Commit graph

1,984 commits

Author SHA1 Message Date
Ian Frasch
fcd775f2b9 bladeRF-fsk: Fixed misinformation in README.md
- Made changes to the readme which were meant to be part of the
    initial bladeRF-fsk commit, but were not.

- Also added a comment to rx_ch_filter.h, regarding MATLAB

- Cleaned up trailing whitespace.
2016-08-24 10:05:05 -04:00
Brian Padalino
96a99c02cc fsk: Removing warnings.
Added a return to main() and initializing variables to remove
warnings when building code.
2016-08-23 17:41:37 -04:00
Jon Szymaniak
4de1d02e65 bladeRF-fsk: Fixed 32-bit Windows build issue
Narrowing conversion requires a sanity check and cast.
2016-08-22 16:58:49 -04:00
Ian Frasch
63afe69ac5 bladeRF-fsk: Added support for Visual studio 2012
- Added round() and roundf() functions for VS version 2012 and below, since
    they lack implementation of these functions

- Minor formatting edits to make the compiler (v17.00.50727.1) happy
2016-08-22 16:13:20 -04:00
Jon Szymaniak
eaef4fd70b Updated CONTRIBUTORS 2016-08-22 16:11:33 -04:00
Jon Szymaniak
6d5b456340 bladeRF-fsk: Use inttypes macros to print uint64_t
This addresses a build issue on OSX.
2016-08-16 18:58:22 -04:00
Jon Szymaniak
589ceea0bd bladeRF-fsk: Fixed uninitialized variable in correlator test program
Ensure status is defaulted to a failure code.
2016-08-16 17:49:58 -04:00
Ian Frasch
d7c4506f2b bladeRF-fsk: Added bladeRF-fsk utility
This commit introduces a new utility which is a bladeRF-to-bladeRF text/file
transfer program. The program uses a custom FSK software modem (implemented in
host-side C code) to send/receive data. Included is a Matlab/Octave
simulation/implementation of the modem's physical layer. Supports
Windows/Linux/OSX. More info can be found in the README.md.

This utility now builds/installs as part of the bladeRF host side code. Meaning
it is included when building the host software from the source.
2016-08-15 13:33:44 -04:00
Jon Szymaniak
3734f5c46a bladeRF-cli: Corrected incorrect frequency increment in help text
As of 1154ef7b, the calibration table generation uses a default of
10 MHz increments. This was changed due to the tradeoff between
improved results and a longer calibration run-time.

Fixes #480
2016-07-12 18:45:19 -04:00
Jon Szymaniak
ab12ebd3fb bladeRF 2016.06 release 2016.06 2016-06-29 17:24:49 -04:00
Jon Szymaniak
a865682aca debian: Updated FX3 FW and FPGA bitstream post-install scripts 2016-06-29 16:45:06 -04:00
Jon Szymaniak
e4e7ef896a matlab: Updated version to v0.1.2 matlab-v0.1.2 2016-06-29 14:35:17 -04:00
Jon Szymaniak
587e4ac5c2 libbladeRF: Updated to v1.7.2 libbladeRF_v1.7.2 2016-06-29 11:55:21 -04:00
Jon Szymaniak
209dd7f647 libbladeRF: Added API docs link to README 2016-06-29 11:42:22 -04:00
Jon Szymaniak
d5718ca816 cmake: Updated FindLibUSB path default for v1.0.20 2016-06-27 15:17:35 -04:00
Brian Padalino
d4642214cd libbladeRF: Initialize device sooner.
Initialize the device upon opening it before trying to cancel
any pending retune operations.  In the cases of autoloaded FPGA
images, the sample clocks are not running and can cause the NIOS
to hang when trying to cancel pending retune operations.  This is
alleviated by initializing the device first, ensuring clocks are
running, and then proceeding.
2016-06-21 18:32:22 -04:00
Ian Frasch
d7b7eb3d15 host/misc/matlab: Fixed clamping on q samples.
Range should be [-2048,2047].
2016-06-06 11:30:14 -04:00
Jon Szymaniak
0bed16aa6b libbladeRF: doc: Be consistent with section name capitalization 2016-05-28 18:06:38 -04:00
Jon Szymaniak
9a72fc4211 libbladeRF: doc: Typo fix - removed trailing ] characters 2016-05-28 18:04:45 -04:00
Jon Szymaniak
03aabe30a1 libbladeRF: Updated to v1.7.1 libbladeRF_v1.7.1
Documentation-only changes since v1.7.0.
2016-05-28 17:47:03 -04:00
Jon Szymaniak
2a01f9d8fd libbladeRF: doc: Typo fix 2016-05-28 17:41:12 -04:00
Jon Szymaniak
a83c62d92d libbladeRF: doc: Corrected & clarified metadata format description
- Removed incorrect block size, and noted this for both Hi-Speed
    and SuperSpeed configurations.

- Attempted to make this description clearer by keeping things
    in units of samples, where possible.

