Robert Ghilduta
689d6da345
host: python v1.3.0
python_v1.3.0
2023-02-13 03:28:19 -08:00
Robert Ghilduta
df5b47e651
libbladeRF: rename bladerf_set_feature to bladerf_enable_feature
2023-02-13 03:28:19 -08:00
Ryan Thompson
c8e3ff3c3a
Revert "DEBUG: sys, c5, and tx clks tied to LEDs"
...
This reverts commit a3bce1308eceba4e02d5a9274cda7ec1a9606136.
2023-02-13 03:28:19 -08:00
Ryan Thompson
26bba04947
Revert "bladeRF-cli: experimental TX warning when OVERSAMPLE enabled"
...
This reverts commit 8b249c2446e5ab3c48b40d8b8518c441976fe1c0.
2023-02-13 03:28:19 -08:00
Ryan Thompson
ce979043b6
libbladeRF: oversample TX bandwidth limit extened
...
The TX bandwidth was previously constrained to 1/2 BW with the
oversample feature enabled. Now it reaches the whole bandwidth.
2023-02-13 03:28:19 -08:00
Ryan Thompson
a9d7824595
libbladeRF: 8bit format block for non-bladeRF 2.0 devices
2023-02-13 03:28:19 -08:00
Ryan Thompson
2291113eb1
libbladeRF: oversample gain limit implemented
...
It seems like the ad9361 resets the sample rate OC if the gain val > 11.
2023-02-13 03:28:19 -08:00
Ryan Thompson
de7ba9076b
bladeRF-cli: 8bit mode requires bladeRF 2.0 device
2023-02-13 03:28:19 -08:00
Ryan Thompson
8b6323b7f3
bladeRF-cli: bitmode error handling cleaned up
2023-02-13 03:28:19 -08:00
Ryan Thompson
739946c676
bladeRF-cli: incorporated better error handling in set_feature
2023-02-13 03:28:19 -08:00
Ryan Thompson
8b47973dda
libbladeRF: set feature blocks unsupported boards
2023-02-13 03:28:19 -08:00
Ryan Thompson
0dac86aaa8
bladeRF-cli: register clear moved to feature set
...
bladeRF reboot will take place when the the feature is set back to default. This resets the OC register config.
2023-02-13 03:28:19 -08:00
Ryan Thompson
06d2fb1b84
bladeRF-cli: 8bit binary file format added and 8bit RX write corrected
2023-02-13 03:28:19 -08:00
Ryan Thompson
c6095de4a8
bladeRF-cli: generalized CSV file format
...
With the introduction of 8bit formats, it doesn't make much sense to
make a 16bit CSV format. It works just the same as 8bit would.
2023-02-13 03:28:19 -08:00
Ryan Thompson
a37f40045e
libbladeRF: BLADERF_FEATURE prefix prepended to feature names
2023-02-13 03:28:19 -08:00
Ryan Thompson
58bed4a3f3
libbladeRF: sync stream blocks 16bit format with OVERSAMPLE enabled
2023-02-13 03:28:19 -08:00
Ryan Thompson
92d77fb8fb
bladeRF-cli: experimental TX warning when OVERSAMPLE enabled
2023-02-13 03:28:19 -08:00
Ryan Thompson
746e528718
bladeRF-cli: OVERSAMPLE feature assign warns user to set samplerate
...
The bitmode warning has been transferred to a feature set warning as
the feature is now responsible for telling libbladeRF to OC the
AD9361.
2023-02-13 03:28:19 -08:00
Ryan Thompson
28f3c7afb6
libbladeRF: get samplerate OC compensation move to libbladeRF
...
libbladeRF now doubles the returned sample rate when OVERSAMPLE feature
is enabled. This is necessary as the AD9361 is not self aware of its
overclock but libbladeRF is.
2023-02-13 03:28:19 -08:00
Ryan Thompson
da14b08f5c
libbladeRF: OVERSAMPLE and DEFAULT sample rate guards implemented
...
Setting the sample rate will now check with the currently enabled
feature. It tests if the sample rate is possible like before
and then checks if the currently enabled feature allows it.
2023-02-13 03:28:19 -08:00
Ryan Thompson
8903adb0ea
libbladeRF: set samplerate OC compensation moved to libbladeRF
...
libbladeRF now halves the sent sample rate when OVERSAMPLE feature
is enabled. This is necessary as the AD9361 is not self aware of its
overclock but libbladeRF is.
2023-02-13 03:28:19 -08:00
Ryan Thompson
86a4cda5bd
libbladeRF: AD9361 OC moved to libbladeRF
...
