1) Added schematics folder
2) Added pei_fpga_top folder 3) working on RunTest cpp and h files 4) working on tb.vhd file
This commit is contained in:
parent
10459ebfc8
commit
b02641a0d6
351 changed files with 119679 additions and 67 deletions
BIN
firmware/pei_fpga_top/build/db/.cmp.kpt
Normal file
BIN
firmware/pei_fpga_top/build/db/.cmp.kpt
Normal file
Binary file not shown.
81
firmware/pei_fpga_top/build/db/a_dpfifo_2s31.tdf
Normal file
81
firmware/pei_fpga_top/build/db/a_dpfifo_2s31.tdf
Normal file
|
|
@ -0,0 +1,81 @@
|
|||
--a_dpfifo ADD_RAM_OUTPUT_REGISTER="OFF" ALLOW_RWCYCLE_WHEN_FULL="OFF" DEVICE_FAMILY="Cyclone 10 LP" LPM_NUMWORDS=512 LPM_SHOWAHEAD="OFF" lpm_width=8 lpm_widthu=9 OVERFLOW_CHECKING="ON" UNDERFLOW_CHECKING="ON" clock data empty full q rreq sclr usedw wreq CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48 CYCLONEII_M4K_COMPATIBILITY="ON" INTENDED_DEVICE_FAMILY="Cyclone 10 LP" LOW_POWER_MODE="AUTO"
|
||||
--VERSION_BEGIN 20.1 cbx_altdpram 2020:11:11:17:06:45:SJ cbx_altera_counter 2020:11:11:17:06:45:SJ cbx_altera_syncram 2020:11:11:17:06:45:SJ cbx_altera_syncram_nd_impl 2020:11:11:17:06:45:SJ cbx_altsyncram 2020:11:11:17:06:45:SJ cbx_cycloneii 2020:11:11:17:06:45:SJ cbx_fifo_common 2020:11:11:17:06:45:SJ cbx_lpm_add_sub 2020:11:11:17:06:45:SJ cbx_lpm_compare 2020:11:11:17:06:45:SJ cbx_lpm_counter 2020:11:11:17:06:45:SJ cbx_lpm_decode 2020:11:11:17:06:45:SJ cbx_lpm_mux 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_nadder 2020:11:11:17:06:46:SJ cbx_scfifo 2020:11:11:17:06:46:SJ cbx_stratix 2020:11:11:17:06:46:SJ cbx_stratixii 2020:11:11:17:06:46:SJ cbx_stratixiii 2020:11:11:17:06:46:SJ cbx_stratixv 2020:11:11:17:06:46:SJ cbx_util_mgl 2020:11:11:17:06:46:SJ VERSION_END
|
||||
|
||||
|
||||
-- Copyright (C) 2020 Intel Corporation. All rights reserved.
|
||||
-- Your use of Intel Corporation's design tools, logic functions
|
||||
-- and other software and tools, and any partner logic
|
||||
-- functions, and any output files from any of the foregoing
|
||||
-- (including device programming or simulation files), and any
|
||||
-- associated documentation or information are expressly subject
|
||||
-- to the terms and conditions of the Intel Program License
|
||||
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
-- the Intel FPGA IP License Agreement, or other applicable license
|
||||
-- agreement, including, without limitation, that your use is for
|
||||
-- the sole purpose of programming logic devices manufactured by
|
||||
-- Intel and sold by Intel or its authorized distributors. Please
|
||||
-- refer to the applicable agreement for further details, at
|
||||
-- https://fpgasoftware.intel.com/eula.
|
||||
|
||||
|
||||
FUNCTION a_fefifo_s7f (aclr, clock, rreq, sclr, wreq)
|
||||
RETURNS ( empty, full, usedw_out[8..0]);
|
||||
FUNCTION altsyncram_dkm1 (address_a[8..0], address_b[8..0], clock0, clock1, clocken1, data_a[7..0], wren_a)
|
||||
RETURNS ( q_b[7..0]);
|
||||
FUNCTION cntr_tnb (aclr, clock, cnt_en, sclr)
|
||||
RETURNS ( q[8..0]);
|
||||
|
||||
--synthesis_resources = lut 27 M9K 1 reg 29
|
||||
SUBDESIGN a_dpfifo_2s31
|
||||
(
|
||||
clock : input;
|
||||
data[7..0] : input;
|
||||
empty : output;
|
||||
full : output;
|
||||
q[7..0] : output;
|
||||
rreq : input;
|
||||
sclr : input;
|
||||
usedw[8..0] : output;
|
||||
wreq : input;
|
||||
)
|
||||
VARIABLE
|
||||
fifo_state : a_fefifo_s7f;
|
||||
FIFOram : altsyncram_dkm1;
|
||||
rd_ptr_count : cntr_tnb;
|
||||
wr_ptr : cntr_tnb;
|
||||
aclr : NODE;
|
||||
rd_ptr[8..0] : WIRE;
|
||||
valid_rreq : WIRE;
|
||||
valid_wreq : WIRE;
|
||||
|
||||
BEGIN
|
||||
fifo_state.aclr = aclr;
|
||||
fifo_state.clock = clock;
|
||||
fifo_state.rreq = rreq;
|
||||
fifo_state.sclr = sclr;
|
||||
fifo_state.wreq = wreq;
|
||||
FIFOram.address_a[] = wr_ptr.q[];
|
||||
FIFOram.address_b[] = ((! sclr) & rd_ptr[]);
|
||||
FIFOram.clock0 = clock;
|
||||
FIFOram.clock1 = clock;
|
||||
FIFOram.clocken1 = (valid_rreq # sclr);
|
||||
FIFOram.data_a[] = data[];
|
||||
FIFOram.wren_a = valid_wreq;
|
||||
rd_ptr_count.aclr = aclr;
|
||||
rd_ptr_count.clock = clock;
