- Go 95.2%
- Python 1.6%
- Starlark 1.5%
- Shell 1.3%
- Rust 0.2%
* fix(prime): honor -C for the local PRIME.md tier, git probes, divergence reminder, and redirect notice (#5509) `bd -C <dir> prime` silently primed the process cwd. -C is implemented as setenv BEADS_DIR (no chdir), so the store and memories already followed the target, but four workspace-relative reads in prime did not: the first-priority .beads/PRIME.md lookup, the AGENTS.md/CLAUDE.md divergence reminder, the git probes (upstream, remotes) behind the default template's git-authority wording, and the template's redirect notice all resolved against the cwd. On the no-PRIME.md path the output for `bd -C repo-b prime` was byte-identical to priming the cwd repo. Add primeWorkspaceDir(), which returns the absolute -C target when set and "" (cwd) otherwise, and resolve all four against it: readCustomPrimeContent takes the workspace dir as a parameter, the reminder takes the same workspace, a new primeGitCmd helper runs isEphemeralBranch and primeHasGitRemote in the -C target (falling back to GitCmdCWD without -C, as before), and primeRedirectInfo asks internal/beads about the -C target through a new GetRedirectInfoFrom(dir). GetRedirectInfo() delegates to the same core for the cwd, so redirect detection without -C is unchanged. The clone-local PRIME.md tier is rebased onto the -C target rather than dropped, so a redirect clone with its own .beads/PRIME.md yields the clone-local file under -C exactly as `cd <dir> && bd prime` does. The workspace is deliberately the -C directory itself, not the parent of the resolved beads dir, which may have followed .beads/redirect or walked up from a subdirectory. Env-only BEADS_DIR redirects are unchanged: without -C the cwd-local PRIME.md still wins (clone-specific customization, GH#876), guarded by TestReadCustomPrimeContent_EnvRedirectStillLocalFirst. Tests: unit coverage for primeWorkspaceDir (absolute, relative, unset), the -C target and redirect-clone PRIME.md tiers, the env-only redirect, the divergence-reminder workspace (redirect and subdirectory cases), and GetRedirectInfoFrom against GetRedirectInfo in both directions plus the non-git walk-up, plus three end-to-end runs (cgo build tag, shared once-per-process bd binary): the issue's two-repo PRIME.md repro, a no-PRIME.md pair where `bd -C repo-b prime` from repo-a must equal `cd repo-b && bd prime` byte for byte while differing from the cwd's own prime (repo-a has a remote and upstream, repo-b has neither and carries divergent AGENTS.md/CLAUDE.md), and a plain-repo/redirect-clone pair where the redirect notice must follow -C in both directions. Fixes #5509 Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(prime): canonicalize the -C repo root and document the shared probes Maintainer review fixes for #6550 (adopt-pr review iteration 1). Nothing here was a merge gate: the scorecard approved at 962/1000 with no required changes. No behavior change on Linux/macOS. - internal/beads: canonicalize the repo root inside repoLocalBeadsDir, the helper both locators share. findLocalBdsDirInRepoFrom handed it raw `git rev-parse --show-toplevel` output while the cwd twin passes git.GetRepoRoot()'s already-normalized value, so on Windows (`C:/...