: [libbladeRF] API call to reset timestamps [wontfix]
|
|
|
|
|
|
Outstanding issue tracker items:
|
|
|
|
* Pull Requests:
|
|
- #381: RPM packaging
|
|
- #379: Indent
|
|
- #267: Adjust nios simulation component so it matches the
|
|
synthesis version
|
|
|
|
* Bugs:
|
|
- #412: [bladeRF-cli] Calibration often fails
|
|
- #408: [libbladeRF] Device hangs after repeated open/stream/close
|
|
- #401: libusb detection fails when x-compiling for Android
|
|
- #400: [hdl] ATSC FPGA build broken
|
|
- #399: Update libbladeRF and FX3 Firmware for Cypress FX3 SDK 1.3.3
|
|
support
|
|
- #395: [hdl] Timing Closure on LMS6 SPI interface
|
|
- #390: Warning after running rx start when loopback=firmware
|
|
- #373: "trap divide error" while generating calibration table in
|
|
CLI: cal table dc rx
|
|
- #362: Calibration table generation hangs, performance issues
|
|
- #360: [hdl] Older FPGA revisions no longer build
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks with
|
|
Windows & libusb 1.0.19
|
|
- #342: [Installer] Windows installer doesn't ship 32-bit MATLAB support
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
|
|
* Enhancements:
|
|
- #410: [libbladeRF] Provide a separate "Access denied" error code
|
|
- #409: [bladeRF-cli] Report file access issues prior to DC cal table
|
|
procedure
|
|
- #403: LibbladeRF support for setting MIMO mode
|
|
- #387: FPGA GPIO Bindings to BladeRF / Osmocom Library
|
|
- #382: 'bladerf_get_serial()' fixed buffer size should be ideally
|
|
handled in the API
|
|
- #386: android usb bindings
|
|
- #353: [bladeRF-cli, libbladeRF] Improve jump_to_boot docs and
|
|
implementation
|
|
- #344: [fx3] Investigate/fix field checksums
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when possible
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini
|
|
Expansion Header
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #174: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
* Other:
|
|
- #388: [FX3 Firmware] Investigate USB3 drive controls
|
|
|
|
--------------------------------------------------------------------------------
|
|
2015.06-rc1 (2015-06-30)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces new features and bug fixes. It consists of the
|
|
following versions:
|
|
|
|
* FPGA bitstream v0.3.3
|
|
* FX3 firmware v1.8.0
|
|
* libbladeRF v1.4.0
|
|
* bladeRF-cli v1.2.0
|
|
|
|
New Features:
|
|
|
|
* FPGA & libbladeRF:
|
|
- Configurable tuning modes: host and fpga
|
|
- Scheduled retune: retune module at specified sample timestamp
|
|
- Quick retune: retune using previously identified tuning parameters
|
|
- Readback of current VCTCXO trim DAC setting
|
|
|
|
* bladeRF-cli:
|
|
- Semicolon command separators
|
|
- Added 'print trimdac' implementation
|
|
|
|
|
|
The following tracker items have been closed since the 2015.02 release:
|
|
|
|
* Pull Requests:
|
|
- #383: rm dead code from xb.c
|
|
- #358: bladeRF-cli: Can now specify multiple commands separated by
|
|
semicolon
|
|
- #313: merge dev-quartus14 branch
|
|
|
|
* Bugs:
|
|
- #394: Cannot switch from XB-200 "auto" back to a specific band
|
|
- #385: libbladeRF: TX PLL Instability @ 1.8602 GHz
|
|
- #384: Documentation bug
|
|
- #380: bladerf_set_tx_gain() is a deprecated symbol
|
|
|
|
* Enhancements:
|
|
- #398: [libbladeRF] VCTCXO readback support
|
|
- #393; [libbladeRF] Migrate to new NIOS packet handler formats
|
|
- #392: [nios] Implement pkt_<addr width>x<data width> handlers.
