1) Implemation of latch_count and signature. There was a problem with head_data_proc.vhd because it did not have acrl

2) tb has been modified to test the data. Printdata s coming from core
3) VUserMain0.cpp modified
This commit is contained in:
David Rodriguez 2024-08-30 18:14:15 +01:00
commit bfe6acaaac
7 changed files with 78 additions and 115 deletions

View file

@ -2,7 +2,7 @@
<cof>
<eprom_name>MT25QU128</eprom_name>
<flash_loader_device>10CL010Y</flash_loader_device>
<output_filename>output_files/pei_d3000_new.jic</output_filename>
<output_filename>output_files/pei_sg1024_new.jic</output_filename>
<n_pages>1</n_pages>
<width>1</width>
<mode>7</mode>
@ -10,7 +10,7 @@
<user_name>Page_0</user_name>
<page_flags>1</page_flags>
<bit0>
<sof_filename>D:/GitNew/hmb-se-d3000/firmware/pei_fpga_top/build/output_files/pei_fpga_top.sof</sof_filename>
<sof_filename>D:/git/hmb-fd-sg1024/firmware/pei_fpga_top/build/output_files/pei_fpga_top.sof</sof_filename>
</bit0>
</sof_data>
<version>10</version>

View file

@ -41,10 +41,11 @@ port (
clk_sys : in std_logic;
rst_n : in std_logic;
cmd_reset : in std_logic;
latch_pulse : in std_logic; -- indicates signature is valid and a latch has occurred
--decoded outputs
signature : out std_logic_vector (31 downto 0);
latch_pulse : out std_logic -- indicates signature is valid and a latch has occurred
signature : out std_logic_vector (31 downto 0)
);
end entity head_data_proc;
@ -55,6 +56,7 @@ architecture struct of head_data_proc is
port
(
datain : in std_logic_vector (7 DOWNTO 0);
aclr : in std_logic;
inclock : in std_logic ;
dataout_h : out std_logic_vector (7 DOWNTO 0);
dataout_l : out std_logic_vector (7 DOWNTO 0)
@ -68,7 +70,7 @@ architecture struct of head_data_proc is
signal rx_data_h_in : std_logic_vector (7 downto 0);
signal rx_data_l_in : std_logic_vector (7 downto 0);
signal pulse_int : std_logic_vector (2 downto 0);
signal latch_pulse_int : std_logic_vector (3 downto 0);
signal latch_pulse_int : std_logic_vector (2 downto 0);
signal reset_sig : std_logic;
signal rx_data_h_int : array_t;
signal rx_data_l_int : array_t;
@ -89,6 +91,7 @@ begin
head_datain_inst : head_datain port map
(
datain => rx_data,
aclr => not rst_n,
inclock => rx_clk,
dataout_h => rx_data_h_in,
dataout_l => rx_data_l_in

