adsb-fi-scripts/update.sh
2022-08-03 22:57:19 +02:00

417 lines
15 KiB
Bash
Executable file

#!/bin/bash
#####################################################################################
# ADS-B EXCHANGE SETUP SCRIPT #
#####################################################################################
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# #
# Copyright (c) 2020 ADSBx #
# #
# Permission is hereby granted, free of charge, to any person obtaining a copy #
# of this software and associated documentation files (the "Software"), to deal #
# in the Software without restriction, including without limitation the rights #
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell #
# copies of the Software, and to permit persons to whom the Software is #
# furnished to do so, subject to the following conditions: #
# #
# The above copyright notice and this permission notice shall be included in all #
# copies or substantial portions of the Software. #
# #
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR #
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, #
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE #
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER #
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, #
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE #
# SOFTWARE. #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
set -e
trap 'echo "------------"; echo "[ERROR] Error in line $LINENO when executing: $BASH_COMMAND"' ERR
renice 10 $$ &>/dev/null
if [[ $1 == reinstall ]]; then
REINSTALL=yes
fi
if [ "$(id -u)" != "0" ]; then
echo -e "\033[33m"
echo "This script must be ran using sudo or as root."
echo -e "\033[37m"
exit 1
fi
if [ -f /boot/adsb-config.txt ]; then
echo --------
echo "You are using the adsbx image, the feed setup script does not need to be installed."
echo --------
exit 1
fi
function aptInstall() {
if ! apt install -y --no-install-recommends --no-install-suggests "$@"; then
apt update
if ! apt install -y --no-install-recommends --no-install-suggests "$@"; then
apt clean -y || true
apt --fix-broken install -y || true
apt install --no-install-recommends --no-install-suggests -y $packages
fi
fi
}
packages="git wget unzip curl build-essential python3-dev socat python3-venv ncurses-dev ncurses-bin uuid-runtime libzstd-dev libzstd1 zlib1g-dev zlib1g"
if command -v apt &>/dev/null; then
aptInstall $packages
if ! command -v nc &>/dev/null; then
aptInstall netcat-openbsd || true
fi
elif command -v yum &>/dev/null; then
yum install -y git curl socat python3-virtualenv python3-devel gcc make ncurses-devel nc uuid zlib-devel zlib libzstd-devel libzstd
elif command -v dnf &>/dev/null; then
dnf install -y git curl socat python3-virtualenv python3-devel gcc make ncurses-devel nc uuid zlib-devel zlib libzstd-devel libzstd
fi
hash -r
function revision() {
git rev-parse HEAD 2>/dev/null || echo "$RANDOM-$RANDOM"
}
function getGIT() {
# getGIT $REPO $BRANCH $TARGET (directory)
if [[ -z "$1" ]] || [[ -z "$2" ]] || [[ -z "$3" ]]; then echo "getGIT wrong usage, check your script or tell the author!" 1>&2; return 1; fi
REPO="$1"; BRANCH="$2"; TARGET="$3"; pushd . >/dev/null
if cd "$TARGET" &>/dev/null && git fetch --depth 1 origin "$BRANCH" 2>/dev/null && git reset --hard FETCH_HEAD; then popd >/dev/null && return 0; fi
if ! cd /tmp || ! rm -rf "$TARGET"; then popd > /dev/null; return 1; fi
if git clone --depth 1 --single-branch --branch "$BRANCH" "$REPO" "$TARGET"; then popd > /dev/null; return 0; fi
rm -rf "$TARGET"; tmp=/tmp/getGIT-tmp.$RANDOM.$RANDOM
if wget -O "$tmp" "$REPO/archive/refs/heads/$BRANCH.zip" && unzip "$tmp" -d "$tmp.folder" >/dev/null; then
if mv -fT "$tmp.folder/$(ls "$tmp.folder")" "$TARGET"; then rm -rf "$tmp" "$tmp.folder"; popd > /dev/null; return 0; fi
fi
rm -rf "$tmp" "$tmp.folder"; popd > /dev/null; return 1;
}
REPO="https://github.com/adsbxchange/adsb-exchange.git"
BRANCH="master"
IPATH=/usr/local/share/adsbexchange
GIT="$IPATH/git"
mkdir -p $IPATH
LOGFILE="$IPATH/lastlog"
rm -f $LOGFILE
touch $LOGFILE
getGIT "$REPO" "$BRANCH" "$GIT" >> $LOGFILE
cd "$GIT"
if diff "$GIT/update.sh" "$IPATH/update.sh" &>/dev/null; then
rm -f "$IPATH/update.sh"
cp "$GIT/update.sh" "$IPATH/update.sh"
bash "$IPATH/update.sh"
exit $?