|
|
- #391: [FPGA] Custom LMS6002D SPI controller
|
|
- #380: bladerf_set_tx_gain() is a deprecated symbol
|
|
- #378: [libbladeRF] Support zero-padding within a timestamped burst
|
|
- #345: [bladeRF-cli] Accept semi-colon command delimeters
|
|
- #282: [libbladeRF] Move get/set_lms_correction() and
|
|
get/set_fpga_correction() logic
|
|
- #213: CLI should show sample file information for TX [wontfix]
|
|
- #200: Reserved addresses for firmware customization
|
|
|
|
* Other:
|
|
- #389: libbladeRF: Investigate LMS6002D OFFUP/OFFDOWN values
|
|
- #377: Timeout trying to update from firmware 1.5.3
|
|
|
|
|
|
Outstanding issue tracker items:
|
|
|
|
* Pull Requests:
|
|
- #381: RPM packaging
|
|
- #379: Indent
|
|
- #267: Adjust nios simulation component so it matches the
|
|
synthesis version
|
|
|
|
* Bugs:
|
|
- #401: libusb detection fails when x-compiling for Android
|
|
- #400: [hdl] ATSC FPGA build broken
|
|
- #399: Update libbladeRF and FX3 FIrmware for Cypress FX3 SDK 1.3.3
|
|
support
|
|
- #395: [hdl] Timing Closure on LMS6 SPI interface
|
|
- #390: Warning after running rx start when loopback=firmware
|
|
- #373: "trap divide error" while generating calibration table in
|
|
CLI: cal table dc rx
|
|
- #362: Calibration table generation hangs, performance issues
|
|
- #360: [hdl] Older FPGA revisions no longer build
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks with
|
|
Windows & libusb 1.0.19
|
|
- #342: [Installer] Windows installer doesn't ship 32-bit MATLAB support
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
|
|
* Enhancements:
|
|
- #397: [libbladeRF] API call to reset timestamps
|
|
- #396: [libbladeRF] Match a subset of serial number
|
|
- #387: FPGA GPIO Bindings to BladeRF / Osmocom Library
|
|
- #382: 'bladerf_get_serial()' fixed buffer size should be ideally
|
|
handled in the API
|
|
- #386: android usb bindings
|
|
- #353: [bladeRF-cli, libbladeRF] Improve jump_to_boot docs and
|
|
implementation
|
|
- #344: [fx3] Investigate/fix field checksums
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when possible
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini
|
|
Expansion Header
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #174: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
* Other:
|
|
- #388: [FX3 Firmware] Investigate USB3 drive controls
|
|
|
|
--------------------------------------------------------------------------------
|
|
2015.02 (2015-02-28)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces build fixes. It consists the following versions:
|
|
* FPGA bitstream v0.1.2
|
|
* FX3 firmware v1.8.0
|
|
* libbladeRF v1.2.1
|
|
* bladeRF-cli v1.1.2
|
|
|
|
The following tracker items have been closed since the 2015.01-rc2 release:
|
|
* Pull Requests:
|
|
- #376: Code-generator for bladeRF-CLI made more robust
|
|
|
|
* Bugs:
|
|
- #375: Build error - missing defines
|
|
- #374: Several issues when cross compiling host tools and libs for
|
|
windows on a linux system via MinGW
|
|
- #369: Interactive documentation fails to compile
|
|
|
|
* Other:
|
|
- #377: Timeout trying to update from firmware 1.5.3 (invalid)
|
|
|
|
|
|
Outstanding issue tracker items:
|
|
|
|
* Pull Requests:
|
|
- #358: bladeRF-cli: Can now specify multiple commands separated by
|
|
semicolon
|
|
- #313: merge dev-quartus14 branch
|
|
- #267: Adjust nios simulation component so it matches the synthesis
|
|
version
|
|
|
|
* Bugs:
|
|
- #373: "trap divide error" while generating calibration table in
|
|
CLI: cal table dc rx
|
|
- #372: Calibration table generation hangs, performance issues
|
|
- #360: [hdl] Older FPGA revisions no longer build
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks with
|
|
Windows & libusb 1.0.19
|
|
- #342: [Installer] Windows installer doesn't ship 32-bit MATLAB support
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
|
|
* Enhancements:
|
|
- #378: [libbladeRF] Support zero-padding within a timestamped burst
|
|
- #353: [bladeRF-cli, libbladeRF] Improve jump_to_boot docs and
|
|
implementation
|
|
- #345: [bladeRF-cli] Accept semi-colon command delimeters
|
|
- #344: [fx3] Investigate/fix field checksums
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #282: [libbladeRF] Move get/set_lms_correction() and
|
|
get/set_fpga_correction() logic
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when
|
|
possible
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using
|
|
MiniExpansion Header
|
|
- #213: CLI should show sample file information for TX
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #200: Reserved addresses for firmware customization
|
|
- #174: Task: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
--------------------------------------------------------------------------------
|
|
2015.01-rc2 (2015-01-31)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release candidate introduces a number of libbladeRF fixes and
|
|
improvements, as well as some minor bladeRF-cli fixes. See the CHANGELOG files
|
|
associated with these items for more details.