|
||||
rd_ptr_count.cnt_en = valid_rreq;
|
||||
rd_ptr_count.sclr = sclr;
|
||||
wr_ptr.aclr = aclr;
|
||||
wr_ptr.clock = clock;
|
||||
wr_ptr.cnt_en = valid_wreq;
|
||||
wr_ptr.sclr = sclr;
|
||||
aclr = GND;
|
||||
empty = fifo_state.empty;
|
||||
full = fifo_state.full;
|
||||
q[] = FIFOram.q_b[];
|
||||
rd_ptr[] = rd_ptr_count.q[];
|
||||
usedw[] = fifo_state.usedw_out[];
|
||||
valid_rreq = (rreq & (! fifo_state.empty));
|
||||
valid_wreq = (wreq & (! fifo_state.full));
|
||||
END;
|
||||
--VALID FILE
|
||||
103
firmware/pei_fpga_top/build/db/a_fefifo_s7f.tdf
Normal file
103
firmware/pei_fpga_top/build/db/a_fefifo_s7f.tdf
Normal file
|
|
@ -0,0 +1,103 @@
|
|||
--a_fefifo ALLOW_RWCYCLE_WHEN_FULL="OFF" LPM_NUMWORDS=512 lpm_widthad=9 OVERFLOW_CHECKING="ON" UNDERFLOW_CHECKING="ON" aclr clock empty full rreq sclr usedw_out wreq
|
||||
--VERSION_BEGIN 20.1 cbx_cycloneii 2020:11:11:17:06:45:SJ cbx_fifo_common 2020:11:11:17:06:45:SJ cbx_lpm_add_sub 2020:11:11:17:06:45:SJ cbx_lpm_compare 2020:11:11:17:06:45:SJ cbx_lpm_counter 2020:11:11:17:06:45:SJ cbx_lpm_decode 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_nadder 2020:11:11:17:06:46:SJ cbx_stratix 2020:11:11:17:06:46:SJ cbx_stratixii 2020:11:11:17:06:46:SJ VERSION_END
|
||||
|
||||
|
||||
-- Copyright (C) 2020 Intel Corporation. All rights reserved.
|
||||
-- Your use of Intel Corporation's design tools, logic functions
|
||||
-- and other software and tools, and any partner logic
|
||||
-- functions, and any output files from any of the foregoing
|
||||
-- (including device programming or simulation files), and any
|
||||
-- associated documentation or information are expressly subject
|
||||
-- to the terms and conditions of the Intel Program License
|
||||
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
-- the Intel FPGA IP License Agreement, or other applicable license
|
||||
-- agreement, including, without limitation, that your use is for
|
||||
-- the sole purpose of programming logic devices manufactured by
|
||||
-- Intel and sold by Intel or its authorized distributors. Please
|
||||
-- refer to the applicable agreement for further details, at
|
||||
-- https://fpgasoftware.intel.com/eula.
|
||||
|
||||
|
||||
FUNCTION cntr_9o7 (aclr, clock, cnt_en, sclr, updown)
|
||||
RETURNS ( q[8..0]);
|
||||
|
||||
--synthesis_resources = lut 9 reg 11
|
||||
SUBDESIGN a_fefifo_s7f
|
||||
(
|
||||
aclr : input;
|
||||
clock : input;
|
||||
empty : output;
|
||||
full : output;
|
||||
rreq : input;
|
||||
sclr : input;
|
||||
usedw_out[8..0] : output;
|
||||
wreq : input;
|
||||
)
|
||||
VARIABLE
|
||||
b_full : dffe;
|
||||
b_non_empty : dffe;
|
||||
count_usedw : cntr_9o7;
|
||||
equal_af1w[8..0] : WIRE;
|
||||
equal_one[8..0] : WIRE;
|
||||
is_almost_empty0 : WIRE;
|
||||
is_almost_empty1 : WIRE;
|
||||
is_almost_empty2 : WIRE;
|
||||
is_almost_empty3 : WIRE;
|
||||
is_almost_empty4 : WIRE;
|
||||
is_almost_empty5 : WIRE;
|
||||
is_almost_empty6 : WIRE;
|
||||
is_almost_empty7 : WIRE;
|
||||
is_almost_empty8 : WIRE;
|
||||
is_almost_full0 : WIRE;
|
||||
is_almost_full1 : WIRE;
|
||||
is_almost_full2 : WIRE;
|
||||
is_almost_full3 : WIRE;
|
||||
is_almost_full4 : WIRE;
|
||||
is_almost_full5 : WIRE;
|
||||
is_almost_full6 : WIRE;
|
||||
is_almost_full7 : WIRE;
|
||||
is_almost_full8 : WIRE;
|
||||
usedw[8..0] : WIRE;
|
||||
valid_rreq : WIRE;
|
||||
valid_wreq : WIRE;
|
||||
|
||||
BEGIN
|
||||
b_full.clk = clock;
|
||||
b_full.clrn = (! aclr);
|
||||
b_full.d = ((b_full.q & (b_full.q $ (sclr # rreq))) # (((! b_full.q) & b_non_empty.q) & ((! sclr) & ((is_almost_full8 & wreq) & (! rreq)))));
|
||||
b_non_empty.clk = clock;
|
||||
b_non_empty.clrn = (! aclr);
|
||||
b_non_empty.d = (((b_full.q & (b_full.q $ sclr)) # (((! b_non_empty.q) & wreq) & (! sclr))) # (((! b_full.q) & b_non_empty.q) & (((! b_full.q) & b_non_empty.q) $ (sclr # ((is_almost_empty8 & rreq) & (! wreq))))));
|
||||
count_usedw.aclr = aclr;
|
||||
count_usedw.clock = clock;
|
||||
count_usedw.cnt_en = (valid_wreq $ valid_rreq);
|
||||
count_usedw.sclr = sclr;
|
||||
count_usedw.updown = valid_wreq;
