Feed adsb.fi using an existing receiver running readsb / dump1090 / piaware / Raspbian / Linux
Find a file
2023-01-27 13:54:00 +01:00
scripts First draft for adsb.fi 2023-01-27 13:37:16 +01:00
configure.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
create-uuid.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
install-or-update-interface.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
install.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
LICENSE.md Finished new mlat-client setup. 2016-08-29 12:25:12 -04:00
README.md First draft for adsb.fi 2023-01-27 13:37:16 +01:00
setup.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
uninstall.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
update.sh Fix folder removal 2023-01-27 13:54:00 +01:00

ADS-B.FI feed client

  • These scripts aid in setting up your current ADS-B receiver to feed ADS-B.FI.
  • They will not disrupt any existing feed clients already present

1: Find coordinates / elevation:

https://www.freemaptools.com/elevation-finder.htm

2: Install the adsbfi feed client

curl -L -o /tmp/axfeed.sh https://raw.githubusercontent.com/d4rken/adsb-fi-scripts/master/install.sh
sudo bash /tmp/axfeed.sh

3: Check these two URLs to check if your feed is working

Update the feed client without reconfiguring

curl -L -o /tmp/axupdate.sh https://raw.githubusercontent.com/d4rken/adsb-fi-scripts/master/install-or-update-interface.sh
sudo bash /tmp/axupdate.sh

If you encounter issues, please do a reboot and then supply these logs on the forum (last 20 lines for each is sufficient):

sudo journalctl -u adsbfi-feed --no-pager
sudo journalctl -u adsbfi-mlat --no-pager

Display the configuration

cat /etc/default/adsbfi

Changing the configuration

This is the same as the initial installation. If the client is up to date it should not take as long as the original installation, otherwise this will also update the client which will take a moment.

curl -L -o /tmp/axfeed.sh https://raw.githubusercontent.com/d4rken/adsb-fi-scripts/master/install.sh
sudo bash /tmp/axfeed.sh

Disable / Enable adsb.fi MLAT-results in your main decoder interface (readsb / dump1090-fa)

  • Disable:
sudo sed --follow-symlinks -i -e 's/RESULTS=.*/RESULTS=""/' /etc/default/adsbfi
sudo systemctl restart adsbfi-mlat
  • Enable:
sudo sed --follow-symlinks -i -e 's/RESULTS=.*/RESULTS="--results beast,connect,127.0.0.1:30104"/' /etc/default/adsbfi
sudo systemctl restart adsbfi-mlat

Restart

sudo systemctl restart adsbfi-feed
sudo systemctl restart adsbfi-mlat

Systemd Status

sudo systemctl status adsbfi-mlat
sudo systemctl status adsbfi-feed

Removal / disabling the services:

sudo bash /usr/local/share/adsbfi/uninstall.sh

If the above doesn't work, you may be using an old version that didn't have the uninstall script, just disable the services and the scripts won't run anymore:

sudo systemctl disable --now adsbfi-feed
sudo systemctl disable --now adsbfi-mlat