Vanya A. Sergeev
a137aefba5
libbladeRF: add rf port methods
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
bccd7e19f7
libbladeRF: migrate api to 64-bit frequency
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
80a0ec0658
libbladeRF: add get board name method
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
54296975ed
libbladeRF: add get range methods for sample rate, bandwidth, frequency
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
ad77aa9a8e
libbladeRF: add generic gain methods
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
b4590950f4
libbladeRF: add bladerf_stream_layout concept for mimo streams
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
18c199a358
libbladeRF/doc: move macros after typedefs and enums in doxygen rendering
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
9062b66d9c
libbladeRF: migrate bladerf_module to bladerf_channel and bladerf_direction
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
823f15da5a
libbladeRF: reorganize generic from board specific functions in public API
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
0b814debbf
libbladeRF/backend: add ina219 accessors
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
753614b487
libbladeRF/driver: clarify type in platform wrapper of ad9361 driver
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
eb01b04658
libbladeRF/driver/ad9361: add error handling to adc and dac core subdrivers
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
e3645a21f8
libbladeRF/driver/ad9361: remove id_no index into dac state in dac subdriver
2017-12-21 12:54:58 -05:00
Ryan Tucker
ffe5fe98c0
hdl/analogdevicesinc: add README file with instructions
2017-12-21 12:54:58 -05:00
Brian Glod
3ee2b95eaa
ip: adi: Fix PLL resets
...
The separate resets for the RX PLL and TX PLL prevented the PLLs from
being merged and thus prevented fitting in the device due to lack of
valid PLL locations. Because we want them to be merged, just use one
reset block to reset "both" PLLs.
In the future (after the TX/RX interfaces have been validated), we can
configure the LVDS cores to have an external PLL to make it explicit.
2017-12-21 12:54:58 -05:00
Brian Glod
8ec6b94247
hdl/ip/adi: Fix path to pll_reset in axi_ad9361.qip
2017-12-21 12:54:58 -05:00
Brian Glod
9d295cbf06
ip: adi: Connect PLL reset controllers
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
4ab8e67404
libbladeRF/driver: add subtree update instructions to ad9361 driver
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
34ed7b6b24
libbladeRF/driver: call adc and dac init in axiadc init of ad9361 driver
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
0ff3e78166
libbladeRF/driver: add axi adc platform backend wrappers to ad9361 driver
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
9abf887a84
libbladeRF/driver: add error handling to axi adc methods in ad9361 driver
2017-12-21 12:54:58 -05:00
Robert Ghilduta
c01931a920
libbladeRF/driver: fix compilation errors
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
32094b43a4
libbladeRF/driver: use rffe control in ad9361 platform wrapper
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
b2bac5705d
libbladeRF/backend: refactor ad9361 spi methods into separate read/write ones
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
d5777c866b
libbladeRF/driver: add platform backend wrappers to ad9361 driver
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
8541290c55
libbladeRF/driver: refactor spi and gpio objects in ad9361 driver
2017-12-21 12:54:58 -05:00
Vanya A. Sergeev
9014d442a2
libbladeRF: add adi no-os ad9361 driver
2017-12-21 12:54:58 -05:00
Brian Glod
b166b90fdb
bladerf-micro: sdc: Fix FIFO false path
...
The -to target was invalid due to changing the FIFO hierarchy in a
previous commit.
2017-12-21 12:54:58 -05:00
Brian Glod
faeb51e6d5
bladerf-micro: Add DCFIFO wrappers
...
- tx_fifo
- rx_fifo
- tx_meta_fifo
- rx_meta_fifo
This lets us avoid using MegaFunctions. The wrappers configure sane
DCFIFO defaults, but may also be overridden.
2017-12-21 12:54:58 -05:00
Brian Glod
5d5243110e
bladerf-micro: hdl: Generate PLLs in build script
...
Move component declarations to bladerf_p.vhd package.
2017-12-21 12:54:58 -05:00
Brian Glod
b98350bb3e
ip: nuand: Improve time_tamer|compare_time timing closure
...
The compare_time <= timestamp comparison is problematic for timing
closure in some designs because it takes much longer than a simple
equivalency check. The less than portion is (probably) not needed.
