bladeRF/host/libraries/libbladeRF/include/libbladeRF.h
Jon Szymaniak 439e099b01 libbladeRF: Renamed configuration GPIO read/write functions
Renamed to avoid confusion with expansion board GPIO routines that
will be added in the future.
2013-08-25 12:27:25 -04:00

963 lines
29 KiB
C

/**
* @file libbladeRF.h
*
* @brief bladeRF library
*/
#ifndef BLADERF_H_
#define BLADERF_H_
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#ifdef __cplusplus
extern "C" {
#endif
/** This structure is an opaque device handle */
struct bladerf;
/** This opaque structure is used to keep track of stream information */
struct bladerf_stream;
/**
* @defgroup RETCODES Error return codes
*
* bladeRF library routines return negative values to indicate errors.
* Values >= 0 are used to indicate success.
*
* @code
* int status = bladerf_set_txvga1(dev, 2);
*
* if (status < 0)
* handle_error();
* @endcode
*
* @{
*/
#define BLADERF_ERR_UNEXPECTED (-1) /**< An unexpected failure occurred */
#define BLADERF_ERR_RANGE (-2) /**< Provided parameter is out of range */
#define BLADERF_ERR_INVAL (-3) /**< Invalid operation/parameter */
#define BLADERF_ERR_MEM (-4) /**< Memory allocation error */
#define BLADERF_ERR_IO (-5) /**< File/Device I/O error */
#define BLADERF_ERR_TIMEOUT (-6) /**< Operation timed out */
#define BLADERF_ERR_NODEV (-7) /**< No device(s) available */
#define BLADERF_ERR_UNSUPPORTED (-8) /**< Operation not supported */
/** @} (End RETCODES) */
/**
* Backend by which the host communicates with the device
*/
typedef enum {
BLADERF_BACKEND_ANY, /**< "Don't Care" -- use any available backend */
BLADERF_BACKEND_LINUX, /**< Linux kernel driver */
BLADERF_BACKEND_LIBUSB /**< libusb */
} bladerf_backend;
/**
* Information about a bladeRF attached to the system
*/
struct bladerf_devinfo {
bladerf_backend backend; /**< Backend to use when connecting to device */
char serial[33]; /**< Device's serial number */
uint8_t usb_bus; /**< Bus # device is attached to */
uint8_t usb_addr; /**< Device address on bus */
unsigned int instance; /**< Device instance or ID */
};
/**
* Device statistics
*/
struct bladerf_stats {
/** The number of times samples have been lost in the FPGA */
uint64_t rx_overruns;
/** The overall throughput of the device in samples/second */
uint64_t rx_throughput;
/** Number of times samples have been too late to transmit to the FPGA */
uint64_t tx_underruns;
/** The overall throughput of the device in samples/second */
uint64_t tx_throughput;
};
/**
* Sample format
*/
typedef enum {
BLADERF_FORMAT_SC16_Q12, /**< Signed, Complex 16-bit Q12.
* This is the native format of the DAC data.
*
* Samples are interleaved IQ value pairs, where
* each value in the pair is an int16_t. For each
* value, the data in the lower bits. The upper
* bits are reserved.