|
|
|
|
This release consists of the following versions:
|
|
* FPGA bitstream v0.1.2
|
|
* FX3 firmware v1.8.0
|
|
* libbladeRF v1.2.0
|
|
* bladeRF-cli v1.1.1
|
|
|
|
Major changes include:
|
|
* libbladeRF fix for issue #95, in which device required power-on reset
|
|
after an application crashed without properly closing the device handle.
|
|
* libbladeRF changes to initial LMS state address signal quality issues
|
|
* BLADERF_LOG_LEVEL environment variable and optional syslog support have
|
|
been added to libbladeRF.
|
|
* Documentation build fix for bladeRF-cli.
|
|
|
|
The following tracker items have been closed since the 2014.12-rc1 release:
|
|
* Pull Requests:
|
|
- #371: NixOS distro build fixes
|
|
- #340: On non-Windows systems, send logs to syslog & stderr.
|
|
|
|
* Bugs:
|
|
- #372: [libbladeRF] Signal attenuation with XB-200
|
|
- #370: [libbladeRF] LMS DC calibration settings stored in calibration
|
|
tables only gets loaded once
|
|
- #366: [libbladeRF] Power down DC calibration comparators to improve
|
|
signal quality
|
|
- #365: host: Don't redefine inline unless __cplusplus is defined
|
|
- #364: libbladeRF: Can't probe for already opened device when using
|
|
CyUSB backend
|
|
- #95: linux kernel/FX3: Not enough bandwidth for altsetting
|
|
|
|
* Enhancements:
|
|
- #343: [libbladeRF] Name worker threads (wontfix)
|
|
|
|
* Other:
|
|
- #368: Make BLADERF_ERR_* a enum type (wontfix)
|
|
- #367: Make FPGA Autoloading fault tolerant (invalid)
|
|
- #363: FPGA bitstream autoload fails occasionally (invalid)
|
|
|
|
Outstanding pull requests, tasks, enhancement requests, and known issues are
|
|
listed below. Please see the issue tracker for up-to-date information on
|
|
these and their associated schedules.
|
|
|
|
* Pull Requests:
|
|
- #358: bladeRF-cli: Can now specify multiple commands separated by
|
|
semicolon
|
|
- #313: merge dev-quartus14 branch
|
|
- #267: Adjust nios simulation component so it matches the synthesis
|
|
version
|
|
|
|
* Bugs:
|
|
- #360: [hdl] Older FPGA revisions no longer build
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks with
|
|
Windows & libusb 1.0.19
|
|
- #342: [Installer] Windows installer doesn't ship 32-bit MATLAB support
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
|
|
* Enhancements:
|
|
- #353: [bladeRF-cli, libbladeRF] Improve jump_to_boot docs and
|
|
implementation
|
|
- #345: [bladeRF-cli] Accept semi-colon command delimeters
|
|
- #344: [fx3] Investigate/fix field checksums
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #282: [libbladeRF] Move get/set_lms_correction() and
|
|
get/set_fpga_correction() logic
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when
|
|
possible
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using
|
|
MiniExpansion Header
|
|
- #213: CLI should show sample file information for TX
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #200: Reserved addresses for firmware customization
|
|
- #174: Task: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
--------------------------------------------------------------------------------
|
|
2014.12-rc1 (2014-12-23)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release candidate introduces some minor additions to libbladeRF and the
|
|
bladeRF-cli program. See the CHANGELOG items associated with these items for
|
|
more details.
|
|
|
|
This release consists of the following versions:
|
|
* FPGA bitstream v0.1.2
|
|
* FX3 firmware v1.8.0
|
|
* libbladeRF v1.1.0
|
|
* bladeRF-cli v1.1.0
|
|
|
|
Major changes include:
|
|
* Introduction of libbladeRF support for bootloader detection and recovery.
|
|
With this change, the Cypress backend should now be fully-functional.
|
|
* Added libbladeRF file search path options (e.g., for host-based FPGA
|
|
autoloading).
|
|
* Moved message about detecting devices in bootloader mode to bladeRF-cli.
|
|
This was original printed by some lower-level libbladeRF code, and deemed
|
|
more appropriately located in the bladeRF-cli program.
|
|
|
|
The following tracker items have been closed since the 2014.11 release:
|
|
|
|
* Enhancement requests:
|
|
- #361: Make bladeRF-cli --probe vary its exit status based on whether
|
|
a device was found or not
|
|
- #359: [libbladeRF] Migrate bootloader recovery support to libbladeRF
|
|
- #349: [libbladeRF] Add current directory and env vars to file search
|
|
path
|
|
|
|
|
|
Outstanding pull requests, tasks, enhancement requests, and known issues are
|
|
listed below. Please see the issue tracker for up-to-date information on
|
|
these and their associated schedules.
|
|
|
|
* Pull Requests:
|
|
- #358: bladeRF-cli: Can now specify multiple commands separated by
|
|
semicolon
|
|
- #340: On non-Windows systems, send logs to syslog & stderr.
|
|
- #313: merge dev-quartus14 branch
|
|
- #267: Adjust nios simulation component so it matches the synthesis
|
|
version
|
|
|
|
* Bugs:
|
|
- #360: [hdl] Older FPGA revisions no longer build
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks
|
|
with Windows & libusb 1.0.19
|
|
- #342: [Installer] Windows installer doesn't ship 32-bit MATLAB
|
|
support
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
- #95: linux kernel/FX3: Not enough bandwidth for altsetting
|
|
|
|
* Enhancements:
|
|
- #353: [bladeRF-cli, libbladeRF] Improve jump_to_boot docs and
|
|
implementation
|
|
- #345: [bladeRF-cli] Accept semi-colon command delimeters
|
|
- #344: [fx3] Investigate/fix field checksums
|
|
- #343: [libbladeRF] Name worker threads
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #282: [libbladeRF] Move get/set_lms_correction() and
|
|
get/set_fpga_correction() logic
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when
|
|
possible
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using
|
|
MiniExpansion Header
|
|
- #213: CLI should show sample file information for TX
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #200: Reserved addresses for firmware customization
|
|
- #174: Task: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
2014.11 (2014-11-30)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This release introduces a stable libbladeRF API and various fixes.
|
|
|
|
No further reverse-incompatible API changes are currently scheduled. Should such
|
|
changes be required in the future, they will be denoted through a major version
|
|
number increment.
|
|
|
|
This release consists of the following versions:
|
|
* FPGA bitstream v0.1.2
|
|
* FX3 firmware v1.8.0
|
|
* libbladeRF v1.0.0
|
|
* bladeRF-cli v1.0.0
|
|
|
|
|
|
Major fixes include:
|
|
* libbladeRF now waits for SPI flash autoloading to complete when
|
|
opening a device. This requires FX3 Firmware v1.8.0.
|
|
* FPGA v0.1.2 includes fixes in timestamp functionality.
|
|
* An issue causing SPI flash corruption when using libusb with the WinUSB
|
|
driver has been addressed.
|
|
|
|
|
|
The following issue tracker items have been closed since the 2014.11-rc3
|
|
release:
|
|
|
|
* Pull requests:
|
|
- #357: debian: split udev rule into its own package
|
|
- #356: debian package updates for libbladerf1
|
|
- #350: debian: fw 1.8.0, fpga 0.1.2, HTTPS
|
|
- #338: debian: allow libtecla-dev to satisfy build deps
|
|
|
|
* Bugs:
|
|
- #355: [libbladeRF] Windows firmware flashing fails with WinUSB
|
|
- #351: [libbladeRF] Device locks up when simultaneously tuning freq
|
|
and RX'ing
|
|
- #348: [Windows] Cypress backend causes build failures in VS2010
|
|
- #347: [libbladeRF] Header issue in Windows
|
|
- #341: LMS Failures persist after FPGA v0.1.1
|
|
- #339: [libbladeRF] file_ops.c should use $HOME before getpwuid()
|
|
- #337: host: Windows builds should copy license files into output
|
|
directory
|
|
- #336: [libbladeRF] Loading calibration tables does not set LMS DC cal
|
|
registers
|
|
- #335: [hdl] Initial bursts with TX_NOW corrupted
|
|
- #334: [hdl] Bursts corrupted when switching between TX_NOW and
|
|
scheduled bursts
|
|
- #333: [Cygwin] libusb and libc version checks fail to compile
|
|
- #332: Build fails in Cygwin
|
|
- #325: Calibration issue: "cal: Invalid module provided (lms)"
|
|
[Invalid]
|
|
- #320: BladeRF USB crashes on Beaglebone Black, Ubuntu 14.04
|
|
[Invalid]
|
|
- #318: Board occasionally fails to boot on computer power up [Invalid]
|
|
- #317: FPGA autoload fails when USB device is open before FPGA is
|
|
fully configured
|
|
- #307: [hdl] RX and TX timestamp offset variation
|
|
- #304: [bladeRF-cli] TX DC autocalibration/correction fails
|
|
- #291: Missing RX Samples
|
|
- #265: [hdl] Incorect metadata position in the RX Stream
|
|
|
|
* Enhancements:
|
|
- #105: Develop testing guidelines on new releases
|
|
|
|
Outstanding pull requests, tasks, enhancement requests, and known issues are
|
|
listed below. Please see the issue tracker for up-to-date information on
|
|
these and their associated schedules.