2017-12-21 12:54:57 -05:00
Brian Glod
a0634c8794
bladerf-micro: pins: Update pinout for proto2
...
- Rename: exp_present_n --> exp_present
- Add: exp_clock_req
- Add: exp_clock_en
- Included clocks in exp_gpio[*] nomenclature, so exp_gpio[14:28] were
adjusted to exp_gpio[14:31]
2017-12-21 12:54:57 -05:00
Ryan Tucker
001366f266
hdl/synchronizer: explicitly identify this as a synchronizer
2017-12-21 12:54:57 -05:00
Brian Glod
ce7a8f89a2
bladerf-micro: hdl: Add sync to rxtrig:signal_out
...
This signal was crossing from the 80 MHz domain to the rx_clock domain
directly and causing timing violations.
2017-12-21 12:54:57 -05:00
Brian Glod
5875cc55b1
bladerf-micro: sdc: JTAG constraints
2017-12-21 12:54:57 -05:00
Brian Glod
49148c1c57
bladerf-micro: sdc: Constrain OpenCores I2C
2017-12-21 12:54:57 -05:00
Brian Glod
ada82a00a9
bladerf-micro: sdc: Add ADF400x SPI constraints
2017-12-21 12:54:57 -05:00
Robert Ghilduta
a5417282f6
Add power mux control pins
fpga-dev_pins_proto1
2017-12-21 12:54:57 -05:00
Brian Glod
43b425d3dd
bladerf-micro: sdc: Cleanup timing constraints
...
- Added false path to slow/asynchronous outputs:
- ps_sync_*
- tx_bias_en, rx_bias_en
- fx3_uart_cts
- Deleted obsolete constraint (signals no longer exist)
- iq_correction:*
2017-12-21 12:54:57 -05:00
Brian Glod
3a62096dfb
bladerf-micro: hdl: Connect expansion GPIO
...
Renamed exp_clock_in and exp_clock_out to exp_gpio[31:28].
2017-12-21 12:54:57 -05:00
Brian Glod
3744027262
common: nios: Move IQ Correction to bladeRF1
...
Not needed in bladeRF2, so moved from common to bladeRF1-only.
The #ifdefs are supposed to be temporary until the code can be
refactored for multi-platform support.
2017-12-21 12:54:57 -05:00
Brian Glod
2437703b85
bladerf: nios: Temporary fix for ADI and bladeRF1
...
This gets bladeRF1 to build.
TODO: fix NIOS code to support multiple platforms without using
gratuitous #ifdefs!
2017-12-21 12:54:57 -05:00
Brian Glod
d48e59066f
build: Change flow from 'none' to 'gen'
...
More accurate description of what the flow is. The 'gen' flow only
generates the Quartus projects and other dependencies. It does not
perform synthesis, fitting, etc. As a result 'gen' is a more appropriate
flow name than 'none'.
2017-12-21 12:54:57 -05:00
Ryan Tucker
ce56a40fc3
fix inferred latch on tx_meta_fifo_data
2017-12-21 12:54:57 -05:00
Vanya A. Sergeev
c2ac55c6c2
libbladeRF/bladerf2: enable ad3961 tx tuning
2017-12-21 12:54:57 -05:00
Vanya A. Sergeev
44700332a2
libbladeRF/driver: fix bounds of for-loop copy in ad9361 driver
2017-12-21 12:54:57 -05:00
Vanya A. Sergeev
29f193fcb9
libbladeRF/driver: define altera platform in config for ad9361 driver
2017-12-21 12:54:57 -05:00
Vanya A. Sergeev
f8eb3ae4b1
libbladeRF/driver: call adc and dac init in axiadc init of ad9361 driver
2017-12-21 12:54:57 -05:00
Vanya A. Sergeev
500517f796
libbladeRF/driver: add adc and dac core subdrivers to ad9361 driver
2017-12-21 12:54:57 -05:00
Vanya A. Sergeev
a97ea1824c
libbladeRF/bladerf2: enable fpga and firmware flashing methods
...
using the bladerf1 spi flash helpers for now.
2017-12-21 12:54:57 -05:00