*
* When using this format, note that buffers
* must be at least
* 2 * num_samples * sizeof(int16_t)
* bytes large
*/
} bladerf_format;
/**
* Sample metadata
*/
struct bladerf_metadata {
uint32_t version; /**< Metadata format version */
uint64_t timestamp; /**< TODO Time in \<unit\> since \<origin\> */
};
/**
* LNA gain options
*/
typedef enum {
BLADERF_LNA_GAIN_UNKNOWN, /**< Invalid LNA gain */
BLADERF_LNA_GAIN_BYPASS, /**< LNA bypassed - 0dB gain */
BLADERF_LNA_GAIN_MID, /**< LNA Mid Gain (MAX-6dB) */
BLADERF_LNA_GAIN_MAX /**< LNA Max Gain */
} bladerf_lna_gain;
/**
* Module selection for those which have both RX and TX constituents
*/
typedef enum
{
BLADERF_MODULE_RX, /**< Receive Module */
BLADERF_MODULE_TX /**< Transmit Module */
} bladerf_module;
/**
* Transmit Loopback options
*/
typedef enum {
BLADERF_LB_BB_LPF = 0, /**< Baseband loopback enters before RX low-pass filter input */
BLADERF_LB_BB_VGA2, /**< Baseband loopback enters before RX VGA2 input */
BLADERF_LB_BB_OP, /**< Baseband loopback enters before RX ADC input */
BLADERF_LB_RF_LNA_START, /**< Placeholder - DO NOT USE */
BLADERF_LB_RF_LNA1, /**< RF loopback enters at LNA1 (300MHz - 2.8GHz)*/
BLADERF_LB_RF_LNA2, /**< RF loopback enters at LNA2 (1.5GHz - 3.8GHz)*/
BLADERF_LB_RF_LNA3, /**< RF loopback enters at LNA3 (300MHz - 3.0GHz)*/
BLADERF_LB_NONE /**< Null loopback mode*/
} bladerf_loopback;
/**
* For both RX and TX, the stream callback receives:
* dev: Device structure
* stream: The associated stream
* metadata: TBD
* user_data: User data provided when initializing stream
*
* <br>
*
* For TX callbacks:
* samples: Pointer fo buffer of samples that was sent
* num_samples: Number of sent in last transfer and to send in next transfer
*
* Return value: The user specifies the address of the next buffer to send
*
* For RX callbacks:
* samples: Buffer filled with received data
* num_samples: Number of samples received and size of next buffers
*
* Return value: The user specifies the next buffer to fill with RX data,
* which should be num_samples in size.
*
*/
typedef void *(*bladerf_stream_cb)(struct bladerf *dev,
struct bladerf_stream *stream,
struct bladerf_metadata *meta,
void *samples,
size_t num_samples,
void *user_data);
/**
* @defgroup FN_INIT Initialization/deinitialization
*
* @{
*/
/**
* Obtain a list of bladeRF devices attached to the system
*
* @param[out] devices
*
* @return number of items in returned device list, or value from
* \ref RETCODES list on failure
*/
int bladerf_get_device_list(struct bladerf_devinfo **devices);
/**
* Free device list returned by bladerf_get_device_list()
*
* @param devices List of available devices
*/
void bladerf_free_device_list(struct bladerf_devinfo *devices);
/**
* Get the device path if a bladeRF device
*
* @param[in] dev Device handle
*
* @returns A pointer to the device path string, or NULL on error
*/
char * bladerf_dev_path(struct bladerf *dev);
/**
* Opens device specified by provided bladerf_devinfo structure
*
* @pre devinfo has been populated via a call to bladerf_get_device_list
*
* @param[out] device Update with device handle on success
* @param[in] devinfo Device specification
*
* @return 0 on success, or value from \ref RETCODES list on failure
*/
int bladerf_open_with_devinfo(struct bladerf **device,
struct bladerf_devinfo *devinfo);
/**
* Open specified device using a device identifier string
*
* The general form of the device identifier string is;
* @code
* <backend>:[device=<bus>:<addr>] [instance=<n>] [serial=<serial>]
* @endcode
*
* An empty ("") or NULL device identifier will result in the first
* encountered device being opened (using the first discovered backend)
*
* The 'backend' describes the mechanism used to communicate with the device,
* and may be one of the following:
* - libusb: libusb (See libusb changelog notes for required version, given
* your OS and controller)
* - linux: Linux Kernel Driver
*
* If no arguments are provided after the backend, the first encountered
* device on the specified backend will be opened. Note that a backend is
* required, if any arguments are to be provided.
*
* Next, any provided arguments are provide as used to find the desired device.
* Be sure not to over constrain the search. Generally, only one of the above
* is required -- providing all of these may over constrain the search for the
* desired device (e.g., if a serial number matches, but not on the specified
* bus and address.)
*
* - device=\<bus\>:\<addr\>
* - Specifies USB bus and address. Decimal or hex prefixed by '0x' is
* permitted.
* - instance=\<n\>
* - Nth instance encountered (libusb)
* - Device node N, such as /dev/bladerfN (linux)
* - serial=\<serial\>
* - Device's serial number. Decimal or hex prefixed by '0x' is permitted.