|
|
|
|
|
|
* Pull Requests:
|
|
- #358: bladeRF-cli: Can now specify multiple commands separated by
|
|
semicolon
|
|
- #340: On non-Windows systems, send logs to syslog & stderr.
|
|
- #313: merge dev-quartus14 branch
|
|
- #257: Adjust nios simulation component so it matches the synthesis
|
|
version
|
|
|
|
* Bugs:
|
|
- #354: [hdl] failure to include STP file due to talkback req ought to
|
|
be fatal
|
|
- #352: [libbladeRF] Intermittent out-of-order transfer callbacks with
|
|
Windows & libusb 1.0.19
|
|
- #342: [Installer] Windows installer doesn't ship 32-bit MATLAB support
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
- #95: linux kernel/FX3: Not enough bandwidth for altsetting
|
|
|
|
* Enhancements:
|
|
- #353: [bladeRF-cli, libbladeRF] Improve jump_to_boot docs and
|
|
implementation
|
|
- #349: [libbladeRF] Add current directory and env vars to file search
|
|
path
|
|
- #345: [bladeRF-cli] Accept semi-colon command delimeters
|
|
- #343: [libbladeRF] Name worker thread
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #282: [libbladeRF] Move get/set_lms_correction() and
|
|
get/set_fpga_correction() logic
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when possible
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini
|
|
Expansion Header
|
|
- #213: CLI should show sample file information for TX
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #200: Reserved addresses for firmware customization
|
|
- #174: Task: Migrate FX3 build to CMake-generated Makefile
|
|
|
|
--------------------------------------------------------------------------------
|
|
2014.11-rc3 (2014-10-30)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This 2014.11-rc3 release candidate introduces the remaining functionality
|
|
originally intended for a 2014.09 release, as well as a number of improvements
|
|
and bug fixes. As denoted by the name, the release has been rescheduled for
|
|
November 2014.
|
|
|
|
This release candidate consists of the following versions:
|
|
* FPGA bitstream v0.1.1
|
|
* FX3 firmware v1.7.1
|
|
* libbladeRF v0.17.0
|
|
* bladeRF-cli v0.12.0
|
|
|
|
Major changes and additions include:
|
|
* Timestamp metadata support for the libbladeRF synchronous interface
|
|
- Example code is included in the API documentation and available
|
|
in the libbladeRF/doc/examples directory.
|
|
- This is tightly-coupled with functionality and fixes introduced
|
|
by FPGA v0.1.1.
|
|
|
|
* A majority of libbladeRF functions have been made thread-safe.
|
|
|
|
* libbladeRF support for a Cypress CyUSB3/CyAPI-based backend
|
|
- This backend has been found to be a useful alternative on some
|
|
systems with USB3 controllers that exhibit issues with the libusb
|
|
backend implementation.
|
|
|
|
* Fixes for LMS DC calibration issues
|
|
- FPGA fixes in v0.1.1 have addressed a timing issue that corrupted
|
|
LMS register readbacks. This fixes issue #269, in which LMS DC
|
|
calibration registers would become corrupted and read back as 31's.
|
|
- A bladeRF-cli change in v0.12.0 fixed issue #304, where TX DC
|
|
calibration would fail, reporting that invalid values were
|
|
encountered.
