/**************************************************************/ /* swim2Tests.cpp Date: 2018/08/9 */ /* */ /* Copyright (c) 2018-2019 GIS. All rights reserved. */ /* */ /**************************************************************/ #include #include "swim2Tests.h" // -------------------------------------------------- // SWIM entry tests // -------------------------------------------------- int swim2Tests::swim_entry_test (CSwim2Auto* pSwim, int node, int testGroup) { int error = 0; uint32_t status; VPrint("Starting SWIM entry tests\n"); // Set high speed mode pSwim->pControl->SetHighSpeed(1); // Put TB receiver in entry detection mode setEntryMode(true); // Send entry sequence, and reset to low speed pSwim->pControl->SetHighSpeed(0); pSwim->pControl->SetSendEntrySeq(1); // Wait until not busy while(pSwim->pStatus->GetTxbusy()) { usleepSim(1); } uint32_t swimRxh, swimRxl; // Fetch receiver values getRxData(swimRxh, swimRxl); // Check expected receiver signature for entry sequence if (swimRxh != SWIM_ENTRY_SIGNATURE_HI and swimRxl != SWIM_ENTRY_SIGNATURE_LO) { VPrint("**ERROR %03d : SWIM entry failure (0x%08x%08x).\n", testGroup + 0, swimRxh, swimRxl); error |= 1; } // Put TB receiver out of entry detection mode setEntryMode(false); // Send SWRST (low speed) pSwim->pControl->SetSendSrst(1); // Wait until not busy while(pSwim->pStatus->GetTxbusy()) { usleepSim(1); } // Fetch the receiver values and check for SWRST struct swimRx_t swimVal; getRxData(swimRxh, swimRxl); swimVal = decodeswimRx(swimRxl, swimRxh); if (swimVal.srst != SWIM_SWRST_CMD) { VPrint("**ERROR %03d : SWIM entry SWRST failure.\n", testGroup + 1); error |= 1; } return error; } // -------------------------------------------------- // SWIM TX/RX tests // -------------------------------------------------- int swim2Tests::swim_txrx_test (CSwim2Auto* pSwim, int node, int testGroup) { int error = 0; uint32_t status; VPrint("Starting SWIM TX/RX tests\n"); // Send WOTF (1 byte) : addr 0x123456, byte 0x55 uint32_t addr = 0x123456; uint32_t data = 0x55; pSwim->pTxByte->SetTxByte((addr << 8) | data); // Read back CSR_TX_BYTE_ADDR if ((status = pSwim->pTxByte->GetTxByte()) != ((addr << 8) | data)) { VPrint("**ERROR %03d : SWIM TX_BYTE register read failure on WOTF (got 0x%08x exp 0x%08x)\n", testGroup + 2, status, ((addr << 8) | data)); error |= 1; } // Wait while(pSwim->pStatus->GetTxbusy()) { usleepSim(10); } struct swimRx_t swimVal; uint32_t swimRxl; uint32_t swimRxh; getRxData(swimRxh, swimRxl); if (swimCheckValue(swimRxl, swimRxh, SWIM_WOTF_CMD, 1, addr, data, swimVal)) { VPrint("**ERROR %03d : SWIM WOTF received data failure (0x%08x%08x).\n", testGroup + 3, swimRxh, swimRxl); error |= 1; } // Send ROTF (1 byte) : addr 0x654321 addr = 0x654321; data = 0; // don't care pSwim->pRxByte->SetRxByte((addr << 8) | data); // Read back CSR_RX_BYTE_ADDR if (((status = pSwim->pRxByte->GetRxByte() ) >> 8) != addr) { VPrint("**ERROR %03d : SWIM RX_BYTE register read failure on ROTF (got 0x%08x exp 0x%08x)\n", testGroup + 4, status, ((addr << 8))); error |= 1; } // Wait while(pSwim->pStatus->GetRxbusy() || pSwim->pStatus->GetTxbusy()) { usleepSim(10); } uint32_t expData = 0xaa; getRxData(swimRxh, swimRxl); // Check the received data if (swimCheckValue(swimRxl, swimRxh, SWIM_ROTF_CMD, 1, addr, expData, swimVal)) { VPrint("**ERROR %03d : SWIM ROTF received data failure (0x%08x%08x).\n", testGroup + 5, swimRxh, swimRxl); error |= 1; } // Read RX byte if ((status = pSwim->pRxByte->GetByte()) != expData) { VPrint("**ERROR %03d : SWIM RX_BYTE read failure (got 0x%02x exp 0x%02x).\n", testGroup + 6, status, expData); error |= 1; } // Clear RX pSwim->pControl->SetClrRx(1); // Send a block write command addr = 0x250864; pSwim->pTxBlock->SetWaddr(addr); // Check TX busy is set if (!(status = pSwim->pStatus->GetTxbusy())) { VPrint("**ERROR %03d : SWIM TXBUSY status failure on block write.\n", testGroup + 7); error |= 1; } // Wait while(pSwim->pStatus->GetTxbusy()) { usleepSim(10); } // Check count is 128 if ((status = pSwim->pBlkRemaining->GetBlkRemaining()) != 128) { VPrint("**ERROR %03d : BLK_REMAINING count 128 check failure (got 0x%02x exp 0x%02x).\n", testGroup + 8, status, 128); error |= 1; } // Check TXBUSY is clear if ((status = pSwim->pStatus->GetTxbusy())) { VPrint("**ERROR %03d : SWIM TXBUSY not clear failure.\n", testGroup + 9); error |= 1; } // Send 1 byte data = 0x5a; pSwim->pPushByte->SetPushByte(data); // Wait while(pSwim->pStatus->GetTxbusy()) { usleepSim(10); } getRxData(swimRxh, swimRxl); // Check the received data if (swimCheckValue(swimRxl, swimRxh, SWIM_WOTF_CMD, 128, addr, data, swimVal)) { VPrint("**ERROR %03d : SWIM Block write command received data failure. (0x%08x%08x).\n", testGroup + 10, swimRxh, swimRxl); error |= 1; } // Check block count is 127 if ((status = pSwim->pBlkRemaining->GetBlkRemaining()) != 127) { VPrint("**ERROR %03d : BLK_REMAINING count 127 check failure (got 0x%02x exp 0x%02x).\n", testGroup + 11, status, 127); error |= 1; } bool foundError = false; // Send the rest of the block data for (int idx = 1; idx < 128; idx++) { // Send 1 byte pSwim->pPushByte->SetPushByte(data + idx); // Check block count is 127 - idx if ((status = pSwim->pBlkRemaining->GetBlkRemaining()) != (127 - idx) && !foundError) { VPrint("**ERROR %03d : SWIM BLK_REMAINING count check failure (got %d exp %d).\n", testGroup + 12, status, (127 - idx)); foundError = true; error |= 1; } // Wait while(pSwim->pStatus->GetTxbusy()) { usleepSim(1); } // Check receiver data getRxData(swimRxh, swimRxl); swimCheckValue(swimRxl, swimRxh, SWIM_WOTF_CMD, 128, addr, data + idx, swimVal); if (swimVal.data != (data + idx) && !foundError) { VPrint("**ERROR %03d : SWIM received data on block write failure from idx %s.\n", testGroup + 13, idx); foundError = true; error |= 1; } } return error; }