bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak d3bc3dc27f host: examples: bladeRF-cli: Added sync_trx example
This example demonstrates how to use the bladeRF-cli to perform
synchronized sampling using two devices and a trigger signal on
J71-4.
2016-05-22 19:20:27 -04:00
debian debian: check for valid bitstream download 2016-02-13 12:38:32 -05:00
doc doc/packaging.md: Fix minor typo 2015-01-29 17:23:11 -05:00
firmware_common firmware_common: Updated VID/PID with USB-IF registered VID 2016-04-06 17:36:01 -04:00
fpga_common fpga_common: Added 8x8 packet IDs RX & TX trigger control packets 2016-05-08 23:17:05 -04:00
fx3_firmware fx3_firmware: Added missing dependency to .elf->.img target 2016-04-07 18:39:05 -04:00
hdl nios: Incremented FPGA version to v0.6.0 2016-05-16 23:49:49 -04:00
host host: examples: bladeRF-cli: Added sync_trx example 2016-05-22 19:20:27 -04:00
legal matlab: Added MATLAB libbladeRF bindings 2015-11-23 17:55:36 -05:00
.gitignore gitignore: Added modelsim compiled libraries, transcripts, and waveforms 2015-12-14 15:29:58 -05:00
CHANGELOG bladeRF 2016.01-rc1 release 2016-01-07 17:04:10 -05:00
CMakeLists.txt fx3_firmware: Use CMake for project configuration and Makefile generation 2016-04-06 16:06:06 -04:00
CONTRIBUTORS Updated CONTRIBUTORS file 2016-02-14 16:24:15 -05:00
COPYING COPYING: Touched up the text and specifically referenced items 2014-10-31 10:50:31 -04:00
README.md Update CMake options in READMEs (#285) 2014-07-27 13:32:49 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port.
  6. You should now be able to see your device in the list output via bladeRF-cli -p
  7. You can view additional information about the device via bladeRF-cli -e info -e version.
  8. If any warnings indicate that a firmware update is needed, run:bladeRF-cli -f <firmware_file>.
  • If you ever find the device booting into the FX3 bootloader (e.g., if you unplug the device in the middle of a firmware upgrade), see the recovery command in bladeRF-cli for additional details.
  1. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki.

Build Variables

Below are global options to choose which parts of the bladeRF project should be built from the top level. Please see the fx3_firmware and host subdirectories for more specific options.

Option Description
-DENABLE_FX3_BUILD=<ON/OFF> Enables building the FX3 firmware. Default: OFF
-DENABLE_HOST_BUILD=<ON/OFF> Enables building the host library and utilities overall. Default: ON