- Explicitly noted that callers of the sync interface do not need
    to be concerned with underlying metadata position and layout --
    only async interface users do.

- Added link to libbladeRF's `metadata.h` for reference.
2016-05-28 17:39:07 -04:00
Jon Szymaniak
4f2022e8f5 libbladeRF: doc: Place section descriptions at the top of pages 2016-05-28 17:08:53 -04:00
Jon Szymaniak
7a82ed7e3a libbladeRF: doc: Moved and clarified bladerf_get_timestamp() usage
This function was incorrectly located in the "Low-Level" group.

There has been some confusion reported about how to properly use this
function.  As such, the description has been updated to better describe
when to use this function versus the timestamp metadata mechanisms.
2016-05-28 17:02:54 -04:00
Jon Szymaniak
1a35d78a4e libbladeRF: doc: Explicitly note trigger example's clock config assumptions 2016-05-28 16:20:37 -04:00
Jon Szymaniak
579f8f7118 libbladeRF: doc: Describe bladerf_set_smb_mode() usage for MIMO config 2016-05-28 16:19:47 -04:00
Jon Szymaniak
01382f5103 hdl: Added missing v0.6.0 CHANGLOG update
This was missed in 5e2e9a3add.
2016-05-25 13:30:44 -04:00
Jon Szymaniak
0b6c76f848 bladeRF-cli: Updated to v1.4.0 bladeRF-cli_v1.4.0 2016-05-22 19:40:00 -04:00
Jon Szymaniak
2d3f16b47c libbladeRF: Updated to v1.7.0 libbladeRF_v1.7.0 2016-05-22 19:39:55 -04:00
Jon Szymaniak
085239c834 libbladeRF: doc: Corrected typo and added clarification 2016-05-22 19:20:28 -04:00
Jon Szymaniak
ca40176be6 libbladeRF: doc: Added note about disabling triggers before stream deinit 2016-05-22 19:20:28 -04:00
Jon Szymaniak
5502128b2b libbladeRF: doc: Noted thread-safe proerties of API groups 2016-05-22 19:20:28 -04:00
Jon Szymaniak
dfd4255f66 libbladeRF: doc: Simplified API doc layout, main page cleanup
- Hit redundant "Related Pages". This just lists what we have on the
    main page.

- Renamed "Modules" to "API Sections"

- Removed "Data Structures". This just provided a redundant information
    in an awkward manner.

- Removed "Files". This provided little value over just looking at
    libbladeRF.h directly.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
c398f28466 libbladeRF: doc: Moved Error codes section 2016-05-22 19:20:28 -04:00
Jon Szymaniak
086b169be2 libbladeRF: doc: Moved bootloader group after loading/programming
These are loosely related enough to be grouped closer together.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
b0e7111abf libbladeRF: doc: Moved "Misc" function group 2016-05-22 19:20:28 -04:00
Jon Szymaniak
5ea3f34a99 libbladeRF: doc: Created and updated RX/TX module group 2016-05-22 19:20:28 -04:00
Jon Szymaniak
7134873170 libbladeRF: doc: Moved Expansion IO functions
These are more appropriately located near the expansion board
controls.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
535bc44210 libbladeRF: doc: Moved XB functions to their own group. 2016-05-22 19:20:28 -04:00
Jon Szymaniak
055bbef224 libbladeRF: doc: Moved calibration and correction fns to a group 2016-05-22 19:20:28 -04:00
Jon Szymaniak
c787bc05da libbladeRF: doc: Renamed "Triggers and synchronization" section 2016-05-22 19:20:28 -04:00
Jon Szymaniak
31fdb8819d libbladeRF: doc: Moved SMB clock port and trigger groups up 2016-05-22 19:20:28 -04:00
Jon Szymaniak
8fb9ab0808 libbladeRF: doc: Moved bladerf_lpf_mode to bandwidth section 2016-05-22 19:20:28 -04:00
Jon Szymaniak
7547edb967 libbladeRF: doc: Moved loopback items to their own group 2016-05-22 19:20:28 -04:00
Jon Szymaniak
f230efce7a libbladeRF: doc: Moved tuning functions to their own group 2016-05-22 19:20:28 -04:00
Jon Szymaniak
2390f7b187 libbladeRF: Added missing CALL_CONV to bladerf_set_usb_reset_on_open() 2016-05-22 19:20:28 -04:00
Jon Szymaniak
c4e904c2b6 libbladeRF: doc: Moved "devinfo" functions to init/deinit group
The use of bladerf_devinfo is generally part of initialization
code. Thus it is more appropriate to include these functions in
this group.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
fdb37c0a21 libbladeRF: doc: Moved bladerf_dev_speed to device properties API section 2016-05-22 19:20:28 -04:00
Jon Szymaniak
fe48d9a49f libbladeRF: doc: Moved device property functions up in API header 2016-05-22 19:20:27 -04:00
Jon Szymaniak
d945cc8d1b libbladeRF: doc: Moved bandwidth functions to their own API doc group 2016-05-22 19:20:27 -04:00