*
* @param[out] device Update with device handle on success
* @param[in] device_identifier Device identifier, formatted as described above
*
* @return 0 on success, or value from \ref RETCODES list on failure
*/
int bladerf_open(struct bladerf **device, const char *device_identifier);
/**
* Close device
*
* @note Failing to close a device may result in memory leaks.
*
* @post device is deallocated and may no longer be used.
*
* @param device Device handle previously obtained by bladerf_open()
*/
void bladerf_close(struct bladerf *device);
/** @} (End FN_INIT) */
/**
* @defgroup FN_CTRL Device control and configuration
*
* @{
*/
/**
* Enable or disable the specified RX/TX module
*
* @param dev Device handle
* @param m Device module
* @param enable true to enable, false to disable
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_enable_module(struct bladerf *dev,
bladerf_module m, bool enable);
/**
* Apply specified loopback mode
*
* @param dev Device handle
* @param l Loopback mode. Note that LB_NONE disables the use
* of loopback functionality.
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_loopback( struct bladerf *dev, bladerf_loopback l);
/**
* Configure the device's sample rate, in Hz. Note this requires the sample
* rate is an integer value of Hz. Use bladerf_set_rational_sample_rate()
* for more arbitrary values.
*
* @param[in] dev Device handle
* @param[in] module Module to change
* @param[in] rate Sample rate
* @param[out] actual Actual sample rate
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_sample_rate(struct bladerf *dev, bladerf_module module,
unsigned int rate, unsigned int *actual);
/**
* Configure the device's sample rate as a rational fraction of Hz.
* Sample rates are in the form of integer + num/denom.
* TODO: Should this be the only way we set values, and num=0 and denom=1
* for integer portions?
*
* @param[in] dev Device handle
* @param[in] module Module to change
* @param[in] integer Integer portion of the equation integer + num/denom
* @param[in] num Numerator of rational fractional part
* @param[in] denom Denominator of rational fractional part
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_rational_sample_rate(struct bladerf *dev,
bladerf_module module,
unsigned int integer, unsigned int num,
unsigned int denom);
/**
* Read the device's sample rate in Hz
*
* @param[in] dev Device handle
* @param[in] module Module to query
* @param[out] rate Pointer to returned sample rate
*
* @return 0 on success, value from \ref RETCODES list upon failure
*/
int bladerf_get_sample_rate(struct bladerf *dev, bladerf_module module,
unsigned int *rate);
/**
* Set the PA gain in dB
*
* @param dev Device handle
* @param gain Desired gain
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_txvga2(struct bladerf *dev, int gain);
/**
* Get the PA gain in dB
*
* @param dev Device handle
* @param gain Pointer to returned gain
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_txvga2(struct bladerf *dev, int *gain);
/**
* Set the post-LPF gain in dB
*
* @param dev Device handle
* @param gain Desired gain
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_txvga1(struct bladerf *dev, int gain);
/**
* Get the post-LPF gain in dB
*
* @param dev Device handle
* @param gain Pointer to returned gain
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_txvga1(struct bladerf *dev, int *gain);
/**
* Set the LNA gain
*
* @param dev Device handle
* @param gain Desired gain level
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_lna_gain(struct bladerf *dev, bladerf_lna_gain gain);
/**
* Get the LNA gain
*
* @param dev Device handle
* @param gain Pointer to the set gain level
*/
int bladerf_get_lna_gain(struct bladerf *dev, bladerf_lna_gain *gain);
/**
* Set the pre-LPF VGA gain
*
* @param dev Device handle
* @param gain Desired gain
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_rxvga1(struct bladerf *dev, int gain);
/**
* Get the pre-LPF VGA gain
*
* @param dev Device handle
* @param gain Pointer to the set gain level
*/
int bladerf_get_rxvga1(struct bladerf *dev, int *gain);
/**
* Set the post-LPF VGA gain
*
* @param dev Device handle
* @param gain Desired gain
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_rxvga2(struct bladerf *dev, int gain);
/**
* Get the post-LPF VGA gain
*
* @param dev Device handle
* @param gain Pointer to the set gain level
*/
int bladerf_get_rxvga2(struct bladerf *dev, int *gain);
/**
* Set the bandwidth to specified value in Hz
*
* @param dev Device handle
* @param module Module for bandwidth request
* @param bandwidth Desired bandwidth
* @param actual If non-NULL, written with the actual
* bandwidth that the device was able to
* achieve
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_bandwidth(struct bladerf *dev, bladerf_module module,
unsigned int bandwidth,
unsigned int *actual);
/**
* Get the bandwidth of the LMS LPF
*
* @param dev Device Handle
* @param module Module for bandwidth request
* @param bandwidth Actual bandwidth in Hz
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_bandwidth(struct bladerf *dev, bladerf_module module,
unsigned int *bandwidth);
/**
* Select the appropriate band path given a frequency in Hz.
*
* @param dev Device handle
* @param module Module to configure
* @param frequency Tuned frequency
*/
int bladerf_select_band(struct bladerf *dev, bladerf_module module,
unsigned int frequency);
/**
* Set module's frequency in Hz.
*
* @param dev Device handle
* @param module Module to configure
* @param frequency Desired frequency
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_set_frequency(struct bladerf *dev,
bladerf_module module, unsigned int frequency);
/**
* Set module's frequency in Hz
*
* @param dev Device handle
* @param module Module to configure
* @param frequency Pointer to the returned frequency
*/
int bladerf_get_frequency(struct bladerf *dev,
bladerf_module module, unsigned int *frequency);
/** @} (End of FN_CTRL) */
/**
* @defgroup FN_DATA Data transmission and reception
*
* @{
*/
/**
* Initialize a stream for use with asynchronous routines
*
* @param[out] stream Upon success, this will be updated to contain
* a stream handle (i.e., address)
*
* @param[in] dev Device to associate with the stream
*
* @param[in] callback Callback routine to handle asynchronous events
*
* @param[out] buffers This will be updated to point to a dynamically
* allocated array of buffer pointers.
*
* @param[in] num_buffers Number of buffers to allocate and return
*
* @param[in] format Sample data format
*
* @param[in] num_samples Number of samples in each buffer of samples.
* Note that the physical size of the buffer
* is a function of this and the format parameter.
*
* @param[in] num_transfers Maximum number of transfers that may be
* in-flight simultaneous. This must be <= the
* number of buffers.
*
* @param[in] user_data Caller-provided data that will be provided
* in stream callbacks
*
*
* @note This call should be later followed by a call to
* bladerf_deinit_stream() to avoid memory leaks.
*
* @return 0 on success,
* value from \ref RETCODES list on failure
*/
int bladerf_init_stream(struct bladerf_stream **stream,
struct bladerf *dev,
bladerf_stream_cb callback,
void ***buffers,
size_t num_buffers,
bladerf_format format,
size_t num_samples,
size_t num_transfers,
void *user_data);
/**
* Deinitialize and deallocate stream resources
*/
void bladerf_deinit_stream(struct bladerf_stream *stream);
/**
*
* @pre The provided bladerf_stream must have had its callback,
* samples_per_buffer, buffers_per_stream, and (optional) data fields
* initialized prior to this call
*/
int bladerf_stream(struct bladerf *dev, bladerf_module module,
bladerf_format format, struct bladerf_stream *stream);
/**
* Transmit IQ samples
*
* @param[in] dev Device handle
* @param[in] format Format of the provided samples
* @param[in] samples Array of samples
* @param[in] num_samples Number of samples to write
* @param[in] metadata Sample metadata. This parameter is currently
* unused.
*
* @note When using the libusb backend, this function will likely be too slow
* for mid to high sample rates. For anything other than slow sample
* rates, the bladerf_stream() function is better choice.
*
* @return number of samples sent on success,
* value from \ref RETCODES list on failure
*/
int bladerf_tx(struct bladerf *dev, bladerf_format format,
void *samples, int num_samples,
struct bladerf_metadata *metadata);
/**
* Receive IQ samples
*
* @param[in] dev Device handle
* @param[in] format The data format that the received data should be in.
* The caller is responsible for ensuring the provided
* sample buffer is sufficiently large.
*
* @param[out] samples Buffer to store samples in
* @param[in] num_samples Number of samples to read
* @param[out] metadata Sample metadata. This parameter is currently
* unused.
*
* @note When using the libusb backend, this function will likely be too slow
* for mid to high sample rates. For anything other than slow sample
* rates, the bladerf_stream() function is better choice.
*
*
* @return number of samples read or value from \ref RETCODES list on failure
*/
int bladerf_rx(struct bladerf *dev, bladerf_format format,
void *samples, int num_samples,
struct bladerf_metadata *metadata);
/** @} (End of FN_DATA) */
/**
* @defgroup FN_INFO Device info
*
* @{
*/
/**
* Query a device's serial number
*
* @param[in] dev Device handle
* @param[out] serial Will be updated with serial number. If an error occurs,
* no data will be written to this pointer.
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_serial(struct bladerf *dev, char *serial);
/* FIXME this routine will be changed to have an int16_t* trim paramter soon */
#if 0
/**
* Query a device's VCTCXO calibration trim
*
* @param[in] dev Device handle
* @param[out] trim Will be updated with the factory DAC trim value. If an
* error occurs, no data will be written to this pointer.
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_vctcxo_trim(struct bladerf *dev, char *trim);
#endif
/**
* Query a device's FPGA size
*
* @param[in] dev Device handle
* @param[out] size Will be updated with the onboard FPGA's size. If an
* error occurs, no data will be written to this pointer.
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_fpga_size(struct bladerf *dev, char *size);
/**
* Query firmware version
*
* @param[in] dev Device handle
* @param[out] major Firmware major version
* @param[out] minor Firmware minor version
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_fw_version(struct bladerf *dev,
unsigned int *major, unsigned int *minor);
/**
* Check FPGA configuration status
*
* @param dev Device handle
*
* @return 1 if FPGA is configured,
* 0 if it is not,
* and value from \ref RETCODES list on failure
*/
int bladerf_is_fpga_configured(struct bladerf *dev);
/**
* Query FPGA version
*
* @param[in] dev Device handle
* @param[out] major FPGA major version
* @param[out] minor FPGA minor version
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_get_fpga_version(struct bladerf *dev,
unsigned int *major, unsigned int *minor);
/**
* Obtain device statistics
*
* @param[in] dev Device handle
* @param[out] stats Current device statistics
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_stats(struct bladerf *dev, struct bladerf_stats *stats);
/** @} (End FN_INFO) */
/**
* @defgroup FN_PROG Device programming
*
* @{
*/
/**
* Flash firmware onto the device
*
* @note This will require a power cycle to take effect
*
* @param dev Device handle
* @param firmware Full path to firmware file
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_flash_firmware(struct bladerf *dev, const char *firmware);
/**
* Load device's FPGA
*
* @param dev Device handle
* @param fpga Full path to FPGA bitstream
*
* @return 0 upon successfully,
* 1 if FPGA is already loaded,
* or a value from \ref RETCODES list on failure
*/
int bladerf_load_fpga(struct bladerf *dev, const char *fpga);
/* @} (End of FN_PROG) */
/**
* @defgroup FN_MISC Miscellaneous
* @{
*/
/**
* Obtain a textual description of a value from the \ref RETCODES list
*
* @warning Do not attempt to modify the returned string.
*
* @param error Error value to look up
* @return Error string
*/
const char * bladerf_strerror(int error);
/**
* Get libbladeRF version information.
*
* The parameters are optional and may be set to NULL if not needed
*
* param[out] major Major version
* param[out] minor Minor version
* param[out] patch Patch version
*
* @warning Do not attempt to modify the returned string.
*
* @return Version string. This value will contain git information for
* non-release builds (i.e., a short changeset and "dirty" status)
*/
const char * bladerf_version(unsigned int *major,
unsigned int *minor,
unsigned int *patch);
/** @} (End of FN_MISC) */
/**
* @defgroup LOW_LEVEL Low level development and testing routines
*
* In a most cases, higher-level routines should be used. These routines are
* only intended to support development and testing. Treat these routines as
* if they may disappear in future revision of the API; do not depend on them
* for any long-term software.
*
* Use these routines with great care, and be sure to reference the relevant
* schematics, datasheets, and source code (e.g., firmware and hdl).
*
* Be careful when mixing these calls with higher-level routines that manipulate
* the same registers/settings.
*
*
* @{
*/
/**
* Read a Si5338 register
*
* @param dev Device handle
* @param address Si5338 register offset
* @param val Pointer to variable the data should be read into
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_si5338_read(struct bladerf *dev, uint8_t address, uint8_t *val);
/**
* Write a Si5338 register
*
* @param dev Device handle
* @param address Si5338 register offset
* @param val Data to write to register
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_si5338_write(struct bladerf *dev, uint8_t address, uint8_t val);
/**
* Set frequency for TX clocks
*
* @param dev Device handle
* @param freq Desired TX frequency in Hz
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_si5338_set_tx_freq(struct bladerf *dev, unsigned freq);
/**
* Set frequency for RX clocks
*
* @param dev Device handle
* @param freq Desired RX frequency in Hz
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_si5338_set_rx_freq(struct bladerf *dev, unsigned freq);
/**
* Read a LMS register
*
* @param dev Device handle
* @param address LMS register offset
* @param val Pointer to variable the data should be read into
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_lms_read(struct bladerf *dev, uint8_t address, uint8_t *val);
/**
* Write a LMS register
*
* @param dev Device handle
* @param address LMS register offset
* @param val Data to write to register
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_lms_write(struct bladerf *dev, uint8_t address, uint8_t val);
/**
* Enable LMS receive
*
* @note This bit is set/cleared by bladerf_enable_module()
*/
#define BLADERF_GPIO_LMS_RX_ENABLE (1 << 1)
/**
* Enable LMS transmit
*
* @note This bit is set/cleared by bladerf_enable_module()
*/
#define BLADERF_GPIO_LMS_TX_ENABLE (1 << 2)
/**
* Switch to use TX low band (300MHz - 1.5GHz)
*
* @note This is set using bladerf_set_frequency().
*/
#define BLADERF_GPIO_TX_LB_ENABLE (2 << 3)
/**
* Switch to use TX high band (1.5GHz - 3.8GHz)
*
* @note This is set using bladerf_set_frequency().
*/
#define BLADERF_GPIO_TX_HB_ENABLE (1 << 3)
/**
* Switch to use RX low band (300M - 1.5GHz)
*
* @note THis is set using bladerf_set_frequency().
*/
#define BLADERF_GPIO_RX_LB_ENABLE (2 << 5)
/**
* Switch to use RX high band (1.5GHz - 3.8GHz)
*
* @note This is set using bladerf_set_frequency().
*/
#define BLADERF_GPIO_RX_HB_ENABLE (1 << 5)
/**
* This GPIO bit configures the FPGA to use smaller DMA
* transfers (256 cycles instead of 512). This is required
* when the device is not connected at Super Speed (i.e., when
* it is connected at High Speed).
*
* However, the caller need not set this in gpio_set() calls.
* The library will set this as needed; callers generally
* do not need to be concerned with setting/clearing this bit.
*/
#define BLADERF_GPIO_FEATURE_SMALL_DMA_XFER (1 << 7)
/**
* Read a configuration GPIO register
*
* @param dev Device handle
* @param val Pointer to variable the data should be read into
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_config_gpio_read(struct bladerf *dev, uint32_t *val);
/**
* Write a configuration GPIO register. Callers should be sure to perform a
* read-modify-write sequence to avoid accidentally clearing other
* GPIO bits that may be set by the library internally.
*
* @param dev Device handle
* @param val Data to write to GPIO register
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_config_gpio_write(struct bladerf *dev, uint32_t val);
/**
* Write value to VCTCXO DAC
*
* @param dev Device handle
* @param val Data to write to DAC register
*
* @return 0 on success, value from \ref RETCODES list on failure
*/
int bladerf_dac_write(struct bladerf *dev, uint16_t val);
/* @} (End of LOW_LEVEL) */
#ifdef __cplusplus
}
#endif
#endif /* BLADERF_H_ */