fi
if [ -f /boot/adsb-config.txt ]; then
source /boot/adsb-config.txt
source /boot/adsbx-env
else
source /etc/default/adsbexchange
fi
if [[ -z $INPUT ]] || [[ -z $INPUT_TYPE ]] || [[ -z $USER ]] \
|| [[ -z $LATITUDE ]] || [[ -z $LONGITUDE ]] || [[ -z $ALTITUDE ]] \
|| [[ -z $MLATSERVER ]] || [[ -z $TARGET ]] || [[ -z $NET_OPTIONS ]]; then
bash "$GIT/setup.sh"
exit 0
fi
if [[ "$LATITUDE" == 0 ]] || [[ "$LONGITUDE" == 0 ]] || [[ "$USER" == 0 ]]; then
MLAT_DISABLED=1
else
MLAT_DISABLED=0
fi
# remove previously used folder to avoid confusion
rm -rf /usr/local/share/adsb-exchange &>/dev/null
cp "$GIT/uninstall.sh" "$IPATH"
cp "$GIT"/scripts/*.sh "$IPATH"
UNAME=adsbexchange
if ! id -u "${UNAME}" &>/dev/null
then
# 2nd syntax is for fedora / centos
adduser --system --home "$IPATH" --no-create-home --quiet "$UNAME" || adduser --system --home-dir "$IPATH" --no-create-home "$UNAME"
fi
echo 4
sleep 0.25
# BUILD AND CONFIGURE THE MLAT-CLIENT PACKAGE
progress=4
echo "Checking and installing prerequesites ..."
# Check that the prerequisite packages needed to build and install mlat-client are installed.
# only install chrony if chrony and ntp aren't running
if ! systemctl status chrony &>/dev/null && ! systemctl status ntp &>/dev/null; then
required_packages="chrony "
fi
echo
bash "$IPATH/git/create-uuid.sh"
VENV=$IPATH/venv
if [[ -f /usr/local/share/adsbexchange/venv/bin/python3.7 ]] && command -v python3.9 &>/dev/null;
then
rm -rf "$VENV"
fi
MLAT_REPO="https://github.com/adsbxchange/mlat-client.git"
MLAT_BRANCH="master"
MLAT_VERSION="$(git ls-remote $MLAT_REPO $MLAT_BRANCH | cut -f1 || echo $RANDOM-$RANDOM )"
if [[ $REINSTALL != yes ]] && grep -e "$MLAT_VERSION" -qs $IPATH/mlat_version \
&& grep -qs -e '#!' "$VENV/bin/mlat-client" && { systemctl is-active adsbexchange-mlat &>/dev/null || [[ "${MLAT_DISABLED}" == "1" ]]; }
then
echo
echo "mlat-client already installed, git hash:"
cat $IPATH/mlat_version
echo
else
echo
echo "Installing mlat-client to virtual environment"