|
||||
empty = (! b_non_empty.q);
|
||||
equal_af1w[] = ( B"0", B"0", B"0", B"0", B"0", B"0", B"0", B"0", B"0");
|
||||
equal_one[] = ( B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"0");
|
||||
full = b_full.q;
|
||||
is_almost_empty0 = (usedw[0..0] $ equal_one[0..0]);
|
||||
is_almost_empty1 = ((usedw[1..1] $ equal_one[1..1]) & is_almost_empty0);
|
||||
is_almost_empty2 = ((usedw[2..2] $ equal_one[2..2]) & is_almost_empty1);
|
||||
is_almost_empty3 = ((usedw[3..3] $ equal_one[3..3]) & is_almost_empty2);
|
||||
is_almost_empty4 = ((usedw[4..4] $ equal_one[4..4]) & is_almost_empty3);
|
||||
is_almost_empty5 = ((usedw[5..5] $ equal_one[5..5]) & is_almost_empty4);
|
||||
is_almost_empty6 = ((usedw[6..6] $ equal_one[6..6]) & is_almost_empty5);
|
||||
is_almost_empty7 = ((usedw[7..7] $ equal_one[7..7]) & is_almost_empty6);
|
||||
is_almost_empty8 = ((usedw[8..8] $ equal_one[8..8]) & is_almost_empty7);
|
||||
is_almost_full0 = (usedw[0..0] $ equal_af1w[0..0]);
|
||||
is_almost_full1 = ((usedw[1..1] $ equal_af1w[1..1]) & is_almost_full0);
|
||||
is_almost_full2 = ((usedw[2..2] $ equal_af1w[2..2]) & is_almost_full1);
|
||||
is_almost_full3 = ((usedw[3..3] $ equal_af1w[3..3]) & is_almost_full2);
|
||||
is_almost_full4 = ((usedw[4..4] $ equal_af1w[4..4]) & is_almost_full3);
|
||||
is_almost_full5 = ((usedw[5..5] $ equal_af1w[5..5]) & is_almost_full4);
|
||||
is_almost_full6 = ((usedw[6..6] $ equal_af1w[6..6]) & is_almost_full5);
|
||||
is_almost_full7 = ((usedw[7..7] $ equal_af1w[7..7]) & is_almost_full6);
|
||||
is_almost_full8 = ((usedw[8..8] $ equal_af1w[8..8]) & is_almost_full7);
|
||||
usedw[] = count_usedw.q[];
|
||||
usedw_out[] = usedw[];
|
||||
valid_rreq = (rreq & b_non_empty.q);
|
||||
valid_wreq = (wreq & (! b_full.q));
|
||||
END;
|
||||
--VALID FILE
|
||||
304
firmware/pei_fpga_top/build/db/altsyncram_dkm1.tdf
Normal file
304
firmware/pei_fpga_top/build/db/altsyncram_dkm1.tdf
Normal file
|
|
@ -0,0 +1,304 @@
|
|||
--altsyncram ADDRESS_ACLR_A="NONE" ADDRESS_ACLR_B="NONE" ADDRESS_REG_B="CLOCK1" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone 10 LP" ENABLE_ECC="FALSE" INDATA_ACLR_A="NONE" LOW_POWER_MODE="AUTO" NUMWORDS_A=512 NUMWORDS_B=512 OPERATION_MODE="DUAL_PORT" OUTDATA_ACLR_B="NONE" OUTDATA_REG_B="UNREGISTERED" RDCONTROL_ACLR_B="NONE" RDCONTROL_REG_B="CLOCK0" READ_DURING_WRITE_MODE_MIXED_PORTS="DONT_CARE" WIDTH_A=8 WIDTH_B=8 WIDTH_ECCSTATUS=2 WIDTHAD_A=9 WIDTHAD_B=9 WRCONTROL_ACLR_A="NONE" address_a address_b clock0 clock1 clocken1 data_a q_b wren_a CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
|
||||
--VERSION_BEGIN 20.1 cbx_altera_syncram_nd_impl 2020:11:11:17:06:45:SJ cbx_altsyncram 2020:11:11:17:06:45:SJ cbx_cycloneii 2020:11:11:17:06:45:SJ cbx_lpm_add_sub 2020:11:11:17:06:45:SJ cbx_lpm_compare 2020:11:11:17:06:45:SJ cbx_lpm_decode 2020:11:11:17:06:45:SJ cbx_lpm_mux 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_nadder 2020:11:11:17:06:46:SJ cbx_stratix 2020:11:11:17:06:46:SJ cbx_stratixii 2020:11:11:17:06:46:SJ cbx_stratixiii 2020:11:11:17:06:46:SJ cbx_stratixv 2020:11:11:17:06:46:SJ cbx_util_mgl 2020:11:11:17:06:46:SJ VERSION_END
|
||||
|
||||
|
||||
-- Copyright (C) 2020 Intel Corporation. All rights reserved.
|
||||
-- Your use of Intel Corporation's design tools, logic functions
|
||||
-- and other software and tools, and any partner logic
|
||||
-- functions, and any output files from any of the foregoing
|
||||
-- (including device programming or simulation files), and any
|
||||
-- associated documentation or information are expressly subject
|
||||
-- to the terms and conditions of the Intel Program License
|
||||
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
-- the Intel FPGA IP License Agreement, or other applicable license
|
||||
-- agreement, including, without limitation, that your use is for
|
||||
-- the sole purpose of programming logic devices manufactured by
|
||||
-- Intel and sold by Intel or its authorized distributors. Please
|
||||
-- refer to the applicable agreement for further details, at
|
||||
-- https://fpgasoftware.intel.com/eula.
