- Go 95.2%
- Python 1.6%
- Starlark 1.5%
- Shell 1.3%
- Rust 0.2%
* fix(gate): add-waiter retries contention the store gave up replaying bd gate add-waiter writes the whole waiter list guarded by the version it read and retried only ErrVersionMismatch. A convoy adder therefore failed when its write ended in contention the backend stopped replaying: a serialization failure or deadlock (Dolt/MySQL 1213/1205, Postgres 40001/40P01, uow.IsSerializationError) on a direct route, or a 503 busy (wire.ErrBusy) over HTTP, which bd serve sends when its admission limiter refuses or its transaction retry budget is spent. gateAddWaiterLostRound now retries those like a version miss, under the same jittered backoff and 20-write bound, and a busy answer's Retry-After raises that round's wait, capped at 2s (gateAddWaiterRetryWait). The retry is safe because of how a round is built, not because a 503 means nothing was written: the client maps any 503 to wire.ErrBusy, and a gateway can answer 503 after the write committed. Each round re-reads the gate, deduplicates and writes the whole list guarded by the version it read, so a landed write is found on the re-read (the waiter is never added twice) and a stale list never overwrites a newer one. A server fault (500, e.g. an indeterminate commit) and an unreachable database are still returned at once. TestAddGateWaiterRetriesTransientContention pins the three retried spellings, the bound, busy-after-commit (one write, the waiter once), the 500 / db-unavailable / other-SQLSTATE non-retries, and the capped Retry-After. It is red without the fix. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * fix(gate): bound add-waiter's contention retries and honor Retry-After Review fixups for #7648. - A write lost to contention reaches addGateWaiter only after the store or bd serve has spent a whole replay budget on it (withRetryTx: 5s, 15s in server mode; bd serve's: 15s), so retrying it under the 20-write bound a version miss gets could hold an adder for minutes (about five on the direct server-mode route). Contended writes now get their own bound, gateAddWaiterContentionRetries = 2, like the HTTP client's for a busy read. They still count against gateAddWaiterMaxAttempts, and version misses keep the 20. The const doc states the worst case: three 15s budgets and two 5s waits, about a minute. - A busy answer's Retry-After is waited out as sent, plus the jittered backoff, instead of being capped at 2s. bd serve asks for 5s after a spent budget because a convoy back sooner holds slots and starves reads, and the wire client already bounds the header. The jitter keeps adders answered busy together from retrying together. - When the last write the bounds allow is answered busy, one more read checks the gate before the command fails, with no wait first. A 503 (a gateway's, say) can answer a write that committed, and every earlier round's re-read would have found it; the last write has no round left. A waiter found there is reported as already registered, and a read that fails confirms nothing. - The exhaustion error says "changed on every one of N attempts" only when no write was contended. Otherwise it reads "no write to X was confirmed in N attempts (K answered busy or lost to write contention)": it names the contention, so the operator of a busy server is not sent looking for a concurrent writer, and it does not claim that nothing landed. - gateAddWaiterContended names what maps to each class: Dolt/MySQL 1213/1205 and SQLSTATE 40001/40P01 on the direct route, and wire.ErrBusy from bd serve's busy answer or from a 503 with no code or an unknown one (db_unavailable and events_watch_saturated map to their own sentinels). It also says why Dolt's 1105 "@autocommit transaction rolled back" is not admitted: Dolt raises it for conflicts that a merge inside the transaction left behind, while a write lost to a concurrent writer comes back as 1213. - Tests: 1213 and 1205 rows built as *mysql.MySQLError (the default Dolt route's shape), the contention bound for busy and for 1213 with no wait after the last contended write, version misses not spending it, the three exhaustion wordings, a 5s Retry-After waited whole plus the jitter, a busy answer to the last write at either bound that landed and is found by the extra read, and a failed extra read that confirms nothing. Thirteen mutants each fail at least one subtest: no bound, busy only counted, version misses counted, no jitter, the 2s cap, the old wording, an off-by-one bound, no extra read, an extra read that ignores the waiter, one that takes a failed read as landed, a wait before it, a wait at the end of each round, and the bound checked after the wait. - CHANGELOG entry updated to match. Agent-Signature: claude-code-claude-opus-5-5-max on behalf of Julian Knutsen Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Co-authored-by: Eddie the Engineer <338826946+gascity-eddie[bot]@users.noreply.github.com> |