AD9361 OC moved from bladeRF-cli to libbladeRF
2023-02-13 03:28:19 -08:00
Ryan Thompson
8ab43dff7f
bladeRF-cli: over sample feature blocks 16bit bitmode when enabled
...
When 8bit bitmode is enabled with oversample is set, the user is
notified that it is not permitted.
2023-02-13 03:28:19 -08:00
Ryan Thompson
d018efdde1
bladeRF-cli: OC now feature dependent
2023-02-13 03:28:19 -08:00
Ryan Thompson
89f909e174
bladeRF-cli: feature set/get added to cli
2023-02-13 03:28:19 -08:00
Ryan Thompson
eb1e7ed7e2
libbladeRF: feature set/get added to board
2023-02-13 03:28:19 -08:00
Ryan Thompson
1fa238d2d6
libbladeRF: features added to libbladeRF header
2023-02-13 03:28:19 -08:00
Ryan Thompson
e2f5b369d4
libbladeRF: usleep no longer necessary per fix to stream format config
2023-02-13 03:28:19 -08:00
Ryan Thompson
f29b315e8b
DEBUG: sys, c5, and tx clks tied to LEDs
2023-02-13 03:28:19 -08:00
Ryan Thompson
d27db404c4
bladeRF-cli: 8bit interactive help added to tx, rx, and generate
2023-02-13 03:28:19 -08:00
Ryan Thompson
711a1055b8
libbladeRF: carriage return included in libusb errors
2023-02-13 03:28:19 -08:00
Ryan Thompson
6c1ce329c9
bladeRF-cli: 8bit csv conversion notification
...
CSV conversion notification corrected for CSV->SC8 Q7 conversion
2023-02-13 03:28:19 -08:00
Ryan Thompson
dcd50e2bf3
bladeRF-cli: bitmode change limited
...
The bit mode is only assigned if the requested bit mode is different
than the current bit mode.
2023-02-13 03:28:19 -08:00
Ryan Thompson
14cc910436
bladeRF-cli: print samplerate 8bit mode support
2023-02-13 03:28:19 -08:00
Ryan Thompson
ae79cfa35c
bladeRF-cli: set samplerate prints appropriate values for 8bit mode
2023-02-13 03:28:19 -08:00
Ryan Thompson
b87a231e5e
bladeRF-cli: fast sample rate recommendation
...
Samples rates set between 61.44MHz and 122.88MHz will receive a
recommendation to swtich to 8bit mode.
2023-02-13 03:28:19 -08:00
Ryan Thompson
d44aeea715
bladeRF-cli: AD9361 OC added
...
Setting the bit mode to 8bit along with a sample rate reassignment
will over clock the AD9361
2023-02-13 03:28:19 -08:00
Ryan Thompson
5ce0abfba1
bladeRF-cli: rxtx_data resolved through cli_state
2023-02-13 03:28:19 -08:00
Ryan Thompson
b5d792a970
bladeRF-cli: tx_csv_to_sc16q11() changed to tx_csv_to_bladerf_format()
2023-02-13 03:28:19 -08:00
Ryan Thompson
3998f35749
bladeRF-cli: RX accepts 8bit samples
...
RX can decode and write incoming 8bit samples to a CSV
given the bitmode has been set to 8bit.
2023-02-13 03:28:19 -08:00
Ryan Thompson
5c8621c0b9
hdl: 8bit loopback mode support added
2023-02-13 03:28:19 -08:00
Ryan Thompson
da350b0b4a
bladeRF-cli: generate magnitude reduced for 8bit samples
2023-02-13 03:28:19 -08:00
Robert Ghilduta
c15525d640
bladeRF-cli: 8bit CSV sample conversion implemented in TX
2023-02-13 03:28:19 -08:00
Ryan Thompson
6162224ebb
bladeRF-cli: print and set bitmode functions implemented
2023-02-13 03:28:19 -08:00
Ryan Thompson
781bc5d93d
bladeRF-cli: bitmode state added
2023-02-13 03:28:19 -08:00
Robert Ghilduta
bed0a3b8fb
libbladeRF: add missing sc8 <-> sample conversion
2023-02-13 03:28:19 -08:00
Robert Ghilduta
d7bd9e7c14
bladeRF-cli: missing return value check
2023-02-13 03:28:19 -08:00
Robert Ghilduta
4edbdcf92b
hdl: wire up eight_bit_mode_en -> eightbit_en_tx
2023-02-13 03:28:19 -08:00
Robert Ghilduta
1e5c81bb7b
hdl: fix shifting
2023-02-13 03:28:19 -08:00
Robert Ghilduta
630ffda3e9
bladeRF-cli: standardize capitalization
2023-02-13 03:28:19 -08:00