|
||||
|
||||
|
||||
FUNCTION cyclone10lp_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, ena2, ena3, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portare, portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbre, portbwe)
|
||||
WITH ( CLK0_CORE_CLOCK_ENABLE, CLK0_INPUT_CLOCK_ENABLE, CLK0_OUTPUT_CLOCK_ENABLE, CLK1_CORE_CLOCK_ENABLE, CLK1_INPUT_CLOCK_ENABLE, CLK1_OUTPUT_CLOCK_ENABLE, CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, INIT_FILE, INIT_FILE_LAYOUT, init_file_restructured, LOGICAL_RAM_NAME, mem_init0, mem_init1, mem_init2, mem_init3, mem_init4, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_READ_DURING_WRITE_MODE, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_DURING_WRITE_MODE, PORT_B_READ_ENABLE_CLOCK, PORT_B_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, SAFE_WRITE, WIDTH_ECCSTATUS)
|
||||
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
|
||||
|
||||
--synthesis_resources = M9K 1
|
||||
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
|
||||
|
||||
SUBDESIGN altsyncram_dkm1
|
||||
(
|
||||
address_a[8..0] : input;
|
||||
address_b[8..0] : input;
|
||||
clock0 : input;
|
||||
clock1 : input;
|
||||
clocken1 : input;
|
||||
data_a[7..0] : input;
|
||||
q_b[7..0] : output;
|
||||
wren_a : input;
|
||||
)
|
||||
VARIABLE
|
||||
ram_block1a0 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 0,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 0,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a1 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 1,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 1,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a2 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 2,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 2,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a3 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 3,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 3,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a4 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 4,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 4,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a5 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 5,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 5,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a6 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 6,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 6,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a7 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "ena0",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CLK1_CORE_CLOCK_ENABLE = "ena1",
|
||||
CLK1_INPUT_CLOCK_ENABLE = "ena1",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 9,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 7,
|
||||
PORT_A_LAST_ADDRESS = 511,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock1",
|
||||
PORT_B_ADDRESS_WIDTH = 9,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 7,
|
||||
PORT_B_LAST_ADDRESS = 511,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 512,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock1",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
address_a_wire[8..0] : WIRE;
|
||||
address_b_wire[8..0] : WIRE;
|
||||
|
||||
BEGIN
|
||||
ram_block1a[7..0].clk0 = clock0;
|
||||
ram_block1a[7..0].clk1 = clock1;
|
||||
ram_block1a[7..0].ena0 = wren_a;
|
||||
ram_block1a[7..0].ena1 = clocken1;
|
||||
ram_block1a[7..0].portaaddr[] = ( address_a_wire[8..0]);
|
||||
ram_block1a[0].portadatain[] = ( data_a[0..0]);
|
||||
ram_block1a[1].portadatain[] = ( data_a[1..1]);
|
||||
ram_block1a[2].portadatain[] = ( data_a[2..2]);
|
||||
ram_block1a[3].portadatain[] = ( data_a[3..3]);
|
||||
ram_block1a[4].portadatain[] = ( data_a[4..4]);
|
||||
ram_block1a[5].portadatain[] = ( data_a[5..5]);
|
||||
ram_block1a[6].portadatain[] = ( data_a[6..6]);
|
||||
ram_block1a[7].portadatain[] = ( data_a[7..7]);
|
||||
ram_block1a[7..0].portawe = wren_a;
|
||||
ram_block1a[7..0].portbaddr[] = ( address_b_wire[8..0]);
|
||||
ram_block1a[7..0].portbre = B"11111111";
|
||||
address_a_wire[] = address_a[];
|
||||
address_b_wire[] = address_b[];
|
||||
q_b[] = ( ram_block1a[7..0].portbdataout[0..0]);
|
||||
END;
|
||||
--VALID FILE
|
||||
212
firmware/pei_fpga_top/build/db/altsyncram_qq81.tdf
Normal file
212
firmware/pei_fpga_top/build/db/altsyncram_qq81.tdf
Normal file
|
|
@ -0,0 +1,212 @@
|
|||
--altsyncram ADDRESS_ACLR_A="NONE" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone 10 LP" INDATA_ACLR_A="NONE" INIT_FILE="db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif" LOW_POWER_MODE="AUTO" NUMWORDS_A=256 OPERATION_MODE="ROM" OUTDATA_ACLR_A="NONE" OUTDATA_REG_A="UNREGISTERED" WIDTH_A=8 WIDTHAD_A=8 WRCONTROL_ACLR_A="NONE" address_a clock0 q_a CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
|
||||
--VERSION_BEGIN 20.1 cbx_altera_syncram_nd_impl 2020:11:11:17:06:45:SJ cbx_altsyncram 2020:11:11:17:06:45:SJ cbx_cycloneii 2020:11:11:17:06:45:SJ cbx_lpm_add_sub 2020:11:11:17:06:45:SJ cbx_lpm_compare 2020:11:11:17:06:45:SJ cbx_lpm_decode 2020:11:11:17:06:45:SJ cbx_lpm_mux 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_nadder 2020:11:11:17:06:46:SJ cbx_stratix 2020:11:11:17:06:46:SJ cbx_stratixii 2020:11:11:17:06:46:SJ cbx_stratixiii 2020:11:11:17:06:46:SJ cbx_stratixv 2020:11:11:17:06:46:SJ cbx_util_mgl 2020:11:11:17:06:46:SJ VERSION_END
|
||||
|
||||
|
||||
-- Copyright (C) 2020 Intel Corporation. All rights reserved.