||
|---|---|---|
| .agent/workflows | ||
| .beads/formulas | ||
| .claude | ||
| .claude-plugin | ||
| .devcontainer | ||
| .githooks | ||
| .github | ||
| backend | ||
| beadserrors | ||
| cmd/bd | ||
| docs | ||
| engdocs | ||
| examples | ||
| format | ||
| integrations | ||
| internal | ||
| issueops | ||
| journalops | ||
| memoryops | ||
| npm-package | ||
| platforms | ||
| plugins/beads | ||
| release-gates | ||
| schema | ||
| scripts | ||
| test | ||
| tests | ||
| third_party | ||
| tools | ||
| winget | ||
| .bazelignore | ||
| .bazelrc | ||
| .bazelversion | ||
| .buildflags | ||
| .gitattributes | ||
| .gitignore | ||
| .golangci.yml | ||
| .goreleaser.yml | ||
| .pre-commit-config.yaml | ||
| .test-skip | ||
| AGENT_INSTRUCTIONS.md | ||
| AGENTS.md | ||
| ARTICLES.md | ||
| beads.go | ||
| beads_cgo.go | ||
| beads_gated_test.go | ||
| beads_nocgo.go | ||
| beads_test.go | ||
| BENCHMARKS.md | ||
| build-docs.md | ||
| BUILD.bazel | ||
| CHANGELOG.md | ||
| claim.go | ||
| claim_roundtrip_test.go | ||
| claim_test.go | ||
| CLAUDE.md | ||
| codecov.yml | ||
| CONTRIBUTING.md | ||
| CONTRIBUTING_PR_GUIDELINES.md | ||
| default.nix | ||
| errors_test.go | ||
| export_dependency_add_options_test.go | ||
| FEDERATION-SETUP.md | ||
| flake.lock | ||
| flake.nix | ||
| gazelle.go.work | ||
| go.mod | ||
| go.sum | ||
| install.ps1 | ||
| issue_lifecycle_external_test.go | ||
| issue_roles_external_test.go | ||
| issues.jsonl | ||
| LICENSE | ||
| Makefile | ||
| mint.sh | ||
| MODULE.bazel | ||
| MODULE.bazel.lock | ||
| NEWSLETTER.md | ||
| open_backend_selection_test.go | ||
| open_nocgo_test.go | ||
| overlay.nix | ||
| packages.nix | ||
| PR_MAINTAINER_GUIDELINES.md | ||
| PROPOSAL-cas-conditional-update.md | ||
| PROPOSAL-pluggable-storage-backends.md | ||
| PROPOSAL-pull-config-wedge.md | ||
| query_interfaces_cgo_test.go | ||
| query_interfaces_test.go | ||
| README.md | ||
| RELEASING.md | ||
| renovate.json | ||
| ROADMAP.md | ||
| SECURITY.md | ||
| THIRD_PARTY_LICENSES | ||
| VERSIONED-BEADS-WRITE-PATHS.md | ||
bd - Beads
Distributed graph issue tracker for AI agents, powered by Dolt.
Platforms: macOS, Linux, Windows, FreeBSD
Docs: https://beads.gascity.com/
Beads provides a persistent, structured memory for coding agents. It replaces messy markdown plans with a dependency-aware graph, allowing agents to handle long-horizon tasks without losing context.
flowchart LR
create["bd create<br/>new bead"] --> depgraph["dependency<br/>graph"]
depgraph --> ready["bd ready<br/>claimable work"]
ready --> claim["bd update --claim<br/>agent takes it"]
claim --> close["bd close<br/>work done"]
close -->|blockers released| ready
depgraph <-->|"bd dolt push / pull"| remote[("other machines<br/>and agents")]
⚡ Quick Start
# Install beads CLI (system-wide - don't clone this repo into your project)
curl -fsSL https://raw.githubusercontent.com/gastownhall/beads/main/scripts/install.sh | bash
# Initialize in YOUR project
cd your-project
bd init
# Optional: refresh or install richer instructions for your agent
bd setup codex # Codex CLI - installs skill, AGENTS.md guidance, and hooks
bd setup claude # Claude Code - installs hooks/settings
bd setup factory # Factory.ai Droid - creates/updates AGENTS.md
Note: Beads is a CLI tool you install once and use everywhere. You don't need to clone this repository into your project.
bd init creates or updates AGENTS.md by default so agents can discover the beads workflow, and also installs the project Claude Code, Codex, and Cursor integrations unless you pass --skip-agents or --stealth. Use bd setup --list to see supported integrations, including bd setup codex, bd setup factory, bd setup claude, bd setup mux, bd setup cursor, and more. See Agent and IDE setup.