View file

@ -278,7 +278,6 @@ architecture struct of pei_fpga_top is
signal latch_pulse_rx_clk_d1 : std_logic;
signal latch_pulse_rx_clk_d2 : std_logic;
signal sig_rx_clk : std_logic_vector(31 downto 0);
signal sig_rx_clk_d1 : std_logic_vector(31 downto 0);
signal latch_pulse : std_logic;
signal latch_count : std_logic_vector(31 downto 0);
signal signature : std_logic_vector(31 downto 0);
@ -344,35 +343,11 @@ begin
pei_clkout <= pei_clkin;
--wf_sel <= "000";
------------------------------------------------------------------------------
-- Combinatorial logic
------------------------------------------------------------------------------
--test_hdr <= "00" & rst_n & lvds_locked & data_lvds_rx_d1;
--xhot_int_n <= lvdsoe and a0 and a1 and id0 and id1;
------------------------------------------------------------------------------
-- LEDs
------------------------------------------------------------------------------
--nled_g <= '0'; drivern from uart_services
nled_y <= 'Z';
nled_r <= 'Z';
------------------------------------------------------------------------------
-- Generate a reset signal
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- Extract and synch timing information
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- Instantiate PLL for main clock
------------------------------------------------------------------------------
GEN_PLL : if TEST_MODE = false generate
@ -414,38 +389,30 @@ port map (
cmd_reset => cmd_reset,
--decoded outputs
signature => sig_rx_clk,
latch_pulse => latch_pulse_rx_clk
latch_pulse => head_lat(0)
);
signature <= sig_rx_clk;
--Debugging. Added by DRM 25/08
--debug_out(4)<= latch_pulse_rx_clk;
debug_out <= (1=>'1', 2=>'1', 3=>'1', 5=>'1', 4=> '1');
debug_out <= (1=>head_lat(0), 2=>'1', 3=>'1', 5=>'1', 4=> '1');
--sync_pulse_sv_inst: entity work.sync_pulse
--port map (clk_in => lvds_rx_clk, rst_n => rst_n, pulse_in => latch_pulse_rx_clk, clk_out => clk100, pulse_out => latch_pulse);
process (clk100,rst_n)
latch_int: process (clk100,rst_n,cmd_reset)
begin
if rst_n = '0' then
signature <= (others => '0');
latch_count <= (others => '0');
elsif clk100'event and clk100 = '1' then
if (clk100'event and clk100 = '1') then
--clock domain cross-over
latch_pulse_rx_clk_d1 <= latch_pulse_rx_clk;
latch_pulse_rx_clk_d1 <= head_lat(0);
latch_pulse_rx_clk_d2 <= latch_pulse_rx_clk_d1;
sig_rx_clk_d1 <= sig_rx_clk;
if (latch_pulse_rx_clk_d2 = '0' and latch_pulse_rx_clk_d1 = '1') then
-- safe clock change
signature <= sig_rx_clk_d1;
latch_count <= std_logic_vector(unsigned(latch_count)+1);
end if;
if cmd_reset = '1' then
signature <= (others => '0');
latch_count <= (others => '0');
latch_count <= std_logic_vector(unsigned(latch_count)+1);
end if;
end if;
if (cmd_reset = '1' or rst_n='0') then
latch_count <= (others => '0');
end if;
end process;
--Ring buffer
@ -714,17 +681,17 @@ uart_inst: entity work.pei_debug_uart_0
when ADDR_REG_LMP275 => rd_data_uart(conf_tmp275'range) <= conf_tmp275;
when ADDR_THIGH_LMP275 => rd_data_uart(Thigh_tmp275'range) <= Thigh_tmp275;
when ADDR_TLOW_LMP275 => rd_data_uart(Tlow_tmp275'range) <= Tlow_tmp275;
when ADDR_STM8_W_NBYTES => rd_data_uart(wr_nbytes'range) <= wr_nbytes;
when ADDR_STM8_W_NBYTES => rd_data_uart(wr_nbytes'range) <= wr_nbytes;
-- the registers below are related to D3000
when ADDR_SP_COMA => rd_data_uart(sp_table_comA'range) <= sp_table_comA;
when ADDR_SP_COMB => rd_data_uart(sp_table_comB'range) <= sp_table_comB;
when ADDR_SP_COMC => rd_data_uart(sp_table_comC'range) <= sp_table_comC;
when ADDR_MCP4631 => rd_uart <= '1';
when ADDR_EPROM_ADDR => rd_data_uart(eprom_addr'range) <= eprom_addr;
when ADDR_MCP4631 => rd_uart <= '1';
when ADDR_EPROM_ADDR => rd_data_uart(eprom_addr'range) <= eprom_addr;
when ADDR_EPROM_RD_DATA => rd_data_uart(eprom_wr_data'range) <= eprom_wr_data;
when I2C_ADDR_STM8 => rd_data_uart(15 downto 0) <= x"00" & i2c_address;
when I2C_ADDR_STM8 => rd_data_uart(15 downto 0) <= x"00" & i2c_address;
when others => NULL;
end case;
@ -746,10 +713,10 @@ uart_inst: entity work.pei_debug_uart_0
rd_data_uart(reg_mcp4631_in'range) <= x"ABCD"; --The I2C transaction failed
rx_i2c_flag <= '0';
elsif (add_uart_i=ADDR_MCP4631 and rx_i2c_flag ='0' ) then -- wait for start_r_mcp4631 to change to 1
rd_dv_uart <= '0';
rd_dv_uart <= '0';
else
rd_dv_uart <= '1';
rx_i2c_flag <= '0';
rd_dv_uart <= '1';
rx_i2c_flag <= '0';
end if;
-- rd_dv_uart <= '1'; -- always return something to stop hang up