echo
# Check if the mlat-client git repository already exists.
MLAT_GIT="$IPATH/mlat-client-git"
# getGIT $REPO $BRANCH $TARGET-DIR
getGIT $MLAT_REPO $MLAT_BRANCH $MLAT_GIT &> $LOGFILE
cd $MLAT_GIT
echo 34
rm "$VENV-backup" -rf
mv "$VENV" "$VENV-backup" -f &>/dev/null || true
if /usr/bin/python3 -m venv $VENV >> $LOGFILE \
&& echo 36 \
&& source $VENV/bin/activate >> $LOGFILE \
&& echo 38 \
&& python3 setup.py build >> $LOGFILE \
&& echo 40 \
&& python3 setup.py install >> $LOGFILE \
&& echo 46 \
&& revision > $IPATH/mlat_version || rm -f $IPATH/mlat_version \
&& echo 48 \
; then
rm "$VENV-backup" -rf
else
rm "$VENV" -rf
mv "$VENV-backup" "$VENV" &>/dev/null || true
echo "--------------------"
echo "Installing mlat-client failed, if there was an old version it has been restored."
echo "Will continue installation to try and get at least the feed client working."
echo "Please repot this error to the adsbexchange forums or discord."
echo "--------------------"
fi
fi
echo 50
# copy adsbexchange-mlat service file
cp "$GIT"/scripts/adsbexchange-mlat.service /lib/systemd/system
echo 60
if ls -l /etc/systemd/system/adsbexchange-mlat.service 2>&1 | grep '/dev/null' &>/dev/null; then
echo "--------------------"
echo "CAUTION, adsbexchange-mlat is masked and won't run!"
echo "If this is unexpected for you, please report this issue"
echo "--------------------"
sleep 3
else
if [[ "${MLAT_DISABLED}" == "1" ]]; then
systemctl disable adsbexchange-mlat || true
systemctl stop adsbexchange-mlat || true
else
# Enable adsbexchange-mlat service
systemctl enable adsbexchange-mlat >> $LOGFILE || true
# Start or restart adsbexchange-mlat service
systemctl restart adsbexchange-mlat || true
fi
fi
echo 70
# SETUP FEEDER TO SEND DUMP1090 DATA TO ADS-B EXCHANGE
READSB_REPO="https://github.com/adsbxchange/readsb.git"
READSB_BRANCH="master"
READSB_VERSION="$(git ls-remote $READSB_REPO $READSB_BRANCH | cut -f1 || echo $RANDOM-$RANDOM )"
READSB_GIT="$IPATH/readsb-git"
READSB_BIN="$IPATH/feed-adsbx"
if [[ $REINSTALL != yes ]] && grep -e "$READSB_VERSION" -qs $IPATH/readsb_version \
&& "$READSB_BIN" -V && systemctl is-active adsbexchange-feed &>/dev/null
then
echo
echo "Feed client already installed, git hash:"
cat $IPATH/readsb_version
echo
else
echo
echo "Compiling / installing the readsb based feed client"
echo
#compile readsb
echo 72
# getGIT $REPO $BRANCH $TARGET-DIR
getGIT "$READSB_REPO" "$READSB_BRANCH" "$READSB_GIT" &> $LOGFILE
cd "$READSB_GIT"
echo 74
make clean
make -j2 AIRCRAFT_HASH_BITS=12 >> $LOGFILE
echo 80
rm -f "$READSB_BIN"
cp readsb "$READSB_BIN"
revision > $IPATH/readsb_version || rm -f $IPATH/readsb_version
echo
fi
#end compile readsb
cp "$GIT"/scripts/adsbexchange-feed.service /lib/systemd/system
echo 82
if ! ls -l /etc/systemd/system/adsbexchange-feed.service 2>&1 | grep '/dev/null' &>/dev/null; then
# Enable adsbexchange-feed service
systemctl enable adsbexchange-feed >> $LOGFILE || true
echo 92
# Start or restart adsbexchange-feed service
systemctl restart adsbexchange-feed || true
else
echo "--------------------"
echo "CAUTION, adsbexchange-feed.service is masked and won't run!"
echo "If this is unexpected for you, please report this issue"
echo "--------------------"
sleep 3
fi
echo 94
systemctl is-active adsbexchange-feed &>/dev/null || {
rm -f $IPATH/readsb_version
echo "---------------------------------"
journalctl -u adsbexchange-feed | tail -n10
echo "---------------------------------"
echo "adsbexchange-feed service couldn't be started, please report this error to the adsbexchange forum or discord."