|
||||
-- Your use of Intel Corporation's design tools, logic functions
|
||||
-- and other software and tools, and any partner logic
|
||||
-- functions, and any output files from any of the foregoing
|
||||
-- (including device programming or simulation files), and any
|
||||
-- associated documentation or information are expressly subject
|
||||
-- to the terms and conditions of the Intel Program License
|
||||
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
-- the Intel FPGA IP License Agreement, or other applicable license
|
||||
-- agreement, including, without limitation, that your use is for
|
||||
-- the sole purpose of programming logic devices manufactured by
|
||||
-- Intel and sold by Intel or its authorized distributors. Please
|
||||
-- refer to the applicable agreement for further details, at
|
||||
-- https://fpgasoftware.intel.com/eula.
|
||||
|
||||
|
||||
FUNCTION cyclone10lp_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, ena2, ena3, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portare, portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbre, portbwe)
|
||||
WITH ( CLK0_CORE_CLOCK_ENABLE, CLK0_INPUT_CLOCK_ENABLE, CLK0_OUTPUT_CLOCK_ENABLE, CLK1_CORE_CLOCK_ENABLE, CLK1_INPUT_CLOCK_ENABLE, CLK1_OUTPUT_CLOCK_ENABLE, CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, INIT_FILE, INIT_FILE_LAYOUT, init_file_restructured, LOGICAL_RAM_NAME, mem_init0, mem_init1, mem_init2, mem_init3, mem_init4, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_READ_DURING_WRITE_MODE, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_DURING_WRITE_MODE, PORT_B_READ_ENABLE_CLOCK, PORT_B_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, SAFE_WRITE, WIDTH_ECCSTATUS)
|
||||
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
|
||||
|
||||
--synthesis_resources = M9K 1
|
||||
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
|
||||
|
||||
SUBDESIGN altsyncram_qq81
|
||||
(
|
||||
address_a[7..0] : input;
|
||||
clock0 : input;
|
||||
q_a[7..0] : output;
|
||||
)
|
||||
VARIABLE
|
||||
ram_block1a0 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 0,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a1 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 1,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a2 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 2,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a3 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 3,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a4 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 4,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a5 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 5,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a6 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 6,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a7 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_i2c_slv_simple_eprom_9cc0af5f.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_a",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
OPERATION_MODE = "rom",
|
||||
PORT_A_ADDRESS_CLEAR = "none",
|
||||
PORT_A_ADDRESS_WIDTH = 8,
|
||||
PORT_A_DATA_OUT_CLEAR = "none",
|
||||
PORT_A_DATA_OUT_CLOCK = "none",
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 7,
|
||||
PORT_A_LAST_ADDRESS = 255,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 256,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
address_a_wire[7..0] : WIRE;
|
||||
|
||||
BEGIN
|
||||
ram_block1a[7..0].clk0 = clock0;
|
||||
ram_block1a[7..0].portaaddr[] = ( address_a_wire[7..0]);
|
||||
ram_block1a[7..0].portare = B"11111111";
|
||||
address_a_wire[] = address_a[];
|
||||
q_a[] = ( ram_block1a[7..0].portadataout[0..0]);
|
||||
END;
|
||||
--VALID FILE
|
||||
578
firmware/pei_fpga_top/build/db/altsyncram_v6m1.tdf
Normal file
578
firmware/pei_fpga_top/build/db/altsyncram_v6m1.tdf
Normal file
|
|
@ -0,0 +1,578 @@
|
|||
--altsyncram ADDRESS_ACLR_A="NONE" ADDRESS_ACLR_B="NONE" ADDRESS_REG_B="CLOCK0" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone 10 LP" INDATA_ACLR_A="NONE" INIT_FILE="db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif" LOW_POWER_MODE="AUTO" NUMWORDS_A=30 NUMWORDS_B=30 OPERATION_MODE="DUAL_PORT" OUTDATA_ACLR_B="NONE" OUTDATA_REG_B="UNREGISTERED" READ_DURING_WRITE_MODE_MIXED_PORTS="OLD_DATA" WIDTH_A=17 WIDTH_B=17 WIDTHAD_A=5 WIDTHAD_B=5 WRCONTROL_ACLR_A="NONE" address_a address_b clock0 data_a q_b wren_a CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
|
||||
--VERSION_BEGIN 20.1 cbx_altera_syncram_nd_impl 2020:11:11:17:06:45:SJ cbx_altsyncram 2020:11:11:17:06:45:SJ cbx_cycloneii 2020:11:11:17:06:45:SJ cbx_lpm_add_sub 2020:11:11:17:06:45:SJ cbx_lpm_compare 2020:11:11:17:06:45:SJ cbx_lpm_decode 2020:11:11:17:06:45:SJ cbx_lpm_mux 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_nadder 2020:11:11:17:06:46:SJ cbx_stratix 2020:11:11:17:06:46:SJ cbx_stratixii 2020:11:11:17:06:46:SJ cbx_stratixiii 2020:11:11:17:06:46:SJ cbx_stratixv 2020:11:11:17:06:46:SJ cbx_util_mgl 2020:11:11:17:06:46:SJ VERSION_END
|
||||
|
||||
|
||||
-- Copyright (C) 2020 Intel Corporation. All rights reserved.
|
||||
-- Your use of Intel Corporation's design tools, logic functions
|
||||
-- and other software and tools, and any partner logic
|
||||
-- functions, and any output files from any of the foregoing
|
||||
-- (including device programming or simulation files), and any
|
||||
-- associated documentation or information are expressly subject
|
||||
-- to the terms and conditions of the Intel Program License
|
||||
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
-- the Intel FPGA IP License Agreement, or other applicable license
|
||||
-- agreement, including, without limitation, that your use is for
|
||||
-- the sole purpose of programming logic devices manufactured by
|
||||
-- Intel and sold by Intel or its authorized distributors. Please
|
||||
-- refer to the applicable agreement for further details, at
|
||||
-- https://fpgasoftware.intel.com/eula.
|
||||
|
||||
|
||||
FUNCTION cyclone10lp_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, ena2, ena3, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portare, portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbre, portbwe)
|
||||
WITH ( CLK0_CORE_CLOCK_ENABLE, CLK0_INPUT_CLOCK_ENABLE, CLK0_OUTPUT_CLOCK_ENABLE, CLK1_CORE_CLOCK_ENABLE, CLK1_INPUT_CLOCK_ENABLE, CLK1_OUTPUT_CLOCK_ENABLE, CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, INIT_FILE, INIT_FILE_LAYOUT, init_file_restructured, LOGICAL_RAM_NAME, mem_init0, mem_init1, mem_init2, mem_init3, mem_init4, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_READ_DURING_WRITE_MODE, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_DURING_WRITE_MODE, PORT_B_READ_ENABLE_CLOCK, PORT_B_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, SAFE_WRITE, WIDTH_ECCSTATUS)
|
||||
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
|
||||
|
||||
--synthesis_resources = M9K 1
|
||||
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
|
||||
|
||||
SUBDESIGN altsyncram_v6m1
|
||||
(
|
||||
address_a[4..0] : input;
|
||||
address_b[4..0] : input;
|
||||
clock0 : input;
|
||||
data_a[16..0] : input;
|
||||
q_b[16..0] : output;
|
||||
wren_a : input;
|
||||
)
|
||||
VARIABLE
|
||||
ram_block1a0 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 0,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 0,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a1 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 1,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 1,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a2 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 2,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 2,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a3 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 3,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 3,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a4 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 4,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 4,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a5 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 5,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 5,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a6 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 6,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 6,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a7 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 7,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 7,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a8 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 8,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 8,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a9 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 9,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 9,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a10 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 10,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 10,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a11 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 11,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 11,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a12 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 12,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 12,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a13 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 13,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 13,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a14 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 14,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 14,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a15 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 15,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 15,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
ram_block1a16 : cyclone10lp_ram_block
|
||||
WITH (
|
||||
CLK0_CORE_CLOCK_ENABLE = "none",
|
||||
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||||
CONNECTIVITY_CHECKING = "OFF",
|
||||
INIT_FILE = "db/pei_fpga_top.ram0_ring_buffer_4009356.hdl.mif",
|
||||
INIT_FILE_LAYOUT = "port_b",
|
||||
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||||
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
||||
OPERATION_MODE = "dual_port",
|
||||
PORT_A_ADDRESS_WIDTH = 5,
|
||||
PORT_A_DATA_WIDTH = 1,
|
||||
PORT_A_FIRST_ADDRESS = 0,
|
||||
PORT_A_FIRST_BIT_NUMBER = 16,
|
||||
PORT_A_LAST_ADDRESS = 29,
|
||||
PORT_A_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_A_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_ADDRESS_CLEAR = "none",
|
||||
PORT_B_ADDRESS_CLOCK = "clock0",
|
||||
PORT_B_ADDRESS_WIDTH = 5,
|
||||
PORT_B_DATA_OUT_CLEAR = "none",
|
||||
PORT_B_DATA_WIDTH = 1,
|
||||
PORT_B_FIRST_ADDRESS = 0,
|
||||
PORT_B_FIRST_BIT_NUMBER = 16,
|
||||
PORT_B_LAST_ADDRESS = 29,
|
||||
PORT_B_LOGICAL_RAM_DEPTH = 30,
|
||||
PORT_B_LOGICAL_RAM_WIDTH = 17,
|
||||
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
||||
RAM_BLOCK_TYPE = "AUTO"
|
||||
);
|
||||
address_a_wire[4..0] : WIRE;
|
||||
address_b_wire[4..0] : WIRE;
|
||||
|
||||
BEGIN
|
||||
ram_block1a[16..0].clk0 = clock0;
|
||||
ram_block1a[16..0].portaaddr[] = ( address_a_wire[4..0]);
|
||||
ram_block1a[0].portadatain[] = ( data_a[0..0]);
|
||||
ram_block1a[1].portadatain[] = ( data_a[1..1]);
|
||||
ram_block1a[2].portadatain[] = ( data_a[2..2]);
|
||||
ram_block1a[3].portadatain[] = ( data_a[3..3]);
|
||||
ram_block1a[4].portadatain[] = ( data_a[4..4]);
|
||||
ram_block1a[5].portadatain[] = ( data_a[5..5]);
|
||||
ram_block1a[6].portadatain[] = ( data_a[6..6]);
|
||||
ram_block1a[7].portadatain[] = ( data_a[7..7]);
|
||||
ram_block1a[8].portadatain[] = ( data_a[8..8]);
|
||||
ram_block1a[9].portadatain[] = ( data_a[9..9]);
|
||||
ram_block1a[10].portadatain[] = ( data_a[10..10]);
|
||||
ram_block1a[11].portadatain[] = ( data_a[11..11]);
|
||||
ram_block1a[12].portadatain[] = ( data_a[12..12]);
|
||||
ram_block1a[13].portadatain[] = ( data_a[13..13]);
|
||||
ram_block1a[14].portadatain[] = ( data_a[14..14]);
|
||||
ram_block1a[15].portadatain[] = ( data_a[15..15]);
|
||||
ram_block1a[16].portadatain[] = ( data_a[16..16]);
|
||||
ram_block1a[16..0].portawe = wren_a;
|
||||
ram_block1a[16..0].portbaddr[] = ( address_b_wire[4..0]);
|
||||
ram_block1a[16..0].portbre = B"11111111111111111";
|
||||
address_a_wire[] = address_a[];
|
||||
address_b_wire[] = address_b[];
|
||||
q_b[] = ( ram_block1a[16..0].portbdataout[0..0]);
|
||||
END;
|
||||
--VALID FILE
|
||||
114
firmware/pei_fpga_top/build/db/cntr_9o7.tdf
Normal file
114
firmware/pei_fpga_top/build/db/cntr_9o7.tdf
Normal file
|
|
@ -0,0 +1,114 @@
|
|||
--lpm_counter DEVICE_FAMILY="Cyclone 10 LP" lpm_width=9 aclr clock cnt_en q sclr updown
|
||||
--VERSION_BEGIN 20.1 cbx_cycloneii 2020:11:11:17:06:45:SJ cbx_lpm_add_sub 2020:11:11:17:06:45:SJ cbx_lpm_compare 2020:11:11:17:06:45:SJ cbx_lpm_counter 2020:11:11:17:06:45:SJ cbx_lpm_decode 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_nadder 2020:11:11:17:06:46:SJ cbx_stratix 2020:11:11:17:06:46:SJ cbx_stratixii 2020:11:11:17:06:46:SJ VERSION_END
|
||||
|
||||
|
||||
-- Copyright (C) 2020 Intel Corporation. All rights reserved.