View file

@ -34,6 +34,7 @@ tb_pkg.vhd
../../../generic_ip/pei_shared/1/src/pei_debug_uart_1.vhd
../../../pei_fpga_top/src/pkg_functions_pei.vhd
../../../pei_fpga_top/build/head_datain.vhd
../../../pei_fpga_top/build/ddio_in.vhd
../../../pei_fpga_top/build/ddio_out.vhd
../../../pei_fpga_top/build/io_buf_i2c.vhd

View file

@ -218,13 +218,15 @@ extern "C" void VUserMain0()
// #######################################
// # Call test code here
// #######################################
pTests = new runTest(runTest::peiUart);
//pTests = new runTest(runTest::peiUart);
// Run the test code
switch(testnum)
{
case MAINTESTNUM :
{
//pTests = new runTest(runTest::all);
//pTests = new runTest(runTest::peiUart);
pTests = new runTest(runTest::printStreamer);
//pTests = new runTest(runTest::dataCore);
//pTests = new runTest(runTest::dataCore2Bpp);
//pTests = new runTest(runTest::shutdownMon); // Test 5 and 6 fail. Same in 0.9.6

View file

@ -275,23 +275,27 @@ architecture sim of tb is
-- PEI Signals --
------------------------
signal rx_pc, tx_pc, nled_g, clk_pei_out, head_clk : std_logic;
signal uart_pei_pulse , uart_pei_ready : std_logic;
signal wf_sel : std_logic_vector (2 downto 0);
signal pei_dac_out : std_logic_vector(39 downto 0);
signal head_out : std_logic_vector (3 downto 0);
signal uart_pei_data_in : std_logic_vector(7 downto 0);
signal uart_pei_data_out : std_logic_vector(7 downto 0);
signal rx_pc, tx_pc, nled_g, clk_pei_out, head_clk : std_logic;
signal uart_pei_pulse , uart_pei_ready : std_logic;
signal wf_sel : std_logic_vector (2 downto 0);
signal clk_ddr_ph : std_logic_vector (1 downto 0);
signal pei_dac_out : std_logic_vector(39 downto 0);
signal head_out : std_logic_vector (3 downto 0);
signal uart_pei_data_in : std_logic_vector(7 downto 0);
signal uart_pei_data_out : std_logic_vector(7 downto 0);
signal sda_mcp4631, scl_mcp4631 : std_logic;
signal i2c_short : std_logic;
signal i2c_data : std_logic_vector(7 downto 0);
signal head_data : std_logic_vector(7 downto 0);
signal c_clk : std_logic_vector(1 downto 0);
signal head_lat : std_logic_vector(1 downto 0);
--UART
signal uart_data_rxed : std_logic;
signal uart_data_rxed_ack : std_logic;
signal hmb_dout : std_logic_vector(87 downto 0);
signal uart_data_rxed : std_logic;
signal uart_data_rxed_ack : std_logic;
signal hmb_dout : std_logic_vector(87 downto 0);
begin
@ -1130,8 +1134,25 @@ begin
-- The ARLEN is the burst count - 1
avm_rx_burstcount <= "0000" & std_logic_vector(unsigned(axm_arlen(7 downto 0)) + 1);
-- PEI
head_data <= ( 0 => print_data(0), 1 => print_data(1), 2 => print_data(2), 3 => print_data(3), 4 => print_data(4), 5 => print_data(5), 6 => print_data(6), 7 => print_data(7));
head_lat <= print_latch(1) & print_latch(0);
--print clk changes with the clock. I am doing this to mimic a DDR clock. The streamer test needs to be setup
ddr_clk_p : process(print_clk(1))
begin
if rst_n='0' then
clk_ddr_ph <= "00";
end if;
if rising_edge(print_clk(1)) then
clk_ddr_ph <= not clk_ddr_ph;
end if;
end process;
pei_int: entity work.pei_fpga_top
generic map (
generic map (
DEVICE_FAMILY => "Cyclone 10 LP",
ADDRESS_WIDTH =>8,
DATA_WIDTH =>32,
@ -1150,9 +1171,9 @@ port map (
dbg_ser_out => rx_pc, -- uart receiver pc
dbg_ser_in => tx_pc, -- uart transmit pc
head_data => (others => '0'),
c_clk => (others => '0'),
head_lat => (others => '0'),
head_data => head_data,
c_clk => clk_ddr_ph,
head_lat => head_lat,
two_col => '0',
nled_g => open,
@ -1192,7 +1213,7 @@ port map (
port map (
clk => clk,
rst_n => rst_n,
sda_in => sda_pei,
sda_in => sda_pei,
scl_in => scl_pei,
sda_out => sda_mcp4631,
scl_out => scl_mcp4631