Manual copy-paste is only for unsupported agents, existing projects where you cannot rerun bd init/bd setup, or custom instruction files. In those cases, run bd onboard and paste the printed snippet into the file your agent reads.
If your agent is not covered by bd setup, add this minimal AGENTS.md section:
This project uses bd (beads) for issue tracking.
- Run `bd prime` for workflow context and command guidance.
- Use `bd ready`, `bd show <id>`, `bd update <id> --claim`, and `bd close <id>`.
- Use `bd remember "insight"` for durable project facts; keep per-operator preferences in your harness's own memory.
- Do not use markdown TODO lists for task tracking.
🛠 Features
- Dolt-Powered: Version-controlled SQL database with cell-level merge, native branching, and built-in sync via Dolt remotes.
- Agent-Optimized: JSON output, dependency tracking, and auto-ready task detection.
- Zero Conflict: Hash-based IDs (
bd-a1b2) prevent merge collisions in multi-agent/multi-branch workflows. - Compaction: Semantic "memory decay" summarizes old closed tasks to save context window.
- Messaging: Message issue type with threading (
--thread), ephemeral lifecycle, and mail delegation. - Graph Links:
relates-to,duplicates,supersedes, andreplies-tofor knowledge graphs.
📖 Essential Commands
| Command | Action |
|---|---|
bd ready |
List tasks with no open blockers. |
bd create "Title" -p 0 |
Create a P0 task. |
bd update <id> --claim |
Atomically claim a task (sets assignee + in_progress). |
bd dep add <child> <parent> |
Link tasks (blocks, related, parent-child). |
bd show <id> |
View task details and audit trail. |
bd prime |
Print agent workflow context and persistent memories. |
bd remember "insight" |
Store project memory that bd prime injects later. |
🔗 Hierarchy & Workflow
Beads supports hierarchical IDs for epics:
bd-a3f8(Epic)bd-a3f8.1(Task)bd-a3f8.1.1(Sub-task)
Stealth Mode: Run bd init --stealth to use Beads locally without committing files to the main repo. Perfect for personal use on shared projects. See Git-Free Usage below.
Contributor vs Maintainer: When working on open-source projects:
- Contributors (forked repos): Run
bd init --contributorto route planning issues to a separate repo (e.g.,~/.beads-planning). Keeps experimental work out of PRs. - Maintainers (write access): Beads auto-detects maintainer role via SSH URLs or HTTPS with credentials. Only need
git config beads.role maintainerif using GitHub HTTPS without credentials but you have write access.
📦 Installation
brew install beads # macOS / Linux (recommended)
npm install -g @beads/bd # Node.js users
Other methods: install script | go install | from source | Windows | Arch AUR
Requirements: macOS, Linux, Windows, or FreeBSD. See docs/getting-started/installation.md for complete installation guide.
Upgrading? Replacing the binary is not always the whole story. Short
version: sync remote-backed databases with your current bd, back up with
bd export --all, upgrade the binary, then run bd info --whats-new,
bd hooks install, and bd version. If the upgrade crosses a schema
migration on a remote-backed database, exactly one designated clone runs
bd migrate schema and bd dolt push; other clones install the new
binary and run bd bootstrap. See the full
upgrade guide
or docs/getting-started/installation.md.
Security And Verification
Before trusting any downloaded binary, verify its checksum against the release checksums.txt.
The install scripts verify release checksums before install. For manual installs, do this verification yourself before first run.
On macOS, scripts/install.sh preserves the downloaded signature by default. Local ad-hoc re-signing is explicit opt-in via BEADS_INSTALL_RESIGN_MACOS=1.
See docs/reference/antivirus.md for Windows AV false-positive guidance and verification workflow.
💾 Storage Modes
Beads uses Dolt as its database. Two modes:
- Embedded (default) —
bd init. Dolt runs in-process, data lives in.beads/embeddeddolt/, single writer. Recommended for most users. - Server —
bd init --server. Connects to an externaldolt sql-serverfor multiple concurrent writers; data lives in.beads/dolt/.
Cross-machine sync uses bd dolt push / bd dolt pull against
refs/dolt/data on your git remote; .beads/issues.jsonl is an export for
viewers and interchange, not the source of truth or a backup. Back up and
migrate between modes with bd backup; reclaim space with bd prune /
bd purge.
Full detail — connection flags, sockets, maintenance, backup, and migration — in the Dolt backend guide.
Schema Version Guard
bd checks the database schema version at open time. If the database has been
migrated by a newer binary and an older binary tries to open it, bd exits
with an actionable error rather than issuing queries that fail with cryptic SQL
errors:
schema version mismatch: database is at v45, binary knows up to v42 (3 migrations ahead)
Your bd binary is stale. Queries for dropped or renamed columns will fail
with cryptic SQL errors (e.g. "column X could not be found in any table in scope").
Rebuild from main:
CGO_ENABLED=0 go build -tags gms_pure_go ./cmd/bd
Or install the latest release:
CGO_ENABLED=0 go install -tags gms_pure_go github.com/steveyegge/beads/cmd/bd@latest
To proceed despite the risk (some read commands may still work):
BD_IGNORE_SCHEMA_SKEW=1 bd <command>
bd --ignore-schema-skew <command>
When this fires: only when the database schema is ahead of the binary (a newer binary migrated the database; this binary doesn't know those migrations). Normal upgrades, where the binary migrates the database forward, are unaffected.
Escape hatch: BD_IGNORE_SCHEMA_SKEW=1 (or --ignore-schema-skew) bypasses
the guard with a warning on stderr. Use this only if you know the forward
migrations are additive and safe for your specific workload.
🔌 HTTP Backend (experimental)
A workspace can also talk to a remote bd serve over HTTP instead of opening
a local Dolt database — useful for a thin client against a shared server, or
for embedding beads in another program as a library.
# Point this workspace at a server (verifies the server first; writes nothing on failure)
bd connect https://bd.example.com --expect-project-id my-project
# The everyday commands work the same way: create, show, list, update, close,
# dependencies (including `bd dep tree`), comments, ready/count queries, and
# batch apply all round-trip over the wire with the same semantics as a local
# database. So does `bd ready --claim`, except against an older server or while
# any issue holds an unsatisfied external ref: then it lists and claims in two
# steps rather than one transaction (ledger row L14, linked below).
bd create "Fix auth bug" -p 1 -t bug
bd ready --json
bd close bd-a1b2 "Fixed"
# Loopback needs no TLS
bd connect http://127.0.0.1:8080
# Forget the server and restore this workspace's previous backend selection
bd connect --clear
HTTP mode is not a byte-for-byte mirror of local mode, though: some
operations are knowingly refused (the wire has no way to express them) or
degrade to a different-but-not-misreadable behavior (for example, a few
unbounded listing shapes lose single-query snapshot isolation and instead
walk the server page by page). Every one of these is a deliberate, tested
row, never a silent gap — see
engdocs/design/http-divergence-ledger.md
for the full, generated list of what differs and why before depending on an
HTTP-backed workspace for a workflow you haven't checked against it. One
refusal to know up front: bd close --claim-next closes nothing over HTTP,
because the wire's batch close cannot carry the claim. Close without it, then
run bd ready --claim.
Cross-repo dependencies
keep their policy over HTTP. The client resolves each external: reference
against its own external_projects configuration. bd dep tree shows the
reference as a leaf, and while it is unsatisfied the issue stays out of
bd ready and bd ready --claim, and bd close refuses it without
--force. A server that advertises enforcing that policy itself is trusted
to do so instead.
Three CLI-level differences are worth knowing up front:
- IDs resolve exactly: an abbreviated id is not expanded (the wire has no substring search), and a missing id is reported as not found after one lookup.
bd update -s closeddoes not recordclosed_by_session(from--sessionorCLAUDE_SESSION_ID), because the wire's update cannot carry it; the close itself happens as usual.bd closedoes record the session.bd reopen's history entry carries the server's own label.- Contributor auto-routing (
routing.*settings) is read from localconfig.yaml/ environment only, never from the server's settings: its targets are local paths.
bd connect writes two things on success: .beads/metadata.json gets
"backend": "http", and a per-user, never-git-tracked sidecar
(.beads/http_target.json) records the server URL and pinned project id. It
never writes a credential to disk. A bearer credential, if the server
requires one, comes from BEADS_HTTP_TOKEN=host[:port]=<token>, then
BEADS_HTTP_TOKEN_COMMAND=host[:port]=<command> (a helper that prints a
token), then the credentials file, then no credential at all. Both variables
must name the server they are for (a pattern without a port matches that
host on any port); a bare value is refused, because it would be sent to
whatever server the workspace's http_target.json names. Connecting to a
non-loopback server over plain http:// is refused by default (a bearer
credential would cross the network unencrypted) — pass --allow-plaintext to
override, or use https://. Switching a workspace that already selects a
different backend needs --force.
Each read (a GET, or the POST batch get) gives its first attempt 15s, from
when the request is sent, to get the server's response headers
(BEADS_HTTP_RESPONSE_HEADER_TIMEOUT: a duration such as 30s, a number of
seconds, or off). A read whose headers do not arrive in time, or whose
connection is reset, is retried once on another connection, and each retry
is logged to stderr with its count. The retry has no header timer, but it
runs on what is left of the 60s bound on the whole request, counted from
when the first attempt was sent: a slow but healthy read still finishes if
the retry's headers and body together fit in that remainder (about 45s after
a header timeout), and one that needs longer now fails at 60s. The header
timer never cuts off a body that is still streaming; the 60s bound still
does. The events:watch stream's connect gets neither the header timer nor
the retry. On Windows a reset connection is retried only when it surfaces as
an early EOF, because the check matches the Unix reset error (ECONNRESET),
which a Windows reset (WSAECONNRESET) is not. A write gets no
header timer (the server answers a write only after it commits, so a large
one can be slow and healthy) and is never retried; if the 60s bound expires
after it was sent but before its headers, it fails with an error naming the
server's host, because it may or may not have been applied. A batch apply of
more than 100 items (a large bd create --graph plan, say) gets 6 minutes
instead of 60s, because bd serve gives such a request its
--large-apply-ceiling (5 minutes by default) and finishes it even after the
client has given up. A server whose ceiling is raised past about 5m15s can
still outlast the client. A dial or TLS timeout stays a plain connection
error, since the server never saw the request. off turns off only the
header timer: a reset read is still retried, and a write's timeout is still
reported as above.
bd search, bd show --current and bd recompute-blocked work over HTTP
too, each in its own way. bd search asks the server's listing with its text (q, behind the issues.list.search capability) and
refuses before dialing against a server that does not advertise it. bd list --no-assignee, --title and --id likewise ride the listing's
no_assignee, title and repeatable id, each behind its own capability
(issues.list.noAssignee, issues.list.title, issues.list.ids).
bd show --current finds the actor's in-progress or hooked issue through the
server's boolean query. bd recompute-blocked is a no-op that exits 0: the
server maintains is_blocked on every write, and repairing a stale flag is
done in the server's own workspace (--json reports
{"rows_corrected": 0, "maintained_by": "server"}).
An embedding program that links beads as a library rather than running
cmd/bd registers this backend itself through the public
backend/http package (bdhttp.Register), and can open a
workspace with a credential scoped to one caller via
beads.OpenBestAvailableWith — see that package's doc comment for the
multi-tenant case. This surface is EXPERIMENTAL: pin an exact beads version.
🌐 Community Tools
See docs/community-tools.md for a curated list of community-built UIs, extensions, and integrations—including terminal interfaces, web UIs, editor extensions, and native apps.
See docs/related-projects.md for adjacent or complementary projects that solve different problems in the same neighborhood.
🚀 Git-Free Usage
Beads works without git. The Dolt database is the storage backend — git integration (hooks, repo discovery, identity) is optional.
# Initialize without git
export BEADS_DIR=/path/to/your/project/.beads
bd init --quiet --stealth
# All core commands work with zero git calls
bd create "Fix auth bug" -p 1 -t bug
bd ready --json
bd update bd-a1b2 --claim
bd prime
bd close bd-a1b2 "Fixed"
BEADS_DIR tells bd where to put the .beads/ database directory,
bypassing git repo discovery. --stealth sets no-git-ops: true in
config, disabling all git hook installation and git operations.
This is useful for:
- Non-git VCS (Sapling, Jujutsu, Piper) — no
.git/directory needed - Monorepos — point
BEADS_DIRat a specific subdirectory - CI/CD — isolated task tracking without repo-level side effects
- Evaluation/testing — ephemeral databases in
/tmp
📝 Documentation
- Documentation site | Installing | Sync Concepts | Agent Setup | Copilot CLI Setup | Copilot VS Code MCP | Articles | Sync Branch Mode | Troubleshooting | FAQ
- Contributing: CONTRIBUTING.md (Bazel builds and tests beads: install Bazelisk, then
make test) | Roadmap | Contributor agent instructions