|
||||
-- Your use of Intel Corporation's design tools, logic functions
|
||||
-- and other software and tools, and any partner logic
|
||||
-- functions, and any output files from any of the foregoing
|
||||
-- (including device programming or simulation files), and any
|
||||
-- associated documentation or information are expressly subject
|
||||
-- to the terms and conditions of the Intel Program License
|
||||
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
-- the Intel FPGA IP License Agreement, or other applicable license
|
||||
-- agreement, including, without limitation, that your use is for
|
||||
-- the sole purpose of programming logic devices manufactured by
|
||||
-- Intel and sold by Intel or its authorized distributors. Please
|
||||
-- refer to the applicable agreement for further details, at
|
||||
-- https://fpgasoftware.intel.com/eula.
|
||||
|
||||
|
||||
FUNCTION cyclone10lp_lcell_comb (cin, dataa, datab, datac, datad)
|
||||
WITH ( DONT_TOUCH, LUT_MASK, SUM_LUTC_INPUT)
|
||||
RETURNS ( combout, cout);
|
||||
|
||||
--synthesis_resources = lut 9 reg 9
|
||||
SUBDESIGN cntr_9o7
|
||||
(
|
||||
aclr : input;
|
||||
clock : input;
|
||||
cnt_en : input;
|
||||
q[8..0] : output;
|
||||
sclr : input;
|
||||
updown : input;
|
||||
)
|
||||
VARIABLE
|
||||
counter_comb_bita0 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita1 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita2 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita3 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita4 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita5 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita6 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita7 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita8 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_reg_bit[8..0] : dffeas;
|
||||
aclr_actual : WIRE;
|
||||
clk_en : NODE;
|
||||
data[8..0] : NODE;
|
||||
external_cin : WIRE;
|
||||
s_val[8..0] : WIRE;
|
||||
safe_q[8..0] : WIRE;
|
||||
sload : NODE;
|
||||
sset : NODE;
|
||||
updown_dir : WIRE;
|
||||
|
||||
BEGIN
|
||||
counter_comb_bita[8..0].cin = ( counter_comb_bita[7..0].cout, external_cin);
|
||||
counter_comb_bita[8..0].dataa = ( counter_reg_bit[8..0].q);
|
||||
counter_comb_bita[8..0].datab = ( updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir);
|
||||
counter_comb_bita[8..0].datad = ( B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1");
|
||||
counter_reg_bit[].asdata = ((! sclr) & ((sset & s_val[]) # ((! sset) & data[])));
|
||||
counter_reg_bit[].clk = clock;
|
||||
counter_reg_bit[].clrn = (! aclr_actual);
|
||||
counter_reg_bit[].d = ( counter_comb_bita[8..0].combout);
|
||||
counter_reg_bit[].ena = (clk_en & (((sclr # sset) # sload) # cnt_en));
|
||||
counter_reg_bit[].sload = ((sclr # sset) # sload);
|
||||
aclr_actual = aclr;
|
||||
clk_en = VCC;
|
||||
data[] = GND;
|
||||
external_cin = B"1";
|
||||
q[] = safe_q[];
|
||||
s_val[] = B"111111111";
|
||||
safe_q[] = counter_reg_bit[].q;
|
||||
sload = GND;
|
||||
sset = GND;
|
||||
updown_dir = updown;
|
||||
END;
|
||||
--VALID FILE
|
||||
113
firmware/pei_fpga_top/build/db/cntr_tnb.tdf
Normal file
113
firmware/pei_fpga_top/build/db/cntr_tnb.tdf
Normal file
|
|
@ -0,0 +1,113 @@
|
|||
--lpm_counter DEVICE_FAMILY="Cyclone 10 LP" lpm_direction="UP" lpm_port_updown="PORT_UNUSED" lpm_width=9 aclr clock cnt_en q sclr
|
||||
--VERSION_BEGIN 20.1 cbx_cycloneii 2020:11:11:17:06:45:SJ cbx_lpm_add_sub 2020:11:11:17:06:45:SJ cbx_lpm_compare 2020:11:11:17:06:45:SJ cbx_lpm_counter 2020:11:11:17:06:45:SJ cbx_lpm_decode 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_nadder 2020:11:11:17:06:46:SJ cbx_stratix 2020:11:11:17:06:46:SJ cbx_stratixii 2020:11:11:17:06:46:SJ VERSION_END
|
||||
|
||||
|
||||
-- Copyright (C) 2020 Intel Corporation. All rights reserved.