View file

@ -2,52 +2,21 @@ onerror {resume}
quietly virtual signal -install /tb/core_inst { /tb/core_inst/dac_data_0(13 downto 0)} dac
quietly WaveActivateNextPane {} 0
add wave -noupdate /tb/pei_int/mcp4631_inst/clk
add wave -noupdate /tb/pei_int/mcp4631_inst/scl_in
add wave -noupdate /tb/pei_int/mcp4631_inst/scl_out
add wave -noupdate /tb/pei_int/mcp4631_inst/sda_in
add wave -noupdate /tb/pei_int/mcp4631_inst/sda_out
add wave -noupdate -radix hexadecimal /tb/pei_int/mcp4631_inst/reg_mcp4631_in
add wave -noupdate -radix hexadecimal /tb/pei_int/mcp4631_inst/reg_mcp4631_int
add wave -noupdate /tb/pei_int/mcp4631_inst/tx_dv
add wave -noupdate -radix hexadecimal /tb/pei_int/mcp4631_inst/wr_data_in
add wave -noupdate /tb/pei_int/mcp4631_inst/reg_mcp4631_out
add wave -noupdate /tb/pei_int/mcp4631_inst/i2c_mcp4631_busy
add wave -noupdate /tb/pei_int/mcp4631_inst/I2c_master_sate
add wave -noupdate /tb/mcp4631_tb_inst/sda_in
add wave -noupdate -radix hexadecimal /tb/mcp4631_tb_inst/mcp4631_add
add wave -noupdate /tb/mcp4631_tb_inst/i2c_busy
add wave -noupdate -radix hexadecimal /tb/mcp4631_tb_inst/mcp4631_mem
add wave -noupdate /tb/pei_int/conf_tmp275
add wave -noupdate -radix hexadecimal /tb/pei_int/reg_mcp4631_in
add wave -noupdate /tb/pei_int/reg_mcp4631_out
add wave -noupdate /tb/mcp4631_tb_inst/wr_mcp4631
add wave -noupdate -radix hexadecimal /tb/pei_int/data_frame_i2c
add wave -noupdate /tb/pei_int/mcp4631_inst/tx_dv
add wave -noupdate -radix hexadecimal /tb/pei_int/mcp4631_inst/reg_mcp4631_int
add wave -noupdate /tb/mcp4631_tb_inst/wr_en
add wave -noupdate -radix hexadecimal /tb/mcp4631_tb_inst/mcp4631_add
add wave -noupdate -radix binary /tb/mcp4631_tb_inst/mcp4631_cmd
add wave -noupdate -radix hexadecimal /tb/mcp4631_tb_inst/mcp4631_data
add wave -noupdate /tb/mcp4631_tb_inst/wr_mcp4631
add wave -noupdate -radix hexadecimal -childformat {{/tb/pei_int/write_fifo_inst/ram(0) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(1) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(2) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(3) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(4) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(5) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(6) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(7) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(8) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(9) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(10) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(11) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(12) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(13) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(14) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(15) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(16) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(17) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(18) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(19) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(20) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(21) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(22) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(23) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(24) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(25) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(26) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(27) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(28) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(29) -radix hexadecimal}} -subitemconfig {/tb/pei_int/write_fifo_inst/ram(0) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(1) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(2) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(3) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(4) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(5) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(6) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(7) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(8) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(9) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(10) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(11) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(12) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(13) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(14) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(15) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(16) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(17) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(18) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(19) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(20) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(21) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(22) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(23) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(24) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(25) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(26) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(27) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(28) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(29) {-height 15 -radix hexadecimal}} /tb/pei_int/write_fifo_inst/ram
