Feed adsb.fi using an existing receiver running readsb / dump1090 / piaware / Raspbian / Linux
Find a file
2023-01-27 22:00:27 +01:00
scripts Merge branch 'adsbfi' into darken 2023-01-27 08:49:29 -05:00
configure.sh Fix port collision with adsbx 2023-01-27 22:00:27 +01:00
create-uuid.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
install-or-update-interface.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
install.sh fix git branch and install script 2023-01-27 07:50:56 -05:00
LICENSE.md Finished new mlat-client setup. 2016-08-29 12:25:12 -04:00
README.md Remove non-working adsb.fi URLs 2023-01-27 12:07:18 -07:00
setup.sh Remove non-working adsb.fi URLs 2023-01-27 12:07:18 -07:00
uninstall.sh First draft for adsb.fi 2023-01-27 13:37:16 +01:00
update.sh Remove non-working adsb.fi URLs 2023-01-27 12:07:18 -07:00

ADSB.fi feed client

  • These scripts aid in setting up your current ADS-B receiver to feed ADSB.fi.
  • They will not disrupt any existing feed clients already present

1: Find coordinates / elevation:

https://www.freemaptools.com/elevation-finder.htm

2: Install the adsbfi feed client

curl -L -o /tmp/axfeed.sh https://raw.githubusercontent.com/d4rken/adsb-fi-scripts/master/install.sh
sudo bash /tmp/axfeed.sh

3: Check netstat to check if your feed is working

The feed IP for ADSB.fi is 65.109.2.208

netstat -t -n | grep -E '30004|31090'

Expected Output:

tcp        0    182 localhost:43530     65.109.2.208:31090      ESTABLISHED
tcp        0    410 localhost:47332     65.109.2.208:30004      ESTABLISHED

4: Optional: Install the stats package for an online map that shows only planes received by you:

curl -L -o /tmp/axstats.sh https://raw.githubusercontent.com/d4rken/adsb-fi-scripts/master/stats.sh
sudo bash /tmp/axstats.sh

adsbfi-showurl

Optional: local interface for your data http://192.168.X.XX/adsbfi

Install / Update:

sudo bash /usr/local/share/adsbfi/git/install-or-update-interface.sh

Remove:

sudo bash /usr/local/share/tar1090/uninstall.sh adsbfi

Update the feed client without reconfiguring

curl -L -o /tmp/axupdate.sh https://raw.githubusercontent.com/d4rken/adsb-fi-scripts/master/update.sh
sudo bash /tmp/axupdate.sh

If you encounter issues, please do a reboot and then supply these logs on the forum (last 20 lines for each is sufficient):

sudo journalctl -u adsbfi-feed --no-pager
sudo journalctl -u adsbfi-mlat --no-pager

Display the configuration

cat /etc/default/adsbfi

Changing the configuration

This is the same as the initial installation. If the client is up to date it should not take as long as the original installation, otherwise this will also update the client which will take a moment.

curl -L -o /tmp/axfeed.sh https://raw.githubusercontent.com/d4rken/adsb-fi-scripts/master/install.sh
sudo bash /tmp/axfeed.sh

Disable / Enable adsb.fi MLAT-results in your main decoder interface (readsb / dump1090-fa)

  • Disable:
sudo sed --follow-symlinks -i -e 's/RESULTS=.*/RESULTS=""/' /etc/default/adsbfi
sudo systemctl restart adsbfi-mlat
  • Enable:
sudo sed --follow-symlinks -i -e 's/RESULTS=.*/RESULTS="--results beast,connect,127.0.0.1:30104"/' /etc/default/adsbfi
sudo systemctl restart adsbfi-mlat

Restart

sudo systemctl restart adsbfi-feed
sudo systemctl restart adsbfi-mlat

Systemd Status

sudo systemctl status adsbfi-mlat
sudo systemctl status adsbfi-feed

Removal / disabling the services:

sudo bash /usr/local/share/adsbfi/uninstall.sh

If the above doesn't work, you may be using an old version that didn't have the uninstall script, just disable the services and the scripts won't run anymore:

sudo systemctl disable --now adsbfi-feed
sudo systemctl disable --now adsbfi-mlat