|
|
|
|
The remaining window of time up to the first official release is intended for
|
|
documentation improvements and bug fixes. New features or major changes will be
|
|
held off until the following cycle; they may be staged in a master-next branch
|
|
if needed.
|
|
|
|
The following issue tracker items have been closed since 2014.09-rc2. Issues
|
|
are listed first, with associated pull request items second, if relevant.
|
|
|
|
* Pull requests:
|
|
- #326: only use the relative path for logging .c filenames; enable it
|
|
by default
|
|
- #308: Allow #-style comments in bladeRF-cli
|
|
- #303: libbladeRF: update README cmake options
|
|
- #293: debian: update changelog w/ 2014.09-rc{1,2}
|
|
|
|
* Bugs:
|
|
- #336: [libbladeRF] Loading calibration tables does not set LMS DC cal
|
|
registers
|
|
- #333: [Cygwin] libusb and libc version checks fail to compil
|
|
- #332: Build fails in Cygwin
|
|
- #331: [libbladeRF] Enforce exclusive device access in Cypress backend
|
|
- #330: [libbladeRF] Cannot open multiple devices via 'open any' request
|
|
- #329: [cmake] 34151f6 breaks configuration for some CMake versions
|
|
- #327: [libbladeRF] It is possible to get "stuck" with an FPGA < v0.0.1
|
|
- #325: Calibration issue: "cal: Invalid module provided (lms)"[Invalid]
|
|
- #324: [libbladeRF] Deadlock in bladerf_sync_tx on Windows
|
|
- #323: [libbladeRF] bladerf_sync_config() does not set
|
|
dev->transfer_timeout[module]
|
|
- #322: [libbladeRF] libusb.c doesn't check for timeout_ms = 0 in buffer
|
|
submission
|
|
- #320: BladeRF USB crashes on Beaglebone Black, Ubuntu 14.04 [Invalid]
|
|
- #318: Board occasionally fails to boot on computer power
|
|
up [Invalid]
|
|
- #309: [libbladeRF] XB-100 attach shouldn't succeed
|
|
- #305/#306,#315: mingwbuild of libbladeRF fails on file_ops.c(ShlObj.h)
|
|
- #304: [bladeRF-cli] TX DC autocalibration/correction fails
|
|
- #295/#296: Update references to bladeRF-flash in top-level README.md
|
|
and man page(s)
|
|
- #292/#296: cmake ignores user input
|
|
- #291: Missing RX Samples
|
|
- #290/#294: [bladeRF-cli] TX help typo
|
|
- #285/#298: [libbladeRF] Update CMake options in README.md
|
|
- #283: "bladeRF-cli --version" hangs and segfaults on Debian 7 in
|
|
Virtualbox
|
|
- #279: [libbladeRF] MACOSX_RPATH is not specified
|
|
- #278: cmd_help.h generator breaks osx build
|
|
- #277: bladeRF-cli: Make 'print <parameter>' output more consistent
|
|
- #269: [libbladeRF] RXVGA2 DC autocalibration intermittently returns 31
|
|
for all values
|
|
- #260: [hdl] RX I Samples value 0
|
|
- #255: Avoid obsolete samples in the RX Stream
|
|
|
|
* Enhancements:
|
|
- #314: "make uninstall" cannot find install manifest
|
|
- #312: [libbladeRF] Regression in USB 2.0 operation
|
|
- #311/316: [bladeRF-cli] Move FPGA and device handle checks to common
|
|
code in cmd.c
|
|
- #310: [libbladeRF] Add suport for disabling an XB [Won't Fix]
|
|
- #299: Task: Provide .md5 and .sha256sum files with pre-built binaries
|
|
- #289: libusb/windows. (Version compatibity)
|
|
- #288/#302: [bladeRF-cli] XB-200 Filterbank Control
|
|
- #252: [bladeRF-cli] Migrate rx/tx command implementations to
|
|
libbladeRF's sync i/f
|
|
- #250: [libbladeRF] Implement Cypress API-based backend
|
|
|
|
Outstanding pull requests, tasks, enhancement requests, and known issues as
|
|
of RC3 listed below. Please see the issue tracker for up-to-date information on
|
|
these and their associated schedules.