add wave -noupdate -radix ascii /tb/pei_int/uart_inst/s_rx_data_out
add wave -noupdate -radix ascii /tb/pei_int/uart_inst/s_tx_data_in
add wave -noupdate /tb/pei_int/wr_uart
add wave -noupdate /tb/pei_int/wr_en_uart
add wave -noupdate -radix hexadecimal -childformat {{/tb/pei_int/write_fifo_inst/ram(0) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(1) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(2) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(3) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(4) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(5) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(6) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(7) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(8) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(9) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(10) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(11) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(12) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(13) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(14) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(15) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(16) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(17) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(18) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(19) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(20) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(21) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(22) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(23) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(24) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(25) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(26) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(27) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(28) -radix hexadecimal} {/tb/pei_int/write_fifo_inst/ram(29) -radix hexadecimal}} -subitemconfig {/tb/pei_int/write_fifo_inst/ram(0) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(1) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(2) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(3) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(4) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(5) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(6) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(7) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(8) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(9) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(10) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(11) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(12) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(13) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(14) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(15) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(16) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(17) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(18) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(19) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(20) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(21) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(22) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(23) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(24) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(25) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(26) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(27) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(28) {-height 15 -radix hexadecimal} /tb/pei_int/write_fifo_inst/ram(29) {-height 15 -radix hexadecimal}} /tb/pei_int/write_fifo_inst/ram
add wave -noupdate -radix hexadecimal /tb/pei_int/wr_nbytes
add wave -noupdate -radix hexadecimal /tb/pei_int/add_uart_i
add wave -noupdate /tb/pei_int/rd_uart
add wave -noupdate /tb/pei_uart_int/rx_data
add wave -noupdate /tb/pei_uart_int/tx_data
add wave -noupdate /tb/pei_int/i2c_mcp4631_busy
add wave -noupdate /tb/mcp4631_tb_inst/wr_data
add wave -noupdate /tb/pei_int/i2c_address
add wave -noupdate /tb/pei_int/head_data
add wave -noupdate /tb/pei_int/head_lat
add wave -noupdate /tb/pei_int/c_clk
add wave -noupdate /tb/pei_int/head_proc_inst/rx_clk
add wave -noupdate /tb/pei_int/head_proc_inst/rx_data
add wave -noupdate /tb/pei_int/head_proc_inst/rx_data_h_in
add wave -noupdate /tb/pei_int/head_proc_inst/rx_data_l_in
add wave -noupdate -expand /tb/pei_int/head_proc_inst/latch_pulse_int
add wave -noupdate /tb/pei_int/head_proc_inst/latch_pulse_sys_d1
add wave -noupdate /tb/pei_int/head_proc_inst/latch_pulse_sys_d2
TreeUpdate [SetDefaultTree]
WaveRestoreCursors {{Cursor 1} {782412809 ps} 0} {{Cursor 2} {391035495 ps} 0}
WaveRestoreCursors {{Cursor 1} {782412809 ps} 0} {{Cursor 2} {37480000 ps} 0}
quietly wave cursor active 2
configure wave -namecolwidth 173
configure wave -valuecolwidth 81
configure wave -valuecolwidth 246
configure wave -justifyvalue left
configure wave -signalnamewidth 1
configure wave -snapdistance 10
@ -60,4 +29,4 @@ configure wave -griddelta 40
configure wave -timeline 0
configure wave -timelineunits ns
update
WaveRestoreZoom {0 ps} {763199056 ps}
WaveRestoreZoom {35837499 ps} {39822933 ps}