`, msys `/c/...`) the repo-local tier missed and resolution fell through to the walk-up locator - the fallback bd-wayc3 exists to beat. Canonicalizing stays below the "" guard on purpose: utils.CanonicalizePath("") resolves to the process cwd. TestRepoLocalBeadsDirCanonicalizesRepoRoot pins both halves and reds on either mutation (drop the canonicalization; move it above the guard). - internal/beads: document that GetRedirectInfoFrom's fallback drops the worktree-local redirect probe and GetWorktreeFallbackBeadsDir, not only BEADS_DIR. - cmd/bd/prime.go: NOTE that primeHasGitRemote and primeGitCmd have a consumer outside prime (isBackupAutoEnabled), which inherits the -C directory choice. - CHANGELOG: add the Unreleased/Fixed entry for #5509 and disclose that `bd -C dir <any command>` now decides auto-backup enablement from the -C target's git remote rather than the launch directory's. - cmd/bd/prime_embedded_test.go: record why the three -C repros carry the TestEmbedded prefix (fast lanes -skip it, embedded-test-shard.sh discovers shard members by it) and that they need no embedded Dolt. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> Co-authored-by: Julian Knutsen <julianknutsen@users.noreply.github.com> Co-authored-by: Julian Knutsen <julian@knutsen.dev> |
||
|---|---|---|
| .agent/workflows | ||
| .beads/formulas | ||
| .claude | ||
| .claude-plugin | ||
| .devcontainer | ||
| .githooks | ||
| .github | ||
| backend | ||
| beadserrors | ||
| cmd/bd | ||
| docs | ||
| engdocs | ||
| examples | ||
| format | ||
| integrations | ||
| internal | ||
| issueops | ||
| journalops | ||
| memoryops | ||
| npm-package | ||
| plugins/beads | ||
| release-gates | ||
| schema | ||
| scripts | ||
| test | ||
| tests | ||
| tools/docsmint | ||
| winget | ||
| .buildflags | ||
| .gitattributes | ||
| .gitignore | ||
| .golangci.yml | ||
| .goreleaser.yml | ||
| .pre-commit-config.yaml | ||
| .test-skip | ||
| AGENT_INSTRUCTIONS.md | ||
| AGENTS.md | ||
| ARTICLES.md | ||
| beads.go | ||
| beads_cgo.go | ||
| beads_gated_test.go | ||
| beads_nocgo.go | ||
| beads_test.go | ||
| BENCHMARKS.md | ||
| build-docs.md | ||
| CHANGELOG.md | ||
| claim.go | ||
| claim_roundtrip_test.go | ||
| claim_test.go | ||
| CLAUDE.md | ||
| codecov.yml | ||
| CONTRIBUTING.md | ||
| CONTRIBUTING_PR_GUIDELINES.md | ||
| default.nix | ||
| errors_test.go | ||
| export_dependency_add_options_test.go | ||
| FEDERATION-SETUP.md | ||
| flake.lock | ||
| flake.nix | ||
| go.mod | ||
| go.sum | ||
| install.ps1 | ||
| issue_lifecycle_external_test.go | ||
| issue_roles_external_test.go | ||
| issues.jsonl | ||
| LICENSE | ||
| Makefile | ||
| mint.sh | ||
| NEWSLETTER.md | ||
| open_backend_selection_test.go | ||
| open_nocgo_test.go | ||
| overlay.nix | ||
| packages.nix | ||
| PR_MAINTAINER_GUIDELINES.md | ||
| PROPOSAL-cas-conditional-update.md | ||
| PROPOSAL-pluggable-storage-backends.md | ||
| PROPOSAL-pull-config-wedge.md | ||
| query_interfaces_cgo_test.go | ||
| query_interfaces_test.go | ||
| README.md | ||
| RELEASING.md | ||
| renovate.json | ||
| SECURITY.md | ||
| THIRD_PARTY_LICENSES | ||
| VERSIONED-BEADS-WRITE-PATHS.md | ||
bd - Beads
Distributed graph issue tracker for AI agents, powered by Dolt.