|
|
|
|
* Pull requests:
|
|
- #313: merge dev-quartus14 branch
|
|
- #267: Adjust nios simulation component so it matches the synthesis
|
|
version
|
|
|
|
* Bugs:
|
|
- #335: [hdl] Initial bursts with TX_NOW corrupted
|
|
- #334: [hdl] Bursts corrupted when switching between TX_NOW and
|
|
scheduled bursts
|
|
- #317: FPGA autoload fails when USB device is open before FPGA is
|
|
fully configured
|
|
- #307: [hdl] RX and TX timestamp offset variation
|
|
- #301: Direct sampling with XB-200 needs additional improvements
|
|
- #265: [hdl] Incorect metadata position in the RX Stream
|
|
- #95: Linux kernel/FX3: Not enough bandwidth for altsetting
|
|
|
|
* Enhancements:
|
|
- #328: [libbladeRF] Review and evaluate use of stream lock WRT libusb
|
|
- #321: How about a switch for bladeRF-cli to emit calibration in a
|
|
format bladeRF-cli can later read?
|
|
- #319: [bladeRF-cli] Add libedit and libreadline support
|
|
- #282: [libbladeRF] Move get/set_lms_correction() and
|
|
get/set_fpga_correction() logic
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when possible
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini
|
|
Expansion Header
|
|
- #213: CLI should show sample file information for TX
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #200: Reserved addresses for firmware customization
|
|
- #174: Task: Migrate FX3 build to CMake-generated Makefile
|
|
- #105: Develop testing guidelines on new releases
|
|
|
|
--------------------------------------------------------------------------------
|
|
2014.09-rc2 (2014-07-24)
|
|
--------------------------------------------------------------------------------
|
|
|
|
Since 2014.09-rc1, there have been a number of bug fixes. We wanted to ensure
|
|
these fixes were provided at a relatively stable "snapshot" in the codebase,
|
|
prior to introducing a slightly large of set of internal changes required
|
|
to provide the timestamp support and thread-safety.
|
|
|
|
As such, these changes are have been marked `2014.09-rc2`, and the late-August
|
|
milestone has been been renamed to `2014.09-rc3`. The objectives for the
|
|
late-August and September and milestones remain.
|
|
|
|
This release candidate consists of the following versions:
|
|
* FPGA bitstream v0.0.6
|
|
* FX3 firmware v1.7.1
|
|
* libbladeRF v0.16.2
|
|
* bladeRF-cli v0.11.1
|
|
|
|
In addition to continued fixes and minor improvements, the remaining
|
|
major functionality, now scheduled for RC3 is:
|
|
* Metadata/timestamp support for the libbladeRF synchronous interface
|
|
* Experimental Cypress driver-based libbladeRF backend for Windows
|
|
|
|
The above items will add additional items to the libbladeRF API, but will not
|
|
introduce any reverse-incompatible changes.
|
|
|
|
The items scheduled for deprecation are largely the same since 2014.09-rc1
|
|
* bladeRF-flash has been removed as of 2014.09-rc2
|
|
* libbladeRF's BLADERF_FORMAT_SC16Q11 will be removed prior to 2014.09-rc3
|
|
|
|
Outstanding tasks and known issues, as of RC2, are listed below. Note that not
|
|
all of these are scheduled for resolution by 2014.09. Please see the milestone
|
|
and tracker information GitHub for more information.