echo "Try an copy as much of the output above and include it in your report, thank you!"
echo "---------------------------------"
exit 1
}
echo 96
[[ "${MLAT_DISABLED}" == "1" ]] || systemctl is-active adsbexchange-mlat &>/dev/null || {
rm -f $IPATH/mlat_version
echo "---------------------------------"
journalctl -u adsbexchange-mlat | tail -n10
echo "---------------------------------"
echo "adsbexchange-mlat service couldn't be started, please report this error to the adsbexchange forum or discord."
echo "Try an copy as much of the output above and include it in your report, thank you!"
echo "---------------------------------"
exit 1
}
# Remove old method of starting the feed scripts if present from rc.local
# Kill the old adsbexchange scripts in case they are still running from a previous install including spawned programs
for name in adsbexchange-netcat_maint.sh adsbexchange-socat_maint.sh adsbexchange-mlat_maint.sh; do
if grep -qs -e "$name" /etc/rc.local; then
sed -i -e "/$name/d" /etc/rc.local || true
fi
if PID="$(pgrep -f "$name" 2>/dev/null)" && PIDS="$PID $(pgrep -P $PID 2>/dev/null)"; then
echo killing: $PIDS >> $LOGFILE 2>&1 || true
kill -9 $PIDS >> $LOGFILE 2>&1 || true
fi
done
# in case the mlat-client service using /etc/default/mlat-client as config is using adsbexchange as a host, disable the service
if grep -qs 'SERVER_HOSTPORT.*feed.adsbexchange.com' /etc/default/mlat-client &>/dev/null; then
systemctl disable --now mlat-client >> $LOGFILE 2>&1 || true
fi
if [[ -f /etc/default/adsbexchange ]]; then
sed -i -e 's/feed.adsbexchange.com,30004,beast_reduce_out,feed.adsbexchange.com,64004/feed1.adsbexchange.com,30004,beast_reduce_out,feed2.adsbexchange.com,64004/' /etc/default/adsbexchange || true
fi
echo 100
echo "---------------------"
echo "---------------------"
## SETUP COMPLETE
ENDTEXT="
Thanks for choosing to share your data with ADS-B Exchange!
If you're curious, check your feed status after 5 min:
https://adsbexchange.com/myip/
http://adsbx.org/sync
Question? Issues? Go here:
https://www.adsbexchange.com/forum/threads/adsbexchange-setup-scripts.631609/
https://discord.gg/n9dGbkTtZm
Webinterface to show the data transmitted? Run this command:
sudo bash /usr/local/share/adsbexchange/git/install-or-update-interface.sh
"
INPUT_IP=$(echo $INPUT | cut -d: -f1)
INPUT_PORT=$(echo $INPUT | cut -d: -f2)
ENDTEXT2="
---------------------
No data available from IP $INPUT_IP on port $INPUT_PORT!
---------------------
If your data source is another device / receiver, see the advice here:
https://github.com/adsbxchange/wiki/wiki/Datasource-other-device
"
if [ -f /etc/fr24feed.ini ] || [ -f /etc/rb24.ini ]; then
ENDTEXT2+="
It looks like you are running FR24 or RB24
This means you will need to install a stand-alone decoder so data are avaible on port 30005!
If you have the SDR connected to this device, we recommend using this script to install and configure a stand-alone decoder:
https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb
---------------------
"
else
ENDTEXT2+="
If you have connected an SDR but not yet installed an ADS-B decoder for it,
we recommend this script:
https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb
---------------------
"
fi
if ! timeout 5 nc -z "$INPUT_IP" "$INPUT_PORT" && command -v nc &>/dev/null; then
#whiptail --title "ADS-B Exchange Setup Script" --msgbox "$ENDTEXT2" 24 73
echo -e "$ENDTEXT2"
else
# Display the thank you message box.
#whiptail --title "ADS-B Exchange Setup Script" --msgbox "$ENDTEXT" 24 73
echo -e "$ENDTEXT"
fi