Platforms: macOS, Linux, Windows, FreeBSD
Docs: https://beads.gascity.com/
Beads provides a persistent, structured memory for coding agents. It replaces messy markdown plans with a dependency-aware graph, allowing agents to handle long-horizon tasks without losing context.
flowchart LR
create["bd create<br/>new bead"] --> depgraph["dependency<br/>graph"]
depgraph --> ready["bd ready<br/>claimable work"]
ready --> claim["bd update --claim<br/>agent takes it"]
claim --> close["bd close<br/>work done"]
close -->|blockers released| ready
depgraph <-->|"bd dolt push / pull"| remote[("other machines<br/>and agents")]
⚡ Quick Start
# Install beads CLI (system-wide - don't clone this repo into your project)
curl -fsSL https://raw.githubusercontent.com/gastownhall/beads/main/scripts/install.sh | bash
# Initialize in YOUR project
cd your-project
bd init
# Optional: refresh or install richer instructions for your agent
bd setup codex # Codex CLI - installs skill, AGENTS.md guidance, and hooks
bd setup claude # Claude Code - installs hooks/settings
bd setup factory # Factory.ai Droid - creates/updates AGENTS.md
Note: Beads is a CLI tool you install once and use everywhere. You don't need to clone this repository into your project.
bd init creates or updates AGENTS.md by default so agents can discover the beads workflow, and also installs project Claude/Codex integrations unless you pass --skip-agents or --stealth. Use bd setup --list to see supported integrations, including bd setup codex, bd setup factory, bd setup claude, bd setup mux, bd setup cursor, and more. See Agent and IDE setup.
Manual copy-paste is only for unsupported agents, existing projects where you cannot rerun bd init/bd setup, or custom instruction files. In those cases, run bd onboard and paste the printed snippet into the file your agent reads.
If your agent is not covered by bd setup, add this minimal AGENTS.md section:
This project uses bd (beads) for issue tracking.
- Run `bd prime` for workflow context and command guidance.
- Use `bd ready`, `bd show <id>`, `bd update <id> --claim`, and `bd close <id>`.
- Use `bd remember "insight"` for persistent project memory; do not create MEMORY.md files.
- Do not use markdown TODO lists for task tracking.
🛠 Features
- Dolt-Powered: Version-controlled SQL database with cell-level merge, native branching, and built-in sync via Dolt remotes.
- Agent-Optimized: JSON output, dependency tracking, and auto-ready task detection.
- Zero Conflict: Hash-based IDs (
bd-a1b2) prevent merge collisions in multi-agent/multi-branch workflows. - Compaction: Semantic "memory decay" summarizes old closed tasks to save context window.
- Messaging: Message issue type with threading (
--thread), ephemeral lifecycle, and mail delegation. - Graph Links:
relates-to,duplicates,supersedes, andreplies-tofor knowledge graphs.
📖 Essential Commands
| Command | Action |
|---|---|
bd ready |
List tasks with no open blockers. |
bd create "Title" -p 0 |
Create a P0 task. |
bd update <id> --claim |
Atomically claim a task (sets assignee + in_progress). |
bd dep add <child> <parent> |
Link tasks (blocks, related, parent-child). |
bd show <id> |
View task details and audit trail. |
bd prime |
Print agent workflow context and persistent memories. |
bd remember "insight" |
Store project memory that bd prime injects later. |
🔗 Hierarchy & Workflow
Beads supports hierarchical IDs for epics:
bd-a3f8(Epic)bd-a3f8.1(Task)bd-a3f8.1.1(Sub-task)
Stealth Mode: Run bd init --stealth to use Beads locally without committing files to the main repo. Perfect for personal use on shared projects. See Git-Free Usage below.
Contributor vs Maintainer: When working on open-source projects:
- Contributors (forked repos): Run
bd init --contributorto route planning issues to a separate repo (e.g.,~/.beads-planning). Keeps experimental work out of PRs. - Maintainers (write access): Beads auto-detects maintainer role via SSH URLs or HTTPS with credentials. Only need
git config beads.role maintainerif using GitHub HTTPS without credentials but you have write access.
📦 Installation
brew install beads # macOS / Linux (recommended)
npm install -g @beads/bd # Node.js users
Other methods: install script | go install | from source | Windows | Arch AUR
Requirements: macOS, Linux, Windows, or FreeBSD. See docs/getting-started/installation.md for complete installation guide.