|
|
|
|
* Pull requests:
|
|
- #277: [bladeRF-cli] Make 'print <parameter>' output more consistent
|
|
- #267: Adjust nios simulation component so it matches the synthesis
|
|
version
|
|
|
|
* Bugs:
|
|
- #290: [bladeRF-cli] TX help typo
|
|
- #285: [libbladeRF] Update CMake options in README.md
|
|
- #260: [hdl] RX I Samples value 0
|
|
- #224: Report error code for incompatible version sets
|
|
- #95: Linux kernel/FX3: Not enough bandwidth for altsetting
|
|
|
|
* Enhancements:
|
|
- #282: [libbladeRF] Move get/set_lms_correctiion() and
|
|
get/set_fpga_correction() logic
|
|
- #252: [bladeRF-cli] Migrate rx/tx command implementations to
|
|
libbladeRF's sync i/f
|
|
- #250: [libbladeRF] Implement Cypress API-based backend
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when possible
|
|
- #238: [libbladeRF] Integrate timestamp/metadata support
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini
|
|
Expansion Header
|
|
- #219: libbladeRF: bladerf_init_stream parameter order is inconsistent
|
|
- #213: CLI should show sample file information for TX
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #200: Reserved addresses for firmware customization
|
|
- #199: Remove magic numbers for GPIO addresses from
|
|
lms_spi_controller.c
|
|
- #190: [libbladeRF] Refactor bladerf_priv.c
|
|
- #174: Task: Migrate FX3 build to CMake-generated Makefile
|
|
- #166: debian: Auto-download appropriate firmware/FPGA images from
|
|
nuand.com during install
|
|
- #105: Develop testing guidelines on new releases
|
|
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
2014.09-rc1 (2014-07-05)
|
|
--------------------------------------------------------------------------------
|
|
|
|
This is the first of two release candidates for a 2014-09 release. RC1 consists
|
|
of the following component versions:
|
|
|
|
FPGA bitstream v0.0.5
|
|
FX3 Firmware v1.7.0
|
|
libbladeRF v0.16.0
|
|
bladeRF-cli v0.11.0
|
|
|
|
This release candidate provides a majority of the functionality scheduled for
|
|
the 2014.09 release. The remaining functionality, scheduled for RC2 is:
|
|
|
|
* Metadata/timestamp support for the libbladeRF synchronous interface
|
|
* Detection and reporting of incompatible firmware/FPGA versions
|
|
* Experimental Cypress driver-based libbladeRF backend for Windows
|
|
|
|
The above items will add additional items to the libbladeRF API, but will not
|
|
introduce any reverse-incompatible changes.
|
|
|
|
|
|
The following items are schedule for deprecation and removal prior to the
|
|
2014.09-rc2 release:
|
|
|
|
* bladeRF-flash utility
|
|
- A majority of the functionality provided in this program now overlaps
|
|
with bladeRF-cli. This program was used to ease the burden associated
|
|
with some very early firmware upgrades.
|
|
|
|
However, for firmware upgrade issues, the well-documented bootloader
|
|
approach is now preferred. This, combined with efforts to have
|
|
libbladeRF be more explicit about version mismatches, should eliminate
|
|
any remaining need for this program.
|
|
|
|
* libbladeRF's BLADERF_FORMAT SC16_Q12 reverse compatibility macro
|
|
- The format is now more appropriately named BLADERF_FORMAT_SC16_Q11.
|
|
Ensure you've replaced references to the old enumeration value.
|
|
|
|
|
|
Outstanding tasks and known issues, as of RC1, are listed below. Note that not
|
|
all of these are scheduled for resolution by 2014.09. Please see the milestone
|
|
and tracker information GitHub for more information.
|
|
|
|
* Pull requests:
|
|
- #270: Markdown-ify the bladeRF-cli interactive help
|
|
- #267: Adjust nios simulation component so it matches the synthesis
|
|
version
|
|
|
|
* Bugs:
|
|
- #265: [hdl] Incorect metadata position in the RX Stream
|
|
- #260: [hdl] RX I Samples value 0
|
|
- #255: Avoid obsolete samples in the RX stream
|
|
- #224: Report error code for incompatible version sets
|
|
- #95: Linux kernel/FX3: Not enough bandwidth for altsetting
|
|
|
|
* Enhancements:
|
|
- #252: [bladeRF-cli] Migrate rx/tx command implementations to
|
|
libbladeRF's sync i/f
|
|
- #250: [libbladeRF] Implement Cypress API-based backend
|
|
- #240: [libbladeRF] Prefer static assertion over assert() when possible
|
|
- #238: [libbladeRF] Integrate timestamp/metadata support
|
|
- #236: [libbladeRF] API calls for XB-100 required
|
|
- #221: Synchronized Tx/Rx of multiple bladeRFs for MIMO using Mini
|
|
Expansion Header
|
|
- #219: libbladeRF: bladerf_init_stream parameter order is inconsistent
|
|
- #213: CLI should show sample file information for TX
|
|
- #205: [FX3 Firmware] Code cleanup and potential improvements
|
|
- #200: Reserved addresses for firmware customization
|
|
- #199: Remove magic numbers for GPIO addresses from
|
|
lms_spi_controller.c
|
|
- #190: [libbladeRF] Refactor bladerf_priv.c
|
|
- #174: Task: Migrate FX3 build to CMake-generated Makefile
|
|
- #166: debian: Auto-download appropriate firmware/FPGA images from
|
|
nuand.com during install
|
|
- #105: Develop testing guidelines on new releases
|