16 lines
1,011 B
Markdown
16 lines
1,011 B
Markdown
# GNU Radio Companion Loopback Example #
|
|
|
|
This flowgraph illustrates the use of the `loopback=<mode>` parameter that may
|
|
be provided to an `osmocom Source` block to internally connect a bladeRF's TX
|
|
signal path to its RX path.
|
|
|
|
This is intended to allow users to experiment with the effect of various
|
|
parameters for different loopback modes. For example, The TX VGA1 gain has
|
|
no effect when a loopback mode that selects the output of the TXLPF is
|
|
selected. It is *highly* recommended that users refer to the LMS6002D block
|
|
diagram in the [LMS6002D data sheet](http://www.limemicro.com/products/field-programmable-rf-ics-lms6002d/#resources)
|
|
to better understand the available loopback paths.
|
|
|
|
The available loopback mode settings are listed on the [gr-osmosdr wiki page](http://sdr.osmocom.org/trac/wiki/GrOsmoSDR#bladeRFSourceSink).
|
|
One may also reference the descriptions of the associated `bladerf_loopback`
|
|
enumeration values in the [libbladeRF API documentation](https://nuand.com/bladeRF-doc/libbladeRF).
|