Upgrading? Replacing the binary is not always the whole story. Short
version: sync remote-backed databases with your current bd, back up with
bd export --all, upgrade the binary, then run bd info --whats-new,
bd hooks install, and bd version. If the upgrade crosses a schema
migration on a remote-backed database, exactly one designated clone runs
bd migrate and bd dolt push; other clones install the new binary
and run bd bootstrap. See the full
upgrade guide
or docs/getting-started/installation.md.
Security And Verification
Before trusting any downloaded binary, verify its checksum against the release checksums.txt.
The install scripts verify release checksums before install. For manual installs, do this verification yourself before first run.
On macOS, scripts/install.sh preserves the downloaded signature by default. Local ad-hoc re-signing is explicit opt-in via BEADS_INSTALL_RESIGN_MACOS=1.
See docs/reference/antivirus.md for Windows AV false-positive guidance and verification workflow.
💾 Storage Modes
Beads uses Dolt as its database. Two modes:
- Embedded (default) —
bd init. Dolt runs in-process, data lives in.beads/embeddeddolt/, single writer. Recommended for most users. - Server —
bd init --server. Connects to an externaldolt sql-serverfor multiple concurrent writers; data lives in.beads/dolt/.
Cross-machine sync uses bd dolt push / bd dolt pull against
refs/dolt/data on your git remote; .beads/issues.jsonl is an export for
viewers and interchange, not the source of truth or a backup. Back up and
migrate between modes with bd backup; reclaim space with bd prune /
bd purge.
Full detail — connection flags, sockets, maintenance, backup, and migration — in the Dolt backend guide.
Schema Version Guard
bd checks the database schema version at open time. If the database has been
migrated by a newer binary and an older binary tries to open it, bd exits
with an actionable error rather than issuing queries that fail with cryptic SQL
errors:
schema version mismatch: database is at v45, binary knows up to v42 (3 migrations ahead)
Your bd binary is stale. Queries for dropped or renamed columns will fail
with cryptic SQL errors (e.g. "column X could not be found in any table in scope").
Rebuild from main:
CGO_ENABLED=0 go build -tags gms_pure_go ./cmd/bd
Or install the latest release:
CGO_ENABLED=0 go install -tags gms_pure_go github.com/steveyegge/beads/cmd/bd@latest
To proceed despite the risk (some read commands may still work):
BD_IGNORE_SCHEMA_SKEW=1 bd <command>
bd --ignore-schema-skew <command>
When this fires: only when the database schema is ahead of the binary (a newer binary migrated the database; this binary doesn't know those migrations). Normal upgrades, where the binary migrates the database forward, are unaffected.
Escape hatch: BD_IGNORE_SCHEMA_SKEW=1 (or --ignore-schema-skew) bypasses
the guard with a warning on stderr. Use this only if you know the forward
migrations are additive and safe for your specific workload.
🌐 Community Tools
See docs/community-tools.md for a curated list of community-built UIs, extensions, and integrations—including terminal interfaces, web UIs, editor extensions, and native apps.
See docs/related-projects.md for adjacent or complementary projects that solve different problems in the same neighborhood.
🚀 Git-Free Usage
Beads works without git. The Dolt database is the storage backend — git integration (hooks, repo discovery, identity) is optional.
# Initialize without git
export BEADS_DIR=/path/to/your/project/.beads
bd init --quiet --stealth
# All core commands work with zero git calls
bd create "Fix auth bug" -p 1 -t bug
bd ready --json
bd update bd-a1b2 --claim
bd prime
bd close bd-a1b2 "Fixed"
BEADS_DIR tells bd where to put the .beads/ database directory,
bypassing git repo discovery. --stealth sets no-git-ops: true in
config, disabling all git hook installation and git operations.
This is useful for:
- Non-git VCS (Sapling, Jujutsu, Piper) — no
.git/directory needed - Monorepos — point
BEADS_DIRat a specific subdirectory - CI/CD — isolated task tracking without repo-level side effects
- Evaluation/testing — ephemeral databases in
/tmp