|
||||
-- Your use of Intel Corporation's design tools, logic functions
|
||||
-- and other software and tools, and any partner logic
|
||||
-- functions, and any output files from any of the foregoing
|
||||
-- (including device programming or simulation files), and any
|
||||
-- associated documentation or information are expressly subject
|
||||
-- to the terms and conditions of the Intel Program License
|
||||
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||||
-- the Intel FPGA IP License Agreement, or other applicable license
|
||||
-- agreement, including, without limitation, that your use is for
|
||||
-- the sole purpose of programming logic devices manufactured by
|
||||
-- Intel and sold by Intel or its authorized distributors. Please
|
||||
-- refer to the applicable agreement for further details, at
|
||||
-- https://fpgasoftware.intel.com/eula.
|
||||
|
||||
|
||||
FUNCTION cyclone10lp_lcell_comb (cin, dataa, datab, datac, datad)
|
||||
WITH ( DONT_TOUCH, LUT_MASK, SUM_LUTC_INPUT)
|
||||
RETURNS ( combout, cout);
|
||||
|
||||
--synthesis_resources = lut 9 reg 9
|
||||
SUBDESIGN cntr_tnb
|
||||
(
|
||||
aclr : input;
|
||||
clock : input;
|
||||
cnt_en : input;
|
||||
q[8..0] : output;
|
||||
sclr : input;
|
||||
)
|
||||
VARIABLE
|
||||
counter_comb_bita0 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita1 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita2 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita3 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita4 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita5 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita6 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita7 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_comb_bita8 : cyclone10lp_lcell_comb
|
||||
WITH (
|
||||
LUT_MASK = "5A90",
|
||||
SUM_LUTC_INPUT = "cin"
|
||||
);
|
||||
counter_reg_bit[8..0] : dffeas;
|
||||
aclr_actual : WIRE;
|
||||
clk_en : NODE;
|
||||
data[8..0] : NODE;
|
||||
external_cin : WIRE;
|
||||
s_val[8..0] : WIRE;
|
||||
safe_q[8..0] : WIRE;
|
||||
sload : NODE;
|
||||
sset : NODE;
|
||||
updown_dir : WIRE;
|
||||
|
||||
BEGIN
|
||||
counter_comb_bita[8..0].cin = ( counter_comb_bita[7..0].cout, external_cin);
|
||||
counter_comb_bita[8..0].dataa = ( counter_reg_bit[8..0].q);
|
||||
counter_comb_bita[8..0].datab = ( updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir, updown_dir);
|
||||
counter_comb_bita[8..0].datad = ( B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1");
|
||||
counter_reg_bit[].asdata = ((! sclr) & ((sset & s_val[]) # ((! sset) & data[])));
|
||||
counter_reg_bit[].clk = clock;
|
||||
counter_reg_bit[].clrn = (! aclr_actual);
|
||||
counter_reg_bit[].d = ( counter_comb_bita[8..0].combout);
|
||||
counter_reg_bit[].ena = (clk_en & (((sclr # sset) # sload) # cnt_en));
|
||||
counter_reg_bit[].sload = ((sclr # sset) # sload);
|
||||
aclr_actual = aclr;
|
||||
clk_en = VCC;
|
||||
data[] = GND;
|
||||
external_cin = B"1";
|
||||
q[] = safe_q[];
|
||||
s_val[] = B"111111111";
|
||||
safe_q[] = counter_reg_bit[].q;
|
||||
sload = GND;
|
||||
sset = GND;
|
||||
updown_dir = B"1";
|
||||
END;
|
||||
--VALID FILE
|
||||
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(0).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(0).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(0).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(0).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(1).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(1).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(1).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(1).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(10).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(10).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(10).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(10).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(11).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(11).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(11).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(11).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(12).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(12).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(12).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(12).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(13).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(13).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(13).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(13).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(14).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(14).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(14).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(14).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(15).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(15).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(15).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(15).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(16).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(16).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(16).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(16).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(17).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(17).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(17).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(17).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(18).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(18).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(18).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(18).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(19).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(19).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(19).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(19).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(2).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(2).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(2).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(2).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(20).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(20).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(20).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(20).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(21).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(21).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(21).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(21).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(22).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(22).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(22).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(22).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(23).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(23).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(23).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(23).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(24).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(24).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(24).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(24).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(25).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(25).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(25).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(25).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(26).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(26).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(26).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(26).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(27).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(27).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(27).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(27).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(28).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(28).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(28).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(28).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(29).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(29).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(29).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(29).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(3).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(3).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(3).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(3).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(30).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(30).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(30).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(30).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(31).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(31).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(31).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(31).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(32).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(32).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(32).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(32).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(33).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(33).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(33).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(33).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(34).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(34).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(34).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(34).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(35).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(35).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(35).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(35).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(36).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(36).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(36).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(36).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(37).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(37).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(37).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(37).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(38).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(38).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(38).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(38).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(39).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(39).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(39).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(39).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(4).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(4).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(4).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(4).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(40).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(40).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(40).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(40).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(41).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(41).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(41).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(41).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(42).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(42).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(42).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(42).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(43).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(43).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(43).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(43).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(44).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(44).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(44).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(44).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(45).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(45).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(45).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(45).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(46).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(46).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(46).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(46).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(47).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(47).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(47).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(47).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(48).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(48).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(48).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(48).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(49).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(49).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(49).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(49).cnf.hdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(5).cnf.cdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(5).cnf.cdb
Normal file
Binary file not shown.
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(5).cnf.hdb
Normal file
BIN
firmware/pei_fpga_top/build/db/pei_fpga_top.(5).cnf.hdb
Normal file
Binary file not shown.
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue