README: update refs to bladeRF-flash (Fixes: #295)
Not 100% certain I like the answer to "If your board is stuck," but I do believe the 'recover' command is built for this. Maybe we need a wiki page or additional interactive help?
This commit is contained in:
parent
e9570df455
commit
51dede1451
1 changed files with 3 additions and 3 deletions
|
|
@ -16,9 +16,9 @@ The source is organized as follows:
|
|||
2. Fetch the latest pre-built bladeRF [FPGA image]. See the README.md in the [hdl] directory for more information.
|
||||
3. Fetch the latest pre-built bladeRF [firmware image]. See the README.md in the [fx3_firmware] directory for more information.
|
||||
4. Follow the instructions in the [host] directory to build and install libbladeRF and the bladeRF-cli utility.
|
||||
5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
|
||||
6. If you haven't upgraded your firmware, run ```bladeRF-flash -f <path_to_prebuilt_firmware>```. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
|
||||
- If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see [bladeRF-flash] for additional details.
|
||||
5. Attach the bladeRF board to your fastest USB port.
|
||||
6. If you haven't upgraded your firmware, run ```bladeRF-cli -f <path_to_prebuilt_firmware>```. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
|
||||
- If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see the recovery command in bladeRF-cli for additional details.
|
||||
7. You should now be able to see your device in the list output via ```bladeRF-cli -p```
|
||||
8. See the overview of the [bladeRF-cli] for more information about loading the FPGA and using the command line interface tool
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue