Compare commits

...
Sign in to create a new pull request.

35 commits

Author SHA1 Message Date
David Rodriguez
a6f69bd7ca 1) Revsion changed to 7A. Where the letter is used for minor revisoins
2) Changes to head_data_proc.vhd to implement proper clocking of data. The data is not DDR. It gets registered on falling edge
3) The EPROM block is the EPSON. It is left there to be changed for an standard EPROM
2024-09-13 16:09:28 +01:00
David Rodriguez
bfe6acaaac 1) Implemation of latch_count and signature. There was a problem with head_data_proc.vhd because it did not have acrl
2) tb has been modified to test the data. Printdata s coming from core
3) VUserMain0.cpp modified
2024-08-30 18:14:15 +01:00
David Rodriguez
88f08392d2 1) This version has the top level modifies with the printhead signals
2) Tb.pkg has been modified
3) head_data_proc.vhd has been modified but not simulated to test signature and latch count
4) pei_fpga_top.vhd must be cleaned. It has code from d3000 that is not required
5) head_datain has been added to account for the ddr printhead data.
2024-08-27 17:39:20 +01:00
David Rodriguez
81a4182c87 1) This commit does not run. It has the head_proc modified 2024-08-26 14:44:44 +01:00
David Rodriguez
1449b2a699 1) added pin data file
2) modified mcp4631 to accept i2c_address
3) runtest moified with right i2c addres for the mcp4631 test bench
2024-08-24 21:21:12 +01:00
David Rodriguez
375512a5d5 Working on generic i2cfpga implementation. This version can talk to mcp4631 and stm8. It has some extra registers to send i2c device address and number of byte during a write. Read transactions are fixed to two bytes. This version simulate and does not require a delay to reach the end of the transaction. The mcp4631_tb does report the read of the register. Howver, it has been used as an end-point to exercise the simulation. 2024-08-21 09:16:52 +01:00
David Rodriguez
f688331a20 1) added ADRR_STM8_W_NBYTES (#14) and wr_nbytes register to change the fram legnth of i2c master event
2) runTest.cpp added w0e to change register value from 1 (default) to 14 in hex
2024-08-16 21:26:51 +01:00
David Rodriguez
af4415ebe3 1) included mcp4631.vhd and mcp4631_tb.vhd
2)simple_i2c_masterPEI.v included. This version solved the problem of the second byte during a read to hold the sda line to zero
3)this version has the simple_i2c_slave_emprom of d3000. It has to be modified to have a proper Eprom
4) test.json modified to include the pei register and the i2c peripherals
5) testbench files modified: runTest.h;runTestLocal.h; VUserMain0.cpp; and runTest.cpp
2024-08-15 20:10:27 +01:00
David Rodriguez
3cb482d856 1) Added pei-se-d3000 V6 to pei-sd-sg1024 2024-03-27 11:22:39 +00:00
David Steele
2115d9b5e0 HMBFDHV-1007. Simulates now 2024-03-14 16:43:18 +00:00
David Steele
7f9708d22a Update to latest EL GIP 2024-03-14 14:32:14 +00:00
David Steele
6a02e8f52a HMBFDHV-1002. Add debug_wr_if so JB can get software building. (Debug_wr_if does not work in this version - everything else does) 2024-03-14 14:27:53 +00:00
David Steele
9306eb9492 HMBFDHV-1004. Fix timing 2024-03-14 10:39:34 +00:00
David Steele
2d5b5b53af HMBFDHV-1004. Make clear bits work per head 2024-03-14 09:09:09 +00:00
David Steele
e8aeee478e HMBFDHV-1004. Add counters to detect if printing non zero 2024-03-13 16:11:46 +00:00
David Steele
198801a123 HMBFDHV-1002. Change debug outputs to be useful. Also added hmb_fpga to test bench (no functional change) 2024-03-11 13:28:09 +00:00
David Steele
72f101ce49 HMBFDHV-985. Make shutdown signal turn off the head heaters 2024-02-29 16:59:04 +00:00
David Steele
7732464c0b Merge branch '0.9.8' of hydra.corp.globalinkjetsystems.com:GIS_Embedded_Logic/hmb-fd-sg1024 into 0.9.8 2024-02-28 17:08:44 +00:00
David Steele
5a90ab930d No Functional Change. Make comments clearer 2024-02-28 17:08:27 +00:00
David Steele
371b3e9b35 HMBFDHV-973. Add test to check Print Unit CSR registers read back correctly 2024-02-21 14:11:51 +00:00
David Steele
b6c81139a0 HMBFDHV-973. Make print unit registers read properly 2024-02-21 13:52:57 +00:00
David Steele
855dd6063a Fix hold timing 2024-01-31 15:23:39 +00:00
David Steele
defe456d26 Fix hold timing 2024-01-31 15:23:23 +00:00
David Steele
fcebf9e37e Try a different seed as 0.049 ns off timing 2024-01-31 14:45:24 +00:00
David Steele
26d5c96119 HMBFDHV-977. Add support for BA4 with inline merge disabled. Chip fits and tests pass 2024-01-31 12:02:02 +00:00
David Steele
4833f56398 HMBFDHV-977. All tests pass 2024-01-31 11:37:13 +00:00
David Steele
e526e62dc6 HMBFDHV-977. Fix multi_heads_test (allow print_data_width through to pixel buffer). Remove unused signals. Add Scratch debug reg 2024-01-31 11:27:54 +00:00
David Steele
cde8ca2d9d HMBFDHV-977. Data core and print streamer tests pass 2024-01-30 13:22:35 +00:00
David Steele
a1094be237 HMBFDHV-977. Update to latest EL GIP 2024-01-29 16:41:26 +00:00
David Steele
21e396ffb3 HMBFDHV-977. Compiles. Passes Avalon Bus test 2024-01-29 16:35:54 +00:00
David Steele
5583da6e21 HMBFDHV-977. Starting to compile 2024-01-26 16:45:47 +00:00
David Steele
c62ec3649a HMBFDHV-977. Update after mega merge 2024-01-26 13:39:10 +00:00
David Steele
45ab8e5cef HMBFDHV-973. Enable BA4 for 2G RAM 2024-01-18 13:38:53 +00:00
David Steele
920bb7a495 HMBFDHV-973. Update SG1024 0.9.6 to 2GB RAM ability 2024-01-02 13:43:34 +00:00
David Steele
99d36dcacb HMBFDHV-878 HMBFDHV-879 HMBFDHV-880. Add SOM I2C control and status. Swap incorrect SOM and APP labels in vhdl. Change HMB fpga to autogenerated registers
*** Note has to move the base address of the head monitors
So - Old H0 - 0x40, 0x50, 0x60, H3 - 0x70
     New H0 - 0x20, 0x40, 0x60, H3 - 0x80
2022-11-25 14:26:22 +00:00
137 changed files with 74998 additions and 20321 deletions

View file

@ -10,23 +10,23 @@ script {
// Main Software
if (isUnix()) {
env.ALTERA_REPO = "git@hydra:gis/altera_18_1_linux.git"
env.ALTERA_BRANCH = "origin/master"
env.ALTERA_BRANCH = "origin/master"
}
else {
env.ALTERA_REPO = "git@hydra:gis/altera_18_1.git"
env.ALTERA_BRANCH = "origin/master"
}
}
env.QSYS_PKG_VER = "18.1"
// Tools (tag on master)
env.FW_DEV_TOOL_BRANCH = "refs/tags/ELGIP_2021_06_24_A_DHLS"
// Generic IP
env.GENERIC_IP_BRANCH = "refs/tags/ELGIP_2021_08_25_A_DHLS"
env.FW_DEV_TOOL_BRANCH = "origin/master"
// Generic IP
env.GENERIC_IP_BRANCH = "origin/master"
// MinGW
env.MINGW_REPO = "git@hydra:GIS_Embedded_Logic/mingw.git"
env.MINGW_BRANCH = "origin/master"
// force extra rules for checking to permit critical warnings
env.USE_EXTRA_EXPRESSIONS="false"
// Shared Code
}

View file

@ -15,6 +15,7 @@
--! @b Interfaces:
--! @li Avalon MM master avm_rx_* : Avalon bus interface to memory system
--! @li pixel_buf_wr_* : Pixel buffer write port
--! @li en_dual_data_path : Enable inline merge dual path (if configured for dual path)
--! @li chan_en : print channel enable input
--! @li bpp_mode : bits per pixel mode input from CPU
--! @li print_data_width : Print data width (GMA9905300 is 18 bits wide. GMA3305300 is 6 bits wide)
@ -49,79 +50,115 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.common_pkg.all;
use work.pixel_buffer_2_pkg.all;
entity data_core is
generic(
MAX_BPP : integer := 3;
SHIFT_DEPTH : integer range 1 to 1024 := 128;
MAX_OP_WIDTH : natural range 1 to 48 := 48;
DELAY_WIDTH : integer := 10
MAX_BPP : integer := 3;
SHIFT_DEPTH : integer range 1 to 1024 := 128;
MAX_OP_WIDTH : natural range 1 to 48 := 48;
DELAY_WIDTH : integer := 10;
EN_PEEK : boolean := false;
NO_ZERO_GAP : boolean := false;
NUM_CHANS : integer range 1 to 4 := 2 -- number of PD inline-merge channels
);
port(
clk : in std_logic;
rst_n : in std_logic;
clk : in std_logic;
rst_n : in std_logic;
pixel_buf_wr : in std_logic;
pixel_buf_wr_data : in std_logic_vector(31 downto 0);
pixel_buf_rdy : out std_logic;
pixel_buf_wr : in std_logic;
pixel_buf_wr_data : in std_logic_vector(31 downto 0);
pixel_buf_rdy : out std_logic;
pixel_buf_last_word : in std_logic;
chan_en : in std_logic;
bpp_mode : in std_logic_vector(1 downto 0);
print_data_width : in std_logic_vector(5 downto 0);
clear_buffer : in std_logic;
fire_req : in std_logic;
sequencers_busy : out std_logic;
fp_holdoff_update : in std_logic;
wave_seq_len : in std_logic_vector(15 downto 0);
pixel_buf_wr_aux : in std_logic;
pixel_buf_wr_data_aux : in std_logic_vector(31 downto 0);
pixel_buf_rdy_aux : out std_logic;
pixel_buf_last_word_aux : in std_logic;
en_dual_data_path : in std_logic;
chan_en : in std_logic;
bpp_mode : in std_logic_vector( 1 downto 0);
print_data_width : in std_logic_vector( 5 downto 0);
clear_buffer : in std_logic;
fire_req : in std_logic;
fire_req_start_merge : in std_logic;
drop_stripe : in std_logic;
sequencers_busy : out std_logic;
px_buf_ch_nactive : out std_logic_vector(NUM_CHANS-1 downto 0);
fp_holdoff_update : in std_logic;
seq_data_config : in std_logic_vector(15 downto 0);
seq_gl_map : in std_logic_vector(7 downto 0);
seq_gl_map_update : in std_logic;
cpu_gl_map : in std_logic_vector(7 downto 0);
cpu_gl_map_en : in std_logic;
seq_gl_map : in std_logic_vector(7 downto 0);
seq_gl_map_update : in std_logic;
cpu_gl_map : in std_logic_vector(7 downto 0);
cpu_gl_map_en : in std_logic;
empty : out std_logic;
full : out std_logic;
overrun : out std_logic;
underrun : out std_logic;
dbl_drop : out std_logic;
fp_drop : out std_logic;
overlap_error : out std_logic;
empty : out std_logic;
full : out std_logic;
overrun : out std_logic;
underrun : out std_logic;
dbl_drop : out std_logic;
fp_drop : out std_logic;
seq_start_req : in std_logic;
seq_start_first_pulse : in std_logic;
seq_start_last_pulse : in std_logic;
seq_start_req : in std_logic;
seq_start_first_pulse : in std_logic;
seq_start_last_pulse : in std_logic;
seq_start_delay : in std_logic_vector(DELAY_WIDTH - 1 downto 0);
all_on : in std_logic;
print_data : out std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
print_clk : out std_logic_vector(0 downto 0);
print_data : out std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
print_clk : out std_logic_vector(0 downto 0);
diag_word_count : out std_logic_vector(6 downto 0)
);
diag_peek_sel : in std_logic;
diag_peek_addr : in std_logic_vector(31 downto 0);
diag_peek_data : out std_logic_vector(31 downto 0);
diag_peek_rdptr : out std_logic_vector( 7 downto 0);
diag_peek_wrptr : out std_logic_vector( 7 downto 0);
diag_peek_wdata : in std_logic_vector(31 downto 0);
diag_peek_wr : in std_logic;
diag_fire_req_count : out data_array_t(1 downto 0)(31 downto 0);
diag_fire_simg_count : out data_array_t(1 downto 0)(31 downto 0);
diag_last_stripe_count : out data_array_t(1 downto 0)(31 downto 0);
diag_word_count : out std_logic_vector( 6 downto 0)
);
end entity data_core;
architecture rtl of data_core is
signal reg_GL_map_int : std_logic_vector(7 downto 0);
signal pixel_buf_rd_data : std_logic_vector(MAX_OP_WIDTH * 33 - 1 downto 0);
signal pixel_buf_rd : std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
signal gl_remap_in_data : std_logic_vector(MAX_BPP * MAX_OP_WIDTH - 1 downto 0);
signal gl_remap_valid : std_logic;
signal gl_remap_valid_int : std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
signal gl_remap_ready : std_logic;
constant SHIFT_DEPTH_INCL_PAD : integer := ((SHIFT_DEPTH+31)/32)*32; -- Round up so even 1Bpp is an integer number of DWords
constant PIXEL_DEPTH : integer := 2**log2(4*4*SHIFT_DEPTH_INCL_PAD/32); -- 4 stripes @ 4Bpp rounded up to a power of 2
constant RSVD_DEPTH : integer := 2**log2(1*4*SHIFT_DEPTH_INCL_PAD/32)+1; -- Reserve at least a full stripe's worth of space.
-- Add one to stop sims complaining when pointer goes one off the end
signal seq_gl_map_int : std_logic_vector(7 downto 0);
signal seq_start_pulse_vec : std_logic_vector(1 downto 0);
signal pixel_buf_rd_data : std_logic_vector(MAX_OP_WIDTH * 32 - 1 downto 0);
signal pixel_buf_rd : std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
signal pixel_buf_rd_valid : std_logic_vector(MAX_OP_WIDTH-1 downto 0);
signal bpp_mode_int : std_logic_vector(1 downto 0);
signal reg_GL_map_int : std_logic_vector(7 downto 0);
signal gl_remap_in_data : std_logic_vector(MAX_BPP * MAX_OP_WIDTH - 1 downto 0);
signal gl_remap_valid : std_logic;
signal gl_remap_valid_int : std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
signal gl_remap_ready : std_logic;
signal chan_en_int : std_logic;
signal seq_gl_map_int : std_logic_vector(7 downto 0);
signal seq_start_pulse_vec : std_logic_vector(1 downto 0);
signal pixel_buf_wr_int : std_logic;
signal pixel_buf_wr_data_int : std_logic_vector(31 downto 0);
signal pixel_buf_rdy_int : std_logic;
signal bpp_mode_int : std_logic_vector(1 downto 0);
signal chan_en_int : std_logic;
signal pixel_buf_wr_int : std_logic_vector(1 downto 0);
signal pixel_buf_wr_data_int : data_array_t(1 downto 0)(31 downto 0);
signal pixel_buf_rdy_int : std_logic_vector(1 downto 0);
signal pixel_buf_last_word_int : std_logic_vector(1 downto 0);
signal diag_peek_data_int : std_logic_vector(31 downto 0);
begin
-------------------------------------------------
@ -131,85 +168,120 @@ begin
process(rst_n, clk) is
begin
if rst_n = '0' then
seq_gl_map_int <= (others => '0');
elsif clk'event and clk = '1' then
if seq_gl_map_update = '1' and seq_start_req = '1' then
seq_gl_map_int <= seq_gl_map;
end if;
end if;
if rst_n = '0' then
seq_gl_map_int <= (others => '0');
elsif clk'event and clk = '1' then
if seq_gl_map_update = '1' and seq_start_req = '1' then
seq_gl_map_int <= seq_gl_map;
end if;
end if;
end process;
-------------------------------------------------
-- The pixel buffer
-------------------------------------------------
preslicer_inst : entity work.preslicer_0
generic map(
NUM_STRIPES_DEPTH => 4,
NUM_STRIPES_FULL_MARGIN => 2,
SHIFT_DEPTH => SHIFT_DEPTH,
MAX_OP_WIDTH => MAX_OP_WIDTH
)
port map
preslicer_inst_dual : entity work.preslicer_dual
generic map (
NUM_STRIPES_DEPTH => 6,
NUM_STRIPES_FULL_MARGIN => 2,
SHIFT_DEPTH => SHIFT_DEPTH_INCL_PAD,
MAX_OP_WIDTH => MAX_OP_WIDTH,
NO_ZERO_GAP => NO_ZERO_GAP
)
port map
(
clk => clk,
rst_n => rst_n,
bpp_mode => bpp_mode,
clear_buffer => clear_buffer,
ps_buf_wr => pixel_buf_wr,
ps_buf_wr_data => pixel_buf_wr_data,
ps_buf_rdy => pixel_buf_rdy,
ps_buf_last_word => '0',
-- Output data
pixel_buf_wr => pixel_buf_wr_int,
pixel_buf_wr_data => pixel_buf_wr_data_int,
pixel_buf_rdy => pixel_buf_rdy_int,
pixel_buf_last_word => open,
ip_id_ip_number => open,
ip_id_mfr_number => open,
ip_ver_minor_number => open,
ip_ver_major_number => open
clk => clk,
rst_n => rst_n,
);
bpp_mode => bpp_mode,
pixel_buffer_inst : entity work.pixel_buffer_0
generic map(
MAX_OP_WIDTH => MAX_OP_WIDTH
)
port map
clear_buffer => clear_buffer,
ps_buf_wr => pixel_buf_wr,
ps_buf_wr_data => pixel_buf_wr_data,
ps_buf_rdy => pixel_buf_rdy,
ps_buf_last_word => pixel_buf_last_word,
ps_buf_wr_aux => pixel_buf_wr_aux,
ps_buf_wr_data_aux => pixel_buf_wr_data_aux,
ps_buf_rdy_aux => pixel_buf_rdy_aux,
ps_buf_last_word_aux => pixel_buf_last_word_aux,
-- Output data
pixel_buf_wr => pixel_buf_wr_int(0),
pixel_buf_wr_aux => pixel_buf_wr_int(1),
pixel_buf_wr_data => pixel_buf_wr_data_int(0),
pixel_buf_wr_data_aux => pixel_buf_wr_data_int(1),
pixel_buf_rdy => pixel_buf_rdy_int,
pixel_buf_last_word => pixel_buf_last_word_int
);
pixel_buffer_zg_inst : entity work.pixel_buffer_zero_gap_2
generic map (
MAX_OP_WIDTH => MAX_OP_WIDTH,
SHIFT_DEPTH => SHIFT_DEPTH_INCL_PAD,
PX_DEPTH => PIXEL_DEPTH,
RSVD_DEPTH => RSVD_DEPTH,
NUM_CHANS => NUM_CHANS,
NO_ZERO_GAP => NO_ZERO_GAP,
EN_PEEK => EN_PEEK
)
port map
(
clk => clk,
rst_n => rst_n,
pixel_buf_rdy => pixel_buf_rdy_int,
last_word => '0',
data => pixel_buf_wr_data_int,
wrreq => pixel_buf_wr_int,
rdreq => pixel_buf_rd(0),
q => pixel_buf_rd_data,
empty => empty,
full => full,
overrun => overrun,
underrun => underrun,
dbl_drop => dbl_drop,
fp_drop => fp_drop,
-- bpp_mode => 2x"3",
print_data_width => print_data_width,
clear_buffer => clear_buffer,
start_req => seq_start_req,
start_req_first => seq_start_first_pulse,
start_req_last => seq_start_last_pulse,
is_last_wave => open,
fire_req => fire_req,
sequencers_busy => sequencers_busy,
fp_holdoff_update => fp_holdoff_update,
wave_seq_len => wave_seq_len,
ip_id_ip_number => open,
ip_id_mfr_number => open,
ip_ver_minor_number => open,
ip_ver_major_number => open,
diag_word_count => diag_word_count
);
clk => clk,
rst_n => rst_n,
en_dual_data_path => en_dual_data_path,
print_data_width => print_data_width,
clear_buffer => clear_buffer,
start_req(0) => seq_start_req,
seq_1st_start_req => seq_start_req, -- Only used for SUB_HEADS
start_req_first => seq_start_first_pulse,
start_req_last => seq_start_last_pulse,
fire_req => fire_req,
fire_req_start_merge => fire_req_start_merge,
drop_stripe => drop_stripe,
sequencers_busy => sequencers_busy,
px_buf_ch_nactive => px_buf_ch_nactive,
fp_holdoff_update => fp_holdoff_update,
wave_seq_len => seq_data_config,
dbl_drop => dbl_drop,
fp_drop => fp_drop,
overlap_error => overlap_error,
last_word => pixel_buf_last_word_int,
data => pixel_buf_wr_data_int,
wrreq => pixel_buf_wr_int,
pixel_buf_rdy => pixel_buf_rdy_int,
rdreq => pixel_buf_rd(0),
rdreq_rdy => pixel_buf_rd_valid(0),
q => pixel_buf_rd_data,
empty => empty,
full => full,
underrun => underrun,
overrun => overrun,
all_on => all_on,
diag_peek_sel => diag_peek_sel,
diag_peek_addr => diag_peek_addr,
diag_peek_data => diag_peek_data_int,
diag_peek_rdptr => diag_peek_rdptr,
diag_peek_wrptr => diag_peek_wrptr,
diag_peek_wdata => diag_peek_wdata,
diag_peek_wr => diag_peek_wr,
diag_fire_req_count => diag_fire_req_count,
diag_fire_simg_count => diag_fire_simg_count,
diag_last_stripe_count => diag_last_stripe_count,
diag_word_count => diag_word_count
);
-------------------------------------------------
-- The set of slicers, connected to the read
@ -221,26 +293,26 @@ begin
GEN_SLICE : for i in 0 to MAX_OP_WIDTH - 1 generate
slicer_inst : entity work.slicer
generic map(
MAX_BPP => MAX_BPP,
MAX_OP_WIDTH => MAX_OP_WIDTH
)
port map(
clk => clk,
rst_n => rst_n,
slicer_inst : entity work.slicer
generic map(
MAX_BPP => MAX_BPP,
MAX_OP_WIDTH => MAX_OP_WIDTH
)
port map(
clk => clk,
rst_n => rst_n,
pixel_buf_rd => pixel_buf_rd(i),
pixel_buf_rd_data => pixel_buf_rd_data((i + 1) * 33 - 2 downto i * 33),
pixel_buf_rd => pixel_buf_rd(i),
pixel_buf_rd_data => pixel_buf_rd_data((i + 1) * 32 - 1 downto i * 32),
bpp_mode => 2x"3",
chan_en => chan_en_int,
start_req => seq_start_req,
bpp_mode => 2x"3",
chan_en => chan_en_int,
start_req => seq_start_req,
gl_remap_in_data => gl_remap_in_data(i * 3 + 2 downto i * 3),
gl_remap_valid => gl_remap_valid_int(i),
gl_remap_ready => gl_remap_ready
);
gl_remap_in_data => gl_remap_in_data(i * 3 + 2 downto i * 3),
gl_remap_valid => gl_remap_valid_int(i),
gl_remap_ready => gl_remap_ready
);
end generate GEN_SLICE;
@ -255,22 +327,22 @@ begin
reg_GL_map_int <= cpu_gl_map when cpu_gl_map_en = '1' else seq_gl_map_int;
gl_remap_inst : entity work.gl_remap
generic map(
MAX_OP_WIDTH => MAX_OP_WIDTH
)
port map(
clk => clk,
rst_n => rst_n,
generic map(
MAX_OP_WIDTH => MAX_OP_WIDTH
)
port map(
clk => clk,
rst_n => rst_n,
reg_GL_map => reg_GL_map_int,
reg_GL_map => reg_GL_map_int,
in_valid => gl_remap_valid,
in_data => gl_remap_in_data,
in_ready => gl_remap_ready,
in_valid => gl_remap_valid,
in_data => gl_remap_in_data,
in_ready => gl_remap_ready,
out_data_head => print_data,
out_clk_head => print_clk
);
out_data_head => print_data,
out_clk_head => print_clk
);
end rtl;
end rtl;

View file

@ -0,0 +1,236 @@
-----------------------------------------------------------------------------
--! @file
--! @brief SOM FPGA preslicer
--!
--! @details This block is the the data core preslicer. Its purpose is to convert
--! variable BPP data into a fixed width stream before sending towards the pixel
--! buffer. It uses a FIFo to buffer print streamer data, flagging when to halt
--! data at half full, to allow for any inflight memory requests. This replaces
--! most of the functionality of the slicers (post pixel buffer), which are fixed
--! at 3/4 BPP. See
--! https://confluence.gisapps.co.uk/pages/viewpage.action?spaceKey=GMAHMB&title=HMB-FD-GMA+Design+Documentation
--!
--! @b Clock/resets:
--! @li clk : nominally 100MHz
--! @li rst_n : active low reset for clk (asynchronous assert)
--!
--! @b Interfaces:
--! @li bpp_mode : the current bits-per-pixel mode (1, 2 or 3---same as 4BPP)
--! @li clear_buffer : Pixel buffer clear pulse input
--! @li ps_buf_wr_data : print streamer data input
--! @li ps_buf_wr : Write strobe input for print streamer data
--! @li ps_buf_rdy : Ready output towards print streamer
--! @li ps_buf_last_word : input to flag last word of a image's stripes
--! @li pixel_buf_wr_data : pixel buffer data data output
--! @li pixel_buf_wr : Write strobe output to pixel buffer
--! @li pixel_buf_rdy : Ready input from pixel buffer
--! @li pixel_buf_last_word : Output flagging last word of an image's stripes
--! @li ip_id_ip_number : Module's ID number
--! @li ip_id_mfr_number : Module's manufacture number
--! @li ip_ver_minor_number : Module's Minor version number
--! @li ip_ver_major_number : Module's Major version number
--!
--! @b Clock-crossing considerations:
--! @li Module is a single clock domain synchronous block
--!
--! @b Language build standard requirements:
--! @li VHDL 2008
--!
--! @author Simon Southwell
--! @copyright (c) 2019 Global Inkjet Systems
--! @date 2019-05-02
-------------------------------------------------------------------------------
-- altera vhdl_input_version vhdl_2008
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use work.common_pkg.all;
entity preslicer is
generic(
NUM_STRIPES_DEPTH : integer range 2 to 32 := 8; -- whole 1bpp equivalent stripes must it be possible to buffer in preslicer
NUM_STRIPES_FULL_MARGIN : integer range 1 to 31 := 2; -- at least this many 1bpp equivalent stripes space must be available
SHIFT_DEPTH : integer range 1 to 2048 := 128; -- head shift buffer depth
MAX_OP_WIDTH : natural range 1 to 128 := 8;
DEVICE_FAMILY : string := "Cyclone V" -- "Cyclone 10 LP"
);
port
(
clk : in std_logic;
rst_n : in std_logic;
bpp_mode : in std_logic_vector(1 downto 0);
clear_buffer : in std_logic;
-- Interface to print streamer
ps_buf_wr : in std_logic;
ps_buf_wr_data : in std_logic_vector(31 downto 0);
ps_buf_rdy : out std_logic;
ps_buf_last_word : in std_logic;
-- Output data
pixel_buf_wr : out std_logic;
pixel_buf_wr_data : out std_logic_vector(31 downto 0);
pixel_buf_rdy : in std_logic;
pixel_buf_last_word : out std_logic;
ip_id_ip_number : out std_logic_vector(7 downto 0) := 8x"1d";
ip_id_mfr_number : out std_logic_vector(7 downto 0) := 8x"00";
ip_ver_minor_number : out std_logic_vector(7 downto 0) := 8x"03";
ip_ver_major_number : out std_logic_vector(7 downto 0) := 8x"00"
);
end preslicer;
architecture rtl of preslicer is
type ps_array_t is array (natural range <>) of std_logic_vector;
constant DWORD_BITS : integer := 32;
constant STRIPE_SIZE : integer := ((SHIFT_DEPTH * MAX_OP_WIDTH) / DWORD_BITS);
constant DEPTH : natural range 1 to 8182 := STRIPE_SIZE * NUM_STRIPES_DEPTH; -- in 32bit words (+ 1 bit flag)
constant ALMOST_FULL_THRESH : natural range 1 to 2048 := STRIPE_SIZE * (NUM_STRIPES_DEPTH - NUM_STRIPES_FULL_MARGIN);
signal rdreq : std_logic;
signal word_num : ps_array_t(0 to 0)(1 downto 0);
signal empty : std_logic;
signal almost_full : std_logic;
signal q : std_logic_vector(32 downto 0);
signal bpp1_slice : ps_array_t(0 to 3)(32 downto 0);
signal bpp2_slice : ps_array_t(0 to 1)(32 downto 0);
signal bpp3_slice : ps_array_t(0 to 0)(32 downto 0);
signal read_phase : std_logic;
signal pixel_buf_wr_data_int : std_logic_vector(32 downto 0);
signal ps_buf_wr_data_int : std_logic_vector(32 downto 0);
signal ps_buf_wr_int : std_logic;
signal pixel_buf_rdy_int : std_logic;
begin
-- pragma translate_off
assert NUM_STRIPES_DEPTH > NUM_STRIPES_FULL_MARGIN report "NUM_STRIPES_FULL_MARGIN must be < NUM_STRIPES_DEPTH" severity failure;
-- pragma translate_on
ps_buf_wr_data_int <= ps_buf_last_word & ps_buf_wr_data;
ps_buf_wr_int <= ps_buf_wr;
pixel_buf_rdy_int <= pixel_buf_rdy;
-- Pull out the bits from the shift register for the 3 BPP mode
bpp3_slice(0) <= q;
-- @formatter:off
-- Pull out the bits from the shift register for the 2BPP mode
bpp2_slice(1) <= q(32) &
"00" & q(31 downto 30) & "00" & q(29 downto 28) &
"00" & q(27 downto 26) & "00" & q(25 downto 24) &
"00" & q(23 downto 22) & "00" & q(21 downto 20) &
"00" & q(19 downto 18) & "00" & q(17 downto 16);
bpp2_slice(0) <= "000" & q(15 downto 14) & "00" & q(13 downto 12) &
"00" & q(11 downto 10) & "00" & q( 9 downto 8) &
"00" & q( 7 downto 6) & "00" & q( 5 downto 4) &
"00" & q( 3 downto 2) & "00" & q( 1 downto 0);
-- Pull out the bits from the shift register for the 3BPP mode
bpp1_slice(3) <= q(32) &
"000" & q(31) & "000" & q(30) & "000" & q(29) & "000" & q(28) &
"000" & q(27) & "000" & q(26) & "000" & q(25) & "000" & q(24);
bpp1_slice(2) <= "0000" & q(23) & "000" & q(22) & "000" & q(21) & "000" & q(20) &
"000" & q(19) & "000" & q(18) & "000" & q(17) & "000" & q(16);
bpp1_slice(1) <= "0000" & q(15) & "000" & q(14) & "000" & q(13) & "000" & q(12) &
"000" & q(11) & "000" & q(10) & "000" & q( 9) & "000" & q( 8);
bpp1_slice(0) <= "0000" & q( 7) & "000" & q( 6) & "000" & q( 5) & "000" & q( 4) &
"000" & q( 3) & "000" & q( 2) & "000" & q( 1) & "000" & q( 0);
-- Indicate the word_num phases to read the fifo for each BPP mode
read_phase <= '1' when (bpp_mode = 2x"1" and word_num(0) = 2x"3") or
(bpp_mode = 2x"2" and word_num(0)(0) = '1') or
bpp_mode = 2x"3" or bpp_mode = 2x"0" else '0';
-- @formatter:on
pixel_buf_wr_data <= pixel_buf_wr_data_int(31 downto 0);
pixel_buf_last_word <= pixel_buf_wr_data_int(32);
-- Instantiate The FIFO.
preslicer_fifo_inst : entity work.alt_sync_fifo
generic map
(
DATA_WIDTH => 33,
DEPTH => DEPTH,
REGISTER_OUTPUT => "ON",
NEARLY_FULL => ALMOST_FULL_THRESH,
DEVICE_FAMILY => DEVICE_FAMILY,
SHOWAHEAD => "ON",
CHECKING => "ON"
)
port map
(
clk => clk,
sclr => clear_buffer,
wrdata => ps_buf_wr_data_int,
wrreq => ps_buf_wr_int,
almost_full => almost_full,
empty => empty,
rdreq => rdreq,
rddata => q
);
-- Flag to print streamer we're ready for data until almost full
ps_buf_rdy <= not almost_full;
rdreq <= pixel_buf_rdy_int and not empty and read_phase;
PRESLICER_CTRL : process(rst_n, clk) is
begin
if rst_n = '0' then
pixel_buf_wr <= '0';
word_num(0) <= (others => '0');
elsif clk'event and clk = '1' then
-- Select, for the data output from the expanded slice, using the matching pipelined word_num value.
if bpp_mode = 2x"1" then
pixel_buf_wr_data_int <= bpp1_slice(to_integer(unsigned(word_num(0))));
elsif bpp_mode = 2x"2" then
pixel_buf_wr_data_int <= bpp2_slice(to_integer(unsigned(word_num(0)(0 downto 0))));
else
pixel_buf_wr_data_int <= bpp3_slice(0);
end if;
-- Start writing to the pixel buffer when word_num reaches 2. Clear if pixel buffer is stalled
-- (aligned with output stage).
pixel_buf_wr <= not empty and pixel_buf_rdy_int;
-- Read from the FIFO if the pixel buffer is ready, and okay to read, but continue
-- if in the middle of a transfer. Similarly, increment the word_num index.
if pixel_buf_rdy_int = '1' and empty = '0' then
word_num(0) <= std_logic_vector(unsigned(word_num(0)) + 1);
end if;
if clear_buffer then
pixel_buf_wr <= '0';
word_num(0) <= (others => '0');
end if;
end if;
end process;
end rtl;

View file

@ -0,0 +1,169 @@
-------------------------------------------------------------------------------
--! @file
--! @brief SOM FPGA preslicer
--!
--! @details This block is the data core dual channel preslicer wrapper.
--!
--! @b Clock/resets:
--! @li clk : nominally 100MHz
--! @li rst_n : active low reset for clk (asynchronous assert)
--!
--! @b Interfaces:
--! @li bpp_mode : the current bits-per-pixel mode (1, 2 or 3---same as 4BPP)
--! @li clear_buffer : Pixel buffer clear pulse input
--! @li ps_buf_wr_data* : print streamer data input
--! @li ps_buf_wr* : Write strobe input for print streamer data
--! @li ps_buf_rdy* : Ready output towards print streamer
--! @li ps_buf_last_word* : input to flag last word of a image's stripes
--! @li pixel_buf_wr_data* : pixel buffer data data output
--! @li pixel_buf_wr* : Write strobe output to pixel buffer
--! @li pixel_buf_rdy : Ready input from pixel buffer
--! @li pixel_buf_last_word : Output flagging last word of an image's stripes
--!
--! @b Clock-crossing considerations:
--! @li Module is a single clock domain synchronous block
--!
--! @b Language build standard requirements:
--! @li VHDL 2008
--!
--! @author Simon Southwell
--! @copyright (c) 2020 Global Inkjet Systems
--! @date 2020-04-02
-------------------------------------------------------------------------------
-- altera vhdl_input_version vhdl_2008
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity preslicer_dual is
generic (
NUM_STRIPES_DEPTH : integer range 2 to 32 := 8; -- whole 1bpp equivalent stripes must it be possible to buffer in preslicer
NUM_STRIPES_FULL_MARGIN : integer range 1 to 31 := 2; -- at least this many 1bpp equivalent stripes space must be available
SHIFT_DEPTH : integer range 1 to 2048 := 128; -- head shift buffer depth
MAX_OP_WIDTH : natural range 1 to 128 := 8;
NO_ZERO_GAP : boolean := false
);
port
(
clk : in std_logic;
rst_n : in std_logic;
bpp_mode : in std_logic_vector( 1 downto 0);
clear_buffer : in std_logic;
-- Interface to print streamer
ps_buf_wr : in std_logic;
ps_buf_wr_data : in std_logic_vector(31 downto 0);
ps_buf_rdy : out std_logic;
ps_buf_last_word : in std_logic;
-- Auxiliary print streamer interafce. Used only if mutually
-- exclusive from main interafce (shared memory port)
ps_buf_wr_aux : in std_logic;
ps_buf_wr_data_aux : in std_logic_vector(31 downto 0);
ps_buf_rdy_aux : out std_logic;
ps_buf_last_word_aux : in std_logic;
-- Output data
pixel_buf_wr_aux : out std_logic;
pixel_buf_wr : out std_logic;
pixel_buf_wr_data : out std_logic_vector(31 downto 0);
pixel_buf_wr_data_aux : out std_logic_vector(31 downto 0);
pixel_buf_rdy : in std_logic_vector( 1 downto 0);
pixel_buf_last_word : out std_logic_vector( 1 downto 0)
);
end preslicer_dual;
architecture rtl of preslicer_dual is
type data_array_t is array (0 to 1) of std_logic_vector(31 downto 0);
signal ps_buf_wr_int : std_logic_vector(1 downto 0);
signal ps_buf_wr_data_int : data_array_t;
signal ps_buf_rdy_int : std_logic_vector(1 downto 0);
signal ps_buf_last_word_int : std_logic_vector(1 downto 0);
signal pixel_buf_wr_int : std_logic_vector(1 downto 0);
signal pixel_buf_wr_data_int : data_array_t;
signal pixel_buf_rdy_int : std_logic_vector(1 downto 0);
signal pixel_buf_last_word_int : std_logic_vector(1 downto 0);
begin
ps_buf_wr_int(0) <= ps_buf_wr;
ps_buf_wr_data_int(0) <= ps_buf_wr_data;
ps_buf_rdy <= ps_buf_rdy_int(0);
ps_buf_last_word_int(0) <= ps_buf_last_word;
pixel_buf_wr <= pixel_buf_wr_int(0);
pixel_buf_wr_data <= pixel_buf_wr_data_int(0);
pixel_buf_rdy_int(0) <= pixel_buf_rdy(0);
pixel_buf_last_word(0) <= pixel_buf_last_word_int(0);
GEN_ZG: if NO_ZERO_GAP = false generate
ps_buf_wr_int(1) <= ps_buf_wr_aux;
ps_buf_wr_data_int(1) <= ps_buf_wr_data_aux;
ps_buf_last_word_int(1) <= ps_buf_last_word_aux;
ps_buf_rdy_aux <= ps_buf_rdy_int(1);
pixel_buf_wr_aux <= pixel_buf_wr_int(1);
pixel_buf_wr_data_aux <= pixel_buf_wr_data_int(1);
pixel_buf_rdy_int(1) <= pixel_buf_rdy(1);
pixel_buf_last_word(1) <= pixel_buf_last_word_int(1);
end generate;
GEN_NO_ZG_TIE_OFF : if NO_ZERO_GAP generate
ps_buf_wr_int(1) <= '0';
ps_buf_wr_data_int(1) <= (others => '0');
ps_buf_last_word_int(1) <= '0';
ps_buf_rdy_aux <= '0';
pixel_buf_wr_aux <= '0';
pixel_buf_wr_data_aux <= (others => '0');
pixel_buf_rdy_int(1) <= '0';
pixel_buf_last_word(1) <= '0';
end generate;
GEN_PRESLICER : for i in 0 to 1 generate
GEN_NO_ZG : if i = 0 or NO_ZERO_GAP = false generate
preslicer_inst : entity work.preslicer
generic map (
NUM_STRIPES_DEPTH => NUM_STRIPES_DEPTH,
NUM_STRIPES_FULL_MARGIN => NUM_STRIPES_FULL_MARGIN,
SHIFT_DEPTH => SHIFT_DEPTH,
MAX_OP_WIDTH => MAX_OP_WIDTH
)
port map
(
clk => clk,
rst_n => rst_n,
bpp_mode => bpp_mode,
clear_buffer => clear_buffer,
ps_buf_wr => ps_buf_wr_int(i),
ps_buf_wr_data => ps_buf_wr_data_int(i),
ps_buf_rdy => ps_buf_rdy_int(i),
ps_buf_last_word => ps_buf_last_word_int(i),
-- Output data
pixel_buf_wr => pixel_buf_wr_int(i),
pixel_buf_wr_data => pixel_buf_wr_data_int(i),
pixel_buf_rdy => pixel_buf_rdy_int(i),
pixel_buf_last_word => pixel_buf_last_word_int(i)
);
end generate;
end generate;
end rtl;

View file

@ -30,9 +30,6 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pkg_functions.all;
entity freq_counter is
generic (

View file

@ -23,7 +23,7 @@
#
# -------------------------------------------------------------------------- #
QUARTUS_VERSION = "17.0"
QUARTUS_VERSION = "18.1"
DATE = "17:29:20 August 17, 2017"
# Revisions

View file

@ -42,7 +42,7 @@ set_global_assignment -name DEVICE 10CL006YU256C8G
set_global_assignment -name TOP_LEVEL_ENTITY hmb_fpga_top
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 17.0.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "17:29:20 AUGUST 17, 2017"
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Standard Edition"
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 SP0.18std Standard Edition"
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
@ -228,6 +228,9 @@ set_location_assignment PIN_G2 -to led_out[4]
set_location_assignment PIN_G1 -to led_out[5]
set_global_assignment -name VHDL_FILE ../src/hmb_head_monitor.vhd
set_global_assignment -name VERILOG_FILE ../src/simple_i2c_slave.v
set_global_assignment -name VHDL_FILE ../src/hmb_fpga_pkg_auto.vhd
set_global_assignment -name VHDL_FILE ../src/hmb_fpga_csr_decode_auto.vhd
set_global_assignment -name VHDL_FILE ../src/hmb_fpga_csr_regs_auto.vhd
set_global_assignment -name VHDL_FILE ../src/hmb_fpga_top.vhd
set_global_assignment -name QIP_FILE ip/lvds_rx_1ck_16d.qip
set_global_assignment -name QIP_FILE ip/pll_25in_100out.qip

View file

@ -0,0 +1,21 @@
###################################################################
# Makefile for HMB-DG logic synthesis
#
# Copyright (c) 2020 Global Inkjet Systems
#
###################################################################
TOP_NAME = hmb_fpga_top
MAKE_EXE = mingw32-make
QUARTUS_EXE = quartus_sh
OUTDIR = output_files
all:
@${MAKE_EXE} -C ..\test autobuild
@${QUARTUS_EXE} --flow compile ${TOP_NAME}.qpf
clean:
@rm -rf db incremental_db
@rm -rf ${OUTDIR}/*

File diff suppressed because it is too large Load diff

View file

@ -1,22 +1,54 @@
[{
"ip_name" : "hmb_fpga",
"bus" : "csr",
"addr_width" : "16",
"description" : "This block the top level HMB FPGA",
"addr_hi_bit" : "9",
"addr_lo_bit" : "5",
"notes" : "The <tt style='color:#0000c0'>SHUTDN_ENx</tt> registers define which new monitor enables are to be set when an update is instigated. A bit set at 1 will update the equivalent enable. A bit at 0 has no effect, effectively leaving that enable in its previous state. To update the actual enables, the return-to-zero <tt style='color:#0000c0'>SHUTDN_GO</tt> register is written as 1. The enables are then set with the values in the <tt style='color:#0000c0'>SHUTDN_ENx</tt> registers after a delay. The delay is programmed via the <tt style='color:#0000c0'>SHUTDN_DLY_LO</tt>, <tt style='color:#0000c0'>SHUTDN_DLY_MID</tt> and <tt style='color:#0000c0'>SHUTDN_DLY_HI</tt> registers giving 24 bits of delay, in units of the system clock (nominally 10ns). If the delay registers are zero, then the enables are updated immediately on a <tt style='color:#0000c0'>GO</tt>. Otherwise, they are updated after the programmed delay. This mechanism can only set the enable bits. The <tt style='color:#0000c0'>SHUTDN_CLRx</tt> return-to-zero registers are used to clear the monitor enables. Writing a 1 in the bit position will clear that bit. This clearing is immediate, and does not use the delay mechanism. If a delay is in progress the clearing of the enable is ignored. The watch dog is controlled via the <tt style='color:#0000c0'>WD_CTRL</tt> register. The watchdog is enabled with the <tt style='color:#0000c0'>EN</tt> field and must then be periodically cleared by writing 1 to the return-to-zero <tt style='color:#0000c0'>CLR</tt> field. The clearing must occur before the period specified by the <tt style='color:#0000c0'>PERIOD</tt> field, which has units of 100ms. If the watchdog fires, then the <tt style='color:#0000c0'>WD_STATUS</tt> register indicates this. If any event causes a shutdown then the <tt style='color:#0000c0'>SHUTDOWN_MASTER</tt> register indicates this. The actual cause for the shutdown must then be inspected from the individual monitor registers. Some design-for-test registers are provided. The two <tt style='color:#0000c0'>SCRATCHx</tt> registers allow verification of I<sup>2</sup>C communications with the slave FPGA, whilst the <tt style='color:#0000c0'>TEST_TRIP</tt> register allows the artifical generation of a limited number of shutdown events by the software. The <tt style='color:#0000c0'>DBG_LED</tt> register allows the CPU to take control of the LEDs (set <tt style='color:#0000c0'>EN</tt> field) and then set a value (<tt style='color:#0000c0'>VAL</tt> field).",
"sub_blocks" : {
"local" : {
"instance" : "",
"process" : "hdl, cpp, txt",
"offset" : "0x000"
},
"monitor:a" : {
"instance" : "0",
"process" : "cpp",
"offset" : "0x020"
},
"monitor:b" : {
"instance" : "1",
"process" : "cpp",
"offset" : "0x040"
},
"monitor:c" : {
"instance" : "2",
"process" : "cpp",
"offset" : "0x060"
},
"monitor:d" : {
"instance" : "3",
"process" : "cpp",
"offset" : "0x080"
}
},
"registers" : {
"scratch0" : {
"ip_id" : {
"address" : "0",
"width" : "8",
"type" : "w",
"reset" : "0",
"description" : "Scratch register 0"
"description" : "Unique ID for this IP block",
"type" : "c",
"bit_len" : "8",
"reset" : "0x29"
},
"scratch1" : {
"ip_ver" : {
"address" : "1",
"width" : "8",
"type" : "w",
"reset" : "0",
"description" : "Scratch register 1"
"description" : "Version number",
"type" : "c",
"bit_len" : "8",
"reset" : "0x02"
},
"cpu_dbg_led" : {
"address" : "2",
@ -47,76 +79,76 @@
"shutdn_en0" : {
"address" : "4",
"width" : "5",
"description" : "Shutdown trip enables",
"description" : "Shutdown new trip enables for channel 0",
"fields": {
"head_trip" : {
"type" : "w",
"bit_len" : "4",
"reset" : "0",
"description" : "Enable trips from head 0"
"description" : "Set new enable of trips from head 0"
},
"amp_trip" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "Enable trip from amp 0"
"description" : "Set new enable of trip from amp 0"
}
}
},
"shutdn_en1" : {
"address" : "5",
"width" : "5",
"description" : "Shutdown trip enables",
"description" : "Shutdown new trip enables for channel 1",
"fields": {
"head_trip" : {
"type" : "w",
"bit_len" : "4",
"reset" : "0",
"description" : "Enable trips from head 1"
"description" : "Set new enable of trips from head 1"
},
"amp_trip" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "Enable trip from amp 1"
"description" : "Set new enable of trip from amp 1"
}
}
},
"shutdn_en2" : {
"address" : "6",
"width" : "5",
"description" : "Shutdown trip enables",
"description" : "Shutdown new trip enables for channel 2",
"fields": {
"head_trip" : {
"type" : "w",
"bit_len" : "4",
"reset" : "0",
"description" : "Enable trips from head 2"
"description" : "Set new enable of trips from head 2"
},
"amp_trip" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "Enable trip from amp 2"
"description" : "Set new enable of trip from amp 2"
}
}
},
"shutdn_en3" : {
"address" : "7",
"width" : "5",
"description" : "Shutdown trip enables",
"description" : "Shutdown new trip enables for channel 3",
"fields": {
"head_trip" : {
"type" : "w",
"bit_len" : "4",
"reset" : "0",
"description" : "Enable trips from head 3"
"description" : "Set new enable of trips from head 3"
},
"amp_trip" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "Enable trip from amp 3"
"description" : "Set new enable of trip from amp 3"
}
}
},
@ -171,118 +203,28 @@
"type" : "r",
"reset" : "0",
"description" : "Watchdog fire alarm status"
},
"h0_therm_rst" : {
"address" : "64",
"width" : "1",
"type" : "w0",
"reset" : "0",
"description" : "Head 0 thermal reset"
},
"h0_therm_trip_status" : {
"address" : "65",
"width" : "3",
"type" : "r",
"reset" : "0",
"description" : "Head 0 thermal trip status"
},
"h0_shutdn_clr" : {
"address" : "66",
},
"scratch0" : {
"address" : "22",
"width" : "8",
"type" : "w0",
"type" : "w",
"reset" : "0",
"description" : "Shutdown clear"
"description" : "Scratch register 0"
},
"h0_shutdn_status" : {
"address" : "67",
"scratch1" : {
"address" : "23",
"width" : "8",
"type" : "r",
"type" : "w",
"reset" : "0",
"description" : "Shutdown status"
"description" : "Scratch register 1"
},
"h1_therm_rst" : {
"address" : "80",
"width" : "1",
"type" : "w0",
"reset" : "0",
"description" : "Head 0 thermal reset"
},
"h1_therm_trip_status" : {
"address" : "81",
"width" : "3",
"type" : "r",
"reset" : "0",
"description" : "Head 0 thermal trip status"
},
"h1_shutdn_clr" : {
"address" : "82",
"i2c_timeout" : {
"address" : "24",
"width" : "8",
"type" : "w0",
"reset" : "0",
"description" : "Shutdown clear"
},
"h1_shutdn_status" : {
"address" : "83",
"width" : "8",
"type" : "r",
"reset" : "0",
"description" : "Shutdown status"
},
"h2_therm_rst" : {
"address" : "96",
"width" : "1",
"type" : "w0",
"reset" : "0",
"description" : "Head 0 thermal reset"
},
"h2_therm_trip_status" : {
"address" : "97",
"width" : "3",
"type" : "r",
"reset" : "0",
"description" : "Head 0 thermal trip status"
},
"h2_shutdn_clr" : {
"address" : "98",
"width" : "8",
"type" : "w0",
"reset" : "0",
"description" : "Shutdown clear"
},
"h2_shutdn_status" : {
"address" : "99",
"width" : "8",
"type" : "r",
"reset" : "0",
"description" : "Shutdown status"
},
"h3_therm_rst" : {
"address" : "112",
"width" : "1",
"type" : "w0",
"reset" : "0",
"description" : "Head 0 thermal reset"
},
"h3_therm_trip_status" : {
"address" : "113",
"width" : "3",
"type" : "r",
"reset" : "0",
"description" : "Head 0 thermal trip status"
},
"h3_shutdn_clr" : {
"address" : "114",
"width" : "8",
"type" : "w0",
"reset" : "0",
"description" : "Shutdown clear"
},
"h3_shutdn_status" : {
"address" : "115",
"width" : "8",
"type" : "r",
"reset" : "0",
"description" : "Shutdown status"
"type" : "w",
"reset" : "60",
"description" : "Number of milliseconds that slave or master i2c can hold bus before being reset"
}
}

View file

@ -37,6 +37,7 @@ use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.hmb_fpga_pkg.all;
entity hmb_fpga_top is
generic(
@ -55,7 +56,7 @@ entity hmb_fpga_top is
shutdown_out : out std_logic;
therm_trip_rst : out std_logic;
-- thermal trips from onboard comparitors looking at therm_N/P[2:0] from head connectors
-- present on FLX-FD-SG600 V1.0
-- not present on FLX-FD-SG1024 V0.0
@ -78,9 +79,13 @@ architecture struct of hmb_fpga_top is
-- Verilog module needs component declaration
component simple_i2c_slave
generic (
FLT_LEN : integer := 20
);
port
(
clk : in std_logic;
reset : in std_logic;
scl_in : in std_logic;
scl_out : out std_logic;
sda_in : in std_logic;
@ -99,39 +104,40 @@ architecture struct of hmb_fpga_top is
type therm_trip_t is array (0 to 3) of std_logic_vector(2 downto 0);
type shutdn_trip_t is array (0 to 3) of std_logic_vector(4 downto 0);
function calcFiltLen(testMode : boolean) return integer is
begin
if testMode then
return 2; -- I2C SCL SDA filter 2 clocks in test mode
else
return 20;-- I2C SCL SDA filter 20 clocks (200ns) in normal mode
end if;
end function calcFiltLen;
constant CYCLES_PER_US : integer := 99;
constant I2C_FLT_LEN : integer := calcFiltLen(TEST_MODE);
constant LVDS_CLK1_BIT : integer range 0 to 32 := 14;
constant I2C_ADDR_SCRATCH0 : std_logic_vector(15 downto 0) := 16x"0000";
constant I2C_ADDR_SCRATCH1 : std_logic_vector(15 downto 0) := 16x"0001";
constant I2C_ADDR_DBG_LED : std_logic_vector(15 downto 0) := 16x"0002";
constant I2C_ADDR_SHTDN_OUT : std_logic_vector(15 downto 0) := 16x"0003";
constant I2C_ADDR_SHUT_EN_H0 : std_logic_vector(15 downto 0) := 16x"0004";
constant I2C_ADDR_SHUT_EN_H1 : std_logic_vector(15 downto 0) := 16x"0005";
constant I2C_ADDR_SHUT_EN_H2 : std_logic_vector(15 downto 0) := 16x"0006";
constant I2C_ADDR_SHUT_EN_H3 : std_logic_vector(15 downto 0) := 16x"0007";
constant I2C_ADDR_TST_SHUTDN : std_logic_vector(15 downto 0) := 16x"0008";
constant I2C_ADDR_WD_CTRL : std_logic_vector(15 downto 0) := 16x"0010";
constant I2C_ADDR_WD_STATUS : std_logic_vector(15 downto 0) := 16x"0011";
constant I2C_ADDR_MON_BASE_H0 : std_logic_vector(15 downto 0) := 16x"0040";
constant I2C_ADDR_MON_BASE_H1 : std_logic_vector(15 downto 0) := 16x"0050";
constant I2C_ADDR_MON_BASE_H2 : std_logic_vector(15 downto 0) := 16x"0060";
constant I2C_ADDR_MON_BASE_H3 : std_logic_vector(15 downto 0) := 16x"0070";
-- System clocks
signal clk100 : std_logic;
signal clk_lvds : std_logic;
signal rst_n : std_logic := '0';
-- I2C signals
signal scl_in : std_logic;
signal scl_out : std_logic;
signal sda_in : std_logic;
signal sda_out : std_logic;
signal address : std_logic_vector(15 downto 0);
signal wr_data : std_logic_vector(7 downto 0);
signal rd_data : std_logic_vector(7 downto 0);
signal wr_en : std_logic := '0';
signal rd_en : std_logic := '0';
signal avs_csr_address : std_logic_vector(15 downto 0);
signal avs_csr_writedata : std_logic_vector(31 downto 0) := (others => '0');
signal avs_csr_readdata : std_logic_vector(31 downto 0) := (others => '0');
signal avs_csr_write : std_logic := '0';
signal avs_csr_read : std_logic := '0';
signal local_readdata : std_logic_vector(31 downto 0);
signal local_read : std_logic;
signal local_write : std_logic;
signal rd_dv : std_logic := '0';
-- LEDs
@ -145,7 +151,8 @@ architecture struct of hmb_fpga_top is
signal data_d2 : std_logic_vector(111 downto 0);
-- Shutdown signals
signal hd_mon_csel : std_logic_vector(3 downto 0) := (others => '0');
signal hd_mon_wr : std_logic_vector(3 downto 0) := (others => '0');
signal hd_mon_rd : std_logic_vector(3 downto 0) := (others => '0');
signal shutdown_int : std_logic_vector(3 downto 0) := (others => '0');
signal shutdn_trip_en : std_logic_vector(4 * 5 - 1 downto 0) := (others => '0');
@ -177,16 +184,30 @@ architecture struct of hmb_fpga_top is
signal test_shtdn : std_logic_vector(7 downto 0) := 8x"0";
signal shutdown_comb : std_logic;
signal i2c_slv_reset : std_logic := '0';
signal i2c_slv_active_uscnt : integer range 0 to 101 := 0;
signal i2c_slv_active_uscnt_tick : std_logic := '0';
signal i2c_slv_active_mscnt : integer range 0 to 1001 := 0;
signal i2c_slv_active_mscnt_tick : std_logic := '0';
signal i2c_slv_active_ms : integer range 0 to 255 := 0;
signal i2c_slv_reset_count : std_logic_vector(7 downto 0) := (others => '0');
signal i2c_timeout : std_logic_vector(7 downto 0);
begin
------------------------------------------------------------------------------
-- I/O Assignments
------------------------------------------------------------------------------
shutdown_out <= shutdown_int(0) or
shutdown_int(1) or
shutdown_int(2) or
shutdown_int(3) or
wd_alarm;
shutdown_out <= shutdown_comb;
shutdown_comb <= shutdown_int(0) or
shutdown_int(1) or
shutdown_int(2) or
shutdown_int(3) or
wd_alarm;
therm_trip_rst <= therm_en(0) or
therm_en(1) or
@ -234,11 +255,11 @@ begin
hd_mon_inst : entity work.hmb_head_monitor
port map(
clk => clk100,
rst_n => '1',
avs_csr_address => address(3 downto 0),
avs_csr_write => (hd_mon_csel(i) and wr_en),
avs_csr_writedata => (24x"0" & wr_data),
avs_csr_read => (hd_mon_csel(i) and rd_en),
rst_n => rst_n,
avs_csr_address => avs_csr_address(3 downto 0),
avs_csr_write => hd_mon_wr(i),
avs_csr_writedata => (avs_csr_writedata),
avs_csr_read => hd_mon_rd(i),
avs_csr_readdata => mon_read_data(i),
n_therm_trip_in => n_therm_trip(i),
therm_enable_out => therm_en(i),
@ -266,6 +287,10 @@ begin
clk_en_10hz <= '0';
end if;
if rst_n = '0' and cnt_10hz > 100 then
rst_n <= '1';
end if;
if clk_en_10hz = '1' then
-- Change led scan direction when end LEDs are set.
@ -301,25 +326,96 @@ begin
end process;
led_out <= cpu_led(5 downto 1) when cpu_led(0) = '1' else led(5) & data_d1(20) & data_d1(41) & data_d1(62) & data_d1(83);
--led_out <= cpu_led(5 downto 1) when cpu_led(0) = '1' else led(5) & data_d1(20) & data_d1(41) & data_d1(62) & data_d1(83);
led_out <= '0' & clk_pclk & data_d1(12) & data_d1(9) & data_d1(0);
------------------------------------------------------------------------------
-- Instantiate I2C slave
------------------------------------------------------------------------------
process(clk100)
begin
if rising_edge(clk100) then
-- Read data is valid the cycle after avs_csr_read is asserted
rd_dv <= avs_csr_read;
end if;
end process;
I2C_SLAVE_MON: process (clk100)
begin
if clk100'event and clk100 = '1' then
-- defaults
i2c_slv_reset <= '0';
i2c_slv_active_uscnt_tick <= '0';
i2c_slv_active_mscnt_tick <= '0';
if rst_n = '0' then
i2c_slv_active_uscnt <= 0;
i2c_slv_active_mscnt <= 0;
i2c_slv_active_ms <= 0;
elsif (scl_out = '0' or sda_out = '0') then
i2c_slv_active_uscnt <= i2c_slv_active_uscnt + 1;
if i2c_slv_active_uscnt = 99 then
i2c_slv_active_uscnt_tick <= '1';
i2c_slv_active_uscnt <= 0;
end if;
if i2c_slv_active_uscnt_tick = '1' then
i2c_slv_active_mscnt <= i2c_slv_active_mscnt + 1;
if ((i2c_slv_active_mscnt = 999 and not TEST_MODE)
or (i2c_slv_active_mscnt = 9 and TEST_MODE)) then
i2c_slv_active_mscnt_tick <= '1';
i2c_slv_active_mscnt <= 0;
end if;
end if;
if i2c_slv_active_mscnt_tick = '1' then
i2c_slv_active_ms <= i2c_slv_active_ms + 1;
if i2c_slv_active_ms = to_integer(unsigned(i2c_timeout)) then -- I2C bus stuck. We have been driving SCL or SDA low for > Timeout ms
i2c_slv_reset <= '1';
i2c_slv_active_ms <= 0;
end if;
end if;
else
i2c_slv_active_uscnt <= 0;
i2c_slv_active_uscnt_tick <= '0';
i2c_slv_active_ms <= 0;
end if;
if rst_n = '0' then
i2c_slv_reset_count <= (others => '0');
if TEST_MODE then
i2c_slv_reset_count(0) <= '1'; -- so can check readback works
end if;
elsif i2c_slv_reset = '1' then
if i2c_slv_reset_count /= x"FF" then
i2c_slv_reset_count <= std_logic_vector(unsigned(i2c_slv_reset_count) + 1);
end if;
end if;
end if;
end process;
simple_i2c_slave_inst : simple_i2c_slave
generic map (
FLT_LEN => I2C_FLT_LEN
)
port map(
clk => clk100,
reset => i2c_slv_reset or not rst_n,
scl_in => scl_in,
scl_out => scl_out,
sda_in => sda_in,
sda_out => sda_out,
i2c_busy_out => open,
add_out => address,
wr_data_out => wr_data,
wr_en_out => wr_en,
rd_en_out => rd_en,
rd_data_in => rd_data,
add_out => avs_csr_address,
wr_data_out => avs_csr_writedata(7 downto 0),
wr_en_out => avs_csr_write,
rd_en_out => avs_csr_read,
rd_data_in => avs_csr_readdata(7 downto 0),
rd_dv_in => rd_dv
);
@ -352,7 +448,7 @@ begin
-- In test mode, wire the compare counter to the micorsecnd counter
-- to speed up simulations
GEN_CMP_CNT_TEST : if TEST_MODE = true generate
GEN_CMP_CNT_TEST : if TEST_MODE generate
cmp_count <= us_count(3 downto 0);
@ -366,7 +462,7 @@ begin
end if;
-- If watchdog enabled and no shut down, count the time
if en_wd = '1' and shutdown_out = '0' then
if en_wd = '1' and shutdown_comb = '0' then
clk_count <= std_logic_vector(unsigned(clk_count) + 1);
@ -401,65 +497,77 @@ begin
------------------------------------------------------------------------------
-- Create registers (non-monitor) and address decoding
-- Create registers (non-monitor) and avs_csr_address decoding
------------------------------------------------------------------------------
hd_mon_csel(0) <= '1' when (address(15 downto 4) = I2C_ADDR_MON_BASE_H0(15 downto 4)) else '0';
hd_mon_csel(1) <= '1' when (address(15 downto 4) = I2C_ADDR_MON_BASE_H1(15 downto 4)) else '0';
hd_mon_csel(2) <= '1' when (address(15 downto 4) = I2C_ADDR_MON_BASE_H2(15 downto 4)) else '0';
hd_mon_csel(3) <= '1' when (address(15 downto 4) = I2C_ADDR_MON_BASE_H3(15 downto 4)) else '0';
hmb_fpga_csr_decode_inst : entity work.hmb_fpga_csr_decode
generic map (
ADDR_DECODE_HI_BIT => 9,
ADDR_DECODE_LO_BIT => 5
)
port map (
process(clk100)
begin
if rising_edge(clk100) then
local_write => local_write,
local_read => local_read,
local_readdata => local_readdata,
monitor_0_write => hd_mon_wr(0),
monitor_0_read => hd_mon_rd(0),
monitor_0_readdata => mon_read_data(0),
monitor_1_write => hd_mon_wr(1),
monitor_1_read => hd_mon_rd(1),
monitor_1_readdata => mon_read_data(1),
monitor_2_write => hd_mon_wr(2),
monitor_2_read => hd_mon_rd(2),
monitor_2_readdata => mon_read_data(2),
monitor_3_write => hd_mon_wr(3),
monitor_3_read => hd_mon_rd(3),
monitor_3_readdata => mon_read_data(3),
-- Default register values
clr_wd <= '0';
rd_data <= 8x"0";
test_shtdn <= 8x"0";
avs_address => avs_csr_address(9 downto 5),
avs_write => avs_csr_write,
avs_read => avs_csr_read,
avs_readdata => avs_csr_readdata
-- Read data is valid the cycle after rd_en is asserted
rd_dv <= rd_en;
);
-- Write registers
if wr_en = '1' then
case address is
when I2C_ADDR_SCRATCH0 => scratch0 <= wr_data(7 downto 0);
when I2C_ADDR_SCRATCH1 => scratch1 <= wr_data(7 downto 0);
when I2C_ADDR_DBG_LED => cpu_led <= wr_data(5 downto 0);
when I2C_ADDR_TST_SHUTDN => test_shtdn <= wr_data(7 downto 0);
when I2C_ADDR_SHUT_EN_H0 => shutdn_trip_en(4 downto 0) <= wr_data(4 downto 0);
when I2C_ADDR_SHUT_EN_H1 => shutdn_trip_en(9 downto 5) <= wr_data(4 downto 0);
when I2C_ADDR_SHUT_EN_H2 => shutdn_trip_en(14 downto 10) <= wr_data(4 downto 0);
when I2C_ADDR_SHUT_EN_H3 => shutdn_trip_en(19 downto 15) <= wr_data(4 downto 0);
when I2C_ADDR_WD_CTRL => clr_wd <= wr_data(0);
en_wd <= wr_data(1);
wd_period <= wr_data(5 downto 2);
when others => null;
end case;
end if;
hmb_fpga_csr_regs_inst : entity work.hmb_fpga_csr_regs
generic map(
ADDR_DECODE_WIDTH => 5
)
port map(
-- Clock and reset
clk => clk100,
rst_n => rst_n,
-- Read registers
case? address is
when I2C_ADDR_SCRATCH0 => rd_data(7 downto 0) <= scratch0;
when I2C_ADDR_SCRATCH1 => rd_data(7 downto 0) <= scratch1;
when I2C_ADDR_DBG_LED => rd_data(5 downto 0) <= cpu_led;
when I2C_ADDR_SHTDN_OUT => rd_data(0) <= shutdown_out;
when I2C_ADDR_SHUT_EN_H0 => rd_data(3 downto 0) <= shutdn_trip_en(3 downto 0);
when I2C_ADDR_SHUT_EN_H1 => rd_data(3 downto 0) <= shutdn_trip_en(7 downto 4);
when I2C_ADDR_SHUT_EN_H2 => rd_data(3 downto 0) <= shutdn_trip_en(11 downto 8);
when I2C_ADDR_SHUT_EN_H3 => rd_data(3 downto 0) <= shutdn_trip_en(15 downto 12);
when I2C_ADDR_MON_BASE_H0(15 downto 4) & "----" => rd_data <= mon_read_data(0)(7 downto 0);
when I2C_ADDR_MON_BASE_H1(15 downto 4) & "----" => rd_data <= mon_read_data(1)(7 downto 0);
when I2C_ADDR_MON_BASE_H2(15 downto 4) & "----" => rd_data <= mon_read_data(2)(7 downto 0);
when I2C_ADDR_MON_BASE_H3(15 downto 4) & "----" => rd_data <= mon_read_data(3)(7 downto 0);
when I2C_ADDR_WD_CTRL => rd_data(5 downto 0) <= wd_period & en_wd & clr_wd;
when I2C_ADDR_WD_STATUS => rd_data(0) <= wd_alarm;
when others => rd_data(0) <= '0';
end case?;
end if;
scratch0 => scratch0,
scratch1 => open,
cpu_dbg_led_en => cpu_led(0),
cpu_dbg_led_val => cpu_led(5 downto 1),
shutdown_master => shutdown_comb,
shutdn_en0_head_trip => shutdn_trip_en(3 downto 0),
shutdn_en0_amp_trip => shutdn_trip_en(4),
shutdn_en1_head_trip => shutdn_trip_en(8 downto 5),
shutdn_en1_amp_trip => shutdn_trip_en(9),
shutdn_en2_head_trip => shutdn_trip_en(13 downto 10),
shutdn_en2_amp_trip => shutdn_trip_en(14),
shutdn_en3_head_trip => shutdn_trip_en(18 downto 15),
shutdn_en3_amp_trip => shutdn_trip_en(19),
test_trip_head_trip => test_shtdn(3 downto 0),
test_trip_amp_trip => test_shtdn(7 downto 4),
wd_ctrl_clr => clr_wd,
wd_ctrl_en => en_wd,
wd_ctrl_period => wd_period,
wd_status => wd_alarm,
end process;
i2c_timeout => i2c_timeout,
avs_address => avs_csr_address(4 downto 0),
avs_write => local_write,
avs_writedata => avs_csr_writedata,
avs_read => local_read,
avs_readdata => local_readdata
);
------------------------------------------------------------------------------
-- Instantiate deserialiser, 16 channel, 7:1, max 100MHz clock

View file

@ -146,6 +146,7 @@ end generate;
-- default values
therm_en_req <= '0'; -- any bit set by CSR write must by single cycle one-shot
shutdown_trip_clr_reg <= (others => '0'); -- any bit set by CSR write must by single cycle one-shot
avs_csr_readdata <= (others => '0');
-- write logic
if (avs_csr_write = '1') then

View file

@ -21,6 +21,7 @@
module simple_i2c_slave
(
input wire clk,
input wire reset,
input wire scl_in,
output wire scl_out,
input wire sda_in,
@ -39,6 +40,8 @@ module simple_i2c_slave
//----------------------------------------------------------------------------
// Parameters
localparam DEVICE_ADDRESS = 7'h39; // 7 bit Device Address
parameter WR_SIZE = 2'd3;
parameter FLT_LEN = 20; // Number of 100M clocks that signal is high or low to recognise
// Timing
// I2C State Machine States
@ -50,8 +53,12 @@ localparam TX_BYTE = 3'd4;
// Internal Signals
reg [2:0] scl_sr = 3'b111;
reg [2:0] sda_sr = 3'b111;
reg [FLT_LEN-1:0] scl_sr = {FLT_LEN{1'b1}};
reg [FLT_LEN-1:0] sda_sr = {FLT_LEN{1'b1}};
reg scl_filt = 1'b1;
reg sda_filt = 1'b1;
reg scl_filt_d = 1'b1;
reg sda_filt_d = 1'b1;
wire scl_re;
wire scl_fe;
@ -70,7 +77,7 @@ reg rnw = 1'b0;
reg [2:0] next_state = RX_BYTE;
reg [2:0] state = IDLE;
reg [15:0] add = 16'd0;
reg [7:0] wr_data = 8'd0;
reg wr_en = 1'b0;
@ -93,17 +100,40 @@ assign rd_en_out = read_pending;
//----------------------------------------------------------------------------
always @(posedge clk)
begin
scl_sr <= {scl_sr[1:0], scl_in};
sda_sr <= {sda_sr[1:0], sda_in};
if (reset == 1'b1) begin
scl_sr <= {FLT_LEN{1'b1}};
sda_sr <= {FLT_LEN{1'b1}};
scl_filt <= 1'b1;
sda_filt <= 1'b1;
scl_filt_d <= 1'b1;
sda_filt_d <= 1'b1;
end
else begin
scl_sr <= {scl_sr[FLT_LEN-2:0], scl_in};
sda_sr <= {sda_sr[FLT_LEN-2:0], sda_in};
if (&scl_sr[FLT_LEN-1:1] == 1'b1)
scl_filt <= 1'b1;
else if (|scl_sr[FLT_LEN-1:1] == 1'b0)
scl_filt <= 1'b0;
if (&sda_sr[FLT_LEN-1:1] == 1'b1)
sda_filt <= 1'b1;
else if (|sda_sr[FLT_LEN-1:1] == 1'b0)
sda_filt <= 1'b0;
scl_filt_d <= scl_filt;
sda_filt_d <= sda_filt;
end
end
assign scl_re = (scl_sr[2:1] == 2'b01);
assign scl_fe = (scl_sr[2:1] == 2'b10);
assign scl_hi = (scl_sr[2:1] == 2'b11);
assign sda_re = (sda_sr[2:1] == 2'b01);
assign sda_fe = (sda_sr[2:1] == 2'b10);
assign scl_re = ( scl_filt & !scl_filt_d);
assign scl_fe = (!scl_filt & scl_filt_d);
assign scl_hi = ( scl_filt);
assign sda_re = ( sda_filt & !sda_filt_d);
assign sda_fe = (!sda_filt & sda_filt_d);
assign start = sda_fe & scl_hi;
assign stop = sda_re & scl_hi;
@ -120,151 +150,174 @@ reg [7:0] rd_data = 8'd0;
//----------------------------------------------------------------------------
always @(posedge clk)
begin
case (state)
IDLE:
begin
bit_cnt <= 3'd0;
byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
wr_en <= 1'b0;
read_pending <= 1'b0;
i2c_busy <= 1'b0;
if (reset)
begin
state <= IDLE;
bit_cnt <= 3'd0;
byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
wr_en <= 1'b0;
read_pending <= 1'b0;
i2c_busy <= 1'b0;
if (start)
rnw <= 1'b0;
next_state <= RX_BYTE;
add <= 16'd0;
wr_data <= 8'd0;
rd_byte <= 8'd0;
rd_data <= 8'd0;
end
else
begin
case (state)
IDLE:
begin
state <= RX_BYTE;
end
end
bit_cnt <= 3'd0;
byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
wr_en <= 1'b0;
read_pending <= 1'b0;
i2c_busy <= 1'b0;
RX_BYTE :
if (stop)
begin
state <= IDLE;
end
else if (scl_re)
begin
rd_byte <= {rd_byte[6:0], sda_in}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (&bit_cnt)
begin
state <= SLV_ACK; // If last bit, go to Slave Acknowledge state
end
end
SLV_ACK:
if (stop)
begin
state <= IDLE;
end
else if (scl_fe)
begin
byte_cnt <= byte_cnt + 2'd1; // Increment the byte count
if ((byte_cnt == 2'd0) & (rd_byte[7:1] == DEVICE_ADDRESS))
i2c_busy <= 1'b1; // Assert so I/O control passes this through
if ((byte_cnt == 2'd0) & (rd_byte[7:1] != DEVICE_ADDRESS))
state <= IDLE; // If not for us, ignore
else
state <= ACK_HOLD; // Otherwise respond
if (rd_byte[0] & (byte_cnt == 2'd0))
next_state <= TX_BYTE;
else if (byte_cnt == 3'd3)
next_state <= IDLE;
else
next_state <= RX_BYTE;
if (byte_cnt == 2'd0)
rnw <= rd_byte[0];
if (~rnw)
begin
if (byte_cnt == 2'd1)
add[15:8] <= rd_byte;
if (byte_cnt == 2'd2)
add[7:0] <= rd_byte;
if (byte_cnt == 2'd3)
wr_data <= rd_byte;
end
wr_en <= ((~rnw) & (byte_cnt == 3'd3)); // Assert write strobe if last byte of a write command
read_pending <= rd_byte[0] & (byte_cnt == 2'd0);
if (byte_cnt == 8'd0)
sda <= (rd_byte[7:1] != DEVICE_ADDRESS); // If receiving byte address, verify before asserting ACK
else
sda <= 1'b0; // Send ACK once line is clear
end
ACK_HOLD:
if (stop)
begin
state <= IDLE;
wr_en <= 1'b0; // Clear write enable
end
else
begin
wr_en <= 1'b0; // Clear write enable
if (rd_dv_in)
if (start)
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
if (scl_fe)
begin
sda <= 1'b1; // On next falling edge, deassert SDA
scl <= ~read_pending; // If we're waiting for a read, keep SCL low
state <= next_state;
state <= RX_BYTE;
end
end
TX_BYTE:
RX_BYTE :
if (stop)
begin
state <= IDLE;
state <= IDLE;
end
else
else if (scl_re)
begin
if (rd_dv_in)
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
rd_byte <= {rd_byte[6:0], sda_in}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
scl <= ~read_pending; // Keep SCL low until read is complete
sda <= rd_data[7];
if (scl_fe)
begin
rd_data <= {rd_data[6:0], 1'b0}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (&bit_cnt)
state <= IDLE; // If last bit sent, go to idle condition
end
if (&bit_cnt)
begin
state <= SLV_ACK; // If last bit, go to Slave Acknowledge state
end
end
SLV_ACK:
if (stop)
begin
state <= IDLE;
end
else if (scl_fe)
begin
byte_cnt <= byte_cnt + 2'd1; // Increment the byte count
default :
begin // If we end up here, go to IDLE
bit_cnt <= 3'd0;
byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
read_pending <= 1'b0;
state <= IDLE;
end
if ((byte_cnt == 2'd0) & (rd_byte[7:1] == DEVICE_ADDRESS))
i2c_busy <= 1'b1; // Assert so I/O control passes this through
endcase
if ((byte_cnt == 2'd0) & (rd_byte[7:1] != DEVICE_ADDRESS))
state <= IDLE; // If not for us, ignore
else
state <= ACK_HOLD; // Otherwise respond
if (rd_byte[0] & (byte_cnt == 2'd0))
next_state <= TX_BYTE;
else if (byte_cnt == 3'd3)
next_state <= IDLE;
else
next_state <= RX_BYTE;
if (byte_cnt == 2'd0)
rnw <= rd_byte[0];
if (~rnw)
begin
if (byte_cnt == 2'd1)
add[15:8] <= rd_byte;
if (byte_cnt == 2'd2)
add[7:0] <= rd_byte;
if (byte_cnt == 2'd3)
wr_data <= rd_byte;
end
wr_en <= ((~rnw) & (byte_cnt == WR_SIZE)); // Assert write strobe if last byte of a write command
read_pending <= rd_byte[0] & (byte_cnt == 2'd0);
if (byte_cnt == 8'd0)
sda <= (rd_byte[7:1] != DEVICE_ADDRESS); // If receiving byte address, verify before asserting ACK
else
sda <= 1'b0; // Send ACK once line is clear
end
ACK_HOLD:
if (stop)
begin
state <= IDLE;
wr_en <= 1'b0; // Clear write enable
end
else
begin
wr_en <= 1'b0; // Clear write enable
if (rd_dv_in)
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
if (scl_fe)
begin
sda <= 1'b1; // On next falling edge, deassert SDA
scl <= ~read_pending; // If we're waiting for a read, keep SCL low
state <= next_state;
end
end
TX_BYTE:
if (stop)
begin
state <= IDLE;
end
else
begin
if (rd_dv_in)
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
scl <= ~read_pending; // Keep SCL low until read is complete
sda <= rd_data[7];
if (scl_fe)
begin
rd_data <= {rd_data[6:0], 1'b0}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (&bit_cnt)
state <= IDLE; // If last bit sent, go to idle condition
end
end
default :
begin // If we end up here, go to IDLE
bit_cnt <= 3'd0;
byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
read_pending <= 1'b0;
state <= IDLE;
end
endcase
end
end

View file

@ -7,4 +7,6 @@
@py -3 %FWTOOLSDIR%\gen_htm.py -j .\doc\test.json -b csr -B
@REM Add project specific build here. Normally just point to top of the repository for hierarchical scan
@py -3 %FWTOOLSDIR%\gen_elhal.py -j .\doc\test.json -b csr -o .\src\hal
@py -3 %FWTOOLSDIR%\gen_elhal.py -j .\doc\test.json -b csr -o .\src\hal
@py -3 %FWTOOLSDIR%\gen_elhal.py -j ..\doc\hmb_fpga.json -b csr -o .\src\hal
@py -3 %FWTOOLSDIR%\gen_hdl.py -j ..\doc\hmb_fpga.json -b csr -s _auto

View file

@ -9,6 +9,9 @@
../build/ip/io_buf_i2c.vhd
../build/ip/lvds_rx_1ck_16d.vhd
../build/ip/pll_25in_100out.vhd
../src/hmb_fpga_pkg_auto.vhd
../src/hmb_fpga_csr_decode_auto.vhd
../src/hmb_fpga_csr_regs_auto.vhd
../src/hmb_head_monitor.vhd
../src/hmb_fpga_top.vhd

View file

@ -8,68 +8,102 @@
# User files to build, passed in to vproc makefile build
USERCODE = VUserMain0.cpp utils.cpp runTest.cpp
MODELSIMDIR = c:\altera_18_1\ver\modelsim_ae
FWDEVTOOLS = e:/git/fw_development_tools
VPROCDIR = ${FWDEVTOOLS}/verification/vproc
MODELSIMDIR = c:\altera\ver\modelsim_ae
MODELSIMDIRAUX = c:\altera\ver\modelsim_ase
FWDEVTOOLS = ../../../../fw_development_tools
VPROCDIR = ${FWDEVTOOLS}/verification/vproc
# Name of gnu-make executable
MAKE_EXE = mingw32-make
MAKE_EXE = mingw32-make
VSIMEXE = ${MODELSIMDIR}\\win32aloem\\vsim
VSIMEXEAUX = ${MODELSIMDIRAUX}\\win32aloem\\vsim
AUTOSCRIPT = autogen.bat
CMDSHELL = cmd /c
# Pick single target files for two auto-generations---UUT and test.
# Pick single target files for two auto-generations---UUT and test.
# The core.h file is always presentfor the UUT, and the test package
# for the test bench
TBAUTOFILE = test_pkg_auto.vhd
JSONFILES = doc/*.json
JSONFILES = doc/*.json ../doc/*.json
# If no external code directory (e.g. a HAL) set this to local source directory, else set to code directory
EXTINCLDIR = ${CURDIR}/src
# Add -DVPROC_VHDL to this variable if using the VHDL models for VProc and memory model
HALCOPTS = -DVPROC_VHDL
VSIMARGS =
VSIMARGS =
#------------------------------------------------------
# BUILD RULES
#------------------------------------------------------
# Build is dependant on generating the auto-gen file and
# Build is dependant on generating the auto-gen file and
# processing makefile in vproc
all: ${TBAUTOFILE} vproc
# Make test bench auto-gen code dependant on all the JSON files to
# Make test bench auto-gen code dependant on all the JSON files to
# call the batch file if any have changed
${TBAUTOFILE}: ${JSONFILES}
@cmd /c autogen.bat
@${CMDSHELL} ${AUTOSCRIPT}
# Call the vproc make file for it to determine if anything
# needs building.
.PHONY : vproc
vproc:
@${MAKE_EXE} -C ${VPROCDIR} \
TESTDIR=${CURDIR} \
USER_C="${USERCODE}" \
MODELSIMDIR="${MODELSIMDIR}" \
EXTINCLDIR="${EXTINCLDIR}" \
HALCOPTS="${HALCOPTS}"
TESTDIR=${CURDIR} \
USER_C="${USERCODE}" \
MODELSIMDIR="${MODELSIMDIR}" \
EXTINCLDIR="${EXTINCLDIR}" \
HALCOPTS="${HALCOPTS}"
#------------------------------------------------------
# EXECUTION RULES
#------------------------------------------------------
run: all
@${MODELSIMDIR}\win32aloem\vsim -c -do sim.do ${VSIMARGS}
@${VSIMEXE} -c -do sim.do ${VSIMARGS}
rungui: all
@${MODELSIMDIR}\\win32aloem\\vsim -gui -do simg.do ${VSIMARGS}
@${VSIMEXE} -gui -do simg.do ${VSIMARGS}
runlog: all
@awk -F" " '/add wave/{print "log " $$NF}' < wave.do > batch.do
@${VSIMEXE} -c -do simlog.do ${VSIMARGS}
runfree: all
@awk -F" " '/add wave/{print "log " $$NF}' < wave.do > batch.do
@${VSIMEXEAUX} -c -do simlog.do ${VSIMARGS}
compile:
@${MODELSIMDIR}\\win32aloem\\vsim -c -do compile.do -do quit
@${VSIMEXE} -c -do compile.do -do quit
waves:
@${VSIMEXEAUX} -view vsim.wlf -do wave.do
autobuild:
@${CMDSHELL} ${AUTOSCRIPT}
gui: rungui
sim: run
log: runlog
free: runfree
help:
@echo "make help Display this message"
@echo "make Build C/C++ code without running simulation"
@echo "make compile Build HDL code without running simulation"
@echo "make autobuild Build auto-generated code without running simulation"
@echo "make run/sim Build and run batch simulation"
@echo "make rungui/gui Build and run GUI simulation"
@echo "make runlog/log Build and run batch simulation with signal logging"
@echo "make runfree/free Build and run batch simulation with signal logging on free starter ModelSim"
@echo "make waves Run wave view in free starter ModelSim (to view runlog/runfree signals)"
#------------------------------------------------------
# CLEANING RULES
#------------------------------------------------------

View file

@ -0,0 +1,774 @@
/**************************************************************/
/* runTest.cpp Date: 2019/09/03 */
/* */
/* Copyright (c) 2019 GIS. All rights reserved. */
/* */
/**************************************************************/
#include <stdio.h>
#include "tb.h"
#include "runTest.h"
#include "utils.h"
extern "C" {
#include "VUser.h"
}
// --------------------------------------------------
// Test code
// --------------------------------------------------
int runTest::start(int node)
{
int error = 0;
// ------------------------------------
// Create a test bench object for local
// TB register access.
CTestAuto* pTestBench = new CTestAuto((uint32_t*)(0));
clkFreqMHz = pTestBench->pConfig->GetClkFreq();
i2cFreqKHz = pTestBench->pConfig->GetI2cFreq();
testLvds = pTestBench->pConfig->GetTestLvds();
VPrint("\nNODE%d: Starting main tests...\n", node);
VPrint("NODE%d: Configuration: clkFreqMHz=%d i2cFreqKHz=%d testLvds=%d\n", node, clkFreqMHz, i2cFreqKHz, testLvds ? 1 : 0);
// Run all the tests
error |= i2c_if_test (pTestBench);
//error |= therm_trip_test (pTestBench);
//error |= therm_trip_rst_test (pTestBench);
//error |= therm_trip_reset_level_test (pTestBench);
//error |= shutdn_trip_test (pTestBench);
//error |= shutdn_en_dly_test (pTestBench);
//error |= watchdog_test (pTestBench);
// Only test the LVDS data path if enabled in the TB configuration.
// This test should be last as it enable sthe LVDS clocking which slows
// the simulator down and the other tests do not need this.
//if (testLvds)
//{
//error |= serdes_test (pTestBench);
//}
// Return status to calling function
return error ? TEST_ERROR : NOERROR;
}
// --------------------------------------------------
// SERDES test
// --------------------------------------------------
//uint32_t runTest::serdes_test (CTestAuto* pTestBench)
//{
//uint32_t error = 0;
//uint32_t data;
//bool seen_error = false;
//VPrint(" Starting LVDS SERDES tests\n");
//// Enable the LVDS clock
//pTestBench->pLvdsClkEn->SetLvdsClkEn(1);
//nsleepSim(300);
//for (int idx = 0; idx < 88; idx++)
//{
//// Each 19th bit in the data out is intercepted
//// and a clock placed on the bit so skip
//if ((idx % 22) == 18)
//continue;
//// Set bit on LVDS parallel busy
//switch(idx / 32)
//{
//case 0 : pTestBench->pLvdsTxParLo->SetLvdsTxParLo ((1 << (idx % 32))); break;
//case 1 : pTestBench->pLvdsTxParMid->SetLvdsTxParMid((1 << (idx % 32))); break;
//case 2 : pTestBench->pLvdsTxParHi->SetLvdsTxParHi ((1 << (idx % 32))); break;
//}
//// Allow the data to propogate through the LVDS SERDES chain.
//nsleepSim(250);
//for (int jdx = 0; jdx < 3; jdx ++)
//{
//// Read all d_out bits and check only lvds input set bit is 1
//switch(jdx)
//{
//case 0 : data = pTestBench->pDOutLo->GetDOutLo () ; break;
//case 1 : data = pTestBench->pDOutMid->GetDOutMid(); break;
//case 2 : data = pTestBench->pDOutHi->GetDOutHi (); break;
//}
//uint32_t exp = ((idx /32) == jdx) ? ( 1 << (idx % 32)) : 0;
//if (data != exp)
//{
//if (!seen_error)
//{
//VPrint("**ERROR 500: d_out status for bit %d at word %d. (got 0x%08x, exp 0x%08x)\n", idx, jdx, data, exp);
//error |= 1;
//}
//}
//}
//seen_error = error;
//// Clear bit
//switch(idx / 32)
//{
//case 0 : pTestBench->pLvdsTxParLo->SetLvdsTxParLo (0); break;
//case 1 : pTestBench->pLvdsTxParMid->SetLvdsTxParMid(0); break;
//case 2 : pTestBench->pLvdsTxParHi->SetLvdsTxParHi (0); break;
//}
//}
//return error;
//}
// --------------------------------------------------
// Watchdog test
// --------------------------------------------------
//uint32_t runTest::watchdog_test(CTestAuto* pTestBench)
//{
//uint32_t error = 0;
//uint32_t data;
//uint32_t status;
//VPrint(" Starting watchdog tests\n");
//// Enable and Clear
//i2cWrite(I2C_ADDR_WD_CTRL, WD_DEFAULT_PERIOD | WD_EN | WD_CLR, pTestBench);
//// Check it didn't fire
//i2cRead(I2C_ADDR_WD_STATUS, data, pTestBench);
//if (data)
//{
//VPrint("**ERROR 400: Bad watchdog status. (got 0x%02d, exp 0x%02d)\n", data, 0);
//error |= 1;
//}
//// Clear
//i2cWrite(I2C_ADDR_WD_CTRL, WD_DEFAULT_PERIOD | WD_EN | WD_CLR, pTestBench);
//// Wait for past firing time
//nsleepSim(10100);
//// Check it fired
//i2cRead(I2C_ADDR_WD_STATUS, data, pTestBench);
//if (data != 1)
//{
//VPrint("**ERROR 401: Bad watchdog status. (got 0x%02d, exp 0x%02d)\n", data, 1);
//error |= 1;
//}
//// Check shutdown in TB status is set
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status == 0)
//{
//VPrint("**ERROR 402: bad test bench trip status for watchdog. (got 0x%02d, exp 0x%02d)\n", status, 1);
//error |= 1;
//}
//// Disable watchdog
//i2cWrite(I2C_ADDR_WD_CTRL, WD_DEFAULT_PERIOD, pTestBench);
//// Check cleared
//i2cRead(I2C_ADDR_WD_STATUS, data, pTestBench);
//if (data)
//{
//VPrint("**ERROR 403: Bad watchdog status. (got 0x%02d, exp 0x%02d)\n", data, 0);
//error |= 1;
//}
//// Check shutdown deasserted
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status != 0)
//{
//VPrint("**ERROR 404: bad test bench trip status for watchdog. (got 0x%02d, exp 0x%02d)\n", status, 1);
//error |= 1;
//}
//return error;
//}
//// --------------------------------------------------
// Thermal trip test
// --------------------------------------------------
//uint32_t runTest::therm_trip_rst_test(CTestAuto* pTestBench)
//{
//int error = 0;
//VPrint(" Starting thermal trip reset tests\n");
//for (int head = 0; head < 4; head++)
//{
//// Clear therm_trip_rst_count in TB
//pTestBench->pClrThermRstCount->SetClrThermRstCount(1);
//uint32_t monBaseSpacing = I2C_ADDR_MON_BASE_H1 - I2C_ADDR_MON_BASE_H0;
//// Write to the I2C register in given head's monitor
//i2cWrite(I2C_ADDR_MON_BASE_H0 + head*monBaseSpacing + MON_THERM_EN_OFFSET, 1, pTestBench);
//nsleepSim(200);
//// Read the count
//uint32_t count = pTestBench->pThermRstCount->GetThermRstCount();
//if (count != 7)
//{
//VPrint("**ERROR 200: bad thermal trip reset count for head %d. (got 0x%02d, exp 0x%02d)\n", head, count, 7);
//error |= 1;
//}
//}
//return error;
//}
// --------------------------------------------------
// Thermistor fault trip reset level test
// --------------------------------------------------
//uint32_t runTest::therm_trip_reset_level_test(CTestAuto* pTestBench)
//{
//int error = 0;
//uint32_t status = 0;
//uint32_t target = 0;
//VPrint(" Starting thermistor fault trip reset level set tests\n");
//for (int head = 0; head < 4; head++)
//{
//target = 0;
//status = pTestBench->pThermTripResetStatus->GetThermTripResetStatus();
//if (status != target)
//{
//VPrint("**ERROR 700: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, status, target);
//error |= 1;
//}
//uint32_t monBaseSpacing = I2C_ADDR_MON_BASE_H1 - I2C_ADDR_MON_BASE_H0;
//// Write to the I2C register in given head's monitor
//// set it to 1
//target = 1;
//i2cWrite(I2C_ADDR_MON_BASE_H0 + head*monBaseSpacing + MON_THERM_TRIP_RESET_LEVEL_OFFSET, target, pTestBench);
//nsleepSim(200);
//// Read the status
//status = pTestBench->pThermTripResetStatus->GetThermTripResetStatus();
//if (target != status)
//{
//VPrint("**ERROR 701: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, status, target);
//error |= 1;
//}
//// Write to the I2C register in given head's monitor
//// set it to 1 again
//target = 1;
//i2cWrite(I2C_ADDR_MON_BASE_H0 + head*monBaseSpacing + MON_THERM_TRIP_RESET_LEVEL_OFFSET, target, pTestBench);
//nsleepSim(200);
//// Read the status
//status = pTestBench->pThermTripResetStatus->GetThermTripResetStatus();
//if (target != status)
//{
//VPrint("**ERROR 702: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, status, target);
//error |= 1;
//}
//// Write to the I2C register in given head's monitor
//// set it to 0
//target = 0;
//i2cWrite(I2C_ADDR_MON_BASE_H0 + head*monBaseSpacing + MON_THERM_TRIP_RESET_LEVEL_OFFSET, target, pTestBench);
//nsleepSim(200);
//// Read the status
//status = pTestBench->pThermTripResetStatus->GetThermTripResetStatus();
//if (target != status)
//{
//VPrint("**ERROR 703: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, status, target);
//error |= 1;
//}
//// Write to the I2C register in given head's monitor
//// set it to 0 again
//target = 0;
//i2cWrite(I2C_ADDR_MON_BASE_H0 + head*monBaseSpacing + MON_THERM_TRIP_RESET_LEVEL_OFFSET, target, pTestBench);
//nsleepSim(200);
//// Read the status
//status = pTestBench->pThermTripResetStatus->GetThermTripResetStatus();
//if (target != status)
//{
//VPrint("**ERROR 704: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, status, target);
//error |= 1;
//}
//}
//return error;
//}
// -------------------------------------------------
// Shutdown enable delay test
// -------------------------------------------------
//uint32_t runTest::shutdn_en_dly_test (CTestAuto* pTestBench)
//{
//int error = 0;
//uint32_t status;
//uint32_t data;
//VPrint(" Starting shutdown trip enable delay tests\n");
//// Disable all shutdowns
//for (int head = 0; head < 4; head++)
//{
//i2cWrite(I2C_ADDR_SHUT_CLR0 + head, 0xff, pTestBench);
//}
//// Set a 1ms delay
//uint32_t delay1msTicks = 100000;
//i2cWrite(I2C_ADDR_SHUT_DLY_LO, (delay1msTicks >> 0) & 0xff, pTestBench);
//i2cWrite(I2C_ADDR_SHUT_DLY_MID, (delay1msTicks >> 8) & 0xff, pTestBench);
//i2cWrite(I2C_ADDR_SHUT_DLY_HI, (delay1msTicks >> 16) & 0xff, pTestBench);
//// Set a new shutdown enable
//i2cWrite(I2C_ADDR_SHUT_EN_H0, 1, pTestBench);
//// Check no shutdown
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status)
//{
//VPrint("**ERROR 600: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", 0, status, 0);
//error |= 1;
//}
//// Set go
//i2cWrite(I2C_ADDR_SHUT_GO, 1, pTestBench);
//// Wait for 0.5ms
//usleepSim(500);
//// Set a trip on the input
//pTestBench->pTrip->SetShutdnH0(1);
//// check no shutdown
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status)
//{
//VPrint("**ERROR 601: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", 0, status, 0);
//error |= 1;
//}
//// Wait for 0.5ms
//usleepSim(500);
//// Set a trip on the input
//pTestBench->pTrip->SetShutdnH0(1);
//// Check for shutdown
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status == 0)
//{
//VPrint("**ERROR 602: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d, trip 0x%x)\n", 0, status, 1, 0);
//error |= 1;
//}
//// Clear enable
//i2cWrite(I2C_ADDR_SHUT_CLR0, 1, pTestBench);
//// Clear shutdown status
//i2cWrite(I2C_ADDR_MON_BASE_H0 + MON_SHUTDN_CLR_OFFSET, 1, pTestBench);
//// Set a trip on the input
//pTestBench->pTrip->SetShutdnH0(1);
//// Check no shutdown
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status)
//{
//VPrint("**ERROR 603: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", 0, status, 0);
//error |= 1;
//}
//// Clear the new shutdown enable
//i2cWrite(I2C_ADDR_SHUT_EN_H0, 0, pTestBench);
//// Set go
//i2cWrite(I2C_ADDR_SHUT_GO, 1, pTestBench);
//// Wait for > 1 ms
//usleepSim(1100);
//// Set again the trip input
//pTestBench->pTrip->SetShutdnH0(1);
//// Check no shutdown.
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status)
//{
//VPrint("**ERROR 604: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", 0, status, 0);
//error |= 1;
//}
//// Set delay to 0 once more
//i2cWrite(I2C_ADDR_SHUT_DLY_LO, 0, pTestBench);
//i2cWrite(I2C_ADDR_SHUT_DLY_MID, 0, pTestBench);
//i2cWrite(I2C_ADDR_SHUT_DLY_HI, 0, pTestBench);
//return error;
//}
// -------------------------------------------------
// Shutdown trip test
// -------------------------------------------------
////uint32_t runTest::shutdn_trip_test (CTestAuto* pTestBench)
//{
//int error = 0;
//uint32_t status;
//uint32_t data;
//VPrint(" Starting shutdown trip tests\n");
//uint32_t monBaseSpacing = I2C_ADDR_MON_BASE_H1 - I2C_ADDR_MON_BASE_H0;
//// Mask all shutdown trips over I2C
//for (int head = 0; head < 4; head++)
//{
//i2cWrite(I2C_ADDR_SHUT_CLR0 + head, 0xff, pTestBench);
//}
//// run through each trip
//for (int head = 0; head < NUM_HEADS; head++)
//{
//for (int trip = 0; trip < TRIPS_PER_HEAD; trip++)
//{
//// Set TB trip bit
//switch(head)
//{
//case 0: pTestBench->pTrip->SetShutdnH0(1 << trip); break;
//case 1: pTestBench->pTrip->SetShutdnH1(1 << trip); break;
//case 2: pTestBench->pTrip->SetShutdnH2(1 << trip); break;
//case 3: pTestBench->pTrip->SetShutdnH3(1 << trip); break;
//default: null; break;
//}
//// Check no shutdown in TB status
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status)
//{
//VPrint("**ERROR 300: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, status, 0);
//error |= 1;
//}
//// Check no shutdown in I2C registers for all heads
//for (int idx = 0; idx < NUM_HEADS; idx++)
//{
//i2cRead(I2C_ADDR_MON_BASE_H0 + monBaseSpacing*idx + MON_SHUTDN_TRIP_OFFSET, data, pTestBench);
//uint32_t exp = 0;
//if (data != exp)
//{
//VPrint("**ERROR 301: bad i2c trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, data, exp);
//error |= 1;
//}
//}
//// Enable trip bit for this head
//i2cWrite(I2C_ADDR_SHUT_EN_H0 + head, (1 << (trip+1)) - 1, pTestBench);
//i2cWrite(I2C_ADDR_SHUT_GO, 1, pTestBench);
//// Set TB trip bit
//switch(head)
//{
//case 0: pTestBench->pTrip->SetShutdnH0(1 << trip); break;
//case 1: pTestBench->pTrip->SetShutdnH1(1 << trip); break;
//case 2: pTestBench->pTrip->SetShutdnH2(1 << trip); break;
//case 3: pTestBench->pTrip->SetShutdnH3(1 << trip); break;
//default: null; break;
//}
//// Check shutdown in TB status is set
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status == 0)
//{
//VPrint("**ERROR 302: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d, trip 0x%x)\n", head, status, 1, trip);
//error |= 1;
//}
//// Check shutdown statuses over I2C with only expected bit set for given head
//for (int idx = 0; idx < NUM_HEADS; idx++)
//{
//// Check no shutdown in I2C registers for all heads
//i2cRead(I2C_ADDR_MON_BASE_H0 + monBaseSpacing*idx + MON_SHUTDN_TRIP_OFFSET, data, pTestBench);
//uint32_t exp = (head == idx) ? (1 << trip) : 0;
//if (data != exp)
//{
//VPrint("**ERROR 303: bad i2c trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, data, exp);
//error |= 1;
//}
//}
//// Clear shutdown over I2C
//i2cWrite(I2C_ADDR_MON_BASE_H0 + monBaseSpacing*head + MON_SHUTDN_CLR_OFFSET, (1 << trip), pTestBench);
//// Check no shutdown in TB status
//status = pTestBench->pShutdownStatus->GetShutdownStatus();
//if (status)
//{
//VPrint("**ERROR 304: bad test bench trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, status, 0);
//error |= 1;
//}
//// Check no shutdown in I2C registers for all heads
//for (int idx = 0; idx < NUM_HEADS; idx++)
//{
//i2cRead(I2C_ADDR_MON_BASE_H0 + monBaseSpacing*idx + MON_SHUTDN_TRIP_OFFSET, data, pTestBench);
//uint32_t exp = 0;
//if (data != exp)
//{
//VPrint("**ERROR 305: bad i2c trip status for head %d. (got 0x%02d, exp 0x%02d)\n", head, data, exp);
//error |= 1;
//}
//}
//}
//}
//return error;
//}
// -------------------------------------------------
// Thermal trip test
// -------------------------------------------------
//uint32_t runTest::therm_trip_test(CTestAuto* pTestBench)
//{
//int error = 0;
//uint32_t data;
//VPrint(" Starting thermal trip tests\n");
//// Test the head thermal trips
//for (int head = 0; head < NUM_HEADS; head++)
//{
//for (int bit = 0; bit < 3; bit++)
//{
//// Set therm value in TB for given head
//switch(head)
//{
//case 0: pTestBench->pTrip->SetThermH0(1 << bit); break;
//case 1: pTestBench->pTrip->SetThermH1(1 << bit); break;
//case 2: pTestBench->pTrip->SetThermH2(1 << bit); break;
//case 3: pTestBench->pTrip->SetThermH3(1 << bit); break;
//default: null; break;
//}
//uint32_t monBaseSpacing = I2C_ADDR_MON_BASE_H1 - I2C_ADDR_MON_BASE_H0;
//// Read back the value over I2C
//i2cRead(I2C_ADDR_MON_BASE_H0 + monBaseSpacing*head + MON_THERM_TRIP_OFFSET, data, pTestBench);
//if (data != (1 << bit))
//{
//VPrint("**ERROR 100: bad head thermal trip data for head %d. (got 0x%02x, exp 0x%02x)\n", head, data, (1 << bit));
//error |= 1;
//}
//// Set therm value back to 0 in TB for given head
//switch(head)
//{
//case 0: pTestBench->pTrip->SetThermH0(0); break;
//case 1: pTestBench->pTrip->SetThermH1(0); break;
//case 2: pTestBench->pTrip->SetThermH2(0); break;
//case 3: pTestBench->pTrip->SetThermH3(0); break;
//default: null; break;
//}
//}
//}
//return error;
//}
// -------------------------------------------------
// I2C test
// -------------------------------------------------
uint32_t runTest::i2c_if_test(CTestAuto* pTestBench)
{
int error = 0;
uint32_t data;
VPrint(" Starting i2c interface tests\n");
// Write to scratch register 0
i2cWrite(I2C_ADDR_SCRATCH0, TEST_BYTE0, pTestBench);
if (pTestBench->pI2cStatus->GetAckError() != 0)
{
VPrint("**ERROR 000: Bad ACK status after data write\n");
error = 1;
}
// Write to scratch register 1
i2cWrite(I2C_ADDR_SCRATCH1, TEST_BYTE1, pTestBench);
if (pTestBench->pI2cStatus->GetAckError() != 0)
{
VPrint("**ERROR 001: Bad ACK status after data write\n");
error = 1;
}
// Read scratch register 0 value back
i2cRead(I2C_ADDR_SCRATCH0, data, pTestBench);
if (pTestBench->pI2cStatus->GetAckError() != 0)
{
VPrint("**ERROR 002: Bad ACK status after data read\n");
error = 1;
}
if (data != TEST_BYTE0)
{
VPrint("**ERROR 003 : bad byte read from scratch 0 register (got 0x%02x exp 0x%02x)\n", data, TEST_BYTE0);
error = 1;
}
// Read scratch register 1 back
i2cRead(I2C_ADDR_SCRATCH1, data, pTestBench);
if (pTestBench->pI2cStatus->GetAckError() != 0)
{
VPrint("**ERROR 003: Bad ACK status after data read\n");
error = 1;
}
if (data != TEST_BYTE1)
{
VPrint("**ERROR 004 : bad byte read from scratch 1 register (got 0x%02x exp 0x%02x)\n", data, TEST_BYTE1);
error = 1;
}
// Read IP_ID Value
i2cRead(I2C_ADDR_IP_ID, data, pTestBench);
if (pTestBench->pI2cStatus->GetAckError() != 0)
{
VPrint("**ERROR 005: Bad ACK status after data read\n");
error = 1;
}
if (data != 0x29)
{
VPrint("**ERROR 006 : Bad IP ID read from register (got 0x%02x exp 0x%02x)\n", data, 0x29);
error = 1;
}
// Read IP_VER Value
i2cRead(I2C_ADDR_IP_VER, data, pTestBench);
if (pTestBench->pI2cStatus->GetAckError() != 0)
{
VPrint("**ERROR 007: Bad ACK status after data read\n");
error = 1;
}
if (data != 0x02)
{
VPrint("**ERROR 008 : Bad IP VER read from register (got 0x%02x exp 0x%02x)\n", data, 0x01);
error = 1;
}
// Set the debug LEDs to CPU control and set a value
i2cWrite(I2C_ADDR_DBG_LED, (TEST_BYTE2 << 1) | 1, pTestBench);
// Read the TB LED status
data = pTestBench->pDbgLedStatus->GetDbgLedStatus();
if (data != TEST_BYTE2)
{
VPrint("**ERROR 009 : bad debug LED status (got 0x%02x exp 0x%02x)\n", data, TEST_BYTE2);
error = 1;
}
return error;
}
// --------------------------------------------------
// I2C write method
// --------------------------------------------------
uint32_t runTest::i2cWrite (uint32_t hmb_addr, uint32_t data, CTestAuto* pTestBench)
{
csrWriteMem(CSR_TEST_I2C_MASTER | (SLAVE_I2C_ADDR << 2), ((hmb_addr & 0xff00) >> 8) | ((hmb_addr & 0xff) << 8) | ((data & 0xff) << 16));
// Wait until we've seen busy go high to indicate transaction excepted
while (pTestBench->pI2cStatus->GetBusy() == 0)
usleepSim(1);
// Wait until we've seen busy go low at the end of the transaction
while (pTestBench->pI2cStatus->GetBusy() == 1)
usleepSim(1);
return 0;
}
// --------------------------------------------------
// I2C read method
// --------------------------------------------------
uint32_t runTest::i2cRead(uint32_t hmb_addr, uint32_t &data, CTestAuto* pTestBench)
{
csrWriteMem(CSR_TEST_I2C_MASTER | ((CMD_READ_OFFSET | SLAVE_I2C_ADDR) << 2), ((hmb_addr & 0xff00) >> 8) | ((hmb_addr & 0xff) << 8));
// Wait until we've seen busy go high to indicate transaction excepted
while (pTestBench->pI2cStatus->GetBusy() == 0)
usleepSim(1);
// Wait until we've seen busy go low at the end of the transaction
while (pTestBench->pI2cStatus->GetBusy() == 1)
usleepSim(1);
uint32_t rd_data;
csrReadMem(CSR_TEST_I2C_MASTER | ((CMD_READ_OFFSET | SLAVE_I2C_ADDR) << 2), &rd_data);
data = rd_data;
return 0;
}

View file

@ -0,0 +1,58 @@
/**************************************************************/
/* runTest.h Date: 2018/08/9 */
/* */
/* Copyright (c) 2018 GIS. All rights reserved. */
/* */
/**************************************************************/
#ifndef _READTEST_H_
#define _READTEST_H_
#ifdef HDL_SIM
#include "VUserMain0.h"
// Memory model API has C linkage functions
extern "C" {
#include "mem_model.h"
#include "VUser.h"
}
#else
#error No co-simulation support as yet
#endif
#include "runTestLocal.h"
class runTest
{
public:
// Constructor
runTest()
{
};
// Entry method for running the tests
int start (int node);
private:
uint32_t i2c_if_test (CTestAuto* pTestBench);
//uint32_t therm_trip_test (CTestAuto* pTestBench);
//uint32_t therm_trip_rst_test (CTestAuto* pTestBench);
//uint32_t therm_trip_reset_level_test(CTestAuto* pTestBench);
//uint32_t shutdn_trip_test (CTestAuto* pTestBench);
//uint32_t shutdn_en_dly_test (CTestAuto* pTestBench);
//uint32_t watchdog_test (CTestAuto* pTestBench);
//uint32_t serdes_test (CTestAuto* pTestBench);
uint32_t i2cWrite (uint32_t addr, uint32_t data, CTestAuto* pTestBench);
uint32_t i2cRead(uint32_t hmb_addr, uint32_t &data, CTestAuto* pTestBench);
bool testLvds;
uint32_t clkFreqMHz;
uint32_t i2cFreqKHz;
};
#endif

View file

@ -0,0 +1,65 @@
/**************************************************************/
/* runTest.h Date: 2018/08/9 */
/* */
/* Copyright (c) 2018 GIS. All rights reserved. */
/* */
/**************************************************************/
#ifndef _READTEST_LOCAL_H_
#define _READTEST_LOCAL_H_
// Include top level HAL header
#include "hal/CTestAuto.h"
#include "hal/hmb_fpga.h"
#define CMD_READ_OFFSET 0x80
#define SLAVE_I2C_ADDR 0x39
#define TEST_BYTE0 0x55
#define TEST_BYTE1 0xaa
#define TEST_BYTE2 0x13
#define NUM_HEADS 4
#define TRIPS_PER_HEAD 5
#define TOTAL_NUM_TRIPS (NUM_HEADS * TRIPS_PER_HEAD)
#define I2C_ADDR_SCRATCH0 (CSR_HMB_FPGA_SCRATCH0/4)
#define I2C_ADDR_SCRATCH1 (CSR_HMB_FPGA_SCRATCH1/4)
#define I2C_ADDR_IP_ID (CSR_HMB_FPGA_IP_ID/4)
#define I2C_ADDR_IP_VER (CSR_HMB_FPGA_IP_VER/4)
#define I2C_ADDR_DBG_LED (CSR_HMB_FPGA_CPU_DBG_LED/4)
#define I2C_ADDR_SHUT_EN_H0 (CSR_HMB_FPGA_SHUTDN_EN0/4)
#define I2C_ADDR_SHUT_EN_H1 (CSR_HMB_FPGA_SHUTDN_EN1/4)
#define I2C_ADDR_SHUT_EN_H2 (CSR_HMB_FPGA_SHUTDN_EN2/4)
#define I2C_ADDR_SHUT_EN_H3 (CSR_HMB_FPGA_SHUTDN_EN3/4)
#define I2C_ADDR_SHUT_DLY_LO (CSR_HMB_FPGA_SHUTDN_DLY_LO/4)
#define I2C_ADDR_SHUT_DLY_MID (CSR_HMB_FPGA_SHUTDN_DLY_MID/4)
#define I2C_ADDR_SHUT_DLY_HI (CSR_HMB_FPGA_SHUTDN_DLY_HI/4)
#define I2C_ADDR_SHUT_GO (CSR_HMB_FPGA_SHUTDN_GO/4)
#define I2C_ADDR_WD_CTRL (CSR_HMB_FPGA_WD_CTRL/4)
#define I2C_ADDR_WD_STATUS (CSR_HMB_FPGA_WD_STATUS/4)
#define I2C_ADDR_SHUT_CLR0 (CSR_HMB_FPGA_SHUTDN_CLR0/4)
#define I2C_ADDR_SHUT_CLR1 (CSR_HMB_FPGA_SHUTDN_CLR1/4)
#define I2C_ADDR_SHUT_CLR2 (CSR_HMB_FPGA_SHUTDN_CLR2/4)
#define I2C_ADDR_SHUT_CLR3 (CSR_HMB_FPGA_SHUTDN_CLR3/4)
#define WD_CLR CSR_HMB_FPGA_WD_CTRL_CLR_MASK
#define WD_EN CSR_HMB_FPGA_WD_CTRL_EN_MASK
#define WD_PERIOD_LO_BIT CSR_HMB_FPGA_WD_CTRL_PERIOD
#define WD_PERIOD_MASK CSR_HMB_FPGA_WD_CTRL_PERIOD_MASK;
#define I2C_ADDR_MON_BASE_H0 (CSR_HMB_FPGA_MONITOR_0/4)
#define I2C_ADDR_MON_BASE_H1 (CSR_HMB_FPGA_MONITOR_1/4)
#define I2C_ADDR_MON_BASE_H2 (CSR_HMB_FPGA_MONITOR_2/4)
#define I2C_ADDR_MON_BASE_H3 (CSR_HMB_FPGA_MONITOR_3/4)
#define MON_THERM_EN_OFFSET 0x0000
#define MON_THERM_TRIP_OFFSET 0x0001
#define MON_SHUTDN_CLR_OFFSET 0x0002
#define MON_SHUTDN_TRIP_OFFSET 0x0003
#define MON_THERM_TRIP_RESET_LEVEL_OFFSET 0X0004
#define WD_DEFAULT_PERIOD (0xF << WD_PERIOD_LO_BIT)
#endif

1
firmware/make el-gip.bat Normal file
View file

@ -0,0 +1 @@
mklink /j generic_ip d:\git\EL-GENERIC-IP\generic_ip

View file

@ -0,0 +1,6 @@
set_global_assignment -name IP_TOOL_NAME "ALTDDIO_IN"
set_global_assignment -name IP_TOOL_VERSION "19.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "ddio_in.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "ddio_in.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "ddio_in.ppf"]

View file

@ -0,0 +1,113 @@
-- megafunction wizard: %ALTDDIO_IN%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: ALTDDIO_IN
-- ============================================================
-- File Name: ddio_in.vhd
-- Megafunction Name(s):
-- ALTDDIO_IN
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 19.1.0 Build 670 09/22/2019 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2019 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.altera_mf_components.all;
ENTITY ddio_in IS
PORT
(
aclr : IN STD_LOGIC ;
datain : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
inclock : IN STD_LOGIC ;
dataout_h : OUT STD_LOGIC_VECTOR (0 DOWNTO 0);
dataout_l : OUT STD_LOGIC_VECTOR (0 DOWNTO 0)
);
END ddio_in;
ARCHITECTURE SYN OF ddio_in IS
SIGNAL sub_wire0 : STD_LOGIC_VECTOR (0 DOWNTO 0);
SIGNAL sub_wire1 : STD_LOGIC_VECTOR (0 DOWNTO 0);
BEGIN
dataout_h <= sub_wire0(0 DOWNTO 0);
dataout_l <= sub_wire1(0 DOWNTO 0);
ALTDDIO_IN_component : ALTDDIO_IN
GENERIC MAP (
intended_device_family => "Cyclone 10 LP",
invert_input_clocks => "OFF",
lpm_hint => "UNUSED",
lpm_type => "altddio_in",
power_up_high => "OFF",
width => 1
)
PORT MAP (
aclr => aclr,
datain => datain,
inclock => inclock,
dataout_h => sub_wire0,
dataout_l => sub_wire1
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: INVERT_INPUT_CLOCKS STRING "OFF"
-- Retrieval info: CONSTANT: LPM_HINT STRING "UNUSED"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altddio_in"
-- Retrieval info: CONSTANT: POWER_UP_HIGH STRING "OFF"
-- Retrieval info: CONSTANT: WIDTH NUMERIC "1"
-- Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT NODEFVAL "aclr"
-- Retrieval info: CONNECT: @aclr 0 0 0 0 aclr 0 0 0 0
-- Retrieval info: USED_PORT: datain 0 0 1 0 INPUT NODEFVAL "datain[0..0]"
-- Retrieval info: CONNECT: @datain 0 0 1 0 datain 0 0 1 0
-- Retrieval info: USED_PORT: dataout_h 0 0 1 0 OUTPUT NODEFVAL "dataout_h[0..0]"
-- Retrieval info: CONNECT: dataout_h 0 0 1 0 @dataout_h 0 0 1 0
-- Retrieval info: USED_PORT: dataout_l 0 0 1 0 OUTPUT NODEFVAL "dataout_l[0..0]"
-- Retrieval info: CONNECT: dataout_l 0 0 1 0 @dataout_l 0 0 1 0
-- Retrieval info: USED_PORT: inclock 0 0 0 0 INPUT_CLK_EXT NODEFVAL "inclock"
-- Retrieval info: CONNECT: @inclock 0 0 0 0 inclock 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_in.vhd TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_in.qip TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_in.bsf FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_in_inst.vhd FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_in.inc FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_in.cmp TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_in.ppf TRUE FALSE
-- Retrieval info: LIB_FILE: altera_mf

View file

@ -0,0 +1,6 @@
set_global_assignment -name IP_TOOL_NAME "ALTDDIO_OUT"
set_global_assignment -name IP_TOOL_VERSION "19.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "ddio_out.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "ddio_out.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "ddio_out.ppf"]

View file

@ -0,0 +1,115 @@
-- megafunction wizard: %ALTDDIO_OUT%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: ALTDDIO_OUT
-- ============================================================
-- File Name: ddio_out.vhd
-- Megafunction Name(s):
-- ALTDDIO_OUT
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 19.1.0 Build 670 09/22/2019 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2019 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.altera_mf_components.all;
ENTITY ddio_out IS
PORT
(
aclr : IN STD_LOGIC ;
datain_h : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
datain_l : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
outclock : IN STD_LOGIC ;
dataout : OUT STD_LOGIC_VECTOR (0 DOWNTO 0)
);
END ddio_out;
ARCHITECTURE SYN OF ddio_out IS
SIGNAL sub_wire0 : STD_LOGIC_VECTOR (0 DOWNTO 0);
BEGIN
dataout <= sub_wire0(0 DOWNTO 0);
ALTDDIO_OUT_component : ALTDDIO_OUT
GENERIC MAP (
extend_oe_disable => "OFF",
intended_device_family => "Cyclone 10 LP",
invert_output => "OFF",
lpm_hint => "UNUSED",
lpm_type => "altddio_out",
oe_reg => "UNREGISTERED",
power_up_high => "OFF",
width => 1
)
PORT MAP (
aclr => aclr,
datain_h => datain_h,
datain_l => datain_l,
outclock => outclock,
dataout => sub_wire0
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: EXTEND_OE_DISABLE STRING "OFF"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: INVERT_OUTPUT STRING "OFF"
-- Retrieval info: CONSTANT: LPM_HINT STRING "UNUSED"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altddio_out"
-- Retrieval info: CONSTANT: OE_REG STRING "UNREGISTERED"
-- Retrieval info: CONSTANT: POWER_UP_HIGH STRING "OFF"
-- Retrieval info: CONSTANT: WIDTH NUMERIC "1"
-- Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT NODEFVAL "aclr"
-- Retrieval info: CONNECT: @aclr 0 0 0 0 aclr 0 0 0 0
-- Retrieval info: USED_PORT: datain_h 0 0 1 0 INPUT NODEFVAL "datain_h[0..0]"
-- Retrieval info: CONNECT: @datain_h 0 0 1 0 datain_h 0 0 1 0
-- Retrieval info: USED_PORT: datain_l 0 0 1 0 INPUT NODEFVAL "datain_l[0..0]"
-- Retrieval info: CONNECT: @datain_l 0 0 1 0 datain_l 0 0 1 0
-- Retrieval info: USED_PORT: dataout 0 0 1 0 OUTPUT NODEFVAL "dataout[0..0]"
-- Retrieval info: CONNECT: dataout 0 0 1 0 @dataout 0 0 1 0
-- Retrieval info: USED_PORT: outclock 0 0 0 0 INPUT_CLK_EXT NODEFVAL "outclock"
-- Retrieval info: CONNECT: @outclock 0 0 0 0 outclock 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_out.vhd TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_out.qip TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_out.bsf FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_out_inst.vhd FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_out.inc FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_out.cmp TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL ddio_out.ppf TRUE FALSE
-- Retrieval info: LIB_FILE: altera_mf

View file

@ -0,0 +1,32 @@
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
component fifo_v20
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
rdreq : IN STD_LOGIC ;
sclr : IN STD_LOGIC ;
wrreq : IN STD_LOGIC ;
almost_empty : OUT STD_LOGIC ;
almost_full : OUT STD_LOGIC ;
empty : OUT STD_LOGIC ;
full : OUT STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
usedw : OUT STD_LOGIC_VECTOR (8 DOWNTO 0)
);
end component;

View file

@ -0,0 +1,5 @@
set_global_assignment -name IP_TOOL_NAME "FIFO"
set_global_assignment -name IP_TOOL_VERSION "20.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "fifo_v20.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "fifo_v20.cmp"]

View file

@ -0,0 +1,218 @@
-- megafunction wizard: %FIFO%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: scfifo
-- ============================================================
-- File Name: fifo_v20.vhd
-- Megafunction Name(s):
-- scfifo
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 20.1.1 Build 720 11/11/2020 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.all;
ENTITY fifo_v20 IS
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
rdreq : IN STD_LOGIC ;
sclr : IN STD_LOGIC ;
wrreq : IN STD_LOGIC ;
almost_empty : OUT STD_LOGIC ;
almost_full : OUT STD_LOGIC ;
empty : OUT STD_LOGIC ;
full : OUT STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
usedw : OUT STD_LOGIC_VECTOR (8 DOWNTO 0)
);
END fifo_v20;
ARCHITECTURE SYN OF fifo_v20 IS
SIGNAL sub_wire0 : STD_LOGIC ;
SIGNAL sub_wire1 : STD_LOGIC ;
SIGNAL sub_wire2 : STD_LOGIC ;
SIGNAL sub_wire3 : STD_LOGIC ;
SIGNAL sub_wire4 : STD_LOGIC_VECTOR (7 DOWNTO 0);
SIGNAL sub_wire5 : STD_LOGIC_VECTOR (8 DOWNTO 0);
COMPONENT scfifo
GENERIC (
add_ram_output_register : STRING;
almost_empty_value : NATURAL;
almost_full_value : NATURAL;
intended_device_family : STRING;
lpm_numwords : NATURAL;
lpm_showahead : STRING;
lpm_type : STRING;
lpm_width : NATURAL;
lpm_widthu : NATURAL;
overflow_checking : STRING;
underflow_checking : STRING;
use_eab : STRING
);
PORT (
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
rdreq : IN STD_LOGIC ;
sclr : IN STD_LOGIC ;
wrreq : IN STD_LOGIC ;
almost_empty : OUT STD_LOGIC ;
almost_full : OUT STD_LOGIC ;
empty : OUT STD_LOGIC ;
full : OUT STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
usedw : OUT STD_LOGIC_VECTOR (8 DOWNTO 0)
);
END COMPONENT;
BEGIN
almost_empty <= sub_wire0;
almost_full <= sub_wire1;
empty <= sub_wire2;
full <= sub_wire3;
q <= sub_wire4(7 DOWNTO 0);
usedw <= sub_wire5(8 DOWNTO 0);
scfifo_component : scfifo
GENERIC MAP (
add_ram_output_register => "OFF",
almost_empty_value => 2,
almost_full_value => 509,
intended_device_family => "Cyclone 10 LP",
lpm_numwords => 512,
lpm_showahead => "OFF",
lpm_type => "scfifo",
lpm_width => 8,
lpm_widthu => 9,
overflow_checking => "ON",
underflow_checking => "ON",
use_eab => "ON"
)
PORT MAP (
clock => clock,
data => data,
rdreq => rdreq,
sclr => sclr,
wrreq => wrreq,
almost_empty => sub_wire0,
almost_full => sub_wire1,
empty => sub_wire2,
full => sub_wire3,
q => sub_wire4,
usedw => sub_wire5
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: AlmostEmpty NUMERIC "1"
-- Retrieval info: PRIVATE: AlmostEmptyThr NUMERIC "2"
-- Retrieval info: PRIVATE: AlmostFull NUMERIC "1"
-- Retrieval info: PRIVATE: AlmostFullThr NUMERIC "509"
-- Retrieval info: PRIVATE: CLOCKS_ARE_SYNCHRONIZED NUMERIC "1"
-- Retrieval info: PRIVATE: Clock NUMERIC "0"
-- Retrieval info: PRIVATE: Depth NUMERIC "512"
-- Retrieval info: PRIVATE: Empty NUMERIC "1"
-- Retrieval info: PRIVATE: Full NUMERIC "1"
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: PRIVATE: LE_BasedFIFO NUMERIC "0"
-- Retrieval info: PRIVATE: LegacyRREQ NUMERIC "1"
-- Retrieval info: PRIVATE: MAX_DEPTH_BY_9 NUMERIC "0"
-- Retrieval info: PRIVATE: OVERFLOW_CHECKING NUMERIC "0"
-- Retrieval info: PRIVATE: Optimize NUMERIC "2"
-- Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0"
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
-- Retrieval info: PRIVATE: UNDERFLOW_CHECKING NUMERIC "0"
-- Retrieval info: PRIVATE: UsedW NUMERIC "1"
-- Retrieval info: PRIVATE: Width NUMERIC "8"
-- Retrieval info: PRIVATE: dc_aclr NUMERIC "0"
-- Retrieval info: PRIVATE: diff_widths NUMERIC "1"
-- Retrieval info: PRIVATE: msb_usedw NUMERIC "1"
-- Retrieval info: PRIVATE: output_width NUMERIC "8"
-- Retrieval info: PRIVATE: rsEmpty NUMERIC "1"
-- Retrieval info: PRIVATE: rsFull NUMERIC "1"
-- Retrieval info: PRIVATE: rsUsedW NUMERIC "1"
-- Retrieval info: PRIVATE: sc_aclr NUMERIC "0"
-- Retrieval info: PRIVATE: sc_sclr NUMERIC "1"
-- Retrieval info: PRIVATE: wsEmpty NUMERIC "1"
-- Retrieval info: PRIVATE: wsFull NUMERIC "1"
-- Retrieval info: PRIVATE: wsUsedW NUMERIC "1"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: ADD_RAM_OUTPUT_REGISTER STRING "OFF"
-- Retrieval info: CONSTANT: ALMOST_EMPTY_VALUE NUMERIC "2"
-- Retrieval info: CONSTANT: ALMOST_FULL_VALUE NUMERIC "509"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: LPM_NUMWORDS NUMERIC "512"
-- Retrieval info: CONSTANT: LPM_SHOWAHEAD STRING "OFF"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "scfifo"
-- Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "8"
-- Retrieval info: CONSTANT: LPM_WIDTHU NUMERIC "9"
-- Retrieval info: CONSTANT: OVERFLOW_CHECKING STRING "ON"
-- Retrieval info: CONSTANT: UNDERFLOW_CHECKING STRING "ON"
-- Retrieval info: CONSTANT: USE_EAB STRING "ON"
-- Retrieval info: USED_PORT: almost_empty 0 0 0 0 OUTPUT NODEFVAL "almost_empty"
-- Retrieval info: USED_PORT: almost_full 0 0 0 0 OUTPUT NODEFVAL "almost_full"
-- Retrieval info: USED_PORT: clock 0 0 0 0 INPUT NODEFVAL "clock"
-- Retrieval info: USED_PORT: data 0 0 8 0 INPUT NODEFVAL "data[7..0]"
-- Retrieval info: USED_PORT: empty 0 0 0 0 OUTPUT NODEFVAL "empty"
-- Retrieval info: USED_PORT: full 0 0 0 0 OUTPUT NODEFVAL "full"
-- Retrieval info: USED_PORT: q 0 0 8 0 OUTPUT NODEFVAL "q[7..0]"
-- Retrieval info: USED_PORT: rdreq 0 0 0 0 INPUT NODEFVAL "rdreq"
-- Retrieval info: USED_PORT: sclr 0 0 0 0 INPUT NODEFVAL "sclr"
-- Retrieval info: USED_PORT: usedw 0 0 9 0 OUTPUT NODEFVAL "usedw[8..0]"
-- Retrieval info: USED_PORT: wrreq 0 0 0 0 INPUT NODEFVAL "wrreq"
-- Retrieval info: CONNECT: @clock 0 0 0 0 clock 0 0 0 0
-- Retrieval info: CONNECT: @data 0 0 8 0 data 0 0 8 0
-- Retrieval info: CONNECT: @rdreq 0 0 0 0 rdreq 0 0 0 0
-- Retrieval info: CONNECT: @sclr 0 0 0 0 sclr 0 0 0 0
-- Retrieval info: CONNECT: @wrreq 0 0 0 0 wrreq 0 0 0 0
-- Retrieval info: CONNECT: almost_empty 0 0 0 0 @almost_empty 0 0 0 0
-- Retrieval info: CONNECT: almost_full 0 0 0 0 @almost_full 0 0 0 0
-- Retrieval info: CONNECT: empty 0 0 0 0 @empty 0 0 0 0
-- Retrieval info: CONNECT: full 0 0 0 0 @full 0 0 0 0
-- Retrieval info: CONNECT: q 0 0 8 0 @q 0 0 8 0
-- Retrieval info: CONNECT: usedw 0 0 9 0 @usedw 0 0 9 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL fifo_v20.vhd TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL fifo_v20.inc FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL fifo_v20.cmp TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL fifo_v20.bsf FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL fifo_v20_inst.vhd FALSE
-- Retrieval info: LIB_FILE: altera_mf

View file

@ -0,0 +1,72 @@
/*
WARNING: Do NOT edit the input and output ports in this file in a text
editor if you plan to continue editing the block that represents it in
the Block Editor! File corruption is VERY likely to occur.
*/
/*
Copyright (C) 2020 Intel Corporation. All rights reserved.
Your use of Intel Corporation's design tools, logic functions
and other software and tools, and any partner logic
functions, and any output files from any of the foregoing
(including device programming or simulation files), and any
associated documentation or information are expressly subject
to the terms and conditions of the Intel Program License
Subscription Agreement, the Intel Quartus Prime License Agreement,
the Intel FPGA IP License Agreement, or other applicable license
agreement, including, without limitation, that your use is for
the sole purpose of programming logic devices manufactured by
Intel and sold by Intel or its authorized distributors. Please
refer to the applicable agreement for further details, at
https://fpgasoftware.intel.com/eula.
*/
(header "symbol" (version "1.2"))
(symbol
(rect 0 0 208 112)
(text "head_datain" (rect 69 0 151 16)(font "Arial" (font_size 10)))
(text "inst" (rect 8 96 25 108)(font "Arial" ))
(port
(pt 0 48)
(input)
(text "datain[7..0]" (rect 0 0 62 14)(font "Arial" (font_size 8)))
(text "datain[7..0]" (rect 4 34 55 47)(font "Arial" (font_size 8)))
(line (pt 0 48)(pt 64 48)(line_width 3))
)
(port
(pt 0 64)
(input)
(text "inclock" (rect 0 0 38 14)(font "Arial" (font_size 8)))
(text "inclock" (rect 4 50 35 63)(font "Arial" (font_size 8)))
(line (pt 0 64)(pt 64 64))
)
(port
(pt 0 80)
(input)
(text "aclr" (rect 0 0 21 14)(font "Arial" (font_size 8)))
(text "aclr" (rect 4 66 20 79)(font "Arial" (font_size 8)))
(line (pt 0 80)(pt 64 80))
)
(port
(pt 208 48)
(output)
(text "dataout_l[7..0]" (rect 0 0 80 14)(font "Arial" (font_size 8)))
(text "dataout_l[7..0]" (rect 137 34 203 47)(font "Arial" (font_size 8)))
(line (pt 208 48)(pt 128 48)(line_width 3))
)
(port
(pt 208 64)
(output)
(text "dataout_h[7..0]" (rect 0 0 84 14)(font "Arial" (font_size 8)))
(text "dataout_h[7..0]" (rect 133 50 203 63)(font "Arial" (font_size 8)))
(line (pt 208 64)(pt 128 64)(line_width 3))
)
(drawing
(line (pt 64 32)(pt 128 32))
(line (pt 128 32)(pt 128 96))
(line (pt 64 96)(pt 128 96))
(line (pt 64 32)(pt 64 96))
(line (pt 0 0)(pt 208 0))
(line (pt 208 0)(pt 208 112))
(line (pt 0 112)(pt 208 112))
(line (pt 0 0)(pt 0 112))
)
)

View file

@ -0,0 +1,26 @@
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
component head_datain
PORT
(
aclr : IN STD_LOGIC ;
datain : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
inclock : IN STD_LOGIC ;
dataout_h : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
dataout_l : OUT STD_LOGIC_VECTOR (7 DOWNTO 0)
);
end component;

View file

@ -0,0 +1,27 @@
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
FUNCTION head_datain
(
aclr,
datain[7..0],
inclock
)
RETURNS (
dataout_h[7..0],
dataout_l[7..0]
);

View file

@ -0,0 +1,12 @@
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE pinplan>
<pinplan intended_family="Cyclone 10 LP" variation_name="head_datain" megafunction_name="ALTDDIO_IN" specifies="all_ports">
<global>
<pin name="aclr" direction="input" scope="external" />
<pin name="datain[7..0]" direction="input" scope="external" />
<pin name="inclock" direction="input" scope="external" source="clock" />
<pin name="dataout_h[7..0]" direction="output" scope="external" />
<pin name="dataout_l[7..0]" direction="output" scope="external" />
</global>
</pinplan>

View file

@ -0,0 +1,9 @@
set_global_assignment -name IP_TOOL_NAME "ALTDDIO_IN"
set_global_assignment -name IP_TOOL_VERSION "20.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "head_datain.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "head_datain.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "head_datain_inst.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "head_datain.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "head_datain.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "head_datain.ppf"]

View file

@ -0,0 +1,113 @@
-- megafunction wizard: %ALTDDIO_IN%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: ALTDDIO_IN
-- ============================================================
-- File Name: head_datain.vhd
-- Megafunction Name(s):
-- ALTDDIO_IN
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 20.1.1 Build 720 11/11/2020 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.altera_mf_components.all;
ENTITY head_datain IS
PORT
(
aclr : IN STD_LOGIC ;
datain : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
inclock : IN STD_LOGIC ;
dataout_h : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
dataout_l : OUT STD_LOGIC_VECTOR (7 DOWNTO 0)
);
END head_datain;
ARCHITECTURE SYN OF head_datain IS
SIGNAL sub_wire0 : STD_LOGIC_VECTOR (7 DOWNTO 0);
SIGNAL sub_wire1 : STD_LOGIC_VECTOR (7 DOWNTO 0);
BEGIN
dataout_h <= sub_wire0(7 DOWNTO 0);
dataout_l <= sub_wire1(7 DOWNTO 0);
ALTDDIO_IN_component : ALTDDIO_IN
GENERIC MAP (
intended_device_family => "Cyclone 10 LP",
invert_input_clocks => "OFF",
lpm_hint => "UNUSED",
lpm_type => "altddio_in",
power_up_high => "OFF",
width => 8
)
PORT MAP (
aclr => aclr,
datain => datain,
inclock => inclock,
dataout_h => sub_wire0,
dataout_l => sub_wire1
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: INVERT_INPUT_CLOCKS STRING "OFF"
-- Retrieval info: CONSTANT: LPM_HINT STRING "UNUSED"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altddio_in"
-- Retrieval info: CONSTANT: POWER_UP_HIGH STRING "OFF"
-- Retrieval info: CONSTANT: WIDTH NUMERIC "8"
-- Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT NODEFVAL "aclr"
-- Retrieval info: CONNECT: @aclr 0 0 0 0 aclr 0 0 0 0
-- Retrieval info: USED_PORT: datain 0 0 8 0 INPUT NODEFVAL "datain[7..0]"
-- Retrieval info: CONNECT: @datain 0 0 8 0 datain 0 0 8 0
-- Retrieval info: USED_PORT: dataout_h 0 0 8 0 OUTPUT NODEFVAL "dataout_h[7..0]"
-- Retrieval info: CONNECT: dataout_h 0 0 8 0 @dataout_h 0 0 8 0
-- Retrieval info: USED_PORT: dataout_l 0 0 8 0 OUTPUT NODEFVAL "dataout_l[7..0]"
-- Retrieval info: CONNECT: dataout_l 0 0 8 0 @dataout_l 0 0 8 0
-- Retrieval info: USED_PORT: inclock 0 0 0 0 INPUT_CLK_EXT NODEFVAL "inclock"
-- Retrieval info: CONNECT: @inclock 0 0 0 0 inclock 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL head_datain.vhd TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL head_datain.qip TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL head_datain.bsf TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL head_datain_inst.vhd TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL head_datain.inc TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL head_datain.cmp TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL head_datain.ppf TRUE FALSE
-- Retrieval info: LIB_FILE: altera_mf

View file

@ -0,0 +1,25 @@
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
component io_buf_i2c
PORT
(
datain : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
oe : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
dataio : INOUT STD_LOGIC_VECTOR (0 DOWNTO 0);
dataout : OUT STD_LOGIC_VECTOR (0 DOWNTO 0)
);
end component;

View file

@ -0,0 +1,5 @@
set_global_assignment -name IP_TOOL_NAME "ALTIOBUF"
set_global_assignment -name IP_TOOL_VERSION "20.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "io_buf_i2c.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "io_buf_i2c.cmp"]

View file

@ -0,0 +1,189 @@
-- megafunction wizard: %ALTIOBUF%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: altiobuf_bidir
-- ============================================================
-- File Name: io_buf_i2c.vhd
-- Megafunction Name(s):
-- altiobuf_bidir
--
-- Simulation Library Files(s):
--
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 20.1.1 Build 720 11/11/2020 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
--altiobuf_bidir CBX_AUTO_BLACKBOX="ALL" DEVICE_FAMILY="Cyclone 10 LP" ENABLE_BUS_HOLD="FALSE" NUMBER_OF_CHANNELS=1 OPEN_DRAIN_OUTPUT="TRUE" USE_DIFFERENTIAL_MODE="FALSE" USE_DYNAMIC_TERMINATION_CONTROL="FALSE" USE_TERMINATION_CONTROL="FALSE" datain dataio dataout oe
--VERSION_BEGIN 20.1 cbx_altiobuf_bidir 2020:11:11:17:06:45:SJ cbx_mgl 2020:11:11:17:08:38:SJ cbx_stratixiii 2020:11:11:17:06:46:SJ cbx_stratixv 2020:11:11:17:06:46:SJ VERSION_END
LIBRARY cyclone10lp;
USE cyclone10lp.all;
--synthesis_resources = cyclone10lp_io_ibuf 1 cyclone10lp_io_obuf 1
LIBRARY ieee;
USE ieee.std_logic_1164.all;
ENTITY io_buf_i2c_iobuf_bidir_hto IS
PORT
(
datain : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
dataio : INOUT STD_LOGIC_VECTOR (0 DOWNTO 0);
dataout : OUT STD_LOGIC_VECTOR (0 DOWNTO 0);
oe : IN STD_LOGIC_VECTOR (0 DOWNTO 0)
);
END io_buf_i2c_iobuf_bidir_hto;
ARCHITECTURE RTL OF io_buf_i2c_iobuf_bidir_hto IS
SIGNAL wire_ibufa_o : STD_LOGIC;
SIGNAL wire_obufa_o : STD_LOGIC;
COMPONENT cyclone10lp_io_ibuf
GENERIC
(
bus_hold : STRING := "false";
differential_mode : STRING := "false";
simulate_z_as : STRING := "Z";
lpm_type : STRING := "cyclone10lp_io_ibuf"
);
PORT
(
i : IN STD_LOGIC := '0';
ibar : IN STD_LOGIC := '0';
o : OUT STD_LOGIC
);
END COMPONENT;
COMPONENT cyclone10lp_io_obuf
GENERIC
(
bus_hold : STRING := "false";
open_drain_output : STRING := "false";
lpm_type : STRING := "cyclone10lp_io_obuf"
);
PORT
(
i : IN STD_LOGIC := '0';
o : OUT STD_LOGIC;
obar : OUT STD_LOGIC;
oe : IN STD_LOGIC := '1';
seriesterminationcontrol : IN STD_LOGIC_VECTOR(15 DOWNTO 0) := (OTHERS => '0')
);
END COMPONENT;
BEGIN
dataio(0) <= wire_obufa_o;
dataout(0) <= wire_ibufa_o;
ibufa : cyclone10lp_io_ibuf
GENERIC MAP (
bus_hold => "false",
differential_mode => "false"
)
PORT MAP (
i => dataio(0),
o => wire_ibufa_o
);
obufa : cyclone10lp_io_obuf
GENERIC MAP (
bus_hold => "false",
open_drain_output => "true"
)
PORT MAP (
i => datain(0),
o => wire_obufa_o,
oe => oe(0)
);
END RTL; --io_buf_i2c_iobuf_bidir_hto
--VALID FILE
LIBRARY ieee;
USE ieee.std_logic_1164.all;
ENTITY io_buf_i2c IS
PORT
(
datain : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
oe : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
dataio : INOUT STD_LOGIC_VECTOR (0 DOWNTO 0);
dataout : OUT STD_LOGIC_VECTOR (0 DOWNTO 0)
);
END io_buf_i2c;
ARCHITECTURE RTL OF io_buf_i2c IS
SIGNAL sub_wire0 : STD_LOGIC_VECTOR (0 DOWNTO 0);
COMPONENT io_buf_i2c_iobuf_bidir_hto
PORT (
datain : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
oe : IN STD_LOGIC_VECTOR (0 DOWNTO 0);
dataout : OUT STD_LOGIC_VECTOR (0 DOWNTO 0);
dataio : INOUT STD_LOGIC_VECTOR (0 DOWNTO 0)
);
END COMPONENT;
BEGIN
dataout <= sub_wire0(0 DOWNTO 0);
io_buf_i2c_iobuf_bidir_hto_component : io_buf_i2c_iobuf_bidir_hto
PORT MAP (
datain => datain,
oe => oe,
dataout => sub_wire0,
dataio => dataio
);
END RTL;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: enable_bus_hold STRING "FALSE"
-- Retrieval info: CONSTANT: number_of_channels NUMERIC "1"
-- Retrieval info: CONSTANT: open_drain_output STRING "TRUE"
-- Retrieval info: CONSTANT: use_differential_mode STRING "FALSE"
-- Retrieval info: CONSTANT: use_dynamic_termination_control STRING "FALSE"
-- Retrieval info: CONSTANT: use_termination_control STRING "FALSE"
-- Retrieval info: USED_PORT: datain 0 0 1 0 INPUT NODEFVAL "datain[0..0]"
-- Retrieval info: USED_PORT: dataio 0 0 1 0 BIDIR NODEFVAL "dataio[0..0]"
-- Retrieval info: USED_PORT: dataout 0 0 1 0 OUTPUT NODEFVAL "dataout[0..0]"
-- Retrieval info: USED_PORT: oe 0 0 1 0 INPUT NODEFVAL "oe[0..0]"
-- Retrieval info: CONNECT: @datain 0 0 1 0 datain 0 0 1 0
-- Retrieval info: CONNECT: @oe 0 0 1 0 oe 0 0 1 0
-- Retrieval info: CONNECT: dataio 0 0 1 0 @dataio 0 0 1 0
-- Retrieval info: CONNECT: dataout 0 0 1 0 @dataout 0 0 1 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL io_buf_i2c.vhd TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL io_buf_i2c.inc FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL io_buf_i2c.cmp TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL io_buf_i2c.bsf FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL io_buf_i2c_inst.vhd FALSE

View file

@ -0,0 +1,32 @@
<?xml version="1.0" encoding="US-ASCII" standalone="yes"?>
<cof>
<eprom_name>MT25QU128</eprom_name>
<flash_loader_device>10CL010Y</flash_loader_device>
<output_filename>output_files/pei_sg1024_new.jic</output_filename>
<n_pages>1</n_pages>
<width>1</width>
<mode>7</mode>
<sof_data>
<user_name>Page_0</user_name>
<page_flags>1</page_flags>
<bit0>
<sof_filename>D:/git/hmb-fd-sg1024/firmware/pei_fpga_top/build/output_files/pei_fpga_top.sof</sof_filename>
</bit0>
</sof_data>
<version>10</version>
<create_cvp_file>0</create_cvp_file>
<create_hps_iocsr>0</create_hps_iocsr>
<auto_create_rpd>0</auto_create_rpd>
<rpd_little_endian>1</rpd_little_endian>
<options>
<map_file>1</map_file>
</options>
<advanced_options>
<ignore_epcs_id_check>1</ignore_epcs_id_check>
<ignore_condone_check>2</ignore_condone_check>
<plc_adjustment>0</plc_adjustment>
<post_chain_bitstream_pad_bytes>-1</post_chain_bitstream_pad_bytes>
<post_device_bitstream_pad_bytes>-1</post_device_bitstream_pad_bytes>
<bitslice_pre_padding>1</bitslice_pre_padding>
</advanced_options>
</cof>

View file

@ -0,0 +1,5 @@
set_global_assignment -name IP_TOOL_NAME "FIFO"
set_global_assignment -name IP_TOOL_VERSION "19.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "pei_din_fifo.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pei_din_fifo.cmp"]

View file

@ -0,0 +1,194 @@
-- megafunction wizard: %FIFO%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: dcfifo
-- ============================================================
-- File Name: pei_din_fifo.vhd
-- Megafunction Name(s):
-- dcfifo
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 19.1.0 Build 670 09/22/2019 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2019 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.all;
ENTITY pei_din_fifo IS
PORT
(
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
rdclk : IN STD_LOGIC ;
rdreq : IN STD_LOGIC ;
wrclk : IN STD_LOGIC ;
wrreq : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
rdempty : OUT STD_LOGIC ;
wrfull : OUT STD_LOGIC
);
END pei_din_fifo;
ARCHITECTURE SYN OF pei_din_fifo IS
SIGNAL sub_wire0 : STD_LOGIC_VECTOR (7 DOWNTO 0);
SIGNAL sub_wire1 : STD_LOGIC ;
SIGNAL sub_wire2 : STD_LOGIC ;
COMPONENT dcfifo
GENERIC (
intended_device_family : STRING;
lpm_numwords : NATURAL;
lpm_showahead : STRING;
lpm_type : STRING;
lpm_width : NATURAL;
lpm_widthu : NATURAL;
overflow_checking : STRING;
rdsync_delaypipe : NATURAL;
underflow_checking : STRING;
use_eab : STRING;
wrsync_delaypipe : NATURAL
);
PORT (
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
rdclk : IN STD_LOGIC ;
rdreq : IN STD_LOGIC ;
wrclk : IN STD_LOGIC ;
wrreq : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
rdempty : OUT STD_LOGIC ;
wrfull : OUT STD_LOGIC
);
END COMPONENT;
BEGIN
q <= sub_wire0(7 DOWNTO 0);
rdempty <= sub_wire1;
wrfull <= sub_wire2;
dcfifo_component : dcfifo
GENERIC MAP (
intended_device_family => "Cyclone 10 LP",
lpm_numwords => 256,
lpm_showahead => "ON",
lpm_type => "dcfifo",
lpm_width => 8,
lpm_widthu => 8,
overflow_checking => "ON",
rdsync_delaypipe => 4,
underflow_checking => "ON",
use_eab => "ON",
wrsync_delaypipe => 4
)
PORT MAP (
data => data,
rdclk => rdclk,
rdreq => rdreq,
wrclk => wrclk,
wrreq => wrreq,
q => sub_wire0,
rdempty => sub_wire1,
wrfull => sub_wire2
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: AlmostEmpty NUMERIC "0"
-- Retrieval info: PRIVATE: AlmostEmptyThr NUMERIC "-1"
-- Retrieval info: PRIVATE: AlmostFull NUMERIC "0"
-- Retrieval info: PRIVATE: AlmostFullThr NUMERIC "-1"
-- Retrieval info: PRIVATE: CLOCKS_ARE_SYNCHRONIZED NUMERIC "0"
-- Retrieval info: PRIVATE: Clock NUMERIC "4"
-- Retrieval info: PRIVATE: Depth NUMERIC "256"
-- Retrieval info: PRIVATE: Empty NUMERIC "1"
-- Retrieval info: PRIVATE: Full NUMERIC "1"
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: PRIVATE: LE_BasedFIFO NUMERIC "0"
-- Retrieval info: PRIVATE: LegacyRREQ NUMERIC "0"
-- Retrieval info: PRIVATE: MAX_DEPTH_BY_9 NUMERIC "0"
-- Retrieval info: PRIVATE: OVERFLOW_CHECKING NUMERIC "0"
-- Retrieval info: PRIVATE: Optimize NUMERIC "0"
-- Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0"
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
-- Retrieval info: PRIVATE: UNDERFLOW_CHECKING NUMERIC "0"
-- Retrieval info: PRIVATE: UsedW NUMERIC "1"
-- Retrieval info: PRIVATE: Width NUMERIC "8"
-- Retrieval info: PRIVATE: dc_aclr NUMERIC "0"
-- Retrieval info: PRIVATE: diff_widths NUMERIC "0"
-- Retrieval info: PRIVATE: msb_usedw NUMERIC "0"
-- Retrieval info: PRIVATE: output_width NUMERIC "8"
-- Retrieval info: PRIVATE: rsEmpty NUMERIC "1"
-- Retrieval info: PRIVATE: rsFull NUMERIC "0"
-- Retrieval info: PRIVATE: rsUsedW NUMERIC "0"
-- Retrieval info: PRIVATE: sc_aclr NUMERIC "0"
-- Retrieval info: PRIVATE: sc_sclr NUMERIC "0"
-- Retrieval info: PRIVATE: wsEmpty NUMERIC "0"
-- Retrieval info: PRIVATE: wsFull NUMERIC "1"
-- Retrieval info: PRIVATE: wsUsedW NUMERIC "0"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: LPM_NUMWORDS NUMERIC "256"
-- Retrieval info: CONSTANT: LPM_SHOWAHEAD STRING "ON"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "dcfifo"
-- Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "8"
-- Retrieval info: CONSTANT: LPM_WIDTHU NUMERIC "8"
-- Retrieval info: CONSTANT: OVERFLOW_CHECKING STRING "ON"
-- Retrieval info: CONSTANT: RDSYNC_DELAYPIPE NUMERIC "4"
-- Retrieval info: CONSTANT: UNDERFLOW_CHECKING STRING "ON"
-- Retrieval info: CONSTANT: USE_EAB STRING "ON"
-- Retrieval info: CONSTANT: WRSYNC_DELAYPIPE NUMERIC "4"
-- Retrieval info: USED_PORT: data 0 0 8 0 INPUT NODEFVAL "data[7..0]"
-- Retrieval info: USED_PORT: q 0 0 8 0 OUTPUT NODEFVAL "q[7..0]"
-- Retrieval info: USED_PORT: rdclk 0 0 0 0 INPUT NODEFVAL "rdclk"
-- Retrieval info: USED_PORT: rdempty 0 0 0 0 OUTPUT NODEFVAL "rdempty"
-- Retrieval info: USED_PORT: rdreq 0 0 0 0 INPUT NODEFVAL "rdreq"
-- Retrieval info: USED_PORT: wrclk 0 0 0 0 INPUT NODEFVAL "wrclk"
-- Retrieval info: USED_PORT: wrfull 0 0 0 0 OUTPUT NODEFVAL "wrfull"
-- Retrieval info: USED_PORT: wrreq 0 0 0 0 INPUT NODEFVAL "wrreq"
-- Retrieval info: CONNECT: @data 0 0 8 0 data 0 0 8 0
-- Retrieval info: CONNECT: @rdclk 0 0 0 0 rdclk 0 0 0 0
-- Retrieval info: CONNECT: @rdreq 0 0 0 0 rdreq 0 0 0 0
-- Retrieval info: CONNECT: @wrclk 0 0 0 0 wrclk 0 0 0 0
-- Retrieval info: CONNECT: @wrreq 0 0 0 0 wrreq 0 0 0 0
-- Retrieval info: CONNECT: q 0 0 8 0 @q 0 0 8 0
-- Retrieval info: CONNECT: rdempty 0 0 0 0 @rdempty 0 0 0 0
-- Retrieval info: CONNECT: wrfull 0 0 0 0 @wrfull 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_din_fifo.vhd TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_din_fifo.inc FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_din_fifo.cmp TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_din_fifo.bsf FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_din_fifo_inst.vhd FALSE
-- Retrieval info: LIB_FILE: altera_mf

View file

@ -0,0 +1,56 @@
IP Upgrade report for pei_fpga_top
Thu Apr 27 16:15:54 2023
Quartus Prime Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition
---------------------
; Table of Contents ;
---------------------
1. Legal Notice
2. IP Upgrade Summary
3. IP Upgrade Messages
----------------
; Legal Notice ;
----------------
Copyright (C) 2020 Intel Corporation. All rights reserved.
Your use of Intel Corporation's design tools, logic functions
and other software and tools, and any partner logic
functions, and any output files from any of the foregoing
(including device programming or simulation files), and any
associated documentation or information are expressly subject
to the terms and conditions of the Intel Program License
Subscription Agreement, the Intel Quartus Prime License Agreement,
the Intel FPGA IP License Agreement, or other applicable license
agreement, including, without limitation, that your use is for
the sole purpose of programming logic devices manufactured by
Intel and sold by Intel or its authorized distributors. Please
refer to the applicable agreement for further details, at
https://fpgasoftware.intel.com/eula.
+----------------------------------------------------------------------------+
; IP Upgrade Summary ;
+------------------------------+---------------------------------------------+
; IP Components Upgrade Status ; Failed - Thu Apr 27 16:15:54 2023 ;
; Quartus Prime Version ; 20.1.1 Build 720 11/11/2020 SJ Lite Edition ;
; Revision Name ; pei_fpga_top ;
; Top-level Entity Name ; pei_fpga_top ;
; Family ; Cyclone 10 LP ;
+------------------------------+---------------------------------------------+
+---------------------+
; IP Upgrade Messages ;
+---------------------+
Info (23030): Evaluation of Tcl script c:/intelfpga_lite/20.1/quartus/common/tcl/internal/ip_regen/ip_regen.tcl was successful
Info: Quartus Prime Shell was successful. 0 errors, 0 warnings
Info: Peak virtual memory: 4886 megabytes
Info: Processing ended: Thu Apr 27 16:15:54 2023
Info: Elapsed time: 00:00:10
Info: Total CPU time (on all processors): 00:00:20

View file

@ -0,0 +1,134 @@
## Generated SDC file "pei_fpga_top.out.sdc"
## Copyright (C) 2020 Intel Corporation. All rights reserved.
## Your use of Intel Corporation's design tools, logic functions
## and other software and tools, and any partner logic
## functions, and any output files from any of the foregoing
## (including device programming or simulation files), and any
## associated documentation or information are expressly subject
## to the terms and conditions of the Intel Program License
## Subscription Agreement, the Intel Quartus Prime License Agreement,
## the Intel FPGA IP License Agreement, or other applicable license
## agreement, including, without limitation, that your use is for
## the sole purpose of programming logic devices manufactured by
## Intel and sold by Intel or its authorized distributors. Please
## refer to the applicable agreement for further details, at
## https://fpgasoftware.intel.com/eula.
## VENDOR "Altera"
## PROGRAM "Quartus Prime"
## VERSION "Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition"
## DATE "Tue Sep 10 16:20:15 2024"
##
## DEVICE "10CL010YU256C8G"
##
#**************************************************************
# Time Information
#**************************************************************
set_time_format -unit ns -decimal_places 3
#**************************************************************
# Create Clock
#**************************************************************
create_clock -name {clk25_in} -period 40.000 -waveform { 0.000 20.000 } [get_ports {clk25_in}]
create_clock -name {c_clk[0]} -period 62.500 -waveform { 0.000 31.250 } [get_ports { c_clk[0] }]
#**************************************************************
# Create Generated Clock
#**************************************************************
create_generated_clock -name {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]} -source [get_pins {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|inclk[0]}] -duty_cycle 50/1 -multiply_by 4 -master_clock {clk25_in} [get_pins {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}]
#**************************************************************
# Set Clock Latency
#**************************************************************
#**************************************************************
# Set Clock Uncertainty
#**************************************************************
set_clock_uncertainty -rise_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -rise_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] 0.020
set_clock_uncertainty -rise_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -fall_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] 0.020
set_clock_uncertainty -rise_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -rise_to [get_clocks {c_clk[0]}] -setup 0.110
set_clock_uncertainty -rise_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -rise_to [get_clocks {c_clk[0]}] -hold 0.080
set_clock_uncertainty -rise_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -fall_to [get_clocks {c_clk[0]}] -setup 0.110
set_clock_uncertainty -rise_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -fall_to [get_clocks {c_clk[0]}] -hold 0.080
set_clock_uncertainty -fall_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -rise_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] 0.020
set_clock_uncertainty -fall_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -fall_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] 0.020
set_clock_uncertainty -fall_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -rise_to [get_clocks {c_clk[0]}] -setup 0.110
set_clock_uncertainty -fall_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -rise_to [get_clocks {c_clk[0]}] -hold 0.080
set_clock_uncertainty -fall_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -fall_to [get_clocks {c_clk[0]}] -setup 0.110
set_clock_uncertainty -fall_from [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -fall_to [get_clocks {c_clk[0]}] -hold 0.080
set_clock_uncertainty -rise_from [get_clocks {c_clk[0]}] -rise_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -setup 0.080
set_clock_uncertainty -rise_from [get_clocks {c_clk[0]}] -rise_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -hold 0.110
set_clock_uncertainty -rise_from [get_clocks {c_clk[0]}] -fall_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -setup 0.080
set_clock_uncertainty -rise_from [get_clocks {c_clk[0]}] -fall_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -hold 0.110
set_clock_uncertainty -rise_from [get_clocks {c_clk[0]}] -rise_to [get_clocks {c_clk[0]}] 0.020
set_clock_uncertainty -rise_from [get_clocks {c_clk[0]}] -fall_to [get_clocks {c_clk[0]}] 0.020
set_clock_uncertainty -fall_from [get_clocks {c_clk[0]}] -rise_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -setup 0.080
set_clock_uncertainty -fall_from [get_clocks {c_clk[0]}] -rise_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -hold 0.110
set_clock_uncertainty -fall_from [get_clocks {c_clk[0]}] -fall_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -setup 0.080
set_clock_uncertainty -fall_from [get_clocks {c_clk[0]}] -fall_to [get_clocks {\GEN_PLL:pll_25in_100out_inst|altpll_component|auto_generated|pll1|clk[0]}] -hold 0.110
set_clock_uncertainty -fall_from [get_clocks {c_clk[0]}] -rise_to [get_clocks {c_clk[0]}] 0.020
set_clock_uncertainty -fall_from [get_clocks {c_clk[0]}] -fall_to [get_clocks {c_clk[0]}] 0.020
#**************************************************************
# Set Input Delay
#**************************************************************
#**************************************************************
# Set Output Delay
#**************************************************************
#**************************************************************
# Set Clock Groups
#**************************************************************
#**************************************************************
# Set False Path
#**************************************************************
#**************************************************************
# Set Multicycle Path
#**************************************************************
#**************************************************************
# Set Maximum Delay
#**************************************************************
#**************************************************************
# Set Minimum Delay
#**************************************************************
#**************************************************************
# Set Input Transition
#**************************************************************

View file

@ -0,0 +1,31 @@
# -------------------------------------------------------------------------- #
#
# Copyright (C) 2019 Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions
# and other software and tools, and any partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Intel Program License
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors. Please
# refer to the applicable agreement for further details, at
# https://fpgasoftware.intel.com/eula.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
# Date created = 16:16:35 April 19, 2022
#
# -------------------------------------------------------------------------- #
QUARTUS_VERSION = "19.1"
DATE = "16:16:35 April 19, 2022"
# Revisions
PROJECT_REVISION = "pei_fpga_top"

View file

@ -0,0 +1,177 @@
# -------------------------------------------------------------------------- #
#
# Copyright (C) 2019 Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions
# and other software and tools, and any partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Intel Program License
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors. Please
# refer to the applicable agreement for further details, at
# https://fpgasoftware.intel.com/eula.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
# Date created = 16:16:35 April 19, 2022
#
# -------------------------------------------------------------------------- #
#
# Notes:
#
# 1) The default values for assignments are stored in the file:
# pei_fpga_top_assignment_defaults.qdf
# If this file doesn't exist, see file:
# assignment_defaults.qdf
#
# 2) Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus Prime software
# and any changes you make may be lost or overwritten.
#
# -------------------------------------------------------------------------- #
set_global_assignment -name FAMILY "Cyclone 10 LP"
set_global_assignment -name DEVICE 10CL010YU256C8G
set_global_assignment -name TOP_LEVEL_ENTITY pei_fpga_top
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 19.1.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "16:16:35 APRIL 19, 2022"
set_global_assignment -name LAST_QUARTUS_VERSION "20.1.1 Lite Edition"
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
set_global_assignment -name DEVICE_FILTER_PACKAGE UFBGA
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 256
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
set_global_assignment -name NOMINAL_CORE_SUPPLY_VOLTAGE 1.2V
set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (VHDL)"
set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation
set_global_assignment -name EDA_OUTPUT_DATA_FORMAT VHDL -section_id eda_simulation
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_timing
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_symbol
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_signal_integrity
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_boundary_scan
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW"
set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)"
set_instance_assignment -name IO_STANDARD LVDS -to lvds_clk_in
set_location_assignment PIN_M2 -to lvds_clk_in
set_location_assignment PIN_M1 -to "lvds_clk_in(n)"
set_instance_assignment -name IO_STANDARD LVDS -to lvds_d_in[0]
set_location_assignment PIN_J2 -to lvds_d_in[0]
set_location_assignment PIN_J1 -to "lvds_d_in[0](n)"
set_instance_assignment -name IO_STANDARD LVDS -to lvds_d_in[1]
set_location_assignment PIN_L2 -to lvds_d_in[1]
set_location_assignment PIN_L1 -to "lvds_d_in[1](n)"
set_instance_assignment -name IO_STANDARD LVDS -to lvds_d_in[2]
set_location_assignment PIN_K6 -to lvds_d_in[2]
set_location_assignment PIN_L6 -to "lvds_d_in[2](n)"
set_instance_assignment -name IO_STANDARD LVDS -to lvds_d_in[3]
set_location_assignment PIN_P2 -to lvds_d_in[3]
set_location_assignment PIN_P1 -to "lvds_d_in[3](n)"
set_location_assignment PIN_M15 -to c_clk[0]
set_location_assignment PIN_M6 -to c_clk[1]
set_location_assignment PIN_E15 -to clk25_in
set_location_assignment PIN_N2 -to alert_out -disable
set_location_assignment PIN_C1 -to cfg_wdata
set_location_assignment PIN_D2 -to cfg_ncs
set_location_assignment PIN_N9 -to two_col
set_location_assignment PIN_L15 -to head_lat[0]
set_location_assignment PIN_R4 -to head_lat[1]
set_location_assignment PIN_P8 -to head_data[0]
set_location_assignment PIN_R5 -to head_data[6]
set_location_assignment PIN_R6 -to head_data[3]
set_location_assignment PIN_R7 -to head_data[1]
set_location_assignment PIN_T4 -to head_data[7]
set_location_assignment PIN_T5 -to head_data[5]
set_location_assignment PIN_T6 -to head_data[4]
set_location_assignment PIN_T7 -to head_data[2]
set_location_assignment PIN_G15 -to v_en[1]
set_location_assignment PIN_G16 -to v_en[2]
set_location_assignment PIN_E6 -to v_en[0]
set_location_assignment PIN_F8 -to v_en[3]
set_location_assignment PIN_K5 -to stm8_alert_in[0]
set_location_assignment PIN_P16 -to sda_fpga
set_location_assignment PIN_B16 -to scl_fpga
set_location_assignment PIN_C3 -to shutdn
set_location_assignment PIN_K10 -to wf_sel[0]
set_location_assignment PIN_R10 -to wf_sel[1]
set_location_assignment PIN_T12 -to wf_sel[2]
set_location_assignment PIN_A9 -to temp_alert_in
set_location_assignment PIN_E2 -to stm8_alert_in[1]
set_location_assignment PIN_E8 -to dbg_ser_out
set_location_assignment PIN_E7 -to dbg_ser_in
set_location_assignment PIN_A10 -to nled_g
set_location_assignment PIN_D11 -to nled_r
set_location_assignment PIN_B10 -to nled_y
set_location_assignment PIN_B8 -to pei_clkin
set_location_assignment PIN_A8 -to pei_clkout
set_location_assignment PIN_P3 -to hd_scl_fpga
set_location_assignment PIN_N6 -to hd_sda_fpga
set_global_assignment -name ENABLE_OCT_DONE OFF
set_global_assignment -name ENABLE_CONFIGURATION_PINS OFF
set_global_assignment -name ENABLE_BOOT_SEL_PIN OFF
set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF
set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall
set_global_assignment -name VHDL_INPUT_VERSION VHDL_2008
set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
set_global_assignment -name ENABLE_SIGNALTAP ON
set_global_assignment -name USE_SIGNALTAP_FILE output_files/stpI2C.stp
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
set_global_assignment -name VERILOG_FILE ../src/simple_i2c_masterPEI.v
set_global_assignment -name VHDL_FILE ../src/mcp4631.vhd
set_global_assignment -name VHDL_FILE ../src/ring_buffer.vhd
set_global_assignment -name VERILOG_FILE ../src/simple_i2c_slave_eprom.v
set_global_assignment -name VHDL_FILE ../src/pkg_functions_pei.vhd
set_global_assignment -name VHDL_FILE ../src/pei_register_pkg.vhd
set_global_assignment -name VERILOG_FILE ../src/simple_i2c_slave_tmp275.v
set_global_assignment -name VHDL_FILE ../../el_generic_ip/generic_ip/common/0/src/sync_pulse.vhd
set_global_assignment -name VERILOG_FILE ../../el_generic_ip/generic_ip/pei_shared/1/src/pei_decoder_uart_1.v
set_global_assignment -name VERILOG_FILE ../../generic_ip/pei_shared/1/src/pei_unbuffered_uart_1.v
set_global_assignment -name VERILOG_FILE ../../generic_ip/pei_shared/1/src/pei_debug_serial_port_1.v
set_global_assignment -name VHDL_FILE ../../generic_ip/pei_shared/1/src/pei_debug_uart_1.vhd
set_global_assignment -name VHDL_FILE ../src/head_data_proc.vhd
set_global_assignment -name VHDL_FILE ../src/TMP275.vhd
set_global_assignment -name SDC_FILE pei_fpga_top.out.sdc
set_global_assignment -name VERILOG_FILE ../src/simple_i2c_slave.v
set_global_assignment -name VHDL_FILE ../src/pei_fpga_top.vhd
set_global_assignment -name QIP_FILE io_buf_i2c.qip
set_global_assignment -name QIP_FILE pll_25in_100out_pei.qip
set_global_assignment -name SOURCE_FILE db/pei_fpga_top.cmp.rdb
set_global_assignment -name SIGNALTAP_FILE stp1.stp
set_global_assignment -name SIGNALTAP_FILE output_files/stpI2C.stp
set_global_assignment -name CDF_FILE output_files/pei_fpga_top_cdf.cdf
set_global_assignment -name QIP_FILE head_data.qip
set_global_assignment -name QIP_FILE head_datain.qip

View file

@ -0,0 +1,808 @@
# -------------------------------------------------------------------------- #
#
# Copyright (C) 2020 Intel Corporation. All rights reserved.
# Your use of Intel Corporation's design tools, logic functions
# and other software and tools, and any partner logic
# functions, and any output files from any of the foregoing
# (including device programming or simulation files), and any
# associated documentation or information are expressly subject
# to the terms and conditions of the Intel Program License
# Subscription Agreement, the Intel Quartus Prime License Agreement,
# the Intel FPGA IP License Agreement, or other applicable license
# agreement, including, without limitation, that your use is for
# the sole purpose of programming logic devices manufactured by
# Intel and sold by Intel or its authorized distributors. Please
# refer to the applicable agreement for further details, at
# https://fpgasoftware.intel.com/eula.
#
# -------------------------------------------------------------------------- #
#
# Quartus Prime
# Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition
# Date created = 10:31:25 May 25, 2022
#
# -------------------------------------------------------------------------- #
#
# Note:
#
# 1) Do not modify this file. This file was generated
# automatically by the Quartus Prime software and is used
# to preserve global assignments across Quartus Prime versions.
#
# -------------------------------------------------------------------------- #
set_global_assignment -name IP_COMPONENT_REPORT_HIERARCHY Off
set_global_assignment -name IP_COMPONENT_INTERNAL Off
set_global_assignment -name PROJECT_SHOW_ENTITY_NAME On
set_global_assignment -name PROJECT_USE_SIMPLIFIED_NAMES Off
set_global_assignment -name ENABLE_REDUCED_MEMORY_MODE Off
set_global_assignment -name VER_COMPATIBLE_DB_DIR export_db
set_global_assignment -name AUTO_EXPORT_VER_COMPATIBLE_DB Off
set_global_assignment -name FLOW_DISABLE_ASSEMBLER Off
set_global_assignment -name FLOW_ENABLE_POWER_ANALYZER Off
set_global_assignment -name FLOW_ENABLE_HC_COMPARE Off
set_global_assignment -name HC_OUTPUT_DIR hc_output
set_global_assignment -name SAVE_MIGRATION_INFO_DURING_COMPILATION Off
set_global_assignment -name FLOW_ENABLE_IO_ASSIGNMENT_ANALYSIS Off
set_global_assignment -name RUN_FULL_COMPILE_ON_DEVICE_CHANGE On
set_global_assignment -name FLOW_ENABLE_RTL_VIEWER Off
set_global_assignment -name READ_OR_WRITE_IN_BYTE_ADDRESS "Use global settings"
set_global_assignment -name FLOW_HARDCOPY_DESIGN_READINESS_CHECK On
set_global_assignment -name FLOW_ENABLE_PARALLEL_MODULES On
set_global_assignment -name ENABLE_COMPACT_REPORT_TABLE Off
set_global_assignment -name REVISION_TYPE Base -family "Arria V"
set_global_assignment -name REVISION_TYPE Base -family "Stratix V"
set_global_assignment -name REVISION_TYPE Base -family "Arria V GZ"
set_global_assignment -name REVISION_TYPE Base -family "Cyclone V"
set_global_assignment -name DEFAULT_HOLD_MULTICYCLE "Same as Multicycle"
set_global_assignment -name CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS On
set_global_assignment -name CUT_OFF_READ_DURING_WRITE_PATHS On
set_global_assignment -name CUT_OFF_IO_PIN_FEEDBACK On
set_global_assignment -name DO_COMBINED_ANALYSIS Off
set_global_assignment -name TDC_AGGRESSIVE_HOLD_CLOSURE_EFFORT Off
set_global_assignment -name ENABLE_HPS_INTERNAL_TIMING Off
set_global_assignment -name EMIF_SOC_PHYCLK_ADVANCE_MODELING Off
set_global_assignment -name USE_DLL_FREQUENCY_FOR_DQS_DELAY_CHAIN Off
set_global_assignment -name ANALYZE_LATCHES_AS_SYNCHRONOUS_ELEMENTS On
set_global_assignment -name TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS On
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Arria V"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Cyclone 10 LP"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "MAX 10"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Stratix IV"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Cyclone IV E"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Arria 10"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS Off -family "MAX V"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Stratix V"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Arria V GZ"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS Off -family "MAX II"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Arria II GX"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Arria II GZ"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Cyclone IV GX"
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS On -family "Cyclone V"
set_global_assignment -name TIMING_ANALYZER_DO_REPORT_TIMING Off
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Arria V"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS On -family "Cyclone 10 LP"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "MAX 10"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Stratix IV"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS On -family "Cyclone IV E"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Arria 10"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS On -family "MAX V"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Stratix V"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Arria V GZ"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS On -family "MAX II"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Arria II GX"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Arria II GZ"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS On -family "Cyclone IV GX"
set_global_assignment -name TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS Off -family "Cyclone V"
set_global_assignment -name TIMING_ANALYZER_REPORT_NUM_WORST_CASE_TIMING_PATHS 100
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Arria V"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Cyclone 10 LP"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "MAX 10"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Cyclone IV E"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Stratix IV"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Arria 10"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL Off -family "MAX V"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Stratix V"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Arria V GZ"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL Off -family "MAX II"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Arria II GX"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Arria II GZ"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Cyclone IV GX"
set_global_assignment -name TIMING_ANALYZER_DO_CCPP_REMOVAL On -family "Cyclone V"
set_global_assignment -name OPTIMIZATION_MODE Balanced
set_global_assignment -name ALLOW_REGISTER_MERGING On
set_global_assignment -name ALLOW_REGISTER_DUPLICATION On
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Arria V"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER ON -family "Cyclone 10 LP"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "MAX 10"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Stratix IV"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Cyclone IV E"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER ON -family "Arria 10"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "MAX V"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Stratix V"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Arria V GZ"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "MAX II"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Arria II GX"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Arria II GZ"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Cyclone IV GX"
set_global_assignment -name DISABLE_LEGACY_TIMING_ANALYZER OFF -family "Cyclone V"
set_global_assignment -name MUX_RESTRUCTURE Auto
set_global_assignment -name MLAB_ADD_TIMING_CONSTRAINTS_FOR_MIXED_PORT_FEED_THROUGH_MODE_SETTING_DONT_CARE Off
set_global_assignment -name ENABLE_IP_DEBUG Off
set_global_assignment -name SAVE_DISK_SPACE On
set_global_assignment -name OCP_HW_EVAL Enable
set_global_assignment -name DEVICE_FILTER_PACKAGE Any
set_global_assignment -name DEVICE_FILTER_PIN_COUNT Any
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE Any
set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
set_global_assignment -name VERILOG_INPUT_VERSION Verilog_2001
set_global_assignment -name VHDL_INPUT_VERSION VHDL_1993
set_global_assignment -name FAMILY "Cyclone V"
set_global_assignment -name TRUE_WYSIWYG_FLOW Off
set_global_assignment -name SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES Off
set_global_assignment -name STATE_MACHINE_PROCESSING Auto
set_global_assignment -name SAFE_STATE_MACHINE Off
set_global_assignment -name EXTRACT_VERILOG_STATE_MACHINES On
set_global_assignment -name EXTRACT_VHDL_STATE_MACHINES On
set_global_assignment -name IGNORE_VERILOG_INITIAL_CONSTRUCTS Off
set_global_assignment -name VERILOG_CONSTANT_LOOP_LIMIT 5000
set_global_assignment -name VERILOG_NON_CONSTANT_LOOP_LIMIT 250
set_global_assignment -name INFER_RAMS_FROM_RAW_LOGIC On
set_global_assignment -name PARALLEL_SYNTHESIS On
set_global_assignment -name DSP_BLOCK_BALANCING Auto
set_global_assignment -name MAX_BALANCING_DSP_BLOCKS "-1 (Unlimited)"
set_global_assignment -name NOT_GATE_PUSH_BACK On
set_global_assignment -name ALLOW_POWER_UP_DONT_CARE On
set_global_assignment -name REMOVE_REDUNDANT_LOGIC_CELLS Off
set_global_assignment -name REMOVE_DUPLICATE_REGISTERS On
set_global_assignment -name IGNORE_CARRY_BUFFERS Off
set_global_assignment -name IGNORE_CASCADE_BUFFERS Off
set_global_assignment -name IGNORE_GLOBAL_BUFFERS Off
set_global_assignment -name IGNORE_ROW_GLOBAL_BUFFERS Off
set_global_assignment -name IGNORE_LCELL_BUFFERS Off
set_global_assignment -name MAX7000_IGNORE_LCELL_BUFFERS AUTO
set_global_assignment -name IGNORE_SOFT_BUFFERS On
set_global_assignment -name MAX7000_IGNORE_SOFT_BUFFERS Off
set_global_assignment -name LIMIT_AHDL_INTEGERS_TO_32_BITS Off
set_global_assignment -name AUTO_GLOBAL_CLOCK_MAX On
set_global_assignment -name AUTO_GLOBAL_OE_MAX On
set_global_assignment -name MAX_AUTO_GLOBAL_REGISTER_CONTROLS On
set_global_assignment -name AUTO_IMPLEMENT_IN_ROM Off
set_global_assignment -name APEX20K_TECHNOLOGY_MAPPER Lut
set_global_assignment -name OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name STRATIXII_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name CYCLONEII_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name MAXII_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name MAX7000_OPTIMIZATION_TECHNIQUE Speed
set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE Balanced
set_global_assignment -name MERCURY_OPTIMIZATION_TECHNIQUE Area
set_global_assignment -name FLEX6K_OPTIMIZATION_TECHNIQUE Area
set_global_assignment -name FLEX10K_OPTIMIZATION_TECHNIQUE Area
set_global_assignment -name ALLOW_XOR_GATE_USAGE On
set_global_assignment -name AUTO_LCELL_INSERTION On
set_global_assignment -name CARRY_CHAIN_LENGTH 48
set_global_assignment -name FLEX6K_CARRY_CHAIN_LENGTH 32
set_global_assignment -name FLEX10K_CARRY_CHAIN_LENGTH 32
set_global_assignment -name MERCURY_CARRY_CHAIN_LENGTH 48
set_global_assignment -name STRATIX_CARRY_CHAIN_LENGTH 70
set_global_assignment -name STRATIXII_CARRY_CHAIN_LENGTH 70
set_global_assignment -name CASCADE_CHAIN_LENGTH 2
set_global_assignment -name PARALLEL_EXPANDER_CHAIN_LENGTH 16
set_global_assignment -name MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH 4
set_global_assignment -name AUTO_CARRY_CHAINS On
set_global_assignment -name AUTO_CASCADE_CHAINS On
set_global_assignment -name AUTO_PARALLEL_EXPANDERS On
set_global_assignment -name AUTO_OPEN_DRAIN_PINS On
set_global_assignment -name ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP Off
set_global_assignment -name AUTO_ROM_RECOGNITION On
set_global_assignment -name AUTO_RAM_RECOGNITION On
set_global_assignment -name AUTO_DSP_RECOGNITION On
set_global_assignment -name AUTO_SHIFT_REGISTER_RECOGNITION Auto
set_global_assignment -name ALLOW_SHIFT_REGISTER_MERGING_ACROSS_HIERARCHIES Auto
set_global_assignment -name AUTO_CLOCK_ENABLE_RECOGNITION On
set_global_assignment -name STRICT_RAM_RECOGNITION Off
set_global_assignment -name ALLOW_SYNCH_CTRL_USAGE On
set_global_assignment -name FORCE_SYNCH_CLEAR Off
set_global_assignment -name AUTO_RAM_BLOCK_BALANCING On
set_global_assignment -name AUTO_RAM_TO_LCELL_CONVERSION Off
set_global_assignment -name AUTO_RESOURCE_SHARING Off
set_global_assignment -name ALLOW_ANY_RAM_SIZE_FOR_RECOGNITION Off
set_global_assignment -name ALLOW_ANY_ROM_SIZE_FOR_RECOGNITION Off
set_global_assignment -name ALLOW_ANY_SHIFT_REGISTER_SIZE_FOR_RECOGNITION Off
set_global_assignment -name MAX7000_FANIN_PER_CELL 100
set_global_assignment -name USE_LOGICLOCK_CONSTRAINTS_IN_BALANCING On
set_global_assignment -name MAX_RAM_BLOCKS_M512 "-1 (Unlimited)"
set_global_assignment -name MAX_RAM_BLOCKS_M4K "-1 (Unlimited)"
set_global_assignment -name MAX_RAM_BLOCKS_MRAM "-1 (Unlimited)"
set_global_assignment -name IGNORE_TRANSLATE_OFF_AND_SYNTHESIS_OFF Off
set_global_assignment -name STRATIXGX_BYPASS_REMAPPING_OF_FORCE_SIGNAL_DETECT_SIGNAL_THRESHOLD_SELECT Off
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Arria II GZ"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Arria V"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Cyclone 10 LP"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "MAX 10"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Cyclone IV GX"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Stratix IV"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Cyclone IV E"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Arria 10"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Stratix V"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Arria V GZ"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Cyclone V"
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS On -family "Arria II GX"
set_global_assignment -name REPORT_PARAMETER_SETTINGS On
set_global_assignment -name REPORT_SOURCE_ASSIGNMENTS On
set_global_assignment -name REPORT_CONNECTIVITY_CHECKS On
set_global_assignment -name IGNORE_MAX_FANOUT_ASSIGNMENTS Off
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Arria V"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2 -family "Cyclone 10 LP"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2 -family "MAX 10"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2 -family "Cyclone IV E"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Stratix IV"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Arria 10"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2 -family "MAX V"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Stratix V"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2 -family "MAX II"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Arria V GZ"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Arria II GX"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Arria II GZ"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 2 -family "Cyclone IV GX"
set_global_assignment -name SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 3 -family "Cyclone V"
set_global_assignment -name OPTIMIZE_POWER_DURING_SYNTHESIS "Normal compilation"
set_global_assignment -name HDL_MESSAGE_LEVEL Level2
set_global_assignment -name USE_HIGH_SPEED_ADDER Auto
set_global_assignment -name NUMBER_OF_PROTECTED_REGISTERS_REPORTED 100
set_global_assignment -name NUMBER_OF_REMOVED_REGISTERS_REPORTED 5000
set_global_assignment -name NUMBER_OF_SYNTHESIS_MIGRATION_ROWS 5000
set_global_assignment -name SYNTHESIS_S10_MIGRATION_CHECKS Off
set_global_assignment -name NUMBER_OF_SWEPT_NODES_REPORTED 5000
set_global_assignment -name NUMBER_OF_INVERTED_REGISTERS_REPORTED 100
set_global_assignment -name SYNTH_CLOCK_MUX_PROTECTION On
set_global_assignment -name SYNTH_GATED_CLOCK_CONVERSION Off
set_global_assignment -name BLOCK_DESIGN_NAMING Auto
set_global_assignment -name SYNTH_PROTECT_SDC_CONSTRAINT Off
set_global_assignment -name SYNTHESIS_EFFORT Auto
set_global_assignment -name SHIFT_REGISTER_RECOGNITION_ACLR_SIGNAL On
set_global_assignment -name PRE_MAPPING_RESYNTHESIS Off
set_global_assignment -name SYNTH_MESSAGE_LEVEL Medium
set_global_assignment -name DISABLE_REGISTER_MERGING_ACROSS_HIERARCHIES Auto
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Arria II GZ"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Arria V"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Cyclone 10 LP"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "MAX 10"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Cyclone IV GX"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Stratix IV"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Cyclone IV E"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Arria 10"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Stratix V"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Arria V GZ"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Cyclone V"
set_global_assignment -name SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM On -family "Arria II GX"
set_global_assignment -name MAX_LABS "-1 (Unlimited)"
set_global_assignment -name RBCGEN_CRITICAL_WARNING_TO_ERROR On
set_global_assignment -name MAX_NUMBER_OF_REGISTERS_FROM_UNINFERRED_RAMS "-1 (Unlimited)"
set_global_assignment -name AUTO_PARALLEL_SYNTHESIS On
set_global_assignment -name PRPOF_ID Off
set_global_assignment -name DISABLE_DSP_NEGATE_INFERENCING Off
set_global_assignment -name REPORT_PARAMETER_SETTINGS_PRO On
set_global_assignment -name REPORT_SOURCE_ASSIGNMENTS_PRO On
set_global_assignment -name ENABLE_STATE_MACHINE_INFERENCE Off
set_global_assignment -name FLEX10K_ENABLE_LOCK_OUTPUT Off
set_global_assignment -name AUTO_MERGE_PLLS On
set_global_assignment -name IGNORE_MODE_FOR_MERGE Off
set_global_assignment -name TXPMA_SLEW_RATE Low
set_global_assignment -name ADCE_ENABLED Auto
set_global_assignment -name ROUTER_TIMING_OPTIMIZATION_LEVEL Normal
set_global_assignment -name ROUTER_CLOCKING_TOPOLOGY_ANALYSIS Off
set_global_assignment -name PLACEMENT_EFFORT_MULTIPLIER 1.0
set_global_assignment -name ROUTER_EFFORT_MULTIPLIER 1.0
set_global_assignment -name FIT_ATTEMPTS_TO_SKIP 0.0
set_global_assignment -name PHYSICAL_SYNTHESIS Off
set_global_assignment -name ECO_ALLOW_ROUTING_CHANGES Off
set_global_assignment -name DEVICE AUTO
set_global_assignment -name BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE Off
set_global_assignment -name ENABLE_JTAG_BST_SUPPORT Off
set_global_assignment -name MAX7000_ENABLE_JTAG_BST_SUPPORT On
set_global_assignment -name ENABLE_NCEO_OUTPUT Off
set_global_assignment -name RESERVE_NCEO_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "Use as programming pin"
set_global_assignment -name STRATIXIII_UPDATE_MODE Standard
set_global_assignment -name STRATIX_UPDATE_MODE Standard
set_global_assignment -name INTERNAL_FLASH_UPDATE_MODE "Single Image"
set_global_assignment -name CVP_MODE Off
set_global_assignment -name STRATIXV_CONFIGURATION_SCHEME "Passive Serial" -family "Arria V"
set_global_assignment -name STRATIXV_CONFIGURATION_SCHEME "Passive Serial" -family "Arria 10"
set_global_assignment -name STRATIXV_CONFIGURATION_SCHEME "Passive Serial" -family "Stratix V"
set_global_assignment -name STRATIXV_CONFIGURATION_SCHEME "Passive Serial" -family "Arria V GZ"
set_global_assignment -name STRATIXV_CONFIGURATION_SCHEME "Passive Serial" -family "Cyclone V"
set_global_assignment -name VID_OPERATION_MODE "PMBus Slave"
set_global_assignment -name USE_CONF_DONE AUTO
set_global_assignment -name USE_PWRMGT_SCL AUTO
set_global_assignment -name USE_PWRMGT_SDA AUTO
set_global_assignment -name USE_PWRMGT_ALERT AUTO
set_global_assignment -name USE_INIT_DONE AUTO
set_global_assignment -name USE_CVP_CONFDONE AUTO
set_global_assignment -name USE_SEU_ERROR AUTO
set_global_assignment -name RESERVE_AVST_CLK_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_AVST_VALID_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_AVST_DATA15_THROUGH_DATA0_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_AVST_DATA31_THROUGH_DATA16_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name STRATIXIII_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name MAX10FPGA_CONFIGURATION_SCHEME "Internal Configuration"
set_global_assignment -name CYCLONEIII_CONFIGURATION_SCHEME "Active Serial"
set_global_assignment -name STRATIXII_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name CYCLONEII_CONFIGURATION_SCHEME "Active Serial"
set_global_assignment -name APEX20K_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name STRATIX_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "Active Serial"
set_global_assignment -name MERCURY_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name FLEX6K_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name FLEX10K_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name APEXII_CONFIGURATION_SCHEME "Passive Serial"
set_global_assignment -name USER_START_UP_CLOCK Off
set_global_assignment -name ENABLE_UNUSED_RX_CLOCK_WORKAROUND Off
set_global_assignment -name PRESERVE_UNUSED_XCVR_CHANNEL Off
set_global_assignment -name IGNORE_HSSI_COLUMN_POWER_WHEN_PRESERVING_UNUSED_XCVR_CHANNELS On
set_global_assignment -name AUTO_RESERVE_CLKUSR_FOR_CALIBRATION On
set_global_assignment -name DEVICE_INITIALIZATION_CLOCK INIT_INTOSC
set_global_assignment -name ENABLE_VREFA_PIN Off
set_global_assignment -name ENABLE_VREFB_PIN Off
set_global_assignment -name ALWAYS_ENABLE_INPUT_BUFFERS Off
set_global_assignment -name ENABLE_ASMI_FOR_FLASH_LOADER Off
set_global_assignment -name ENABLE_DEVICE_WIDE_RESET Off
set_global_assignment -name ENABLE_DEVICE_WIDE_OE Off
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "As output driving ground"
set_global_assignment -name ENABLE_INIT_DONE_OUTPUT Off
set_global_assignment -name INIT_DONE_OPEN_DRAIN On
set_global_assignment -name RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_RDYNBUSY_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA31_THROUGH_DATA16_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA15_THROUGH_DATA8_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "As input tri-stated"
set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "As input tri-stated"
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA2_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA5_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "As input tri-stated"
set_global_assignment -name RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION "Use as regular IO"
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "Use as programming pin"
set_global_assignment -name ENABLE_CONFIGURATION_PINS On
set_global_assignment -name ENABLE_JTAG_PIN_SHARING Off
set_global_assignment -name ENABLE_NCE_PIN Off
set_global_assignment -name ENABLE_BOOT_SEL_PIN On
set_global_assignment -name CRC_ERROR_CHECKING Off
set_global_assignment -name INTERNAL_SCRUBBING Off
set_global_assignment -name PR_ERROR_OPEN_DRAIN On
set_global_assignment -name PR_READY_OPEN_DRAIN On
set_global_assignment -name ENABLE_CVP_CONFDONE Off
set_global_assignment -name CVP_CONFDONE_OPEN_DRAIN On
set_global_assignment -name ENABLE_NCONFIG_FROM_CORE On
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Arria II GZ"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Arria V"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Cyclone 10 LP"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "MAX 10"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Cyclone IV GX"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Stratix IV"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Cyclone IV E"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Arria 10"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "MAX V"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Stratix V"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO Paths and Minimum TPD Paths" -family "MAX II"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Arria V GZ"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Cyclone V"
set_global_assignment -name OPTIMIZE_HOLD_TIMING "All Paths" -family "Arria II GX"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Arria V"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Cyclone 10 LP"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "MAX 10"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Cyclone IV E"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Stratix IV"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Arria 10"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING Off -family "MAX V"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Stratix V"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Arria V GZ"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING Off -family "MAX II"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Arria II GX"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Arria II GZ"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Cyclone IV GX"
set_global_assignment -name OPTIMIZE_MULTI_CORNER_TIMING On -family "Cyclone V"
set_global_assignment -name BLOCK_RAM_TO_MLAB_CELL_CONVERSION On
set_global_assignment -name BLOCK_RAM_AND_MLAB_EQUIVALENT_POWER_UP_CONDITIONS Auto
set_global_assignment -name BLOCK_RAM_AND_MLAB_EQUIVALENT_PAUSED_READ_CAPABILITIES Care
set_global_assignment -name PROGRAMMABLE_POWER_TECHNOLOGY_SETTING Automatic -family "Stratix IV"
set_global_assignment -name PROGRAMMABLE_POWER_TECHNOLOGY_SETTING Automatic -family "Arria 10"
set_global_assignment -name PROGRAMMABLE_POWER_TECHNOLOGY_SETTING Automatic -family "Stratix V"
set_global_assignment -name PROGRAMMABLE_POWER_TECHNOLOGY_SETTING Automatic -family "Arria V GZ"
set_global_assignment -name PROGRAMMABLE_POWER_MAXIMUM_HIGH_SPEED_FRACTION_OF_USED_LAB_TILES 1.0
set_global_assignment -name GUARANTEE_MIN_DELAY_CORNER_IO_ZERO_HOLD_TIME On
set_global_assignment -name OPTIMIZE_POWER_DURING_FITTING "Normal compilation"
set_global_assignment -name OPTIMIZE_SSN Off
set_global_assignment -name OPTIMIZE_TIMING "Normal compilation"
set_global_assignment -name ECO_OPTIMIZE_TIMING Off
set_global_assignment -name ECO_REGENERATE_REPORT Off
set_global_assignment -name OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING Normal
set_global_assignment -name FIT_ONLY_ONE_ATTEMPT Off
set_global_assignment -name FINAL_PLACEMENT_OPTIMIZATION Automatically
set_global_assignment -name FITTER_AGGRESSIVE_ROUTABILITY_OPTIMIZATION Automatically
set_global_assignment -name SEED 1
set_global_assignment -name PERIPHERY_TO_CORE_PLACEMENT_AND_ROUTING_OPTIMIZATION OFF
set_global_assignment -name RESERVE_ROUTING_OUTPUT_FLEXIBILITY Off
set_global_assignment -name SLOW_SLEW_RATE Off
set_global_assignment -name PCI_IO Off
set_global_assignment -name TURBO_BIT On
set_global_assignment -name WEAK_PULL_UP_RESISTOR Off
set_global_assignment -name ENABLE_BUS_HOLD_CIRCUITRY Off
set_global_assignment -name AUTO_GLOBAL_MEMORY_CONTROLS Off
set_global_assignment -name MIGRATION_CONSTRAIN_CORE_RESOURCES On
set_global_assignment -name QII_AUTO_PACKED_REGISTERS Auto
set_global_assignment -name AUTO_PACKED_REGISTERS_MAX Auto
set_global_assignment -name NORMAL_LCELL_INSERT On
set_global_assignment -name CARRY_OUT_PINS_LCELL_INSERT On
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Arria V"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Cyclone 10 LP"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "MAX 10"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Stratix IV"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Cyclone IV E"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Arria 10"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "MAX V"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Stratix V"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "MAX II"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Arria V GZ"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Arria II GX"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Arria II GZ"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Cyclone IV GX"
set_global_assignment -name AUTO_DELAY_CHAINS On -family "Cyclone V"
set_global_assignment -name AUTO_DELAY_CHAINS_FOR_HIGH_FANOUT_INPUT_PINS OFF
set_global_assignment -name XSTL_INPUT_ALLOW_SE_BUFFER Off
set_global_assignment -name TREAT_BIDIR_AS_OUTPUT Off
set_global_assignment -name AUTO_TURBO_BIT ON
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC_FOR_AREA Off
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC Off
set_global_assignment -name PHYSICAL_SYNTHESIS_LOG_FILE Off
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION Off
set_global_assignment -name PHYSICAL_SYNTHESIS_MAP_LOGIC_TO_MEMORY_FOR_AREA Off
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING Off
set_global_assignment -name PHYSICAL_SYNTHESIS_ASYNCHRONOUS_SIGNAL_PIPELINING Off
set_global_assignment -name IO_PLACEMENT_OPTIMIZATION On
set_global_assignment -name ALLOW_LVTTL_LVCMOS_INPUT_LEVELS_TO_OVERDRIVE_INPUT_BUFFER Off
set_global_assignment -name OVERRIDE_DEFAULT_ELECTROMIGRATION_PARAMETERS Off
set_global_assignment -name FITTER_EFFORT "Auto Fit"
set_global_assignment -name FITTER_AUTO_EFFORT_DESIRED_SLACK_MARGIN 0ns
set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT Normal
set_global_assignment -name ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION Auto
set_global_assignment -name ROUTER_REGISTER_DUPLICATION Auto
set_global_assignment -name STRATIXGX_ALLOW_CLOCK_FANOUT_WITH_ANALOG_RESET Off
set_global_assignment -name AUTO_GLOBAL_CLOCK On
set_global_assignment -name AUTO_GLOBAL_OE On
set_global_assignment -name AUTO_GLOBAL_REGISTER_CONTROLS On
set_global_assignment -name FITTER_EARLY_TIMING_ESTIMATE_MODE Realistic
set_global_assignment -name STRATIXGX_ALLOW_GIGE_UNDER_FULL_DATARATE_RANGE Off
set_global_assignment -name STRATIXGX_ALLOW_RX_CORECLK_FROM_NON_RX_CLKOUT_SOURCE_IN_DOUBLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_IN_DOUBLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_PARALLEL_LOOPBACK_IN_DOUBLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_XAUI_IN_SINGLE_DATA_WIDTH_MODE Off
set_global_assignment -name STRATIXGX_ALLOW_XAUI_WITH_CORECLK_SELECTED_AT_RATE_MATCHER Off
set_global_assignment -name STRATIXGX_ALLOW_XAUI_WITH_RX_CORECLK_FROM_NON_TXPLL_SOURCE Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITH_CORECLK_SELECTED_AT_RATE_MATCHER Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITHOUT_8B10B Off
set_global_assignment -name STRATIXGX_ALLOW_GIGE_WITH_RX_CORECLK_FROM_NON_TXPLL_SOURCE Off
set_global_assignment -name STRATIXGX_ALLOW_POST8B10B_LOOPBACK Off
set_global_assignment -name STRATIXGX_ALLOW_REVERSE_PARALLEL_LOOPBACK Off
set_global_assignment -name STRATIXGX_ALLOW_USE_OF_GXB_COUPLED_IOS Off
set_global_assignment -name GENERATE_GXB_RECONFIG_MIF Off
set_global_assignment -name GENERATE_GXB_RECONFIG_MIF_WITH_PLL Off
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_WEAK_PULLUP "As input tri-stated with weak pull-up"
set_global_assignment -name ENABLE_HOLD_BACK_OFF On
set_global_assignment -name CONFIGURATION_VCCIO_LEVEL Auto
set_global_assignment -name FORCE_CONFIGURATION_VCCIO Off
set_global_assignment -name SYNCHRONIZER_IDENTIFICATION Auto
set_global_assignment -name ENABLE_BENEFICIAL_SKEW_OPTIMIZATION On
set_global_assignment -name OPTIMIZE_FOR_METASTABILITY On
set_global_assignment -name CRC_ERROR_OPEN_DRAIN On -family "Arria V"
set_global_assignment -name CRC_ERROR_OPEN_DRAIN Off -family "Cyclone 10 LP"
set_global_assignment -name CRC_ERROR_OPEN_DRAIN Off -family "MAX 10"
set_global_assignment -name CRC_ERROR_OPEN_DRAIN Off -family "Cyclone IV E"
set_global_assignment -name CRC_ERROR_OPEN_DRAIN On -family "Arria 10"
set_global_assignment -name CRC_ERROR_OPEN_DRAIN On -family "Stratix V"
set_global_assignment -name CRC_ERROR_OPEN_DRAIN On -family "Arria V GZ"
set_global_assignment -name CRC_ERROR_OPEN_DRAIN On -family "Cyclone V"
set_global_assignment -name MAX_GLOBAL_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name MAX_REGIONAL_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name MAX_PERIPHERY_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name MAX_CLOCKS_ALLOWED "-1 (Unlimited)"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_100MHz -family "Arria 10"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_100MHz -family "Arria V"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_100MHz -family "Stratix V"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_40MHz -family "Cyclone IV GX"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_100MHz -family "Arria V GZ"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_100MHz -family "Cyclone V"
set_global_assignment -name ACTIVE_SERIAL_CLOCK FREQ_40MHz -family "Arria II GX"
set_global_assignment -name M144K_BLOCK_READ_CLOCK_DUTY_CYCLE_DEPENDENCY Off
set_global_assignment -name STRATIXIII_MRAM_COMPATIBILITY On
set_global_assignment -name FORCE_FITTER_TO_AVOID_PERIPHERY_PLACEMENT_WARNINGS Off
set_global_assignment -name AUTO_C3_M9K_BIT_SKIP Off
set_global_assignment -name PR_DONE_OPEN_DRAIN On
set_global_assignment -name NCEO_OPEN_DRAIN On
set_global_assignment -name ENABLE_CRC_ERROR_PIN Off
set_global_assignment -name ENABLE_PR_PINS Off
set_global_assignment -name RESERVE_PR_PINS Off
set_global_assignment -name CONVERT_PR_WARNINGS_TO_ERRORS Off
set_global_assignment -name PR_PINS_OPEN_DRAIN Off
set_global_assignment -name CLAMPING_DIODE Off
set_global_assignment -name TRI_STATE_SPI_PINS Off
set_global_assignment -name UNUSED_TSD_PINS_GND Off
set_global_assignment -name IMPLEMENT_MLAB_IN_16_BIT_DEEP_MODE Off
set_global_assignment -name FORM_DDR_CLUSTERING_CLIQUE Off
set_global_assignment -name ALM_REGISTER_PACKING_EFFORT Medium
set_global_assignment -name ADVANCED_PHYSICAL_OPTIMIZATION On -family "Arria V"
set_global_assignment -name ADVANCED_PHYSICAL_OPTIMIZATION Off -family "Stratix IV"
set_global_assignment -name ADVANCED_PHYSICAL_OPTIMIZATION On -family "Arria 10"
set_global_assignment -name ADVANCED_PHYSICAL_OPTIMIZATION On -family "Stratix V"
set_global_assignment -name ADVANCED_PHYSICAL_OPTIMIZATION On -family "Arria V GZ"
set_global_assignment -name ADVANCED_PHYSICAL_OPTIMIZATION On -family "Cyclone V"
set_global_assignment -name RELATIVE_NEUTRON_FLUX 1.0
set_global_assignment -name SEU_FIT_REPORT Off
set_global_assignment -name HYPER_RETIMER Off -family "Arria 10"
set_global_assignment -name HYPER_RETIMER_FAST_FORWARD_ADD_PIPELINING_MAX "-1"
set_global_assignment -name HYPER_RETIMER_FAST_FORWARD_ASYNCH_CLEAR Auto
set_global_assignment -name HYPER_RETIMER_FAST_FORWARD_USER_PRESERVE_RESTRICTION Auto
set_global_assignment -name HYPER_RETIMER_FAST_FORWARD_DSP_BLOCKS On
set_global_assignment -name HYPER_RETIMER_FAST_FORWARD_RAM_BLOCKS On
set_global_assignment -name EDA_SIMULATION_TOOL "<None>"
set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_TIMING_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_SYMBOL_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_SIGNAL_INTEGRITY_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_BOUNDARY_SCAN_TOOL "<None>"
set_global_assignment -name EDA_BOARD_DESIGN_TOOL "<None>"
set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL "<None>"
set_global_assignment -name EDA_RESYNTHESIS_TOOL "<None>"
set_global_assignment -name ON_CHIP_BITSTREAM_DECOMPRESSION On
set_global_assignment -name COMPRESSION_MODE Off
set_global_assignment -name CLOCK_SOURCE Internal
set_global_assignment -name CONFIGURATION_CLOCK_FREQUENCY "10 MHz"
set_global_assignment -name CONFIGURATION_CLOCK_DIVISOR 1
set_global_assignment -name ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE On
set_global_assignment -name FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE Off
set_global_assignment -name FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE On
set_global_assignment -name MAX7000S_JTAG_USER_CODE FFFF
set_global_assignment -name STRATIX_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name APEX20K_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name MERCURY_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name FLEX10K_JTAG_USER_CODE 7F
set_global_assignment -name MAX7000_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name MAX7000_USE_CHECKSUM_AS_USERCODE Off
set_global_assignment -name USE_CHECKSUM_AS_USERCODE On
set_global_assignment -name SECURITY_BIT Off
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Cyclone 10 LP"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "MAX 10"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Cyclone IV E"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Stratix IV"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "MAX V"
set_global_assignment -name USE_CONFIGURATION_DEVICE On -family "MAX II"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Arria II GX"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Arria II GZ"
set_global_assignment -name USE_CONFIGURATION_DEVICE Off -family "Cyclone IV GX"
set_global_assignment -name CYCLONEIII_CONFIGURATION_DEVICE Auto
set_global_assignment -name STRATIXII_CONFIGURATION_DEVICE Auto
set_global_assignment -name PWRMGT_SLAVE_DEVICE_TYPE "PV3102 or EM1130"
set_global_assignment -name PWRMGT_SLAVE_DEVICE0_ADDRESS 0000000
set_global_assignment -name PWRMGT_SLAVE_DEVICE1_ADDRESS 0000000
set_global_assignment -name PWRMGT_SLAVE_DEVICE2_ADDRESS 0000000
set_global_assignment -name PWRMGT_SLAVE_DEVICE3_ADDRESS 0000000
set_global_assignment -name PWRMGT_SLAVE_DEVICE4_ADDRESS 0000000
set_global_assignment -name PWRMGT_SLAVE_DEVICE5_ADDRESS 0000000
set_global_assignment -name PWRMGT_SLAVE_DEVICE6_ADDRESS 0000000
set_global_assignment -name PWRMGT_SLAVE_DEVICE7_ADDRESS 0000000
set_global_assignment -name PWRMGT_VOLTAGE_OUTPUT_FORMAT "Auto discovery"
set_global_assignment -name PWRMGT_DIRECT_FORMAT_COEFFICIENT_M 0
set_global_assignment -name PWRMGT_DIRECT_FORMAT_COEFFICIENT_B 0
set_global_assignment -name PWRMGT_DIRECT_FORMAT_COEFFICIENT_R 0
set_global_assignment -name APEX20K_CONFIGURATION_DEVICE Auto
set_global_assignment -name MERCURY_CONFIGURATION_DEVICE Auto
set_global_assignment -name FLEX6K_CONFIGURATION_DEVICE Auto
set_global_assignment -name FLEX10K_CONFIGURATION_DEVICE Auto
set_global_assignment -name CYCLONE_CONFIGURATION_DEVICE Auto
set_global_assignment -name STRATIX_CONFIGURATION_DEVICE Auto
set_global_assignment -name APEX20K_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name STRATIX_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name MERCURY_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE FFFFFFFF
set_global_assignment -name EPROM_USE_CHECKSUM_AS_USERCODE Off
set_global_assignment -name AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE On
set_global_assignment -name DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE Off
set_global_assignment -name GENERATE_TTF_FILE Off
set_global_assignment -name GENERATE_RBF_FILE Off
set_global_assignment -name GENERATE_HEX_FILE Off
set_global_assignment -name HEXOUT_FILE_START_ADDRESS 0
set_global_assignment -name HEXOUT_FILE_COUNT_DIRECTION Up
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "As output driving an unspecified signal"
set_global_assignment -name RELEASE_CLEARS_BEFORE_TRI_STATES Off
set_global_assignment -name AUTO_RESTART_CONFIGURATION On
set_global_assignment -name HARDCOPYII_POWER_ON_EXTRA_DELAY Off
set_global_assignment -name STRATIXII_MRAM_COMPATIBILITY Off
set_global_assignment -name CYCLONEII_M4K_COMPATIBILITY On
set_global_assignment -name ENABLE_OCT_DONE Off -family "Arria V"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Cyclone 10 LP"
set_global_assignment -name ENABLE_OCT_DONE On -family "MAX 10"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Cyclone IV E"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Arria 10"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Stratix V"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Arria V GZ"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Arria II GX"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Cyclone IV GX"
set_global_assignment -name ENABLE_OCT_DONE Off -family "Cyclone V"
set_global_assignment -name USE_CHECKERED_PATTERN_AS_UNINITIALIZED_RAM_CONTENT OFF
set_global_assignment -name ARRIAIIGX_RX_CDR_LOCKUP_FIX_OVERRIDE Off
set_global_assignment -name ENABLE_AUTONOMOUS_PCIE_HIP Off
set_global_assignment -name ENABLE_ADV_SEU_DETECTION Off
set_global_assignment -name POR_SCHEME "Instant ON"
set_global_assignment -name EN_USER_IO_WEAK_PULLUP On
set_global_assignment -name EN_SPI_IO_WEAK_PULLUP On
set_global_assignment -name POF_VERIFY_PROTECT Off
set_global_assignment -name ENABLE_SPI_MODE_CHECK Off
set_global_assignment -name FORCE_SSMCLK_TO_ISMCLK On
set_global_assignment -name FALLBACK_TO_EXTERNAL_FLASH Off
set_global_assignment -name EXTERNAL_FLASH_FALLBACK_ADDRESS 0
set_global_assignment -name GENERATE_PMSF_FILES On
set_global_assignment -name START_TIME 0ns
set_global_assignment -name SIMULATION_MODE TIMING
set_global_assignment -name AUTO_USE_SIMULATION_PDB_NETLIST Off
set_global_assignment -name ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS On
set_global_assignment -name SETUP_HOLD_DETECTION Off
set_global_assignment -name SETUP_HOLD_DETECTION_INPUT_REGISTERS_BIDIR_PINS_DISABLED Off
set_global_assignment -name CHECK_OUTPUTS Off
set_global_assignment -name SIMULATION_COVERAGE On
set_global_assignment -name SIMULATION_COMPLETE_COVERAGE_REPORT_PANEL On
set_global_assignment -name SIMULATION_MISSING_1_VALUE_COVERAGE_REPORT_PANEL On
set_global_assignment -name SIMULATION_MISSING_0_VALUE_COVERAGE_REPORT_PANEL On
set_global_assignment -name GLITCH_DETECTION Off
set_global_assignment -name GLITCH_INTERVAL 1ns
set_global_assignment -name SIMULATOR_GENERATE_SIGNAL_ACTIVITY_FILE Off
set_global_assignment -name SIMULATION_WITH_GLITCH_FILTERING_WHEN_GENERATING_SAF On
set_global_assignment -name SIMULATION_BUS_CHANNEL_GROUPING Off
set_global_assignment -name SIMULATION_VDB_RESULT_FLUSH On
set_global_assignment -name VECTOR_COMPARE_TRIGGER_MODE INPUT_EDGE
set_global_assignment -name SIMULATION_NETLIST_VIEWER Off
set_global_assignment -name SIMULATION_INTERCONNECT_DELAY_MODEL_TYPE TRANSPORT
set_global_assignment -name SIMULATION_CELL_DELAY_MODEL_TYPE TRANSPORT
set_global_assignment -name SIMULATOR_GENERATE_POWERPLAY_VCD_FILE Off
set_global_assignment -name SIMULATOR_PVT_TIMING_MODEL_TYPE AUTO
set_global_assignment -name SIMULATION_WITH_AUTO_GLITCH_FILTERING AUTO
set_global_assignment -name DRC_TOP_FANOUT 50
set_global_assignment -name DRC_FANOUT_EXCEEDING 30
set_global_assignment -name DRC_GATED_CLOCK_FEED 30
set_global_assignment -name HARDCOPY_FLOW_AUTOMATION MIGRATION_ONLY
set_global_assignment -name ENABLE_DRC_SETTINGS Off
set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES_THRESHOLD 25
set_global_assignment -name DRC_DETAIL_MESSAGE_LIMIT 10
set_global_assignment -name DRC_VIOLATION_MESSAGE_LIMIT 30
set_global_assignment -name DRC_DEADLOCK_STATE_LIMIT 2
set_global_assignment -name MERGE_HEX_FILE Off
set_global_assignment -name GENERATE_SVF_FILE Off
set_global_assignment -name GENERATE_ISC_FILE Off
set_global_assignment -name GENERATE_JAM_FILE Off
set_global_assignment -name GENERATE_JBC_FILE Off
set_global_assignment -name GENERATE_JBC_FILE_COMPRESSED On
set_global_assignment -name GENERATE_CONFIG_SVF_FILE Off
set_global_assignment -name GENERATE_CONFIG_ISC_FILE Off
set_global_assignment -name GENERATE_CONFIG_JAM_FILE Off
set_global_assignment -name GENERATE_CONFIG_JBC_FILE Off
set_global_assignment -name GENERATE_CONFIG_JBC_FILE_COMPRESSED On
set_global_assignment -name GENERATE_CONFIG_HEXOUT_FILE Off
set_global_assignment -name ISP_CLAMP_STATE_DEFAULT "Tri-state"
set_global_assignment -name HPS_EARLY_IO_RELEASE Off
set_global_assignment -name SIGNALPROBE_ALLOW_OVERUSE Off
set_global_assignment -name SIGNALPROBE_DURING_NORMAL_COMPILATION Off
set_global_assignment -name POWER_DEFAULT_TOGGLE_RATE 12.5%
set_global_assignment -name POWER_DEFAULT_INPUT_IO_TOGGLE_RATE 12.5%
set_global_assignment -name POWER_USE_PVA On
set_global_assignment -name POWER_USE_INPUT_FILE "No File"
set_global_assignment -name POWER_USE_INPUT_FILES Off
set_global_assignment -name POWER_VCD_FILTER_GLITCHES On
set_global_assignment -name POWER_REPORT_SIGNAL_ACTIVITY Off
set_global_assignment -name POWER_REPORT_POWER_DISSIPATION Off
set_global_assignment -name POWER_USE_DEVICE_CHARACTERISTICS TYPICAL
set_global_assignment -name POWER_AUTO_COMPUTE_TJ On
set_global_assignment -name POWER_TJ_VALUE 25
set_global_assignment -name POWER_USE_TA_VALUE 25
set_global_assignment -name POWER_USE_CUSTOM_COOLING_SOLUTION Off
set_global_assignment -name POWER_BOARD_TEMPERATURE 25
set_global_assignment -name POWER_HPS_ENABLE Off
set_global_assignment -name POWER_HPS_PROC_FREQ 0.0
set_global_assignment -name ENABLE_SMART_VOLTAGE_ID Off
set_global_assignment -name IGNORE_PARTITIONS Off
set_global_assignment -name AUTO_EXPORT_INCREMENTAL_COMPILATION Off
set_global_assignment -name RAPID_RECOMPILE_ASSIGNMENT_CHECKING On
set_global_assignment -name OUTPUT_IO_TIMING_ENDPOINT "Near End"
set_global_assignment -name RTLV_REMOVE_FANOUT_FREE_REGISTERS On
set_global_assignment -name RTLV_SIMPLIFIED_LOGIC On
set_global_assignment -name RTLV_GROUP_RELATED_NODES On
set_global_assignment -name RTLV_GROUP_COMB_LOGIC_IN_CLOUD Off
set_global_assignment -name RTLV_GROUP_COMB_LOGIC_IN_CLOUD_TMV Off
set_global_assignment -name RTLV_GROUP_RELATED_NODES_TMV On
set_global_assignment -name EQC_CONSTANT_DFF_DETECTION On
set_global_assignment -name EQC_DUPLICATE_DFF_DETECTION On
set_global_assignment -name EQC_BBOX_MERGE On
set_global_assignment -name EQC_LVDS_MERGE On
set_global_assignment -name EQC_RAM_UNMERGING On
set_global_assignment -name EQC_DFF_SS_EMULATION On
set_global_assignment -name EQC_RAM_REGISTER_UNPACK On
set_global_assignment -name EQC_MAC_REGISTER_UNPACK On
set_global_assignment -name EQC_SET_PARTITION_BB_TO_VCC_GND On
set_global_assignment -name EQC_STRUCTURE_MATCHING On
set_global_assignment -name EQC_AUTO_BREAK_CONE On
set_global_assignment -name EQC_POWER_UP_COMPARE Off
set_global_assignment -name EQC_AUTO_COMP_LOOP_CUT On
set_global_assignment -name EQC_AUTO_INVERSION On
set_global_assignment -name EQC_AUTO_TERMINATE On
set_global_assignment -name EQC_SUB_CONE_REPORT Off
set_global_assignment -name EQC_RENAMING_RULES On
set_global_assignment -name EQC_PARAMETER_CHECK On
set_global_assignment -name EQC_AUTO_PORTSWAP On
set_global_assignment -name EQC_DETECT_DONT_CARES On
set_global_assignment -name EQC_SHOW_ALL_MAPPED_POINTS Off
set_global_assignment -name EDA_INPUT_GND_NAME GND -section_id ?
set_global_assignment -name EDA_INPUT_VCC_NAME VCC -section_id ?
set_global_assignment -name EDA_INPUT_DATA_FORMAT NONE -section_id ?
set_global_assignment -name EDA_SHOW_LMF_MAPPING_MESSAGES Off -section_id ?
set_global_assignment -name EDA_RUN_TOOL_AUTOMATICALLY Off -section_id ?
set_global_assignment -name RESYNTHESIS_RETIMING FULL -section_id ?
set_global_assignment -name RESYNTHESIS_OPTIMIZATION_EFFORT Normal -section_id ?
set_global_assignment -name RESYNTHESIS_PHYSICAL_SYNTHESIS Normal -section_id ?
set_global_assignment -name USE_GENERATED_PHYSICAL_CONSTRAINTS On -section_id ?
set_global_assignment -name VCCPD_VOLTAGE 3.3V -section_id ?
set_global_assignment -name EDA_USER_COMPILED_SIMULATION_LIBRARY_DIRECTORY "<None>" -section_id ?
set_global_assignment -name EDA_LAUNCH_CMD_LINE_TOOL Off -section_id ?
set_global_assignment -name EDA_ENABLE_IPUTF_MODE On -section_id ?
set_global_assignment -name EDA_NATIVELINK_PORTABLE_FILE_PATHS Off -section_id ?
set_global_assignment -name EDA_NATIVELINK_GENERATE_SCRIPT_ONLY Off -section_id ?
set_global_assignment -name EDA_WAIT_FOR_GUI_TOOL_COMPLETION Off -section_id ?
set_global_assignment -name EDA_TRUNCATE_LONG_HIERARCHY_PATHS Off -section_id ?
set_global_assignment -name EDA_FLATTEN_BUSES Off -section_id ?
set_global_assignment -name EDA_MAP_ILLEGAL_CHARACTERS Off -section_id ?
set_global_assignment -name EDA_GENERATE_TIMING_CLOSURE_DATA Off -section_id ?
set_global_assignment -name EDA_GENERATE_POWER_INPUT_FILE Off -section_id ?
set_global_assignment -name EDA_TEST_BENCH_ENABLE_STATUS NOT_USED -section_id ?
set_global_assignment -name EDA_RTL_SIM_MODE NOT_USED -section_id ?
set_global_assignment -name EDA_MAINTAIN_DESIGN_HIERARCHY OFF -section_id ?
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST On -section_id ?
set_global_assignment -name EDA_WRITE_DEVICE_CONTROL_PORTS Off -section_id ?
set_global_assignment -name EDA_SIMULATION_VCD_OUTPUT_TCL_FILE Off -section_id ?
set_global_assignment -name EDA_SIMULATION_VCD_OUTPUT_SIGNALS_TO_TCL_FILE "All Except Combinational Logic Element Outputs" -section_id ?
set_global_assignment -name EDA_ENABLE_GLITCH_FILTERING Off -section_id ?
set_global_assignment -name EDA_WRITE_NODES_FOR_POWER_ESTIMATION OFF -section_id ?
set_global_assignment -name EDA_SETUP_HOLD_DETECTION_INPUT_REGISTERS_BIDIR_PINS_DISABLED Off -section_id ?
set_global_assignment -name EDA_WRITER_DONT_WRITE_TOP_ENTITY Off -section_id ?
set_global_assignment -name EDA_VHDL_ARCH_NAME structure -section_id ?
set_global_assignment -name EDA_IBIS_MODEL_SELECTOR Off -section_id ?
set_global_assignment -name EDA_IBIS_EXTENDED_MODEL_SELECTOR Off -section_id ?
set_global_assignment -name EDA_IBIS_MUTUAL_COUPLING Off -section_id ?
set_global_assignment -name EDA_FORMAL_VERIFICATION_ALLOW_RETIMING Off -section_id ?
set_global_assignment -name EDA_BOARD_BOUNDARY_SCAN_OPERATION PRE_CONFIG -section_id ?
set_global_assignment -name EDA_GENERATE_RTL_SIMULATION_COMMAND_SCRIPT Off -section_id ?
set_global_assignment -name EDA_GENERATE_GATE_LEVEL_SIMULATION_COMMAND_SCRIPT Off -section_id ?
set_global_assignment -name EDA_IBIS_SPECIFICATION_VERSION 4p2 -section_id ?
set_global_assignment -name SIM_VECTOR_COMPARED_CLOCK_OFFSET 0ns -section_id ?
set_global_assignment -name SIM_VECTOR_COMPARED_CLOCK_DUTY_CYCLE 50 -section_id ?
set_global_assignment -name APEX20K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name MAX7K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name MERCURY_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name FLEX6K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name FLEX10K_CLIQUE_TYPE LAB -section_id ? -entity ?
set_global_assignment -name PARTITION_PRESERVE_HIGH_SPEED_TILES On -section_id ? -entity ?
set_global_assignment -name PARTITION_IGNORE_SOURCE_FILE_CHANGES Off -section_id ? -entity ?
set_global_assignment -name PARTITION_ALWAYS_USE_QXP_NETLIST Off -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_ASSIGNMENTS On -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_EXISTING_ASSIGNMENTS REPLACE_CONFLICTING -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_EXISTING_LOGICLOCK_REGIONS UPDATE_CONFLICTING -section_id ? -entity ?
set_global_assignment -name PARTITION_IMPORT_PROMOTE_ASSIGNMENTS On -section_id ? -entity ?
set_global_assignment -name ALLOW_MULTIPLE_PERSONAS Off -section_id ? -entity ?
set_global_assignment -name PARTITION_ASD_REGION_ID 1 -section_id ? -entity ?
set_global_assignment -name CROSS_BOUNDARY_OPTIMIZATIONS Off -section_id ? -entity ?
set_global_assignment -name PROPAGATE_CONSTANTS_ON_INPUTS On -section_id ? -entity ?
set_global_assignment -name PROPAGATE_INVERSIONS_ON_INPUTS On -section_id ? -entity ?
set_global_assignment -name REMOVE_LOGIC_ON_UNCONNECTED_OUTPUTS On -section_id ? -entity ?
set_global_assignment -name MERGE_EQUIVALENT_INPUTS On -section_id ? -entity ?
set_global_assignment -name MERGE_EQUIVALENT_BIDIRS On -section_id ? -entity ?
set_global_assignment -name ABSORB_PATHS_FROM_OUTPUTS_TO_INPUTS On -section_id ? -entity ?
set_global_assignment -name PARTITION_ENABLE_STRICT_PRESERVATION Off -section_id ? -entity ?

View file

@ -0,0 +1,27 @@
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
component pei_lvds_rx
PORT
(
pll_areset : IN STD_LOGIC ;
rx_in : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
rx_inclock : IN STD_LOGIC ;
rx_locked : OUT STD_LOGIC ;
rx_out : OUT STD_LOGIC_VECTOR (27 DOWNTO 0);
rx_outclock : OUT STD_LOGIC
);
end component;

View file

@ -0,0 +1,13 @@
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE pinplan>
<pinplan intended_family="Cyclone 10 LP" variation_name="pei_lvds_rx" megafunction_name="ALTLVDS_RX" specifies="all_ports">
<global>
<pin name="pll_areset" direction="input" scope="external" />
<pin name="rx_in[3..0]" direction="input" scope="external" />
<pin name="rx_inclock" direction="input" scope="external" />
<pin name="rx_locked" direction="output" scope="external" />
<pin name="rx_out[27..0]" direction="output" scope="external" />
<pin name="rx_outclock" direction="output" scope="external" />
</global>
</pinplan>

View file

@ -0,0 +1,7 @@
set_global_assignment -name IP_TOOL_NAME "ALTLVDS_RX"
set_global_assignment -name IP_TOOL_VERSION "20.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "pei_lvds_rx.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pei_lvds_rx_inst.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pei_lvds_rx.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pei_lvds_rx.ppf"]

View file

@ -0,0 +1,295 @@
-- megafunction wizard: %ALTLVDS_RX%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: ALTLVDS_RX
-- ============================================================
-- File Name: pei_lvds_rx.vhd
-- Megafunction Name(s):
-- ALTLVDS_RX
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 20.1.1 Build 720 11/11/2020 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.all;
ENTITY pei_lvds_rx IS
PORT
(
pll_areset : IN STD_LOGIC ;
rx_in : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
rx_inclock : IN STD_LOGIC ;
rx_locked : OUT STD_LOGIC ;
rx_out : OUT STD_LOGIC_VECTOR (27 DOWNTO 0);
rx_outclock : OUT STD_LOGIC
);
END pei_lvds_rx;
ARCHITECTURE SYN OF pei_lvds_rx IS
SIGNAL sub_wire0 : STD_LOGIC ;
SIGNAL sub_wire1 : STD_LOGIC_VECTOR (27 DOWNTO 0);
SIGNAL sub_wire2 : STD_LOGIC ;
COMPONENT altlvds_rx
GENERIC (
buffer_implementation : STRING;
cds_mode : STRING;
common_rx_tx_pll : STRING;
data_align_rollover : NATURAL;
data_rate : STRING;
deserialization_factor : NATURAL;
dpa_initial_phase_value : NATURAL;
dpll_lock_count : NATURAL;
dpll_lock_window : NATURAL;
enable_clock_pin_mode : STRING;
enable_dpa_align_to_rising_edge_only : STRING;
enable_dpa_calibration : STRING;
enable_dpa_fifo : STRING;
enable_dpa_initial_phase_selection : STRING;
enable_dpa_mode : STRING;
enable_dpa_pll_calibration : STRING;
enable_soft_cdr_mode : STRING;
implement_in_les : STRING;
inclock_boost : NATURAL;
inclock_data_alignment : STRING;
inclock_period : NATURAL;
inclock_phase_shift : NATURAL;
input_data_rate : NATURAL;
intended_device_family : STRING;
lose_lock_on_one_change : STRING;
lpm_hint : STRING;
lpm_type : STRING;
--lvds_rx_reg_setting : STRING;
number_of_channels : NATURAL;
outclock_resource : STRING;
pll_operation_mode : STRING;
pll_self_reset_on_loss_lock : STRING;
port_rx_channel_data_align : STRING;
port_rx_data_align : STRING;
refclk_frequency : STRING;
registered_data_align_input : STRING;
registered_output : STRING;
reset_fifo_at_first_lock : STRING;
rx_align_data_reg : STRING;
sim_dpa_is_negative_ppm_drift : STRING;
sim_dpa_net_ppm_variation : NATURAL;
sim_dpa_output_clock_phase_shift : NATURAL;
use_coreclock_input : STRING;
use_dpll_rawperror : STRING;
use_external_pll : STRING;
use_no_phase_shift : STRING;
x_on_bitslip : STRING;
clk_src_is_pll : STRING
);
PORT (
pll_areset : IN STD_LOGIC ;
rx_in : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
rx_inclock : IN STD_LOGIC ;
rx_locked : OUT STD_LOGIC ;
rx_out : OUT STD_LOGIC_VECTOR (27 DOWNTO 0);
rx_outclock : OUT STD_LOGIC
);
END COMPONENT;
BEGIN
rx_locked <= sub_wire0;
rx_out <= sub_wire1(27 DOWNTO 0);
rx_outclock <= sub_wire2;
ALTLVDS_RX_component : ALTLVDS_RX
GENERIC MAP (
buffer_implementation => "RAM",
cds_mode => "UNUSED",
common_rx_tx_pll => "OFF",
data_align_rollover => 4,
data_rate => "160.0 Mbps",
deserialization_factor => 7,
dpa_initial_phase_value => 0,
dpll_lock_count => 0,
dpll_lock_window => 0,
enable_clock_pin_mode => "UNUSED",
enable_dpa_align_to_rising_edge_only => "OFF",
enable_dpa_calibration => "ON",
enable_dpa_fifo => "UNUSED",
enable_dpa_initial_phase_selection => "OFF",
enable_dpa_mode => "OFF",
enable_dpa_pll_calibration => "OFF",
enable_soft_cdr_mode => "OFF",
implement_in_les => "ON",
inclock_boost => 0,
inclock_data_alignment => "EDGE_ALIGNED",
inclock_period => 43745,
inclock_phase_shift => 0,
input_data_rate => 160,
intended_device_family => "Cyclone 10 LP",
lose_lock_on_one_change => "UNUSED",
lpm_hint => "CBX_MODULE_PREFIX=pei_lvds_rx",
lpm_type => "altlvds_rx",
--lvds_rx_reg_setting => "ON",
number_of_channels => 4,
outclock_resource => "AUTO",
pll_operation_mode => "UNUSED",
pll_self_reset_on_loss_lock => "OFF",
port_rx_channel_data_align => "PORT_UNUSED",
port_rx_data_align => "PORT_UNUSED",
refclk_frequency => "UNUSED",
registered_data_align_input => "UNUSED",
registered_output => "ON",
reset_fifo_at_first_lock => "UNUSED",
rx_align_data_reg => "UNUSED",
sim_dpa_is_negative_ppm_drift => "OFF",
sim_dpa_net_ppm_variation => 0,
sim_dpa_output_clock_phase_shift => 0,
use_coreclock_input => "OFF",
use_dpll_rawperror => "OFF",
use_external_pll => "OFF",
use_no_phase_shift => "ON",
x_on_bitslip => "ON",
clk_src_is_pll => "off"
)
PORT MAP (
pll_areset => pll_areset,
rx_in => rx_in,
rx_inclock => rx_inclock,
rx_locked => sub_wire0,
rx_out => sub_wire1,
rx_outclock => sub_wire2
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: PRIVATE: Bitslip NUMERIC "0"
-- Retrieval info: PRIVATE: Clock_Choices STRING "tx_coreclock"
-- Retrieval info: PRIVATE: Clock_Mode NUMERIC "0"
-- Retrieval info: PRIVATE: Data_rate STRING "160.0"
-- Retrieval info: PRIVATE: Deser_Factor NUMERIC "7"
-- Retrieval info: PRIVATE: Dpll_Lock_Count NUMERIC "0"
-- Retrieval info: PRIVATE: Dpll_Lock_Window NUMERIC "0"
-- Retrieval info: PRIVATE: Enable_DPA_Mode STRING "OFF"
-- Retrieval info: PRIVATE: Enable_FIFO_DPA_Channels NUMERIC "0"
-- Retrieval info: PRIVATE: Ext_PLL STRING "OFF"
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: PRIVATE: Le_Serdes STRING "ON"
-- Retrieval info: PRIVATE: Num_Channel NUMERIC "4"
-- Retrieval info: PRIVATE: Outclock_Divide_By NUMERIC "0"
-- Retrieval info: PRIVATE: pCNX_OUTCLK_ALIGN NUMERIC "0"
-- Retrieval info: PRIVATE: pINCLOCK_PHASE_SHIFT STRING "0.00"
-- Retrieval info: PRIVATE: PLL_Enable NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_Freq STRING "22.86"
-- Retrieval info: PRIVATE: PLL_Period STRING "43.745"
-- Retrieval info: PRIVATE: pOUTCLOCK_PHASE_SHIFT NUMERIC "0"
-- Retrieval info: PRIVATE: Reg_InOut NUMERIC "1"
-- Retrieval info: PRIVATE: Use_Cda_Reset NUMERIC "0"
-- Retrieval info: PRIVATE: Use_Clock_Resc STRING "AUTO"
-- Retrieval info: PRIVATE: Use_Common_Rx_Tx_Plls NUMERIC "0"
-- Retrieval info: PRIVATE: Use_Data_Align NUMERIC "0"
-- Retrieval info: PRIVATE: Use_Lock NUMERIC "1"
-- Retrieval info: PRIVATE: Use_Pll_Areset NUMERIC "1"
-- Retrieval info: PRIVATE: Use_Rawperror NUMERIC "0"
-- Retrieval info: PRIVATE: Use_Tx_Out_Phase NUMERIC "0"
-- Retrieval info: CONSTANT: BUFFER_IMPLEMENTATION STRING "RAM"
-- Retrieval info: CONSTANT: CDS_MODE STRING "UNUSED"
-- Retrieval info: CONSTANT: COMMON_RX_TX_PLL STRING "OFF"
-- Retrieval info: CONSTANT: clk_src_is_pll STRING "off"
-- Retrieval info: CONSTANT: DATA_ALIGN_ROLLOVER NUMERIC "4"
-- Retrieval info: CONSTANT: DATA_RATE STRING "160.0 Mbps"
-- Retrieval info: CONSTANT: DESERIALIZATION_FACTOR NUMERIC "7"
-- Retrieval info: CONSTANT: DPA_INITIAL_PHASE_VALUE NUMERIC "0"
-- Retrieval info: CONSTANT: DPLL_LOCK_COUNT NUMERIC "0"
-- Retrieval info: CONSTANT: DPLL_LOCK_WINDOW NUMERIC "0"
-- Retrieval info: CONSTANT: ENABLE_CLOCK_PIN_MODE STRING "UNUSED"
-- Retrieval info: CONSTANT: ENABLE_DPA_ALIGN_TO_RISING_EDGE_ONLY STRING "OFF"
-- Retrieval info: CONSTANT: ENABLE_DPA_CALIBRATION STRING "ON"
-- Retrieval info: CONSTANT: ENABLE_DPA_FIFO STRING "UNUSED"
-- Retrieval info: CONSTANT: ENABLE_DPA_INITIAL_PHASE_SELECTION STRING "OFF"
-- Retrieval info: CONSTANT: ENABLE_DPA_MODE STRING "OFF"
-- Retrieval info: CONSTANT: ENABLE_DPA_PLL_CALIBRATION STRING "OFF"
-- Retrieval info: CONSTANT: ENABLE_SOFT_CDR_MODE STRING "OFF"
-- Retrieval info: CONSTANT: IMPLEMENT_IN_LES STRING "ON"
-- Retrieval info: CONSTANT: INCLOCK_BOOST NUMERIC "0"
-- Retrieval info: CONSTANT: INCLOCK_DATA_ALIGNMENT STRING "EDGE_ALIGNED"
-- Retrieval info: CONSTANT: INCLOCK_PERIOD NUMERIC "43745"
-- Retrieval info: CONSTANT: INCLOCK_PHASE_SHIFT NUMERIC "0"
-- Retrieval info: CONSTANT: INPUT_DATA_RATE NUMERIC "160"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: LOSE_LOCK_ON_ONE_CHANGE STRING "UNUSED"
-- Retrieval info: CONSTANT: LPM_HINT STRING "UNUSED"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altlvds_rx"
-- Retrieval info: CONSTANT: LVDS_RX_REG_SETTING STRING "ON"
-- Retrieval info: CONSTANT: NUMBER_OF_CHANNELS NUMERIC "4"
-- Retrieval info: CONSTANT: OUTCLOCK_RESOURCE STRING "AUTO"
-- Retrieval info: CONSTANT: PLL_OPERATION_MODE STRING "UNUSED"
-- Retrieval info: CONSTANT: PLL_SELF_RESET_ON_LOSS_LOCK STRING "OFF"
-- Retrieval info: CONSTANT: PORT_RX_CHANNEL_DATA_ALIGN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_RX_DATA_ALIGN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: REFCLK_FREQUENCY STRING "UNUSED"
-- Retrieval info: CONSTANT: REGISTERED_DATA_ALIGN_INPUT STRING "UNUSED"
-- Retrieval info: CONSTANT: REGISTERED_OUTPUT STRING "ON"
-- Retrieval info: CONSTANT: RESET_FIFO_AT_FIRST_LOCK STRING "UNUSED"
-- Retrieval info: CONSTANT: RX_ALIGN_DATA_REG STRING "UNUSED"
-- Retrieval info: CONSTANT: SIM_DPA_IS_NEGATIVE_PPM_DRIFT STRING "OFF"
-- Retrieval info: CONSTANT: SIM_DPA_NET_PPM_VARIATION NUMERIC "0"
-- Retrieval info: CONSTANT: SIM_DPA_OUTPUT_CLOCK_PHASE_SHIFT NUMERIC "0"
-- Retrieval info: CONSTANT: USE_CORECLOCK_INPUT STRING "OFF"
-- Retrieval info: CONSTANT: USE_DPLL_RAWPERROR STRING "OFF"
-- Retrieval info: CONSTANT: USE_EXTERNAL_PLL STRING "OFF"
-- Retrieval info: CONSTANT: USE_NO_PHASE_SHIFT STRING "ON"
-- Retrieval info: CONSTANT: X_ON_BITSLIP STRING "ON"
-- Retrieval info: USED_PORT: pll_areset 0 0 0 0 INPUT NODEFVAL "pll_areset"
-- Retrieval info: CONNECT: @pll_areset 0 0 0 0 pll_areset 0 0 0 0
-- Retrieval info: USED_PORT: rx_in 0 0 4 0 INPUT NODEFVAL "rx_in[3..0]"
-- Retrieval info: CONNECT: @rx_in 0 0 4 0 rx_in 0 0 4 0
-- Retrieval info: USED_PORT: rx_inclock 0 0 0 0 INPUT NODEFVAL "rx_inclock"
-- Retrieval info: CONNECT: @rx_inclock 0 0 0 0 rx_inclock 0 0 0 0
-- Retrieval info: USED_PORT: rx_locked 0 0 0 0 OUTPUT NODEFVAL "rx_locked"
-- Retrieval info: CONNECT: rx_locked 0 0 0 0 @rx_locked 0 0 0 0
-- Retrieval info: USED_PORT: rx_out 0 0 28 0 OUTPUT NODEFVAL "rx_out[27..0]"
-- Retrieval info: CONNECT: rx_out 0 0 28 0 @rx_out 0 0 28 0
-- Retrieval info: USED_PORT: rx_outclock 0 0 0 0 OUTPUT NODEFVAL "rx_outclock"
-- Retrieval info: CONNECT: rx_outclock 0 0 0 0 @rx_outclock 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_lvds_rx.vhd TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_lvds_rx.qip TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_lvds_rx.bsf FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_lvds_rx_inst.vhd TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_lvds_rx.inc FALSE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_lvds_rx.cmp TRUE TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pei_lvds_rx.ppf TRUE FALSE
-- Retrieval info: LIB_FILE: altera_mf
-- Retrieval info: CBX_MODULE_PREFIX: ON

View file

@ -0,0 +1,8 @@
pei_lvds_rx_inst : pei_lvds_rx PORT MAP (
pll_areset => pll_areset_sig,
rx_in => rx_in_sig,
rx_inclock => rx_inclock_sig,
rx_locked => rx_locked_sig,
rx_out => rx_out_sig,
rx_outclock => rx_outclock_sig
);

View file

@ -0,0 +1,24 @@
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
component pll_25in_100out_pei
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
end component;

View file

@ -0,0 +1,10 @@
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE pinplan>
<pinplan intended_family="Cyclone 10 LP" variation_name="pll_25in_100out_pei" megafunction_name="ALTPLL" specifies="all_ports">
<global>
<pin name="inclk0" direction="input" scope="external" source="clock" />
<pin name="c0" direction="output" scope="external" source="clock" />
<pin name="locked" direction="output" scope="external" />
</global>
</pinplan>

View file

@ -0,0 +1,6 @@
set_global_assignment -name IP_TOOL_NAME "ALTPLL"
set_global_assignment -name IP_TOOL_VERSION "20.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "pll_25in_100out_pei.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_25in_100out_pei.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_25in_100out_pei.ppf"]

View file

@ -0,0 +1,360 @@
-- megafunction wizard: %ALTPLL%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: altpll
-- ============================================================
-- File Name: pll_25in_100out_pei.vhd
-- Megafunction Name(s):
-- altpll
--
-- Simulation Library Files(s):
--
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 20.1.1 Build 720 11/11/2020 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.all;
ENTITY pll_25in_100out_pei IS
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
END pll_25in_100out_pei;
ARCHITECTURE SYN OF pll_25in_100out_pei IS
SIGNAL sub_wire0 : STD_LOGIC ;
SIGNAL sub_wire1 : STD_LOGIC_VECTOR (1 DOWNTO 0);
SIGNAL sub_wire2_bv : BIT_VECTOR (0 DOWNTO 0);
SIGNAL sub_wire2 : STD_LOGIC_VECTOR (0 DOWNTO 0);
SIGNAL sub_wire3 : STD_LOGIC_VECTOR (4 DOWNTO 0);
SIGNAL sub_wire4 : STD_LOGIC ;
SIGNAL sub_wire5 : STD_LOGIC ;
COMPONENT altpll
GENERIC (
bandwidth_type : STRING;
clk0_divide_by : NATURAL;
clk0_duty_cycle : NATURAL;
clk0_multiply_by : NATURAL;
clk0_phase_shift : STRING;
compensate_clock : STRING;
inclk0_input_frequency : NATURAL;
intended_device_family : STRING;
lpm_hint : STRING;
lpm_type : STRING;
operation_mode : STRING;
pll_type : STRING;
port_activeclock : STRING;
port_areset : STRING;
port_clkbad0 : STRING;
port_clkbad1 : STRING;
port_clkloss : STRING;
port_clkswitch : STRING;
port_configupdate : STRING;
port_fbin : STRING;
port_inclk0 : STRING;
port_inclk1 : STRING;
port_locked : STRING;
port_pfdena : STRING;
port_phasecounterselect : STRING;
port_phasedone : STRING;
port_phasestep : STRING;
port_phaseupdown : STRING;
port_pllena : STRING;
port_scanaclr : STRING;
port_scanclk : STRING;
port_scanclkena : STRING;
port_scandata : STRING;
port_scandataout : STRING;
port_scandone : STRING;
port_scanread : STRING;
port_scanwrite : STRING;
port_clk0 : STRING;
port_clk1 : STRING;
port_clk2 : STRING;
port_clk3 : STRING;
port_clk4 : STRING;
port_clk5 : STRING;
port_clkena0 : STRING;
port_clkena1 : STRING;
port_clkena2 : STRING;
port_clkena3 : STRING;
port_clkena4 : STRING;
port_clkena5 : STRING;
port_extclk0 : STRING;
port_extclk1 : STRING;
port_extclk2 : STRING;
port_extclk3 : STRING;
self_reset_on_loss_lock : STRING;
width_clock : NATURAL
);
PORT (
inclk : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
clk : OUT STD_LOGIC_VECTOR (4 DOWNTO 0);
locked : OUT STD_LOGIC
);
END COMPONENT;
BEGIN
sub_wire2_bv(0 DOWNTO 0) <= "0";
sub_wire2 <= To_stdlogicvector(sub_wire2_bv);
sub_wire0 <= inclk0;
sub_wire1 <= sub_wire2(0 DOWNTO 0) & sub_wire0;
sub_wire4 <= sub_wire3(0);
c0 <= sub_wire4;
locked <= sub_wire5;
altpll_component : altpll
GENERIC MAP (
bandwidth_type => "AUTO",
clk0_divide_by => 1,
clk0_duty_cycle => 50,
clk0_multiply_by => 4,
clk0_phase_shift => "0",
compensate_clock => "CLK0",
inclk0_input_frequency => 40000,
intended_device_family => "Cyclone 10 LP",
lpm_hint => "CBX_MODULE_PREFIX=pll_25in_100out_pei",
lpm_type => "altpll",
operation_mode => "NORMAL",
pll_type => "AUTO",
port_activeclock => "PORT_UNUSED",
port_areset => "PORT_UNUSED",
port_clkbad0 => "PORT_UNUSED",
port_clkbad1 => "PORT_UNUSED",
port_clkloss => "PORT_UNUSED",
port_clkswitch => "PORT_UNUSED",
port_configupdate => "PORT_UNUSED",
port_fbin => "PORT_UNUSED",
port_inclk0 => "PORT_USED",
port_inclk1 => "PORT_UNUSED",
port_locked => "PORT_USED",
port_pfdena => "PORT_UNUSED",
port_phasecounterselect => "PORT_UNUSED",
port_phasedone => "PORT_UNUSED",
port_phasestep => "PORT_UNUSED",
port_phaseupdown => "PORT_UNUSED",
port_pllena => "PORT_UNUSED",
port_scanaclr => "PORT_UNUSED",
port_scanclk => "PORT_UNUSED",
port_scanclkena => "PORT_UNUSED",
port_scandata => "PORT_UNUSED",
port_scandataout => "PORT_UNUSED",
port_scandone => "PORT_UNUSED",
port_scanread => "PORT_UNUSED",
port_scanwrite => "PORT_UNUSED",
port_clk0 => "PORT_USED",
port_clk1 => "PORT_UNUSED",
port_clk2 => "PORT_UNUSED",
port_clk3 => "PORT_UNUSED",
port_clk4 => "PORT_UNUSED",
port_clk5 => "PORT_UNUSED",
port_clkena0 => "PORT_UNUSED",
port_clkena1 => "PORT_UNUSED",
port_clkena2 => "PORT_UNUSED",
port_clkena3 => "PORT_UNUSED",
port_clkena4 => "PORT_UNUSED",
port_clkena5 => "PORT_UNUSED",
port_extclk0 => "PORT_UNUSED",
port_extclk1 => "PORT_UNUSED",
port_extclk2 => "PORT_UNUSED",
port_extclk3 => "PORT_UNUSED",
self_reset_on_loss_lock => "OFF",
width_clock => 5
)
PORT MAP (
inclk => sub_wire1,
clk => sub_wire3,
locked => sub_wire5
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "8"
-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "100.000000"
-- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "25.000"
-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"
-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "1"
-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "1"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
-- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_25in_100out.mif"
-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"
-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"
-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
-- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"
-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "AUTO"
-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1"
-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "4"
-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "40000"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
-- Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
-- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "OFF"
-- Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"
-- Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"
-- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]"
-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
-- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
-- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_25in_100out_pei.vhd TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_25in_100out_pei.ppf TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_25in_100out_pei.inc FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_25in_100out_pei.cmp TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_25in_100out_pei.bsf FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_25in_100out_pei_inst.vhd FALSE
-- Retrieval info: CBX_MODULE_PREFIX: ON

View file

@ -0,0 +1,28 @@
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
component pll_head_clk
PORT
(
areset : IN STD_LOGIC := '0';
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
c1 : OUT STD_LOGIC ;
c2 : OUT STD_LOGIC ;
c3 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
end component;

View file

@ -0,0 +1,14 @@
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE pinplan>
<pinplan intended_family="Cyclone 10 LP" variation_name="pll_head_clk" megafunction_name="ALTPLL" specifies="all_ports">
<global>
<pin name="areset" direction="input" scope="external" />
<pin name="inclk0" direction="input" scope="external" source="clock" />
<pin name="c0" direction="output" scope="external" source="clock" />
<pin name="c1" direction="output" scope="external" source="clock" />
<pin name="c2" direction="output" scope="external" source="clock" />
<pin name="c3" direction="output" scope="external" source="clock" />
<pin name="locked" direction="output" scope="external" />
</global>
</pinplan>

View file

@ -0,0 +1,7 @@
set_global_assignment -name IP_TOOL_NAME "ALTPLL"
set_global_assignment -name IP_TOOL_VERSION "20.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "pll_head_clk.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_head_clk_inst.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_head_clk.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_head_clk.ppf"]

View file

@ -0,0 +1,462 @@
-- megafunction wizard: %ALTPLL%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: altpll
-- ============================================================
-- File Name: pll_head_clk.vhd
-- Megafunction Name(s):
-- altpll
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 20.1.1 Build 720 11/11/2020 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2020 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.all;
ENTITY pll_head_clk IS
PORT
(
areset : IN STD_LOGIC := '0';
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
c1 : OUT STD_LOGIC ;
c2 : OUT STD_LOGIC ;
c3 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
END pll_head_clk;
ARCHITECTURE SYN OF pll_head_clk IS
SIGNAL sub_wire0 : STD_LOGIC ;
SIGNAL sub_wire1 : STD_LOGIC_VECTOR (1 DOWNTO 0);
SIGNAL sub_wire2_bv : BIT_VECTOR (0 DOWNTO 0);
SIGNAL sub_wire2 : STD_LOGIC_VECTOR (0 DOWNTO 0);
SIGNAL sub_wire3 : STD_LOGIC_VECTOR (4 DOWNTO 0);
SIGNAL sub_wire4 : STD_LOGIC ;
SIGNAL sub_wire5 : STD_LOGIC ;
SIGNAL sub_wire6 : STD_LOGIC ;
SIGNAL sub_wire7 : STD_LOGIC ;
SIGNAL sub_wire8 : STD_LOGIC ;
COMPONENT altpll
GENERIC (
bandwidth_type : STRING;
clk0_divide_by : NATURAL;
clk0_duty_cycle : NATURAL;
clk0_multiply_by : NATURAL;
clk0_phase_shift : STRING;
clk1_divide_by : NATURAL;
clk1_duty_cycle : NATURAL;
clk1_multiply_by : NATURAL;
clk1_phase_shift : STRING;
clk2_divide_by : NATURAL;
clk2_duty_cycle : NATURAL;
clk2_multiply_by : NATURAL;
clk2_phase_shift : STRING;
clk3_divide_by : NATURAL;
clk3_duty_cycle : NATURAL;
clk3_multiply_by : NATURAL;
clk3_phase_shift : STRING;
compensate_clock : STRING;
inclk0_input_frequency : NATURAL;
intended_device_family : STRING;
lpm_hint : STRING;
lpm_type : STRING;
operation_mode : STRING;
pll_type : STRING;
port_activeclock : STRING;
port_areset : STRING;
port_clkbad0 : STRING;
port_clkbad1 : STRING;
port_clkloss : STRING;
port_clkswitch : STRING;
port_configupdate : STRING;
port_fbin : STRING;
port_inclk0 : STRING;
port_inclk1 : STRING;
port_locked : STRING;
port_pfdena : STRING;
port_phasecounterselect : STRING;
port_phasedone : STRING;
port_phasestep : STRING;
port_phaseupdown : STRING;
port_pllena : STRING;
port_scanaclr : STRING;
port_scanclk : STRING;
port_scanclkena : STRING;
port_scandata : STRING;
port_scandataout : STRING;
port_scandone : STRING;
port_scanread : STRING;
port_scanwrite : STRING;
port_clk0 : STRING;
port_clk1 : STRING;
port_clk2 : STRING;
port_clk3 : STRING;
port_clk4 : STRING;
port_clk5 : STRING;
port_clkena0 : STRING;
port_clkena1 : STRING;
port_clkena2 : STRING;
port_clkena3 : STRING;
port_clkena4 : STRING;
port_clkena5 : STRING;
port_extclk0 : STRING;
port_extclk1 : STRING;
port_extclk2 : STRING;
port_extclk3 : STRING;
self_reset_on_loss_lock : STRING;
width_clock : NATURAL
);
PORT (
areset : IN STD_LOGIC ;
inclk : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
clk : OUT STD_LOGIC_VECTOR (4 DOWNTO 0);
locked : OUT STD_LOGIC
);
END COMPONENT;
BEGIN
sub_wire2_bv(0 DOWNTO 0) <= "0";
sub_wire2 <= To_stdlogicvector(sub_wire2_bv);
sub_wire0 <= inclk0;
sub_wire1 <= sub_wire2(0 DOWNTO 0) & sub_wire0;
sub_wire7 <= sub_wire3(3);
sub_wire6 <= sub_wire3(2);
sub_wire5 <= sub_wire3(1);
sub_wire4 <= sub_wire3(0);
c0 <= sub_wire4;
c1 <= sub_wire5;
c2 <= sub_wire6;
c3 <= sub_wire7;
locked <= sub_wire8;
altpll_component : altpll
GENERIC MAP (
bandwidth_type => "AUTO",
clk0_divide_by => 2,
clk0_duty_cycle => 50,
clk0_multiply_by => 7,
clk0_phase_shift => "0",
clk1_divide_by => 2,
clk1_duty_cycle => 50,
clk1_multiply_by => 1,
clk1_phase_shift => "11999",
clk2_divide_by => 2,
clk2_duty_cycle => 50,
clk2_multiply_by => 7,
clk2_phase_shift => "429",
clk3_divide_by => 1,
clk3_duty_cycle => 50,
clk3_multiply_by => 1,
clk3_phase_shift => "0",
compensate_clock => "CLK0",
inclk0_input_frequency => 21000,
intended_device_family => "Cyclone 10 LP",
lpm_hint => "CBX_MODULE_PREFIX=pll_head_clk",
lpm_type => "altpll",
operation_mode => "NORMAL",
pll_type => "AUTO",
port_activeclock => "PORT_UNUSED",
port_areset => "PORT_USED",
port_clkbad0 => "PORT_UNUSED",
port_clkbad1 => "PORT_UNUSED",
port_clkloss => "PORT_UNUSED",
port_clkswitch => "PORT_UNUSED",
port_configupdate => "PORT_UNUSED",
port_fbin => "PORT_UNUSED",
port_inclk0 => "PORT_USED",
port_inclk1 => "PORT_UNUSED",
port_locked => "PORT_USED",
port_pfdena => "PORT_UNUSED",
port_phasecounterselect => "PORT_UNUSED",
port_phasedone => "PORT_UNUSED",
port_phasestep => "PORT_UNUSED",
port_phaseupdown => "PORT_UNUSED",
port_pllena => "PORT_UNUSED",
port_scanaclr => "PORT_UNUSED",
port_scanclk => "PORT_UNUSED",
port_scanclkena => "PORT_UNUSED",
port_scandata => "PORT_UNUSED",
port_scandataout => "PORT_UNUSED",
port_scandone => "PORT_UNUSED",
port_scanread => "PORT_UNUSED",
port_scanwrite => "PORT_UNUSED",
port_clk0 => "PORT_USED",
port_clk1 => "PORT_USED",
port_clk2 => "PORT_USED",
port_clk3 => "PORT_USED",
port_clk4 => "PORT_UNUSED",
port_clk5 => "PORT_UNUSED",
port_clkena0 => "PORT_UNUSED",
port_clkena1 => "PORT_UNUSED",
port_clkena2 => "PORT_UNUSED",
port_clkena3 => "PORT_UNUSED",
port_clkena4 => "PORT_UNUSED",
port_clkena5 => "PORT_UNUSED",
port_extclk0 => "PORT_UNUSED",
port_extclk1 => "PORT_UNUSED",
port_extclk2 => "PORT_UNUSED",
port_extclk3 => "PORT_UNUSED",
self_reset_on_loss_lock => "OFF",
width_clock => 5
)
PORT MAP (
areset => areset,
inclk => sub_wire1,
clk => sub_wire3,
locked => sub_wire8
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "Any"
-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "2"
-- Retrieval info: PRIVATE: DIV_FACTOR1 NUMERIC "2"
-- Retrieval info: PRIVATE: DIV_FACTOR2 NUMERIC "2"
-- Retrieval info: PRIVATE: DIV_FACTOR3 NUMERIC "1"
-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
-- Retrieval info: PRIVATE: DUTY_CYCLE1 STRING "50.00000000"
-- Retrieval info: PRIVATE: DUTY_CYCLE2 STRING "50.00000000"
-- Retrieval info: PRIVATE: DUTY_CYCLE3 STRING "50.00000000"
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "166.666504"
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE1 STRING "23.809500"
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE2 STRING "166.666504"
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE3 STRING "47.618999"
-- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "47.619"
-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"
-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT1 STRING "deg"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT2 STRING "ps"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT3 STRING "ps"
-- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
-- Retrieval info: PRIVATE: MIRROR_CLK1 STRING "0"
-- Retrieval info: PRIVATE: MIRROR_CLK2 STRING "0"
-- Retrieval info: PRIVATE: MIRROR_CLK3 STRING "0"
-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "7"
-- Retrieval info: PRIVATE: MULT_FACTOR1 NUMERIC "1"
-- Retrieval info: PRIVATE: MULT_FACTOR2 NUMERIC "7"
-- Retrieval info: PRIVATE: MULT_FACTOR3 NUMERIC "1"
-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000"
-- Retrieval info: PRIVATE: OUTPUT_FREQ1 STRING "100.00000000"
-- Retrieval info: PRIVATE: OUTPUT_FREQ2 STRING "100.00000000"
-- Retrieval info: PRIVATE: OUTPUT_FREQ3 STRING "100.00000000"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE1 STRING "0"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE2 STRING "0"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE3 STRING "0"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT1 STRING "MHz"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT2 STRING "MHz"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT3 STRING "MHz"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT1 STRING "102.85000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT2 STRING "25.71000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT3 STRING "0.00000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT1 STRING "deg"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT2 STRING "deg"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT3 STRING "ps"
-- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1"
-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
-- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_head_clk.mif"
-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"
-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
-- Retrieval info: PRIVATE: STICKY_CLK1 STRING "1"
-- Retrieval info: PRIVATE: STICKY_CLK2 STRING "1"
-- Retrieval info: PRIVATE: STICKY_CLK3 STRING "1"
-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"
-- Retrieval info: PRIVATE: USE_CLK1 STRING "1"
-- Retrieval info: PRIVATE: USE_CLK2 STRING "1"
-- Retrieval info: PRIVATE: USE_CLK3 STRING "1"
-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
-- Retrieval info: PRIVATE: USE_CLKENA1 STRING "0"
-- Retrieval info: PRIVATE: USE_CLKENA2 STRING "0"
-- Retrieval info: PRIVATE: USE_CLKENA3 STRING "0"
-- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"
-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "AUTO"
-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "2"
-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "7"
-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
-- Retrieval info: CONSTANT: CLK1_DIVIDE_BY NUMERIC "2"
-- Retrieval info: CONSTANT: CLK1_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: CLK1_MULTIPLY_BY NUMERIC "1"
-- Retrieval info: CONSTANT: CLK1_PHASE_SHIFT STRING "11999"
-- Retrieval info: CONSTANT: CLK2_DIVIDE_BY NUMERIC "2"
-- Retrieval info: CONSTANT: CLK2_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: CLK2_MULTIPLY_BY NUMERIC "7"
-- Retrieval info: CONSTANT: CLK2_PHASE_SHIFT STRING "429"
-- Retrieval info: CONSTANT: CLK3_DIVIDE_BY NUMERIC "1"
-- Retrieval info: CONSTANT: CLK3_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: CLK3_MULTIPLY_BY NUMERIC "1"
-- Retrieval info: CONSTANT: CLK3_PHASE_SHIFT STRING "0"
-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "21000"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
-- Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
-- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "OFF"
-- Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"
-- Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"
-- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]"
-- Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"
-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
-- Retrieval info: USED_PORT: c1 0 0 0 0 OUTPUT_CLK_EXT VCC "c1"
-- Retrieval info: USED_PORT: c2 0 0 0 0 OUTPUT_CLK_EXT VCC "c2"
-- Retrieval info: USED_PORT: c3 0 0 0 0 OUTPUT_CLK_EXT VCC "c3"
-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
-- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
-- Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0
-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
-- Retrieval info: CONNECT: c1 0 0 0 0 @clk 0 0 1 1
-- Retrieval info: CONNECT: c2 0 0 0 0 @clk 0 0 1 2
-- Retrieval info: CONNECT: c3 0 0 0 0 @clk 0 0 1 3
-- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_head_clk.vhd TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_head_clk.ppf TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_head_clk.inc FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_head_clk.cmp TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_head_clk.bsf FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_head_clk_inst.vhd TRUE
-- Retrieval info: LIB_FILE: altera_mf
-- Retrieval info: CBX_MODULE_PREFIX: ON

View file

@ -0,0 +1,6 @@
set_global_assignment -name IP_TOOL_NAME "ALTPLL"
set_global_assignment -name IP_TOOL_VERSION "19.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone 10 LP}"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "pll_phe_if.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_phe_if.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_phe_if.ppf"]

View file

@ -0,0 +1,361 @@
-- megafunction wizard: %ALTPLL%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: altpll
-- ============================================================
-- File Name: pll_phe_if.vhd
-- Megafunction Name(s):
-- altpll
--
-- Simulation Library Files(s):
-- altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 19.1.0 Build 670 09/22/2019 SJ Lite Edition
-- ************************************************************
--Copyright (C) 2019 Intel Corporation. All rights reserved.
--Your use of Intel Corporation's design tools, logic functions
--and other software and tools, and any partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Intel Program License
--Subscription Agreement, the Intel Quartus Prime License Agreement,
--the Intel FPGA IP License Agreement, or other applicable license
--agreement, including, without limitation, that your use is for
--the sole purpose of programming logic devices manufactured by
--Intel and sold by Intel or its authorized distributors. Please
--refer to the applicable agreement for further details, at
--https://fpgasoftware.intel.com/eula.
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera_mf;
USE altera_mf.all;
ENTITY pll_phe_if IS
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
END pll_phe_if;
ARCHITECTURE SYN OF pll_phe_if IS
SIGNAL sub_wire0 : STD_LOGIC ;
SIGNAL sub_wire1 : STD_LOGIC_VECTOR (1 DOWNTO 0);
SIGNAL sub_wire2_bv : BIT_VECTOR (0 DOWNTO 0);
SIGNAL sub_wire2 : STD_LOGIC_VECTOR (0 DOWNTO 0);
SIGNAL sub_wire3 : STD_LOGIC_VECTOR (4 DOWNTO 0);
SIGNAL sub_wire4 : STD_LOGIC ;
SIGNAL sub_wire5 : STD_LOGIC ;
COMPONENT altpll
GENERIC (
bandwidth_type : STRING;
clk0_divide_by : NATURAL;
clk0_duty_cycle : NATURAL;
clk0_multiply_by : NATURAL;
clk0_phase_shift : STRING;
compensate_clock : STRING;
inclk0_input_frequency : NATURAL;
intended_device_family : STRING;
lpm_hint : STRING;
lpm_type : STRING;
operation_mode : STRING;
pll_type : STRING;
port_activeclock : STRING;
port_areset : STRING;
port_clkbad0 : STRING;
port_clkbad1 : STRING;
port_clkloss : STRING;
port_clkswitch : STRING;
port_configupdate : STRING;
port_fbin : STRING;
port_inclk0 : STRING;
port_inclk1 : STRING;
port_locked : STRING;
port_pfdena : STRING;
port_phasecounterselect : STRING;
port_phasedone : STRING;
port_phasestep : STRING;
port_phaseupdown : STRING;
port_pllena : STRING;
port_scanaclr : STRING;
port_scanclk : STRING;
port_scanclkena : STRING;
port_scandata : STRING;
port_scandataout : STRING;
port_scandone : STRING;
port_scanread : STRING;
port_scanwrite : STRING;
port_clk0 : STRING;
port_clk1 : STRING;
port_clk2 : STRING;
port_clk3 : STRING;
port_clk4 : STRING;
port_clk5 : STRING;
port_clkena0 : STRING;
port_clkena1 : STRING;
port_clkena2 : STRING;
port_clkena3 : STRING;
port_clkena4 : STRING;
port_clkena5 : STRING;
port_extclk0 : STRING;
port_extclk1 : STRING;
port_extclk2 : STRING;
port_extclk3 : STRING;
self_reset_on_loss_lock : STRING;
width_clock : NATURAL
);
PORT (
inclk : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
clk : OUT STD_LOGIC_VECTOR (4 DOWNTO 0);
locked : OUT STD_LOGIC
);
END COMPONENT;
BEGIN
sub_wire2_bv(0 DOWNTO 0) <= "0";
sub_wire2 <= To_stdlogicvector(sub_wire2_bv);
sub_wire0 <= inclk0;
sub_wire1 <= sub_wire2(0 DOWNTO 0) & sub_wire0;
sub_wire4 <= sub_wire3(0);
c0 <= sub_wire4;
locked <= sub_wire5;
altpll_component : altpll
GENERIC MAP (
bandwidth_type => "AUTO",
clk0_divide_by => 1,
clk0_duty_cycle => 50,
clk0_multiply_by => 1,
clk0_phase_shift => "0",
compensate_clock => "CLK0",
inclk0_input_frequency => 4000,
intended_device_family => "Cyclone 10 LP",
lpm_hint => "CBX_MODULE_PREFIX=pll_phe_if",
lpm_type => "altpll",
operation_mode => "NORMAL",
pll_type => "AUTO",
port_activeclock => "PORT_UNUSED",
port_areset => "PORT_UNUSED",
port_clkbad0 => "PORT_UNUSED",
port_clkbad1 => "PORT_UNUSED",
port_clkloss => "PORT_UNUSED",
port_clkswitch => "PORT_UNUSED",
port_configupdate => "PORT_UNUSED",
port_fbin => "PORT_UNUSED",
port_inclk0 => "PORT_USED",
port_inclk1 => "PORT_UNUSED",
port_locked => "PORT_USED",
port_pfdena => "PORT_UNUSED",
port_phasecounterselect => "PORT_UNUSED",
port_phasedone => "PORT_UNUSED",
port_phasestep => "PORT_UNUSED",
port_phaseupdown => "PORT_UNUSED",
port_pllena => "PORT_UNUSED",
port_scanaclr => "PORT_UNUSED",
port_scanclk => "PORT_UNUSED",
port_scanclkena => "PORT_UNUSED",
port_scandata => "PORT_UNUSED",
port_scandataout => "PORT_UNUSED",
port_scandone => "PORT_UNUSED",
port_scanread => "PORT_UNUSED",
port_scanwrite => "PORT_UNUSED",
port_clk0 => "PORT_USED",
port_clk1 => "PORT_UNUSED",
port_clk2 => "PORT_UNUSED",
port_clk3 => "PORT_UNUSED",
port_clk4 => "PORT_UNUSED",
port_clk5 => "PORT_UNUSED",
port_clkena0 => "PORT_UNUSED",
port_clkena1 => "PORT_UNUSED",
port_clkena2 => "PORT_UNUSED",
port_clkena3 => "PORT_UNUSED",
port_clkena4 => "PORT_UNUSED",
port_clkena5 => "PORT_UNUSED",
port_extclk0 => "PORT_UNUSED",
port_extclk1 => "PORT_UNUSED",
port_extclk2 => "PORT_UNUSED",
port_extclk3 => "PORT_UNUSED",
self_reset_on_loss_lock => "OFF",
width_clock => 5
)
PORT MAP (
inclk => sub_wire1,
clk => sub_wire3,
locked => sub_wire5
);
END SYN;
-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "8"
-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "250.000000"
-- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "250.000"
-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"
-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "1"
-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
-- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_phe_if.mif"
-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"
-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"
-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
-- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"
-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "AUTO"
-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1"
-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "1"
-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "4000"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone 10 LP"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
-- Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
-- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "OFF"
-- Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"
-- Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"
-- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]"
-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
-- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
-- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_phe_if.vhd TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_phe_if.ppf TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_phe_if.inc FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_phe_if.cmp TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_phe_if.bsf FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_phe_if_inst.vhd FALSE
-- Retrieval info: LIB_FILE: altera_mf
-- Retrieval info: CBX_MODULE_PREFIX: ON

View file

@ -0,0 +1 @@
set tool_name "ModelSim-Altera (VHDL)"

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

View file

@ -0,0 +1,193 @@
/* Module description
Behevaiour model of the TMP275 temperature sensor
All the registers are 16 bit apart from the config register which is 8bit
rd and wr signals are defined from the Master point of view. A rd signal means the master is reading from a FPGA register
wr_i2C_div shows write 8bit data pack from the slave
rd_i2c_div shows read 8bit data pack to the slave
*/
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pei_register_pkg.all;
--add_out has been elminated. The I2C interface decodes write and read frame
entity tmp275 is
GENERIC(
--Paramaters for the debugger
ADDRESS_TMP275 : integer range 0 to 255 :=0
);
PORT(
clk : IN STD_LOGIC;
rst_n : IN STD_LOGIC;
scl_in : in std_logic;
scl_out : out std_logic;
sda_in : in std_logic;
sda_out : out std_logic;
reg_temp : IN STD_LOGIC_VECTOR(15 downto 0);
conf_tmp275 : OUT STD_LOGIC_VECTOR(15 downto 0);
Tlow_tmp275 : OUT STD_LOGIC_VECTOR(15 downto 0);
Thigh_tmp275 : OUT STD_LOGIC_VECTOR(15 downto 0)
);
end entity tmp275;
architecture struct of tmp275 is
component i2c_slv_simple_tmp275 -- Add reset signal
generic(
DEVICE_ADDRESS : integer range 0 to 255);
port(
clk : in std_logic;
scl_in : in std_logic;
scl_out : out std_logic;
sda_in : in std_logic;
sda_out : out std_logic;
i2c_busy_out : out std_logic;
add_out : out std_logic_vector(15 downto 0);
wr_data_out : out std_logic_vector(7 downto 0);
wr_en_out : out std_logic;
rd_en_out : out std_logic;
rd_data_in : in std_logic_vector(7 downto 0);
rd_dv_in : in std_logic
);
end component;
signal i2c_busy_out : std_logic;
signal wr_i2c_div : std_logic;
signal rd_i2c_div : std_logic;
signal rd_en_out : std_logic;
signal reg_tmp275 : std_logic_vector(15 downto 0);
signal data_in : std_logic_vector(15 downto 0);
signal temp_i : std_logic_vector(15 downto 0);
signal wr_data_out : std_logic_vector(7 downto 0);
signal rd_data_in : std_logic_vector(7 downto 0);
signal bct_rd, bct_wr : std_logic_vector(7 downto 0);
signal ptr_tmp275 : std_logic_vector(7 downto 0);
signal ptr_tmp275_i : integer;
signal data_out, data_out_i : std_logic_vector(15 downto 0);
signal i2c_busy_out_d1 : std_logic;
begin
--ADD generic I2C address
i2c_slv_simple_tmp275_isnt: i2c_slv_simple_tmp275
generic map ( DEVICE_ADDRESS => ADDRESS_TMP275 )
port map(
clk => clk, scl_in => scl_in, scl_out => scl_out, sda_in => sda_in, sda_out => sda_out, i2c_busy_out => i2c_busy_out, wr_data_out => wr_data_out,
wr_en_out => wr_i2c_div, rd_en_out => rd_en_out, rd_data_in => rd_data_in, rd_dv_in => rd_i2c_div, add_out => open
);
DATA_FRAME_P : process(clk,rst_n) -- counters and shifters
begin
if (rst_n ='0') then
bct_rd <= (others => '0');
bct_wr <= (others => '0');
ptr_tmp275 <= (others => '0');
reg_tmp275 <= (others => '0');
data_out <= (others => '0');
--ptr <= (others => '0');
data_in <= (others => '0');
rd_data_in <= (others => '0');
elsif (clk'event and clk='1') then
rd_i2c_div <= rd_en_out ; -- this signal should be only valid for clock
if (i2c_busy_out ='1' and wr_i2C_div='1') then
bct_wr <= std_logic_vector(unsigned(bct_wr)+1); --Master writes
if (bct_wr = x"00") then -- First Frame is a pointer
ptr_tmp275 <= wr_data_out;
else
data_in <= data_in( 7 downto 0) & wr_data_out; --Shift to the left MSB byte first. Data MSB aligned
end if;
elsif (i2c_busy_out ='0') then
bct_wr <= (others => '0');
end if;
if (i2c_busy_out = '1' and rd_en_out = '1'and rd_i2c_div ='1') then
bct_rd <= std_logic_vector(unsigned(bct_rd)+1); -- The counter is not necessary
rd_data_in <= data_out(15 downto 8);
data_out <= data_out(7 downto 0) & X"00";
elsif (i2c_busy_out = '0') then
bct_rd <= (others => '0');
data_out <= data_out_i;
end if;
if (bct_wr = x"03") then
reg_tmp275 <= data_in;
--ptr_tmp275 <= ptr;
end if;
end if;
end process;
ptr_tmp275_i <= to_integer(unsigned(ptr_tmp275));
TMP275_WRITE_P : process(clk,rst_n)
begin
if (rst_n='0') then
temp_i <= (others => '0');
conf_tmp275 <= (others => '0');
Tlow_tmp275 <= (others => '0');
Thigh_tmp275 <= (others =>'0');
elsif (clk'event and clk='1') then
case ptr_tmp275_i is
when TemperatureRegisterAddress => temp_i <= reg_temp; -- This register is written by the serial interface
when ConfigRegisterAddress => conf_tmp275 <= reg_tmp275(15 downto 8) & "00000000"; -- R/W Configuration register
when HysteresisRegisterAddressLow => Tlow_tmp275 <= reg_tmp275; -- R/W Tlow register
when HysteresisRegisterAddressHigh => Thigh_tmp275 <= reg_tmp275; -- R/W T high register
when others => NULL;
end case;
end if;
end process;
TMP275_READ_P : process(clk,rst_n)
begin
if rst_n='0' then
data_out_i <= (others => '0');
elsif (clk'event and clk='1') then
case ptr_tmp275_i is
when TemperatureRegisterAddress => data_out_i <= temp_i; --Temperature Regisyer R only, default
when ConfigRegisterAddress => data_out_i <= conf_tmp275; -- R/W Configuration register
when HysteresisRegisterAddressLow => data_out_i <= Tlow_tmp275; -- R/W Tlow register
when HysteresisRegisterAddressHigh => data_out_i <= Thigh_tmp275; -- R/W T high register
when others => NULL;
end case;
end if;
end process;
--status_tmp275 <= temp_i;
end architecture;

View file

@ -0,0 +1,159 @@
-------------------------------------------------------------------------------
--! @file
--! @brief PEI D3000 head data processor
--!
--! @details See
--! https://congis.atlassian.net/wiki/spaces/HMBSED3000/pages/153157992473/PEI+D3000+Design+Documentation
--!
--! @b Clock/resets:
--! @li lvds_clk_in : LVDS clock, nominally 350MHz (PEI interface)
--!
--! @b Interfaces:
--! rx_data : Deserialised LVDS to head
--! rx_clk : Deserialised LVDS clk
--!
--! @b Clock-crossing considerations:
--! @li Single clock only
--!
--! @b Language build standard requirements:
--! @li VHDL 2008
--!
--! @author Dave Steele
--! @copyright (c) 2020 Global Inkjet Systems
--! @date 2022-08-02
-------------------------------------------------------------------------------
-- altera vhdl_input_version vhdl_2008
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pkg_functions_pei.all;
entity head_data_proc is
port (
rx_data : in std_logic_vector (7 downto 0);
rx_clk : in std_logic;
clk_sys : in std_logic;
rst_n : in std_logic;
cmd_reset : in std_logic;
latch_pulse : in std_logic; -- indicates signature is valid and a latch has occurred
--decoded outputs
signature : out std_logic_vector (31 downto 0)
);
end entity head_data_proc;
architecture struct of head_data_proc is
component head_datain
port
(
datain : in std_logic_vector (7 DOWNTO 0);
aclr : in std_logic;
inclock : in std_logic ;
dataout_h : out std_logic_vector (7 DOWNTO 0);
dataout_l : out std_logic_vector (7 DOWNTO 0)
);
end component;
type array_t is array (1 downto 0) of std_logic_vector (7 downto 0);
signal data_sign : std_logic_vector (7 downto 0);
signal sigLatched : std_logic_vector (31 downto 0);
signal sig : std_logic_vector (31 downto 0);
signal latch_pulse_int : std_logic_vector (1 downto 0);
signal reset_sig : std_logic;
signal rx_data_h_int : array_t;
signal rx_data_l_int : array_t;
signal pulse_sync_neg : std_logic;
signal pulse_sync_sys_d1 : std_logic;
signal pulse_sync_sys_d2 : std_logic;
signal data_pulse : std_logic;
signal data_pulse_sync_sys_d1 : std_logic;
signal data_pulse_sync_sys_d2 : std_logic;
signal latch_pulse_sys_d1 : std_logic;
signal latch_pulse_sys_d2 : std_logic;
begin
cdc_data_p : process(rx_clk)
begin
if falling_edge(rx_clk) then --clocking of falling edge to use all clock period. Data l and h changes on rising edge
rx_data_h_int(0) <= rx_data; -- delays left from a previous version
rx_data_h_int(1) <= rx_data_h_int(0);
pulse_sync_neg <= not pulse_sync_neg;
end if;
if (rst_n ='0' or reset_sig ='1') then
rx_data_h_int <= (others => (others =>'0'));
pulse_sync_neg <='0';
end if;
end process;
cdc_head_clk: process(clk_sys) -- printhead clock is more than 5 time slower than clk_sys
begin
if rising_edge(clk_sys) then
pulse_sync_sys_d1 <= pulse_sync_neg;
pulse_sync_sys_d2 <= pulse_sync_sys_d1;
latch_pulse_int(0) <= latch_pulse;
latch_pulse_int(1) <= latch_pulse_int(0);
data_pulse <='0';
if ((pulse_sync_sys_d1 xor pulse_sync_sys_d2)='1') then
data_sign <= rx_data_h_int(0);
data_pulse <='1';
end if;
reset_sig <='0';
if (latch_pulse_int(0)='0' and latch_pulse_int(1) ='1') then
reset_sig <='1';
end if;
if (rst_n= '0' or cmd_reset = '1') then
data_sign <= (others => '0');
reset_sig <='0';
end if;
end if;
end process;
SIGNATURE_P : process(all)
variable fb :std_logic;
begin
if (clk_sys'event and clk_sys = '1') then
if (reset_sig = '1') then
sigLatched <= sig;
sig <= (others => '0');
fb := '0';
elsif (data_pulse = '1' ) then
fb := sig(30) xor sig(7);
sig <= (sig(30 downto 0) & fb) xor (x"000000" & data_sign); --32 bit a zero has been padded to the left
end if;
end if;
if (rst_n = '0' or cmd_reset ='1') then
sigLatched <= (others => '0');
sig <= (others => '0');
fb := '0';
end if;
end process;
signature <= sigLatched;
end architecture struct;

View file

@ -0,0 +1,264 @@
/*
Module description
Control block of mcp4631 (digital potentiometer)
@author Dave Rodriguez
@copyright (c) 2020 Global Inkjet Systems
@date 2023-01-04
-- The MCP4631 uses the I2C protocol to control its functionality. It has a small set of register that set the position of the wiper and a satus registers to report configuration and state
*/
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pei_register_pkg.all;
--add_out has been elminated. The I2C interface decodes write and read frame
entity mcp4631 is
GENERIC(
--Paramaters for the debugger
ADDRESS_MCP4631 : integer range 0 to 255 :=0
);
PORT(
clk : in std_logic;
rst_n : in std_logic;
scl_in : in std_logic;
scl_out : out std_logic;
sda_in : in std_logic;
sda_out : out std_logic;
start_w_i2c : in std_logic;
start_r_i2c : in std_logic;
i2c_master_rd_dv : out std_logic;
i2c_mcp4631_busy : out std_logic;
i2c_address : in std_logic_vector(7 downto 0);
wr_nbytes : in std_logic_vector(15 downto 0);
reg_mcp4631_in : in std_logic_vector(15 downto 0);
reg_mcp4631_out : out std_logic_vector(15 downto 0)
);
end entity mcp4631;
architecture struct of mcp4631 is
component simple_i2c_masterPEI
generic ( CLOCK_DIVIDER : std_logic_vector(9 downto 0));
port (
clk : IN std_logic;
scl_in : IN std_logic;
scl_out : OUT std_logic;
sda_in : IN std_logic;
sda_out : OUT std_logic;
cmd_wr_cnt_in : IN std_logic_vector(7 downto 0);
cmd_rd_cnt_in : IN std_logic_vector(7 downto 0);
wr_data_in : IN std_logic_vector(7 downto 0);
wr_dv_in : IN std_logic;
rdy_for_data_out : OUT std_logic;
rdy_for_cmd_out : OUT std_logic;
dv_out : OUT std_logic;
rd_data_out : OUT std_logic_vector(7 downto 0);
error : OUT std_logic
);
end component;
type i2c_state_machine is (IDLE, FRAME_DATA_W, FRAME_DATA_R, WAIT_STOP);
signal I2c_master_sate : i2c_state_machine;
signal sda_d1, sda_d2 : std_logic;
signal i2c_stop : std_logic;
signal wr_i2c_mcp4631 : std_logic;
signal tx_dv : std_logic;
signal dv_out : std_logic;
signal rd_cmd : std_logic;
signal i2c_error : std_logic;
signal frame_cnt_w : std_logic_vector(7 downto 0);
signal frame_cnt_r : std_logic_vector(7 downto 0);
signal wr_data_in : std_logic_vector(7 downto 0);
signal rd_i2c_data : std_logic_vector(7 downto 0);
signal count_frame : std_logic_vector(7 downto 0);
signal reg_mcp4631_int : std_logic_vector(15 downto 0);
begin
--ADD generic I2C address
frame_cnt_w <= wr_nbytes(7 downto 0);
i2c_masterPEI_inst : simple_i2c_masterPEI
generic map
(
-- CLK_FREQ_HZ => CLK_FREQ_MHZ * 1000000,
--BUS_FREQ_HZ => I2C_FREQ_KHZ * 1000
CLOCK_DIVIDER => std_logic_vector(to_unsigned(500,10))
)
port map
(
clk => clk,
--rst_n => rst_n,
scl_in => scl_in,
scl_out => scl_out,
sda_in => sda_in,
sda_out => sda_out,
cmd_wr_cnt_in => frame_cnt_w, -- write frameAddress+command+data. std_logic_vector(to_unsigned(3,8))
cmd_rd_cnt_in => frame_cnt_r, -- the read frame is fixed to i2caddress+2xdataframe.
wr_data_in => wr_data_in, -- data to be written.
wr_dv_in => wr_i2c_mcp4631, -- change state from Idle to Start.
rdy_for_data_out => tx_dv, -- It goes high during the SLV_ACK, indicates the end of the transaction.
rdy_for_cmd_out => rd_cmd, -- Flag showing I2C is idle state. Master is in Idle state when this flag is high.
dv_out => dv_out, -- rd_dv ready data valid.
rd_data_out => rd_i2c_data, -- data out.
error => i2c_error -- i2c error.
);
--Address_mcp4631<= ADDRESS_MCP4631; --8 bit as 0 (change to "1" for read)
I2C_process: process(clk, rst_n)
begin
if (rst_n='0' or i2c_error='1') then
wr_data_in <= (others => '0');
I2c_master_sate <= IDLE;
wr_i2c_mcp4631 <='0';
count_frame <= (others => '0');
i2c_master_rd_dv <= '0';
i2c_mcp4631_busy <= '0';
reg_mcp4631_out <= (others => '0');
reg_mcp4631_int <= (others => '0');
--frame_cnt_w <= (others => '0');
elsif (clk'event and clk='1') then
case I2c_master_sate is
when IDLE =>
reg_mcp4631_out <= (others => '0');
count_frame <= (others => '0');
i2c_mcp4631_busy <= '0';
i2c_master_rd_dv <= '0';
if (start_w_i2c = '1' and rd_cmd = '1') then
I2c_master_sate <= FRAME_DATA_W;
wr_data_in <= i2c_address;
wr_i2c_mcp4631 <='1';
reg_mcp4631_int <= reg_mcp4631_in;
--frame_cnt_w <= std_logic_vector(to_unsigned(3,8)); --Maybe 4 Address+Command+(2*DataFrame)
i2c_mcp4631_busy <= '1';
elsif (start_r_i2c = '1' and rd_cmd = '1') then
I2c_master_sate <= FRAME_DATA_R;
wr_data_in <= i2c_address(7 downto 1) & '1';
wr_i2c_mcp4631 <='1';
frame_cnt_r <= std_logic_vector(to_unsigned(3,8)); --Maybe 4 Address+Command+(2*DataFrame)
i2c_mcp4631_busy <= '1';
else
I2c_master_sate <= IDLE;
wr_i2c_mcp4631 <='0';
end if;
when FRAME_DATA_W => --ONLY 2 data frames. The STOP condition should stop
wr_i2c_mcp4631 <= '0';
if (i2c_stop = '1'and dv_out='0') then
I2c_master_sate <= IDLE;
else
I2c_master_sate <= FRAME_DATA_W;
end if;
if (tx_dv='1') then
count_frame <= std_logic_vector(unsigned(count_frame)+1);
if ( unsigned(count_frame) = unsigned(frame_cnt_w) ) then
I2c_master_sate <= WAIT_STOP;
else
I2c_master_sate <= FRAME_DATA_W;
reg_mcp4631_int(15 downto 8) <= reg_mcp4631_int(7 downto 0);
wr_data_in <= reg_mcp4631_int(15 downto 8); --MSB first
end if;
end if;
when FRAME_DATA_R =>
wr_i2c_mcp4631 <='0';
i2c_mcp4631_busy <= '1';
if (i2c_stop = '1' and dv_out='0')then
I2c_master_sate <= IDLE;
--else
--I2c_master_sate <= FRAME_DATA_R;
end if;
if (dv_out='1') then
reg_mcp4631_out(7 downto 0) <= rd_i2c_data; --MSB first
reg_mcp4631_out(15 downto 8) <= reg_mcp4631_out(7 downto 0);
count_frame <= std_logic_vector(unsigned(count_frame)+1);
if (unsigned(count_frame) = 1) then
I2c_master_sate <= WAIT_STOP;
i2c_master_rd_dv <='1';
else
I2c_master_sate <= FRAME_DATA_R;
end if;
end if;
when WAIT_STOP =>
wr_i2c_mcp4631 <= '0';
i2c_mcp4631_busy <= '1';
if (i2c_stop = '1') then
I2c_master_sate <= IDLE;
reg_mcp4631_int <= (others => '0');
else
I2c_master_sate <= WAIT_STOP;
end if;
when others =>
wr_i2c_mcp4631 <= '0';
i2c_master_rd_dv <='0';
i2c_mcp4631_busy <= '0';
end case;
end if;
end process;
i2c_stop_p: process(clk, rst_n)--detects stop condition
begin
if (rst_n = '0') then
i2c_stop <= '0';
elsif (clk'event and clk='1') then
sda_d1 <= sda_out;
sda_d2 <= sda_d1;
i2c_stop <= '0';
if (sda_d2 = '0' and sda_d1 = '1' and scl_out='1') then
i2c_stop <= '1';
end if;
end if;
end process;
--add re-start condition
end architecture struct;

View file

@ -0,0 +1,941 @@
//----------------------------------------------------------------------------
// Module Description
//
// This is a simple debug serial port, providing terminal access to an internal bus.
// The port does not require a FIFO, as long as the UART Baud rate is significantly slower than the system clock (10:1 should be sufficient)
// A full-duplex link is assumed.
//
// Supported commands are :
// R 0xAA
// W 0xAA 0xDDDDDDDD
//
// The serial port automatically inserts whitespaces, carriage returns, and "0x", so the text entered to perform a write
// is "WAADDDDDDDD"
//
// Address and data width are determined at instantiaton through parameters. Valid range is 1 to 32
//
// Interface:
// To UART
// rx_dv shall be valid for 1 clock pulse
// rx_data shall be valid when dv is high
// tx_dv is valid for 1 clock pulse
// tx_data is valid when tx_dv is high.
// tx_dv shall not be asserted unless tx_rdy is asserted.
// tx_busy is not used (this is a subset of tx_rdy).
//
// To System Bus
// wr_en is asserted for 1 clock cycle
// wr_data, add, src_id_out are valid when wr_en is asserted.
// rd_en is asserted for 1 clock cycle (this allows interfacing to systems that support posted reads).
// After rd_en is asserted, the unit waits for rd_dv to be valid. A timeout should probably be added to prevent hangs by reads to non-existent addresses.
// src_id is provided in the interface to allow posted reads to be received out-of-order and be correctly routed.
// Posted reads (and src_id) are not implemented in this version.
//
//----------------------------------------------------------------------------
// Revision Date Author Notes
//
// 01 22-02-2009 Gordon Leather First written
//
//----------------------------------------------------------------------------
`resetall
`timescale 1ns/1ps
module pei_debug_serial_port_1 #(
parameter ADDRESS_WIDTH = 8,
parameter DATA_WIDTH = 32
)(
input wire clk,
input wire tx_rdy_in,
input wire tx_busy_in,
output wire tx_en_out,
output wire tx_dv_out,
output wire [7:0] tx_data_out,
input wire rx_err_in,
input wire rx_dv_in,
input wire [7:0] rx_data_in,
output wire rx_en_out,
output wire [ADDRESS_WIDTH-1:0] add_out,
output wire [DATA_WIDTH-1:0] wr_data_out,
output wire [5:0] src_id_out,
output wire wr_en_out,
output wire rd_en_out,
input wire [DATA_WIDTH-1:0] rd_data_in, //Data fetch by FPGA after an a read request
input wire [5:0] src_id_in,
input wire rd_dv_in,
input wire rd_32b_in
);
// Address and Data character counts
localparam ADDRESS_CHARS = ((ADDRESS_WIDTH + 3) / 4); // Ensure character count is a full nibble
localparam DATA_CHARS = ((DATA_WIDTH + 3) / 4); // Ensure character count is a full nibble
// ASCII definitions
localparam ASCII_TAB = 8'h09;
localparam ASCII_CR = 8'h0d;
localparam ASCII_LF = 8'h0a;
localparam ASCII_SPACE = 8'h20;
localparam ASCII_DASH = 8'h2d;
localparam ASCII_DOT = 8'h2e;
localparam ASCII_0 = 8'h30;
localparam ASCII_1 = 8'h31;
localparam ASCII_2 = 8'h32;
localparam ASCII_3 = 8'h33;
localparam ASCII_4 = 8'h34;
localparam ASCII_5 = 8'h35;
localparam ASCII_6 = 8'h36;
localparam ASCII_7 = 8'h37;
localparam ASCII_8 = 8'h38;
localparam ASCII_9 = 8'h39;
localparam ASCII_GT = 8'h3e;
localparam ASCII_A = 8'h41;
localparam ASCII_B = 8'h42;
localparam ASCII_C = 8'h43;
localparam ASCII_D = 8'h44;
localparam ASCII_E = 8'h45;
localparam ASCII_F = 8'h46;
localparam ASCII_G = 8'h47;
localparam ASCII_H = 8'h48;
localparam ASCII_I = 8'h49;
localparam ASCII_J = 8'h4a;
localparam ASCII_K = 8'h4b;
localparam ASCII_L = 8'h4c;
localparam ASCII_M = 8'h4d;
localparam ASCII_N = 8'h4e;
localparam ASCII_O = 8'h4f;
localparam ASCII_P = 8'h50;
localparam ASCII_Q = 8'h51;
localparam ASCII_R = 8'h52;
localparam ASCII_S = 8'h53;
localparam ASCII_T = 8'h54;
localparam ASCII_U = 8'h55;
localparam ASCII_V = 8'h56;
localparam ASCII_W = 8'h57;
localparam ASCII_X = 8'h58;
localparam ASCII_Y = 8'h59;
localparam ASCII_Z = 8'h5a;
localparam ASCII_a = 8'h61;
localparam ASCII_b = 8'h62;
localparam ASCII_c = 8'h63;
localparam ASCII_d = 8'h64;
localparam ASCII_e = 8'h65;
localparam ASCII_f = 8'h66;
localparam ASCII_g = 8'h67;
localparam ASCII_h = 8'h68;
localparam ASCII_i = 8'h69;
localparam ASCII_j = 8'h6a;
localparam ASCII_k = 8'h6b;
localparam ASCII_l = 8'h6c;
localparam ASCII_m = 8'h6d;
localparam ASCII_n = 8'h6e;
localparam ASCII_o = 8'h6f;
localparam ASCII_p = 8'h70;
localparam ASCII_q = 8'h71;
localparam ASCII_r = 8'h72;
localparam ASCII_s = 8'h73;
localparam ASCII_t = 8'h74;
localparam ASCII_u = 8'h75;
localparam ASCII_v = 8'h76;
localparam ASCII_w = 8'h77;
localparam ASCII_x = 8'h78;
localparam ASCII_y = 8'h79;
localparam ASCII_z = 8'h7a;
// String counts
localparam WELCOME_LAST_CHAR = 17;
localparam PROMPT_LAST_CHAR = 1;
localparam ERR_LAST_CHAR = 7;
localparam PRE_DATA_LAST_CHAR = 4;
// Timeouts
localparam TIMEOUT_10MS = 20'd960000;
// State machine states
localparam RESET = 6'd0;
localparam ERROR = 6'd1;
localparam PROMPT = 6'd2;
localparam IDLE = 6'd3;
localparam PRE_DATA = 6'd4;
localparam GET_ADD_7 = 6'd5;
localparam GET_ADD_6 = 6'd6;
localparam GET_ADD_5 = 6'd7;
localparam GET_ADD_4 = 6'd8;
localparam GET_ADD_3 = 6'd9;
localparam GET_ADD_2 = 6'd10;
localparam GET_ADD_1 = 6'd11;
localparam GET_ADD_0 = 6'd12; // GET ADD States must be sequential, descending from GET_ADD_7
localparam GET_DATA_7 = 6'd13;
localparam GET_DATA_6 = 6'd14;
localparam GET_DATA_5 = 6'd15;
localparam GET_DATA_4 = 6'd16;
localparam GET_DATA_3 = 6'd17;
localparam GET_DATA_2 = 6'd18;
localparam GET_DATA_1 = 6'd19;
localparam GET_DATA_0 = 6'd20; // GET DATA States must be sequential, descending from GET_DATA_7
localparam WRITE = 6'd21;
localparam WRITE_1 = 6'd22;
localparam READ = 6'd23;
localparam READ_1 = 6'd24;
localparam SEND_ADD_7 = 6'd25;
localparam SEND_ADD_6 = 6'd26;
localparam SEND_ADD_5 = 6'd27;
localparam SEND_ADD_4 = 6'd28;
localparam SEND_ADD_3 = 6'd29;
localparam SEND_ADD_2 = 6'd30;
localparam SEND_ADD_1 = 6'd31;
localparam SEND_ADD_0 = 6'd32; // SEND ADD States must be sequential, descending from GET_ADD_7
localparam SEND_DATA_7 = 6'd33;
localparam SEND_DATA_6 = 6'd34;
localparam SEND_DATA_5 = 6'd35;
localparam SEND_DATA_4 = 6'd36;
localparam SEND_DATA_3 = 6'd37;
localparam SEND_DATA_2 = 6'd38;
localparam SEND_DATA_1 = 6'd39;
localparam SEND_DATA_0 = 6'd40; // SEND DATA States must be sequential, descending from GET_DATA_7
// Derived states, based on Address and Data size
localparam GET_ADD = (GET_ADD_7 + 8 - ADDRESS_CHARS );
localparam GET_DATA = (GET_DATA_7 + 8 - DATA_CHARS );
localparam SEND_ADD = (SEND_ADD_7 + 8 - ADDRESS_CHARS );
localparam SEND_DATA = (SEND_DATA_7 + 8 - DATA_CHARS );
// Internal signals
reg [31:0] address = 32'd0;
reg [31:0] data = 32'd0;
reg [31:0] data_new = 32'd0;
reg data_rdy = 1'b0;
reg mode_rnw = 1'b0;
reg rd_en = 1'b0;
reg wr_en = 1'b0;
reg [5:0] state = RESET;
reg [5:0] next_state = RESET;
reg [7:0] welcome_char; // Not assigned a startup value as combinatorial
reg [7:0] prompt_char; // Not assigned a startup value as combinatorial
reg [7:0] err_char; // Not assigned a startup value as combinatorial
reg [7:0] pre_data_char; // Not assigned a startup value as combinatorial
reg [7:0] Append;
reg [7:0] idx = 8'd0;
reg [7:0] tx_data = 0;
reg tx_dv = 1'b0;
reg rx_en = 1'b1;
wire char_A_F;
wire char_a_f;
wire char_0_9;
wire char_hex;
wire [7:0] hex_A_F;
wire [7:0] hex_a_f;
wire [7:0] hex_0_9;
// Rx "FIFO" Signals
wire [8:0] rx_fifo_data;
reg [8:0] rx_fifo_q = 9'd0;
reg rx_fifo_empty_int = 1'b1;
wire rx_fifo_empty;
reg rx_fifo_rd_ack;
wire [7:0] rx_data_byte;
// Output assignments
assign tx_data_out = tx_data;
assign tx_dv_out = tx_dv;
assign tx_en_out = 1'b1; // Permanently enable transmitter - no good for RS-485 link
assign rx_en_out = rx_en; // Permanently enable receiver
assign add_out = address[ADDRESS_WIDTH-1 : 0];
assign wr_data_out = data_new[DATA_WIDTH-1 : 0];
assign wr_en_out = wr_en;
assign rd_en_out = rd_en;
assign src_id_out = 6'd0; // This is used to identify returns from posted reads. Not implemented in this instance.
// Main state machine
always @(posedge clk)
begin
case (state)
RESET :
begin
if (state==RESET)
begin
state <= IDLE; // Change implemented by DR to move FSM away from idle for simulation
rx_en <= 1'b1;
end
else
begin
tx_dv <= tx_rdy_in;
tx_data <= welcome_char;
rx_fifo_rd_ack <= 1'b0;
if (tx_rdy_in)
begin
if (idx == WELCOME_LAST_CHAR) idx <= 8'd0;
else idx <= idx + 8'd1;
if (idx == WELCOME_LAST_CHAR) state <= PROMPT;
end
end
end
ERROR :
begin
tx_dv <= tx_rdy_in;
tx_data <= err_char;
rx_fifo_rd_ack <= 1'b0;
if (tx_rdy_in)
begin
if (idx == ERR_LAST_CHAR) idx <= 8'd0;
else idx <= idx + 8'd1;
if (idx == ERR_LAST_CHAR) state <= PROMPT;
end
end
PROMPT :
begin
tx_dv <= tx_rdy_in;
tx_data <= Append;
rx_fifo_rd_ack <= 1'b0;
if (tx_rdy_in)
begin
if (idx == PROMPT_LAST_CHAR) idx <= 8'd0;
else idx <= idx + 8'd1;
if (idx == PROMPT_LAST_CHAR) state <= IDLE;
end
end
IDLE :
begin
tx_dv <= 1'b0;
rx_en <= 1'b1;
// Set idx to send shortened string for Read and Writes
if ( (rx_data_byte == ASCII_R) | (rx_data_byte == ASCII_r)
| (rx_data_byte == ASCII_W) | (rx_data_byte == ASCII_w)) idx <= 8'd0; // updated by DR it was set to idx <= 2
else begin
idx <= 8'd0;
state <= IDLE; //modified by DR
end
// Select next state and mode
// Requires data before changing state
if(rx_dv_in || data_rdy) //rx_en is zero when returns from READ or WRITE states. There data
begin
data_rdy <= 1'b0;
address <= 32'd0; // reset address and data
data <= 32'd0;
if (((rx_data_byte == ASCII_W) | (rx_data_byte == ASCII_w)) |( (rx_data_byte == ASCII_R) | (rx_data_byte == ASCII_r) )) //state <= PRE_DATA; modified by DR
begin
mode_rnw <= ((rx_data_byte == ASCII_R) | (rx_data_byte == ASCII_r));
state <= GET_ADD;
end
else state <= ERROR;
end
end
PRE_DATA :
begin
tx_dv <= tx_rdy_in;
tx_data <= pre_data_char;
rx_fifo_rd_ack <= 1'b0;
state <= next_state; // moified by DR
end
GET_ADD_7 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[31:28] <= hex_A_F[3:0];
else if (char_a_f) address[31:28] <= hex_a_f[3:0];
else address[31:28] <= hex_0_9[3:0];
if (char_hex) state <= GET_ADD_6;
else state <= ERROR;
end
end
GET_ADD_6 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[27:24] <= hex_A_F[3:0];
else if (char_a_f) address[27:24] <= hex_a_f[3:0];
else address[27:24] <= hex_0_9[3:0];
if (char_hex) state <= GET_ADD_5;
else state <= ERROR;
end
end
GET_ADD_5 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[23:20] <= hex_A_F[3:0];
else if (char_a_f) address[23:20] <= hex_a_f[3:0];
else address[23:20] <= hex_0_9[3:0];
if (char_hex) state <= GET_ADD_4;
else state <= ERROR;
end
end
GET_ADD_4 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[19:16] <= hex_A_F[3:0];
else if (char_a_f) address[19:16] <= hex_a_f[3:0];
else address[19:16] <= hex_0_9[3:0];
if (char_hex) state <= GET_ADD_3;
else state <= ERROR;
end
end
GET_ADD_3 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[15:12] <= hex_A_F[3:0];
else if (char_a_f) address[15:12] <= hex_a_f[3:0];
else address[15:12] <= hex_0_9[3:0];
if (char_hex) state <= GET_ADD_2;
else state <= ERROR;
end
end
GET_ADD_2 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[11:8] <= hex_A_F[3:0];
else if (char_a_f) address[11:8] <= hex_a_f[3:0];
else address[11:8] <= hex_0_9[3:0];
if (char_hex) state <= GET_ADD_1;
else state <= ERROR;
end
end
GET_ADD_1 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[7:4] <= hex_A_F[3:0];
else if (char_a_f) address[7:4] <= hex_a_f[3:0];
else address[7:4] <= hex_0_9[3:0];
if (char_hex) state <= GET_ADD_0;
else state <= ERROR;
end
end
GET_ADD_0 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) address[3:0] <= hex_A_F[3:0];
else if (char_a_f) address[3:0] <= hex_a_f[3:0];
else address[3:0] <= hex_0_9[3:0];
if (mode_rnw) state <= READ;
else if (char_hex) state <= GET_DATA; //state <= PRE_DATA; modified by DR
else state <= ERROR;
if (char_hex & ~mode_rnw) idx <= 8'd0; // Don't print extra tabs unless in read mode
else idx <= 8'd0;
end
end
GET_DATA_7 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) data[31:28] <= hex_A_F[3:0];
else if (char_a_f) data[31:28] <= hex_a_f[3:0];
else data[31:28] <= hex_0_9[3:0];
if (char_hex) state <= GET_DATA_6;
else state <= ERROR;
end
end
GET_DATA_6 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) data[27:24] <= hex_A_F[3:0];
else if (char_a_f) data[27:24] <= hex_a_f[3:0];
else data[27:24] <= hex_0_9[3:0];
if (char_hex) state <= GET_DATA_5;
else state <= ERROR;
end
end
GET_DATA_5 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) data[23:20] <= hex_A_F[3:0];
else if (char_a_f) data[23:20] <= hex_a_f[3:0];
else data[23:20] <= hex_0_9[3:0];
if (char_hex) state <= GET_DATA_4;
else state <= ERROR;
end
end
GET_DATA_4 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) data[19:16] <= hex_A_F[3:0];
else if (char_a_f) data[19:16] <= hex_a_f[3:0];
else data[19:16] <= hex_0_9[3:0];
if (char_hex) state <= GET_DATA_3;
else state <= ERROR;
end
end
GET_DATA_3 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) data[15:12] <= hex_A_F[3:0];
else if (char_a_f) data[15:12] <= hex_a_f[3:0];
else data[15:12] <= hex_0_9[3:0];
if (char_hex) state <= GET_DATA_2;
else state <= ERROR;
end
end
GET_DATA_2 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) data[11:8] <= hex_A_F[3:0];
else if (char_a_f) data[11:8] <= hex_a_f[3:0];
else data[11:8] <= hex_0_9[3:0];
if (char_hex) state <= GET_DATA_1;
else state <= ERROR;
end
end
GET_DATA_1 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
if (char_A_F) data[7:4] <= hex_A_F[3:0];
else if (char_a_f) data[7:4] <= hex_a_f[3:0];
else data[7:4] <= hex_0_9[3:0];
if (char_hex) state <= GET_DATA_0;
else state <= ERROR;
end
end
GET_DATA_0 :
begin
tx_dv <= 1'b0;
if(rx_dv_in)
begin
rx_en <= 1'b0;
data_rdy <= 1'b0;
if (char_A_F) data[3:0] <= hex_A_F[3:0];
else if (char_a_f) data[3:0] <= hex_a_f[3:0];
else data[3:0] <= hex_0_9[3:0];
if (char_hex)
begin
state <= WRITE; //state <= PRE_DATA; Modified by DR
end
else state <= ERROR;
next_state <= WRITE;
if (char_hex) idx <= 8'd0; // Don't print extra tabs from here
else idx <= 8'd0;
end
end
WRITE :
begin
tx_dv <= 1'b0;
rx_en <= 1'b0;
wr_en <= 1'b1;
state <= WRITE_1;
data_new <= data;
end
WRITE_1 :
begin
rx_en <= 1'b0;
wr_en <= 1'b0;
state <= IDLE;
if(rx_dv_in) data_rdy <= 1'b1;
end
READ :
begin
rx_en <=1'b0;
rx_fifo_rd_ack <= 1'b0;
tx_dv <= 1'b0;
rd_en <= 1'b1;
state <= READ_1;
end
READ_1 :
begin
rx_en <=1'b0;
if (rd_dv_in)
begin
rd_en <= 1'b0;
data <= rd_data_in;
if (rd_32b_in)
state <= SEND_DATA_7;
else
state <= SEND_DATA_3;
end
end
SEND_ADD_7 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[31:28] > 4'd9) tx_data <= {4'd0,address[31:28]} + 8'h37;
else tx_data <= {4'd0,address[31:28]} + ASCII_0;
if (tx_rdy_in) state <= SEND_ADD_6;
end
SEND_ADD_6 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[27:24] > 4'd9) tx_data <= {4'd0,address[27:24]} + 8'h37;
else tx_data <= {4'd0,address[27:24]} + ASCII_0;
if (tx_rdy_in) state <= SEND_ADD_5;
end
SEND_ADD_5 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[23:20] > 4'd9) tx_data <= {4'd0,address[23:20]} + 8'h37;
else tx_data <= {4'd0,address[23:20]} + ASCII_0;
if (tx_rdy_in) state <= SEND_ADD_4;
end
SEND_ADD_4 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[19:16] > 4'd9) tx_data <= {4'd0,address[19:16]} + 8'h37;
else tx_data <= {4'd0,address[19:16]} + ASCII_0;
if (tx_rdy_in) state <= SEND_ADD_3;
end
SEND_ADD_3 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[15:12] > 4'd9) tx_data <= {4'd0,address[15:12]} + 8'h37;
else tx_data <= {4'd0,address[15:12]} + ASCII_0;
if (tx_rdy_in) state <= SEND_ADD_2;
end
SEND_ADD_2 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[11:8] > 4'd9) tx_data <= {4'd0,address[11:8]} + 8'h37;
else tx_data <= {4'd0,address[11:8]} + ASCII_0;
if (tx_rdy_in) state <= SEND_ADD_1;
end
SEND_ADD_1 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[7:4] > 4'd9) tx_data <= {4'd0,address[7:4]} + 8'h37;
else tx_data <= {4'd0,address[7:4]} + ASCII_0;
if (tx_rdy_in) state <= SEND_ADD_0;
end
SEND_ADD_0 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (address[3:0] > 4'd9) tx_data <= {4'd0,address[3:0]} + 8'h37;
else tx_data <= {4'd0,address[3:0]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA;
idx <= 0; // Don't print extra tabs
end
SEND_DATA_7 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[31:28] > 4'd9) tx_data <= {4'd0,data[31:28]} + 8'h37;
else tx_data <= {4'd0,data[31:28]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA_6;
end
SEND_DATA_6 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[27:24] > 4'd9) tx_data <= {4'd0,data[27:24]} + 8'h37;
else tx_data <= {4'd0,data[27:24]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA_5;
end
SEND_DATA_5 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[23:20] > 4'd9) tx_data <= {4'd0,data[23:20]} + 8'h37;
else tx_data <= {4'd0,data[23:20]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA_4;
end
SEND_DATA_4 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[19:16] > 4'd9) tx_data <= {4'd0,data[19:16]} + 8'h37;
else tx_data <= {4'd0,data[19:16]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA_3;
end
SEND_DATA_3 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[15:12] > 4'd9) tx_data <= {4'd0,data[15:12]} + 8'h37;
else tx_data <= {4'd0,data[15:12]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA_2;
end
SEND_DATA_2 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[11:8] > 4'd9) tx_data <= {4'd0,data[11:8]} + 8'h37;
else tx_data <= {4'd0,data[11:8]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA_1;
end
SEND_DATA_1 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[7:4] > 4'd9) tx_data <= {4'd0,data[7:4]} + 8'h37;
else tx_data <= {4'd0,data[7:4]} + ASCII_0;
if (tx_rdy_in) state <= SEND_DATA_0;
end
SEND_DATA_0 :
begin
rx_en <=1'b0;
tx_dv <= tx_rdy_in;
if (data[3:0] > 4'd9) tx_data <= {4'd0,data[3:0]} + 8'h37;
else tx_data <= {4'd0,data[3:0]} + ASCII_0;
if (tx_rdy_in) state <= PROMPT;
end
default :
begin
rx_fifo_rd_ack <= 1'b0;
tx_dv <= 1'b0;
wr_en <= 1'b0;
rd_en <= 1'b0;
idx <= 8'd0;
state <= RESET;
rx_en <= 1'b1;
data_rdy <= 1'b0;
end
endcase
end
assign char_A_F = ((rx_data_byte >= 8'h41) & (rx_data_byte <= 8'h46));
assign char_a_f = ((rx_data_byte >= 8'h61) & (rx_data_byte <= 8'h66));
assign char_0_9 = ((rx_data_byte >= 8'h30) & (rx_data_byte <= 8'h39));
assign char_hex = char_0_9 | char_A_F | char_a_f;
assign hex_A_F = rx_data_byte - 8'h37;
assign hex_a_f = rx_data_byte - 8'h57;
assign hex_0_9 = rx_data_byte - ASCII_0;
// Generate message "Debug Terminal"
always @(*) begin
case(idx)
8'd0 : welcome_char = ASCII_LF;
8'd1 : welcome_char = ASCII_LF;
8'd2 : welcome_char = ASCII_LF;
8'd3 : welcome_char = ASCII_CR;
8'd4 : welcome_char = ASCII_D;
8'd5 : welcome_char = ASCII_e;
8'd6 : welcome_char = ASCII_b;
8'd7 : welcome_char = ASCII_u;
8'd8 : welcome_char = ASCII_g;
8'd9 : welcome_char = ASCII_SPACE;
8'd10 : welcome_char = ASCII_T;
8'd11 : welcome_char = ASCII_e;
8'd12 : welcome_char = ASCII_r;
8'd13 : welcome_char = ASCII_m;
8'd14 : welcome_char = ASCII_i;
8'd15 : welcome_char = ASCII_n;
8'd16 : welcome_char = ASCII_a;
default : welcome_char = ASCII_l;
endcase
end
// Generate message "\n->"
always @(*) begin
case (idx)
8'd0 : prompt_char = ASCII_LF;
8'd1 : prompt_char = ASCII_CR;
8'd2 : prompt_char = ASCII_DASH;
default : prompt_char = ASCII_GT;
endcase
end
// Generate message " BAD CMD"
always @(*) begin
case(idx)
8'd0 : err_char = ASCII_TAB;
8'd1 : err_char = ASCII_B;
8'd2 : err_char = ASCII_A;
8'd3 : err_char = ASCII_D;
8'd4 : err_char = ASCII_SPACE;
8'd5 : err_char = ASCII_C;
8'd6 : err_char = ASCII_M;
default : err_char = ASCII_D;
endcase
end
// Generate message " 0x"
always @(*) begin
case (idx)
8'd0 : pre_data_char = ASCII_TAB;
8'd1 : pre_data_char = ASCII_TAB;
8'd2 : pre_data_char = ASCII_TAB;
8'd3 : pre_data_char = ASCII_0;
default : pre_data_char = ASCII_x;
endcase
end
// Generate <CR/LF>
always @(*) begin
case (idx)
8'd0 : Append = ASCII_CR;
default : Append = ASCII_LF;
endcase
end
// Instantiate FIFO to buffer RX data from UART.
assign rx_fifo_data = {rx_err_in, rx_data_in};
assign rx_data_byte = rx_data_in;
assign rx_fifo_empty = (rx_fifo_empty_int | rx_fifo_rd_ack); // Gate with rd_ack to prevent double reads
// For the debug link, a dummy FIFO is implemented, on the basis that even posted reads will return quicker than a new character arriving.
// Also, the user is expected to wait for the read to return before issuing further commands.
always @(posedge clk)
begin
if (rx_dv_in) rx_fifo_q <= rx_fifo_data;
if (rx_dv_in) rx_fifo_empty_int <= 1'b0;
else if (rx_fifo_rd_ack) rx_fifo_empty_int <= 1'b1;
end
endmodule

View file

@ -0,0 +1,189 @@
--This version uses the uart decoder design with FIFO: pei_decoder_uart_0
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
entity pei_debug_uart_1 is
generic(
--Paramaters for the debugger
ADDRESS_WIDTH : integer range 1 to 32 := 8;
DATA_WIDTH : integer range 1 to 32 :=32;
--Parameters for the uart serdes
BAUD_RATE : integer range 9600 to 115200 := 115200;
TEST_MODE : boolean := false
);
PORT(
clk : IN STD_LOGIC;
--external pei connector
dbg_ser_out : OUT STD_LOGIC;
dbg_ser_in : IN STD_LOGIC;
--write block. Data from printhead and stm8
add_out : OUT STD_LOGIC_VECTOR (ADDRESS_WIDTH-1 DOWNTO 0); -- Address signal
wr_data_out : OUT STD_LOGIC_VECTOR (DATA_WIDTH-1 DOWNTO 0); --write data
--src_id_out : OUT STD_LOGIC_VECTOR (5 DOWNTO 0); // This is used to identify returns from posted reads. Not implemented in this instance.
wr_en_out : OUT STD_LOGIC; -- write control signal
--read block--
rd_data_in : IN STD_LOGIC_VECTOR (DATA_WIDTH-1 DOWNTO 0); --data from fpga
--src_id_in : IN STD_LOGIC_VECTOR (5 DOWNTO 0); // This is used to identify returns from posted reads. Not implemented in this instance.
rd_en_out : OUT STD_LOGIC; -- read request signal
rd_dv_in : IN STD_LOGIC; -- read data valid signal
rd_32b_in : IN STD_LOGIC -- read data is 32b not 16b
);
end entity pei_debug_uart_1;
architecture struct of pei_debug_uart_1 is
function calc_oversample_rate (TEST_MODE : boolean) return integer is
begin
if TEST_MODE then
return 5;
else
return 16;
end if;
end function calc_oversample_rate;
function calc_clock_divider (BAUD_RATE : integer; TEST_MODE : boolean) return integer is
begin
if TEST_MODE then
return 6;--32;
else
return (100000000/BAUD_RATE)/16; -- 54 for 115200 (16 is oversample rate)
end if;
end function calc_clock_divider;
constant OVERSAMPLE_RATE : integer := calc_oversample_rate(TEST_MODE);
constant ENABLE_CLOCK_DIVIDER : integer := calc_clock_divider(BAUD_RATE, TEST_MODE);
component pei_debug_serial_port_1
generic(
ADDRESS_WIDTH : integer range 1 to 31 := 8;
DATA_WIDTH : integer range 1 to 32 :=32
);
PORT (
clk : IN STD_LOGIC;
tx_rdy_in : IN STD_LOGIC;
tx_busy_in : IN STD_LOGIC;
tx_en_out : OUT STD_LOGIC; --perm. ON
tx_dv_out : OUT STD_LOGIC;
tx_data_out : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
rx_err_in : IN STD_LOGIC;
rx_dv_in : IN STD_LOGIC;
rx_data_in : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
rx_en_out : OUT STD_LOGIC; --perm ON
add_out : OUT STD_LOGIC_VECTOR (ADDRESS_WIDTH-1 DOWNTO 0);
wr_data_out : OUT STD_LOGIC_VECTOR (DATA_WIDTH-1 DOWNTO 0);
src_id_out : OUT STD_LOGIC_VECTOR (5 DOWNTO 0);
wr_en_out : OUT STD_LOGIC;
rd_en_out : OUT STD_LOGIC;
rd_data_in : IN STD_LOGIC_VECTOR (DATA_WIDTH-1 DOWNTO 0);
src_id_in : IN STD_LOGIC_VECTOR (5 DOWNTO 0);
rd_dv_in : IN STD_LOGIC;
rd_32b_in : IN STD_LOGIC
);
end component;
-- the block unbuffered_uart deserialises the data stream coming from the connector
component pei_decoder_uart_1
generic(
OVERSAMPLE_RATE : integer range 1 to 16 :=3;
ENABLE_CLOCK_DIVIDER : integer range 1 to 63 :=10
);
PORT(
clk : IN STD_LOGIC;
uart_de_out : OUT STD_LOGIC; -- copy of uart_tx_en_in
uart_rx_data_out : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
uart_rx_dv_out : OUT STD_LOGIC;
uart_rx_en_in : IN STD_LOGIC;
uart_rx_in : IN STD_LOGIC;
uart_rx_error_out : OUT STD_LOGIC;
uart_tx_data_in : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
uart_tx_dv_in : IN STD_LOGIC;
uart_tx_en_in : IN STD_LOGIC;
uart_tx_out : OUT STD_LOGIC;
uart_tx_rdy_out : OUT STD_LOGIC;
uart_tx_busy_out : OUT STD_LOGIC
);
end component;
signal s_tx_rdy_out, s_tx_busy_out, s_tx_dv_in, s_rx_error_out : std_logic; -- PEI
signal s_de_out,s_rx_en, s_rx_dv_out, s_tx_to_decoder : std_logic;
signal s_tx_data_in, s_rx_data_out : std_logic_vector (7 downto 0);
--mapping pei_unbuffered_uart_0
begin
--Instantiate uart blocks
decoder_uart_inst: pei_decoder_uart_1
generic map (
OVERSAMPLE_RATE => OVERSAMPLE_RATE,
ENABLE_CLOCK_DIVIDER => ENABLE_CLOCK_DIVIDER
)
port map (
-- system clock
clk => clk,
--I/O pints
uart_tx_out => dbg_ser_out, -- connected to the RxD pin of the J4 connector
uart_rx_in => dbg_ser_in, -- connected to the TxD pin of the J4 connector
-- connection to the uart decoder.
uart_tx_rdy_out => s_tx_rdy_out, -- Control signal. Tells the decoder that deser is ready to transmit
uart_tx_busy_out => s_tx_busy_out, -- Control signal. Tell the decoder that serialiaser is busy transmitting
uart_tx_dv_in => s_tx_dv_in, -- Control signal. The decoder signals to deser that there is valid data to be transmitted
uart_tx_data_in => s_tx_data_in, -- data from decoder to transmit
uart_rx_dv_out => s_rx_dv_out,
uart_rx_en_in => s_rx_en,
uart_de_out => open, -- this signal shows that there is a transmission
uart_rx_error_out => s_rx_error_out,
uart_tx_en_in => s_tx_to_decoder,
uart_rx_data_out => s_rx_data_out
);
debug_serial_port_inst : pei_debug_serial_port_1
port map (
clk => clk,
tx_rdy_in => s_tx_rdy_out, -- control signal from external deser
tx_busy_in => s_tx_busy_out, -- no connected
tx_en_out => s_tx_to_decoder, -- it is always on
tx_dv_out => s_tx_dv_in, --validate data
tx_data_out => s_tx_data_in,
rx_err_in => s_rx_error_out, -- error from deser
rx_dv_in => s_rx_dv_out ,
rx_data_in => s_rx_data_out,
rx_en_out => s_rx_en,
add_out => add_out, -- address from ftdi to fpga
wr_data_out => wr_data_out, -- data from ftdi to fpga
src_id_out => open, -- not used in this version
wr_en_out => wr_en_out, -- write enable controlled by decoder
rd_en_out => rd_en_out, -- read enable controlled by
rd_data_in => rd_data_in, --data from fpga to ftdi
src_id_in => (others =>'0'), -- not used in this version
rd_dv_in => rd_dv_in, -- Enable transmission from FPGA to ftdi chip
rd_32b_in => rd_32b_in
);
end architecture struct;

View file

@ -0,0 +1,320 @@
//----------------------------------------------------------------------------
// Module Description
//
// This is a simple UART, capable of full duplex operation.
// Data format is fixed as 8N1, LSB first.
// It is intended to be used with a FIFO if necessary.
// Timings are set by parameters at instantiation.
//
// Interface:
// rx_dv is valid for 1 clock pulse
// rx_data_out is valid when dv is high
// tx_dv shall be valid for 1 clock pulse, after which tx_rdy is de-asserted.
// tx_data shall be valid when tx_dv is high.
// If tx_dv is asserted while tx_rdy is de-asserted, tx_dv is ignored.
//
//----------------------------------------------------------------------------
// Revision Date Author Notes
//
// 01 22-02-2009 Gordon Leather First written
// 02 04-10-2023 David Rodriguez Added buffer to sync requests with the rest of the design
//----------------------------------------------------------------------------
`resetall
`timescale 1ns/1ps
module pei_decoder_uart_1 #(
parameter OVERSAMPLE_RATE = 5'd16,
parameter ENABLE_CLOCK_DIVIDER = 6'd52
)
(
// Port Declarations
input wire clk,
output wire uart_de_out,
output wire [7:0] uart_rx_data_out,
output wire uart_rx_dv_out,
input wire uart_rx_en_in,
input wire uart_rx_in,
output wire uart_rx_error_out,
input wire [7:0] uart_tx_data_in,
input wire uart_tx_dv_in,
input wire uart_tx_en_in,
output wire uart_tx_out,
output wire uart_tx_rdy_out,
output wire uart_tx_busy_out
);
// Parameters
// Internal Declarations
localparam DATA_BITS = 4'd8;
localparam EDGE_DETECT_POSITION = OVERSAMPLE_RATE/2;
localparam PACKET_WIDTH = 16'd7;
localparam FIFO_DEPTH = 16'd255;
localparam PTR_MSB = 16'd8;
localparam ADDR_MSB = 16'd3;
// RX State machine constants
localparam RX_IDLE = 3'd0;
localparam RX_GET_START = 3'd1;
localparam RX_GET_DATA = 3'd2;
localparam RX_GET_STOP = 3'd3;
localparam RX_GET_STOP_1 = 3'd4;
// TX State machine constants
localparam TX_IDLE = 2'b0;
// Internal Declarations
reg [OVERSAMPLE_RATE-1:0] rx_sr = 0;
reg [5:0] en_cnt = 6'd0;
reg [4:0] rx_bit_tmr = (OVERSAMPLE_RATE-5'd1);
reg [4:0] tx_bit_tmr = (OVERSAMPLE_RATE-5'd1);
reg rx_en_int = 1'b1;
wire [7:0] fifo_data;
wire clk_en;
wire rx_neg_edge;
wire rx_bit_valid;
reg [2:0] rx_state = RX_IDLE;
reg [3:0] rx_bit_cnt = DATA_BITS - 4'd1;
reg rx_receiving = 1'b0;
reg rx_done = 1'b0;
reg rdreq_fifo = 1'b0;
reg wrreq_fifo = 1'b0;
reg rx_error = 1'b0;
reg [7:0] rx_data = 8'd0;
wire fifo_full;
wire fifo_emp;
wire tx_new_word;
wire tx_next_bit;
wire tx_last_bit;
wire tx_done;
//reg [7:0] fifo_data;
reg [3:0] tx_bit_cnt = DATA_BITS + 4'd2;
reg tx_ignore_idle = 1'b0;
reg [9:0] tx_data = 10'h3ff; // Extra bits allow easy addition of start bit to data.
reg tx_rdy = 1'b1;
reg tx_busy = 1'b0;
reg rx_dv_out = 1'b0;
reg rdreq_fifo_d1 = 1'b1;
// Output assignments
//assign uart_rx_data_out = rx_data;
assign uart_rx_data_out = fifo_data;
assign uart_rx_dv_out = rx_dv_out;
assign uart_rx_error_out = rx_error;
assign uart_tx_rdy_out = tx_rdy & ~uart_tx_dv_in & uart_tx_en_in; // Combinatorial output, often required for RDY interface to FIFOs
assign uart_tx_out = tx_data[0];
assign uart_de_out = uart_tx_en_in;
assign uart_tx_busy_out = tx_busy;
//fifo_v20 external module
fifo_v20 u1 (.clock(clk),.data(rx_data),.rdreq(rdreq_fifo),.sclr(),.wrreq(rx_done),
.almost_empty(), .almost_full(), .empty(fifo_emp), .full(fifo_full), .q(fifo_data),.usedw());
//----------------------------------------------------------------------------
// Common Functions
//----------------------------------------------------------------------------
//
// Clock enable generation
assign clk_en = (en_cnt == (ENABLE_CLOCK_DIVIDER-1));
always @(posedge clk)
begin
if (clk_en) en_cnt <= 6'd0;
else en_cnt <= en_cnt + 6'd1;
end
//----------------------------------------------------------------------------
// END Common Functions
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
// UART Transmitter
//----------------------------------------------------------------------------
//
always @(posedge clk)
begin
if (uart_tx_en_in)
begin
if (tx_new_word) tx_ignore_idle <= ~tx_busy;
else if (tx_next_bit) tx_ignore_idle <= 1'b0;
if (tx_new_word) tx_data <= {uart_tx_data_in, 1'b0, 1'b1}; // Data, Start bit, Idle bit. Ignore writes when busy,
else if (tx_next_bit) tx_data <= {1'b1, tx_data[9:1]}; // Shift data along. Shifting '1's in gives us the stop bit.
if (~tx_busy | tx_next_bit) tx_bit_tmr <= (OVERSAMPLE_RATE-5'd1);
else if (clk_en) tx_bit_tmr <= tx_bit_tmr - 5'd1;
if (tx_new_word) tx_bit_cnt <= DATA_BITS + 4'd2;
else if (tx_next_bit) tx_bit_cnt <= tx_bit_cnt - 4'd1;
if (tx_new_word) tx_busy <= 1'b1; // This takes priority, to allow continuous transmission
else if (tx_done) tx_busy <= 1'b0;
if (tx_new_word) tx_rdy <= 1'b0;
else if (~tx_busy | tx_last_bit) tx_rdy <= 1'b1; // Ready for new data as soon as the last bit has been transmitted, or when not busy.
end
else
begin
tx_bit_tmr <= (OVERSAMPLE_RATE-5'd1);
tx_bit_cnt <= DATA_BITS + 4'd2;
tx_data <= 10'h3ff;
tx_busy <= 1'b0;
tx_rdy <= 1'b1;
end
end
assign tx_new_word = uart_tx_dv_in & tx_rdy; // Ignore writes when not ready
assign tx_next_bit = clk_en & ((tx_busy & (tx_bit_tmr == 0)) | tx_ignore_idle);
assign tx_last_bit = tx_next_bit & (tx_bit_cnt == 1);
assign tx_done = tx_next_bit & (tx_bit_cnt == 0);
//----------------------------------------------------------------------------
// END UART Transmitter
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
// UART Receiver
//----------------------------------------------------------------------------
//
// Rx edge detect and bit timer
always @(posedge clk)
begin
if (clk_en)
begin
if (rx_en_int) rx_sr <= {rx_sr[OVERSAMPLE_RATE-2:0], uart_rx_in}; // Oversample Rx input
else rx_sr <= 0; // Reset required to avoid false triggers on restart
if (rx_receiving && (rx_bit_tmr>0)) rx_bit_tmr <= rx_bit_tmr - 5'd1; // Timer for sampling bits
else rx_bit_tmr <= (OVERSAMPLE_RATE - 5'd1);
end
end
assign rx_neg_edge = (rx_sr[EDGE_DETECT_POSITION] & ~rx_sr[EDGE_DETECT_POSITION-1]);
assign rx_bit_valid = (rx_bit_tmr == 0);
// Rx State machine
// This state machine only supports 8N1 data format
always @(posedge clk)
begin
if (clk_en)
begin
if (rx_en_int)
begin
case (rx_state)
RX_GET_START : if (rx_neg_edge)
begin
rx_bit_cnt <= DATA_BITS- 4'd1; // Ensure correct number of bits are counted
rx_receiving <= 1'b1;
rx_state <= RX_GET_DATA; // State transition
end
RX_GET_DATA : if (rx_bit_valid)
begin
rx_data <= {uart_rx_in, rx_data[7:1]}; // Register Data
rx_bit_cnt <= rx_bit_cnt - 4'd1; // and decrement bit counter
if (rx_bit_cnt == 0) rx_state <= RX_GET_STOP; // Change state on last bit
end
RX_GET_STOP : if (rx_bit_valid)
begin
rx_error <= ~uart_rx_in; // Stop bit should be a '1'
rx_state <= RX_GET_STOP_1; // State transition
end
RX_GET_STOP_1 : if (rx_bit_tmr == (OVERSAMPLE_RATE/2)) // Delay to ensure Stop bit is fully received
begin // This is necessary to prevent turnaround time problems
rx_done <= 1'b1;
rx_receiving <= 1'b0;
rx_state <= RX_IDLE; // State transition
end
default : begin
rx_receiving <= 1'b0;
rx_done <= 1'b0;
rx_error <= 1'b0;
if (rx_en_int) rx_state <= RX_GET_START; // State transition
end
endcase
end
else
begin
rx_state <= RX_IDLE;
rx_done <= 1'b0;
end
end
else
begin
rx_done <= 1'b0; // Required so only one pulse given.
end
end
/////////////////////RXFIFO////////////
//wrreq is mapped to rx_done
// rdreq is high when the fifo is not empty
// fifo_data has to change with rx_dv flag signal
always @(negedge clk) //redreq changes within the same clock cycle as fifo_emp changes to 1
begin
rdreq_fifo_d1 <= rdreq_fifo;
rdreq_fifo <= 1'b0;
wrreq_fifo <= 1'b0;
if (fifo_emp == 1'b0 && uart_rx_en_in == 1'b1 && rdreq_fifo ==1'b0) rdreq_fifo <= 1'b1;
if (fifo_full == 1'b0 && rx_done == 1'b1) wrreq_fifo <= 1'b1;
end
always @ (posedge clk)
begin
rx_dv_out <= 1'b0;
//fifo_data <= fifo_data_int;
if (rdreq_fifo_d1 == 1'b1 && rdreq_fifo ==1'b0) rx_dv_out <= 1'b1;
end
//----------------------------------------------------------------------------
// END UART Receiver
//----------------------------------------------------------------------------
endmodule

View file

@ -0,0 +1,754 @@
-------------------------------------------------------------------------------
--! @file
--! @brief PEI FPGA top level
--!
--! @details See
--! https://congis.atlassian.net/wiki/spaces/HMBSED3000/pages/153157992473/PEI+D3000+Design+Documentation
--! https://congis.atlassian.net/wiki/spaces/HMBSED3000/pages/153168281734/PEI-SE-D3000+EL+document
--!
--! @b Clock/resets:
--! @li clk25_in : nominally 25MHz
--! @li lvds_clk_in : LVDS clock, nominally 350MHz (PEI interface)
--!
--! @b Interfaces:
--! lvds_d_in : Signals from D3000 to head
--! dac_out : DAC data and DAC SPI signals
--! nled_* : Debug LED outputs
--! v_pg : Power good input signals
--! v_en : Power enable output signals
--! heater_en : Heater enable outputsignal
--! scl_fpga,sda_fpga : I2C slave interface
--! D_in[0:3] : Printhead data
--! D_clk : Sync_clk
--! ID[0..1] : Data mode
--! LVDSOE : Logic signal to enable desarialiser
--! A[0..1] : Address data
--!
--! scl_fpga,sda_fpga : I2C slave interface
--!
--! @b Clock-crossing considerations:
--! @li The LVDS out clock and internal system clock are asynchronous.
--! Signals should not cross domains in this design.
--!
--! @b Language build standard requirements:
--! @li VHDL 2008
--!
--! @author Dave Steele
--! @copyright (c) 2020 Global Inkjet Systems
--! @date 2021-04-21
-------------------------------------------------------------------------------
-- altera vhdl_input_version vhdl_2008
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pei_register_pkg.all;
entity pei_fpga_top is
generic (
DEVICE_FAMILY : string := "Cyclone 10 LP";
ADDRESS_WIDTH : integer range 1 to 32 := 8;
DATA_WIDTH : integer range 1 to 32 := 32;
TEST_MODE : boolean := false
);
port (
clk25_in : in std_logic; --board clock
dbg_ser_out : out std_logic;
dbg_ser_in : in std_logic;
c_clk : in std_logic_vector(1 downto 0);
head_lat : in std_logic_vector(1 downto 0);
two_col : in std_logic;
head_data : in std_logic_vector(7 downto 0);
nled_g : out std_logic;
nled_y : out std_logic;
nled_r : out std_logic;
sda_fpga : inout std_logic;
scl_fpga : inout std_logic;
stm8_alert_in : in std_logic_vector(1 downto 0);
alert_out : out std_logic;
temp_alert_in : in std_logic;
shutdn : out std_logic;
v_en : out std_logic_vector(3 downto 0);
wf_sel : out std_logic_vector(2 downto 0);
cfg_ncs : out std_logic;
cfg_wdata : out std_logic;
hd_scl_fpga : inout std_logic;
hd_sda_fpga : inout std_logic;
--xhot_n : out std_logic;
lvdsoe : in std_logic;
debug_out : out std_logic_vector(5 downto 1)
);
end entity pei_fpga_top;
architecture struct of pei_fpga_top is
constant FPGA_VERSION : std_logic_vector(15 downto 0):= x"007A"; -- increment this every time you make a significant change
component io_buf_i2c
PORT
(
datain : in std_logic_vector (0 DOWNTO 0);
oe : in std_logic_vector (0 DOWNTO 0);
dataio : inout std_logic_vector (0 DOWNTO 0);
dataout : out STD_LOGIC_VECTOR (0 DOWNTO 0)
);
end component;
component simple_i2c_slave
port
(
clk : in std_logic;
scl_in : in std_logic;
scl_out : out std_logic;
sda_in : in std_logic;
sda_out : out std_logic;
i2c_busy_out : out std_logic;
add_out : out std_logic_vector(15 downto 0);
wr_data_out : out std_logic_vector( 7 downto 0);
wr_en_out : out std_logic;
rd_en_out : out std_logic;
rd_data_in : in std_logic_vector( 7 downto 0);
rd_dv_in : in std_logic
);
end component;
component i2c_slv_simple_eprom
generic ( DEVICE_ADDRESS : integer :=0);
port
(
clk : in std_logic;
lvdsoe : in std_logic;
scl_in : in std_logic;
scl_out : out std_logic;
sda_in : in std_logic;
sda_out : out std_logic;
i2c_busy_out : out std_logic;
add_out : out std_logic_vector(15 downto 0);
wr_data_out : out std_logic_vector(7 downto 0);
wr_en_out : out std_logic;
rd_en_out : out std_logic
);
end component;
component pll_25in_100out_pei
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
end component;
component pei_debug_uart_1
generic(
--Paramaters for the debugger
ADDRESS_WIDTH : integer range 1 to 32 := 8;
DATA_WIDTH : integer range 1 to 32 :=32;
--Parameters for the uart serdes
BAUD_RATE : integer range 9600 to 115200 := 115200;
TEST_MODE : boolean := false
);
PORT(
clk : IN STD_LOGIC;
--external pei connector
dbg_ser_out : OUT STD_LOGIC;
dbg_ser_in : IN STD_LOGIC;
--write block. Data from printhead and stm8
add_out : OUT STD_LOGIC_VECTOR (ADDRESS_WIDTH-1 DOWNTO 0); -- Address signal
wr_data_out : OUT STD_LOGIC_VECTOR (DATA_WIDTH-1 DOWNTO 0); --write data
--src_id_out : OUT STD_LOGIC_VECTOR (5 DOWNTO 0); // This is used to identify returns from posted reads. Not implemented in this instance.
wr_en_out : OUT STD_LOGIC; -- write control signal
--read block--
rd_data_in : IN STD_LOGIC_VECTOR (DATA_WIDTH-1 DOWNTO 0); --data from fpga
--src_id_in : IN STD_LOGIC_VECTOR (5 DOWNTO 0); // This is used to identify returns from posted reads. Not implemented in this instance.
rd_en_out : OUT STD_LOGIC; -- read request signal
rd_dv_in : IN STD_LOGIC; -- read data valid signal
rd_32b_in : IN STD_LOGIC -- read data is 32b not 16b
);
end component pei_debug_uart_1;
type array_t is array (natural range <>) of std_logic_vector;
signal amp_trip : std_logic_vector(5 downto 0); -- GJL DBG - dummy implementation - amp_trip is replaced with an stm8 alert monitor
-- System clocks
signal clk100 : std_logic := '0';
signal rst_n : std_logic := '0';
signal count : std_logic_vector(9 downto 0) := (others => '0');
-- PEI / PHE signals
--signal pei_dout; : std_logic_vector(15 downto 0) := (others => '0');
signal pei_din : std_logic_vector( 3 downto 0) := (others => '0');
signal test_hdr : std_logic_vector(63 downto 0) := (others => '0');
-- Head signals
signal xhot_int_n : std_logic;
-- I2C signals
signal flagi2c : std_logic;
signal scl_in : std_logic;
signal scl_out : std_logic;
signal scl_sl_out : std_logic;
signal sda_in : std_logic;
signal sda_out : std_logic;
signal sda_sl_out : std_logic;
signal local_readdata : std_logic_vector(31 downto 0);
signal local_read : std_logic;
signal local_write : std_logic;
signal rd_dv : std_logic;
signal hd_scl_in : std_logic;
signal hd_scl_out : std_logic;
signal hd_scl_out_eprom : std_logic;
signal hd_sda_in : std_logic;
signal hd_sda_out : std_logic;
signal hd_sda_out_eprom : std_logic;
signal ena_100us : std_logic;
signal ena_100ms : std_logic;
signal debug_scl, debug_sda : std_logic;
signal lvds_locked : std_logic;
signal data_lvds_clk : std_logic_vector(11 downto 0);
signal data_valid_lvds_clk : std_logic;
signal lvds_uart_data_out_valid : std_logic;
signal lvds_uart_data_out : std_logic_vector(7 downto 0);
signal start_of_data_lvds_clk : std_logic;
signal reg_add : std_logic_vector(ADDRESS_WIDTH-1 downto 0);
signal reg_data : std_logic_vector(DATA_WIDTH-1 downto 0);
--data signals
signal lvds_rx_clk : std_logic;
--uart block
signal add_uart : std_logic_vector(ADDRESS_WIDTH-1 downto 0);
signal add_uart_i : integer;
signal wr_data_uart : std_logic_vector(DATA_WIDTH-1 downto 0);
signal rd_data_uart : std_logic_vector(DATA_WIDTH-1 downto 0);
signal wr_en_uart : std_logic;
signal rd_req_uart : std_logic;
signal oe : std_logic;
signal rd_dv_uart : std_logic;
signal rd_32b_uart : std_logic; -- when low, send back 16 bit data, when high - 32b
signal Byte_transfer : std_logic;
-------------- test signals -----
signal latch,nchg,led_n : std_logic;
signal eprom_busy : std_logic;
signal latch_pulse_rx_clk : std_logic;
signal latch_pulse_rx_clk_d1 : std_logic;
signal latch_pulse_rx_clk_d2 : std_logic;
signal sig_rx_clk : std_logic_vector(31 downto 0);
signal latch_pulse : std_logic;
signal latch_count : std_logic_vector(31 downto 0);
signal signature : std_logic_vector(31 downto 0);
signal cmd_reset : std_logic;
signal reg_thermistor : std_logic_vector(15 downto 0) := x"1900";
signal eprom_addr : std_logic_vector(15 downto 0);
signal eprom_wr_data : std_logic_vector(31 downto 0);
signal counter_led : std_logic_vector(31 downto 0);
signal pulse_length : std_logic_vector(31 downto 0) := x"0c0002ff";
signal conf_tmp275 : std_logic_vector(15 downto 0);
--signal overdriveReg : std_logic_vector(15 downto 0);
signal Thigh_tmp275 : std_logic_vector(15 downto 0) := x"04B0";
signal Tlow_tmp275 : std_logic_vector(15 downto 0) := x"0000";
signal chA, chB, chC : std_logic;
signal sp_table_comA : std_logic_vector(15 downto 0);
signal sp_table_comB : std_logic_vector(15 downto 0);
signal sp_table_comC : std_logic_vector(15 downto 0);
---mcp4631------------------------------------------------------------------
signal reg_mcp4631_in : std_logic_vector(15 downto 0) := x"0000";
signal reg_mcp4631_out : std_logic_vector(15 downto 0) := x"0000";
signal data_frame_i2c : std_logic_vector(15 downto 0) := x"0000";
signal data_fifo_in : std_logic_vector(16 downto 0) := '0' & x"0000";
signal data_frame_i2c_long : std_logic_vector(16 downto 0) := '0' & x"0000";
signal wr_nbytes : std_logic_vector(15 downto 0) := x"0001";
signal i2c_address : std_logic_vector(7 downto 0) := x"20";
signal read_fifo : std_logic;
signal i2c_m_dv : std_logic;
signal wr_fifo_empty : std_logic;
signal wr_fifo_empty_next : std_logic;
signal wr_full_fifo : std_logic;
signal wr_full_next : std_logic;
signal wr_i2c_fifo_dv : std_logic;
signal i2c_mcp4631_busy : std_logic;
signal wr_fifo : std_logic;
signal start_r_mcp4631 : std_logic;
signal start_w_mcp4631 : std_logic;
signal scl_ms_out : std_logic;
signal sda_ms_out : std_logic;
signal wr_uart, rd_uart : std_logic;
signal rd_uart_d1 : std_logic;
signal rx_i2c_flag : std_logic;
begin
------------------------------------------------------------------------------
-- I/O Assignments
------------------------------------------------------------------------------
alert_out <= stm8_alert_in(1) or stm8_alert_in(0); -- **** DCS needs proper combine logic
shutdn <= temp_alert_in;
--debug_out <= "00" & lvds_locked & rst_n & '0';
cfg_ncs <= 'Z'; -- Deselect serial flash
cfg_wdata <= 'Z';
-- test header assignments
--dac_out(39 downto 0) <= test_hdr(39 downto 0);
--dac_out(79 downto 60) <= test_hdr(59 downto 40);
--v_en(3 downto 0) <= test_hdr(63 downto 60);
v_en(3 downto 0) <= (others => 'Z');
---------------------------------
nled_y <= 'Z';
nled_r <= 'Z';
GEN_PLL : if TEST_MODE = false generate
pll_25in_100out_inst : pll_25in_100out_pei
port map (
inclk0 => clk25_in,
c0 => clk100,
locked => rst_n
);
end generate;
-- In test mode, wire the input clock straight through to the system clock
-- The test bench should then provide the input at 200MHz
GEN_TEST_PLL : if TEST_MODE = true generate
TEST_CLK100_PROC : process (clk25_in)
begin
if rising_edge(clk25_in) then
clk100 <= not clk100;
count <= std_logic_vector(unsigned(count) + 1);
if (rst_n = '0' and unsigned(count) > 100) then
rst_n <= '1';
end if;
end if;
end process;
end generate;
head_proc_inst: entity work.head_data_proc
port map (
rx_data => head_data,
rx_clk => c_clk(0),
clk_sys => clk100,
rst_n => rst_n,
cmd_reset => cmd_reset,
--decoded outputs
signature => sig_rx_clk,
latch_pulse => head_lat(0)
);
signature <= sig_rx_clk;
--Debugging. Added by DRM 25/08
--debug_out(4)<= latch_pulse_rx_clk;
debug_out <= (1=>head_lat(0), 2=>'1', 3=>'1', 5=>'1', 4=> '1');
--sync_pulse_sv_inst: entity work.sync_pulse
--port map (clk_in => lvds_rx_clk, rst_n => rst_n, pulse_in => latch_pulse_rx_clk, clk_out => clk100, pulse_out => latch_pulse);
latch_int: process (clk100,rst_n,cmd_reset)
begin
if (clk100'event and clk100 = '1') then
--clock domain cross-over
latch_pulse_rx_clk_d1 <= head_lat(0);
latch_pulse_rx_clk_d2 <= latch_pulse_rx_clk_d1;
if (latch_pulse_rx_clk_d2 = '0' and latch_pulse_rx_clk_d1 = '1') then
latch_count <= std_logic_vector(unsigned(latch_count)+1);
end if;
end if;
if (cmd_reset = '1' or rst_n='0') then
latch_count <= (others => '0');
end if;
end process;
--Ring buffer
write_fifo_inst: entity work.ring_buffer
generic map ( RAM_WIDTH => 17, RAM_DEPTH => 30)
port map (
clk => clk100,
rst_n => rst_n,
-- Write port
wr_en => wr_fifo,
wr_data => data_fifo_in,
-- Read port
rd_en => read_fifo, --i2c is ready to read fifo
rd_valid => wr_i2c_fifo_dv, --
rd_data => data_frame_i2c_long, --16bit data frame + 1bit comand
-- Flags
empty => wr_fifo_empty,
empty_next => wr_fifo_empty_next,
full => wr_full_fifo,
full_next => wr_full_next,
-- The number of elements in the FIFO
fill_count => open
);
proc_mcp4631_i2c:process(clk100)
-- the top bit of data_fifo_in, 17, indicated if the mcp4631 has to change to a write of read command.
-- Edge detection to avoid problem of wr_aurt and rd_uart having a width of more than one clock
begin
if rising_edge(clk100) then
rd_uart_d1 <= rd_uart;
if ( wr_fifo_empty = '1' or wr_i2c_fifo_dv ='1' or i2c_mcp4631_busy = '1') then
read_fifo <= '0'; --no data, or fifo is going to be empty in the next cycle
elsif (( wr_fifo_empty = '0' and i2c_mcp4631_busy ='0' and start_w_mcp4631 = '0' and start_r_mcp4631 = '0')) then
read_fifo <= '1'; --fifo is not empty
else
read_fifo <= '0';
end if;
--17th bith indicates if the command is read or write
wr_fifo <= '0';
if ((wr_uart='1')or (rd_uart='1' and rd_uart_d1='0')) then
wr_fifo <= '1';
end if;
data_fifo_in <='0' & x"0000";
if (wr_uart ='1') then
data_fifo_in <= ('0' & reg_mcp4631_in);
end if;
if (rd_uart = '1' and rd_uart_d1 ='0') then
data_fifo_in <= ('1' & x"FFFF");
end if;
start_w_mcp4631 <= '0';
if (data_frame_i2c_long(16)='0' and wr_i2c_fifo_dv ='1') then
start_w_mcp4631 <= '1';
end if;
start_r_mcp4631 <= '0';
if (data_frame_i2c_long(16)='1' and wr_i2c_fifo_dv ='1') then
start_r_mcp4631 <= '1';
end if;
data_frame_i2c <= data_frame_i2c_long(15 downto 0);
end if;
end process;
------------------------------------------------------------------------------
-- Instantiate FPGA I2C
------------------------------------------------------------------------------
scl_out <= scl_ms_out;
sda_out <= sda_ms_out;
-- Instantiate I2C I/O cells
i2c_scl_io_inst : io_buf_i2c
port map (
datain(0) => scl_out,
oe(0) => not scl_out,
dataio(0) => scl_fpga,
dataout(0) => scl_in
);
i2c_sda_io_inst : io_buf_i2c
port map (
datain(0) => sda_out,
oe(0) => not sda_out,
dataio(0) => sda_fpga,
dataout(0) => sda_in
);
mcp4631_inst: entity work.mcp4631
--generic map(ADDRESS_MCP4631 => 16#58#) --0101100+w/r 6bit plus write and read.
port map(
clk => clk100,
rst_n => rst_n,
reg_mcp4631_in => data_frame_i2c, --data read from fifo
reg_mcp4631_out => reg_mcp4631_out,
scl_in => scl_in,
scl_out => scl_ms_out,
sda_in => sda_in,
sda_out => sda_ms_out,
wr_nbytes => wr_nbytes,
i2c_address => i2c_address,
start_w_i2c => start_w_mcp4631, -- reads from fifo
start_r_i2c => start_r_mcp4631,
i2c_master_rd_dv => i2c_m_dv,
i2c_mcp4631_busy => i2c_mcp4631_busy -- flags end of write transaction
);
-----------------------------------------------------
-- printhead eprom. It is connected to the HMB I2C
----------------------------------------------------
i2c_slv_simple_eprom_inst : i2c_slv_simple_eprom
generic map ( DEVICE_ADDRESS => 16#13# )
port map
(
clk => clk100,
lvdsoe => lvdsoe,
scl_in => hd_scl_in,
scl_out => hd_scl_out_eprom,
sda_in => hd_sda_in,
sda_out => hd_sda_out_eprom,
i2c_busy_out => eprom_busy,
add_out => open,
wr_data_out => open,
wr_en_out => open,
rd_en_out => open
);
------------------------------------------------------------------------------
-- Instantiate Head I2C
------------------------------------------------------------------------------
hd_scl_out <= hd_scl_out_eprom;
hd_sda_out <= hd_sda_out_eprom;
debug_scl <= '0' when (hd_scl_out_eprom = '0' or hd_scl_in = '0') else '1';
debug_sda <= '0' when (hd_sda_out_eprom = '0' or hd_sda_in = '0') else '1';
-- Instantiate I2C I/O cells
hd_i2c_scl_io_inst : io_buf_i2c
port map (
datain(0) => hd_scl_out,
oe(0) => not hd_scl_out,
dataio(0) => hd_scl_fpga,
dataout(0) => hd_scl_in
);
hd_i2c_sda_io_inst : io_buf_i2c
port map (
datain(0) => hd_sda_out,
oe(0) => not hd_sda_out,
dataio(0) => hd_sda_fpga,
dataout(0) => hd_sda_in
);
--I2C temperature sensor process
------------------------------------------------------------------------------
-- uart interface
------------------------------------------------------------------------------
uart_inst: entity work.pei_debug_uart_0
generic map (
--Paramaters for the debugger
ADDRESS_WIDTH => 8,
DATA_WIDTH => 32,
BAUD_RATE => 115200,
TEST_MODE => TEST_MODE
)
port map (
clk => clk100,
dbg_ser_out => dbg_ser_out,
dbg_ser_in => dbg_ser_in,
-- write block
add_out => add_uart,
wr_data_out => wr_data_uart,
wr_en_out => wr_en_uart,
--read block
rd_data_in => rd_data_uart,
rd_en_out => rd_req_uart,
rd_dv_in => rd_dv_uart,
rd_32b_in => rd_32b_uart
);
add_uart_i <= to_integer(unsigned(add_uart));
WRITE_REG_PROC : process (clk100, rst_n)
begin
if rst_n = '0' then
cmd_reset <= '0';
wf_sel <= (others => '0');
eprom_addr <= (others => '0');
eprom_wr_data <= (others => '0');
wr_uart <= '0';
elsif rising_edge(clk100) then
cmd_reset <= '0'; -- self clear
wr_uart <= '0';
if wr_en_uart = '1' then
case add_uart_i is
when ADDR_RESET => cmd_reset <= wr_data_uart(0);
when ADDR_WAVEFORM_SEL => wf_sel <= wr_data_uart(wf_sel'range);
when ADDR_THERMISTOR => reg_thermistor <= wr_data_uart(reg_thermistor'range);
when ADDR_GP_OUT => pulse_length <= wr_data_uart(pulse_length'range); -- create dedicated register later for the green led
when ADDR_EPROM_ADDR => eprom_addr <= wr_data_uart(eprom_addr'range);
when ADDR_EPROM_WR_DATA => eprom_wr_data <= wr_data_uart(eprom_wr_data'range);
when ADDR_STM8_W_NBYTES => wr_nbytes <= wr_data_uart(wr_nbytes'range);
when ADDR_MCP4631 => reg_mcp4631_in <= wr_data_uart(reg_mcp4631_in'range);
wr_uart <= '1';
when I2C_ADDR_STM8 => i2c_address <= wr_data_uart(7 downto 0);
when others => NULL;
end case;
end if;
end if;
end process;
READ_REG_PROC : process (clk100, rst_n)
begin
if rst_n = '0' then
rd_data_uart <= (others => '0');
rd_32b_uart <= '0';
rd_dv_uart <= '0';
rd_uart <='0';
elsif rising_edge(clk100) then
rd_data_uart <= (others => '0');
rd_uart <='0';
rd_32b_uart <= '0'; -- default to 16 bit read back
rd_dv_uart <= '0';
rd_uart <= '0';
if rd_req_uart = '1' then --it las two clock. Modify to make 1 clk width
case add_uart_i is
when ADDR_ID => rd_data_uart(D3000_PEI_ID'range) <= D3000_PEI_ID; rd_32b_uart <= '1'; -- D3000_PEI_ID is 32 bit
when ADDR_VERSION => rd_data_uart(FPGA_VERSION'range) <= FPGA_VERSION;
when ADDR_STATUS => null;
when ADDR_WAVEFORM_SEL => rd_data_uart(wf_sel'range) <= wf_sel;
when ADDR_LATCH_COUNT => rd_data_uart(latch_count'range) <= latch_count;
when ADDR_DATA_SIGNATURE => rd_data_uart(signature'range) <= signature; rd_32b_uart <= '1'; -- signature is 32 bit
when ADDR_GP_OUT => rd_data_uart(pulse_length'range) <= pulse_length; rd_32b_uart <= '1';
when ADDR_THERMISTOR => rd_data_uart(reg_thermistor'range) <= reg_thermistor;
when ADDR_REG_LMP275 => rd_data_uart(conf_tmp275'range) <= conf_tmp275;
when ADDR_THIGH_LMP275 => rd_data_uart(Thigh_tmp275'range) <= Thigh_tmp275;
when ADDR_TLOW_LMP275 => rd_data_uart(Tlow_tmp275'range) <= Tlow_tmp275;
when ADDR_STM8_W_NBYTES => rd_data_uart(wr_nbytes'range) <= wr_nbytes;
-- the registers below are related to D3000
when ADDR_SP_COMA => rd_data_uart(sp_table_comA'range) <= sp_table_comA;
when ADDR_SP_COMB => rd_data_uart(sp_table_comB'range) <= sp_table_comB;
when ADDR_SP_COMC => rd_data_uart(sp_table_comC'range) <= sp_table_comC;
when ADDR_MCP4631 => rd_uart <= '1';
when ADDR_EPROM_ADDR => rd_data_uart(eprom_addr'range) <= eprom_addr;
when ADDR_EPROM_RD_DATA => rd_data_uart(eprom_wr_data'range) <= eprom_wr_data;
when I2C_ADDR_STM8 => rd_data_uart(15 downto 0) <= x"00" & i2c_address;
when others => NULL;
end case;
if (rd_dv_uart='0' and start_r_mcp4631='1' and add_uart_i=ADDR_MCP4631) then -- The read I2C transaction has not started yet
rx_i2c_flag <= '1';
end if;
if (i2c_m_dv='1' and add_uart_i=ADDR_MCP4631 and i2c_mcp4631_busy='1' and rx_i2c_flag ='1') then
rd_dv_uart <= '1';
rd_data_uart(reg_mcp4631_out'range) <= reg_mcp4631_out;
rx_i2c_flag <= '0';
elsif (i2c_m_dv='0' and add_uart_i=ADDR_MCP4631 and i2c_mcp4631_busy='1' and rx_i2c_flag ='1') then
rd_dv_uart <= '0';
rx_i2c_flag <= '1';
elsif (i2c_mcp4631_busy = '0' and add_uart_i=ADDR_MCP4631 and rx_i2c_flag ='1' ) then
rd_dv_uart <= '1';
rd_data_uart(reg_mcp4631_in'range) <= x"ABCD"; --The I2C transaction failed
rx_i2c_flag <= '0';
elsif (add_uart_i=ADDR_MCP4631 and rx_i2c_flag ='0' ) then -- wait for start_r_mcp4631 to change to 1
rd_dv_uart <= '0';
else
rd_dv_uart <= '1';
rx_i2c_flag <= '0';
end if;
-- rd_dv_uart <= '1'; -- always return something to stop hang up
end if;
end if;
end process;
------------------------------------------------------------------------------
-- Instantiate PID
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- Instantiate Power Control
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- Instantiate wave sequencers
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- LED205 Pulse
------------------------------------------------------------------------------
LED_PROC: process(clk100,rst_n) --counter register 31 bit enable
begin
if (rst_n='0') then
led_n <='0';
counter_led <=(others =>'0');
elsif(clk100'event and clk100='1') then
if counter_led = pulse_length then
led_n <= not led_n;
counter_led <= (others =>'0');
else
counter_led <= std_logic_vector(unsigned(counter_led)+1);
end if;
end if;
end process;
nled_g <= led_n;
------------------------------------------------------------------------------
-- Shutdown
------------------------------------------------------------------------------
end architecture struct;

View file

@ -0,0 +1,48 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
package pei_register_pkg is
-- System UART addresses
constant ADDR_ID : integer := 0;
constant ADDR_VERSION : integer := 1;
constant ADDR_RESET : integer := 2;
constant ADDR_STATUS : integer := 3;
constant ADDR_WAVEFORM_SEL : integer := 4;
constant ADDR_LATCH_COUNT : integer := 5;
constant ADDR_DATA_SIGNATURE : integer := 6;
constant ADDR_MCP4631 : integer := 7;
constant ADDR_GP_OUT : integer := 8;
constant ADDR_GP_IN : integer := 9;
constant ADDR_REG_LMP275 : integer := 10;
constant ADDR_THIGH_LMP275 : integer := 11;
constant ADDR_TLOW_LMP275 : integer := 12;
constant ADDR_STM8_W_NBYTES : integer := 14;
constant I2C_ADDR_STM8 : integer := 15;
constant ADDR_EPROM_ADDR : integer := 16;
constant ADDR_EPROM_WR_DATA : integer := 17;
constant ADDR_EPROM_RD_DATA : integer := 18;
constant ADDR_SP_COMA : integer := 19;
constant ADDR_SP_COMB : integer := 20;
constant ADDR_SP_COMC : integer := 21;
constant ADDR_THERMISTOR : integer := 22;
constant D3000_PEI_ID : std_logic_vector(31 downto 0):= x"000F1024";
-- TMP275 addresses
constant TemperatureRegisterAddress : integer := 0;
constant ConfigRegisterAddress : integer := 1;
constant HysteresisRegisterAddressLow : integer := 2;
constant HysteresisRegisterAddressHigh : integer := 3;
end pei_register_pkg;
package body pei_register_pkg is
end pei_register_pkg;

View file

@ -0,0 +1,15 @@
c1_clk -> m15
c2_clk -> m6
c1_lat -> l15 -> dac_out36
c2_lat -> r4 -> dac_out3
d0 -> p8 -> dac_out10
d1 -> r7 -> dac_out8
d2 -> t7 -> dac_out7
d3 -> r6 -> dac_out5
d4 -> t6 -> dac_out6
d5 -> t5 -> dac_out0
d6 -> r5 -> dac_out1
d7 -> t4 -> dac_out2
two_col -> n9 -> dac_out34
head_sda -> r14 -> dac_out29
head_scl -> t15 -> dac_out28

View file

@ -0,0 +1,120 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
package PKG_FUNCTIONS_PEI is
function LOG2(N : integer) return integer;
function NUM_BITS(N : integer) return integer;
function NUM_BITS_NON_ZERO(N : integer) return integer;
function REMAPD3000VEC( VIN: std_logic_vector) return std_logic_vector;
constant DI2T3 : integer := 1;
constant DI4T4 : integer := 2;
constant DE1 : integer := 3;
constant DI1T4 : integer := 4;
constant DI3T3 : integer := 5;
constant DI1T2 : integer := 6;
constant DI1T6 : integer := 7;
constant DI2T2 : integer := 8;
constant DI4T3 : integer := 9;
constant DI4T2 : integer := 10;
constant DI2T6 : integer := 11;
constant DI3T2 : integer := 12;
constant DI4T5 : integer := 13;
constant DE2 : integer := 14;
constant DI3T6 : integer := 15;
constant DI3T1 : integer := 16;
constant DI2T5 : integer := 17;
constant DI1T1 : integer := 18;
constant DI4T6 : integer := 19;
constant DI4T1 : integer := 20;
constant DI1T5 : integer := 21;
constant DI2T1 : integer := 22;
constant DI2T4 : integer := 23;
constant DI3T5 : integer := 24;
constant DI1T3 : integer := 26;
constant DI3T4 : integer := 27;
constant commandvec : std_logic_vector(27 downto 0) :=(DI1T1 => '1', DI1T2 => '1', DI1T3 => '1', DI1T4 => '1', DI1T5 => '1', DI1T6 => '1', others =>'0');
end PKG_FUNCTIONS_PEI;
package body PKG_FUNCTIONS_PEI is
-------------------------------------------------------------------------------
--Returns the log to base 2 of an integer (for N=2^i where i is an integer)
-------------------------------------------------------------------------------
function LOG2(N : integer) return integer is
begin
if(N = 1) then
return 0;
elsif (N = 0) then
--pragma translate_off
report "Invalid input for LOG2 function" severity error;
--pragma translate_on
return 0;
else
return 1 + LOG2(N/2);
end if;
end LOG2;
-------------------------------------------------------------------------------
--Returns the width of the bit vector necessary to encode an integer
-------------------------------------------------------------------------------
function NUM_BITS(N : integer) return integer is
begin
if N < 0 then
--pragma translate_off
report "NUM_BITS function does not work for integers < 0" severity error;
--pragma translate_on
return 0;
elsif N=0 then
return 0;
else
return LOG2(N)+1;
end if;
end NUM_BITS;
-------------------------------------------------------------------------------
--Calculate the number of bits required to hold an integer
--Return 1 if the integer is 0 or 1
--Zero is never returned
function NUM_BITS_NON_ZERO(N : integer) return positive is
begin
if N=0 or N=1 then
return 1;
else
return NUM_BITS(N);
end if;
end NUM_BITS_NON_ZERO;
------------------------------------------------------------------------------
--remap the desarialised output data from adjecent bit from same data line to bit sampled the same clock
--D3000 data format is 4 data lines with a deser factor of 7
-------------------------------------------------------------------------------
function REMAPD3000VEC( VIN: std_logic_vector) return std_logic_vector is
variable VOUT: std_logic_vector(VIN'length-1 downto 0);
begin
loop1: for i in 0 to 6 loop
loop2: for j in 0 to 3 loop
VOUT(4*i+j) := VIN(7*(3-j)+i);
end loop;
end loop;
return VOUT;
end REMAPD3000VEC;
end PKG_FUNCTIONS_PEI;

View file

@ -0,0 +1,139 @@
library ieee;
use ieee.std_logic_1164.all;
entity ring_buffer is
generic (
RAM_WIDTH : natural;
RAM_DEPTH : natural
);
port (
clk : in std_logic;
rst_n : in std_logic;
-- Write port
wr_en : in std_logic;
wr_data : in std_logic_vector(RAM_WIDTH - 1 downto 0);
-- Read port
rd_en : in std_logic;
rd_valid : out std_logic;
rd_data : out std_logic_vector(RAM_WIDTH - 1 downto 0);
-- Flags
empty : out std_logic;
empty_next : out std_logic;
full : out std_logic;
full_next : out std_logic;
-- The number of elements in the FIFO
fill_count : out integer range RAM_DEPTH - 1 downto 0
);
end ring_buffer;
architecture rtl of ring_buffer is
signal wr_en_d1, rd_en_d1 :std_logic;
type ram_type is array (0 to RAM_DEPTH - 1) of std_logic_vector(wr_data'range);
signal ram : ram_type :=(others => (others =>'0'));
subtype index_type is integer range ram_type'range;
signal ptr_wr : index_type; --pointer write
signal ptr_rd : index_type; --pointer read
signal empty_i : std_logic;
signal full_i : std_logic;
signal wr_ram : std_logic;
signal rd_ram : std_logic;
signal fill_count_i : integer range RAM_DEPTH - 1 downto 0;
-- Increment and wrap
procedure incr(signal index : inout index_type) is
begin
if index = index_type'high then
index <= index_type'low;
else
index <= index + 1;
end if;
end procedure;
begin
-- Copy internal signals to output
empty <= empty_i;
full <= full_i;
fill_count <= fill_count_i;
-- Set the flags
empty_i <= '1' when fill_count_i = 0 else '0';
empty_next <= '1' when fill_count_i <= 1 else '0';
full_i <= '1' when fill_count_i >= RAM_DEPTH - 1 else '0';
full_next <= '1' when fill_count_i >= RAM_DEPTH - 2 else '0';
-- Update the head pointer in write
PROC_HEAD : process(clk)
begin
if rising_edge(clk) then
if rst_n = '0' then
wr_ram <= '0';
ptr_wr <=0;
--ptr_wr_next <=0;
else
wr_ram <='0';
if (wr_en='1'and full_i = '0') then
incr(ptr_wr);
--wr_data_int <= wr_data;
end if;
end if;
end if;
end process;
-- Update the tail pointer on read and pulse valid
PROC_TAIL : process(clk)
begin
if rising_edge(clk) then
if rst_n = '0' then
rd_valid <= '0';
ptr_rd <= 0;
else
if (rd_en= '1' and empty_i = '0' and rd_valid = '0') then --turn rd_valid into 1 pulse
incr(ptr_rd);
rd_valid <= '1';
else
rd_valid <= '0';
end if;
end if;
end if;
end process;
-- Write to and read from the RAM
PROC_RAM : process(clk)
begin
if rising_edge(clk) then
ram(ptr_wr) <= wr_data;
rd_data <= ram(ptr_rd);
end if;
end process;
-- Update the fill count
PROC_COUNT : process(ptr_wr, ptr_rd)
begin
if ptr_wr < ptr_rd then
fill_count_i <= ptr_wr - ptr_rd + RAM_DEPTH;
else
fill_count_i <= ptr_wr - ptr_rd;
end if;
end process;
proc_edge :process(clk)
begin
if rising_edge(clk) then
wr_en_d1 <= wr_en;
rd_en_d1 <= rd_en;
end if;
end process;
end architecture;

View file

@ -0,0 +1,27 @@
0f
30
50
32
36
30
39
ad
ad
ad
30
30
ad
30
55
4f
44
4e
47
4d
4a
0a
ff // invalid
ff // invalid
ff // invalid
ff // invalid
ff // invalid

View file

@ -0,0 +1,373 @@
//----------------------------------------------------------------------------
// Module Description
//
// This is a simple I2C master, and does not support multi-master applications.
// The Clock Divider is the ratio between the main clock input, and the required I2C clock.
// The default build assumes a 400kHz I2C clock, and an input clock of 24MHz.
// This gives a clock divider of 24000/400 = 60.
//
// The design is based around 4 clock phases : scl falling, sda change, scl rising, sda read,
// the timing of these is derived from the clock divider
//
// Note SDA expects a tristate-able IO cell, emulating on OD output.
// When SDA is low, output a zero, when high, I/O cell must go to tristate, otherwise reads will not work.
//
//----------------------------------------------------------------------------
// Revision Date Author Notes
//
// 1.0 14-8-2015 GJL First Written
//
//----------------------------------------------------------------------------
`resetall
`timescale 1ns/1ps
module simple_i2c_masterPEI #(
parameter CLOCK_DIVIDER = 10'd200 // Must be >= 4
)
(
input wire clk,
input wire scl_in,
output wire scl_out,
input wire sda_in,
output wire sda_out,
input wire [7:0] cmd_wr_cnt_in,
input wire [7:0] cmd_rd_cnt_in,
input wire [7:0] wr_data_in,
input wire wr_dv_in,
output wire rdy_for_data_out,
output wire rdy_for_cmd_out,
output wire dv_out,
output wire [7:0] rd_data_out,
output wire error
);
//----------------------------------------------------------------------------
// Internal Declarations
//----------------------------------------------------------------------------
// Parameters
// Timing
localparam CLK_DIV_TC = CLOCK_DIVIDER - 10'd1;
localparam SCL_FE_CNT = 10'd0; // SCL FE at 0d
localparam SDA_WR_CNT = {2'b0, CLOCK_DIVIDER[9:2]}; // SDA Write at 90d
localparam SCL_RE_CNT = {1'b0, CLOCK_DIVIDER[9:1]}; // SCL RE at 180d
localparam SDA_RD_CNT = SCL_RE_CNT + SDA_WR_CNT; // SDA Read at 270d
localparam IDLE_PULSE_CNT = SDA_RD_CNT;
// I2C State Machine States
localparam IDLE = 4'd0;
localparam START = 4'd1;
localparam TX_BYTE = 4'd2;
localparam SLV_ACK = 4'd3;
localparam RX_BYTE = 4'd4;
localparam MSTR_ACK = 4'd5;
localparam STOP = 4'd7;
// Internal Signals
// Clock generation
reg [9:0] clk_en_cnt = 10'd0;
reg [9:0] clk_enn_cnt = 10'd0;
wire clk_en_tc;
wire clk_enn_tc;
wire scl_re;
wire scl_fe;
wire sda_wr;
wire sda_rd;
wire idle_pulse;
// I2C byte control
reg [2:0] bit_cnt = 3'd0;
reg in_byte = 1'b0;
reg in_cmd = 1'b0;
reg [7:0] wr_cnt = 8'd0;
reg [7:0] rd_cnt = 8'd0;
reg [7:0] wr_byte = 8'd0;
reg [7:0] rd_byte = 8'd0;
reg [3:0] next_state = START;
reg [3:0] state = IDLE;
reg next_scl_en = 1'b0;
reg scl_en = 1'b0;
reg sda = 1'b1;
reg scl = 1'b1;
reg err = 1'b0;
reg sda_pr = 1'b1;
reg [15:0] sda_mon = 16'b0;
reg [15:0] scl_mon = 16'b0;
reg [9:0] holdoff = 10'd0;
reg [7:0] idle_cnt = 8'd255;
reg dv_tx = 1'b0;
reg shiftdone = 1'b0;
reg endpulse = 1'b0;
reg wr_status = 1'd0;
wire scl_stall;
wire wr_byte_pending;
wire rd_byte_pending;
wire rd_dv;
wire bus_idle;
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
// Output assignments
//----------------------------------------------------------------------------
assign scl_out = scl;
assign sda_out = sda | err;
assign dv_out = rd_dv;
assign rd_data_out = rd_byte;
assign rdy_for_data_out = dv_tx;//(~in_byte);
assign rdy_for_cmd_out = (~in_cmd);
assign error = err;
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
// Clock generation
//----------------------------------------------------------------------------
always @(posedge clk)
begin
if ((~in_byte) | clk_en_tc) clk_en_cnt <= 10'd0; // Don't generate clock enables unless in a byte
else if (~scl_stall) clk_en_cnt <= clk_en_cnt + 1; // If SCL has stalled, pause the count
if (clk_enn_tc) clk_enn_cnt <= 10'd0;
else if (clk_en_cnt == 10'd1)
clk_enn_cnt <= 10'd2;
else
clk_enn_cnt <= clk_enn_cnt + 1;
end
assign clk_en_tc = (clk_en_cnt == CLK_DIV_TC);
assign clk_enn_tc = (clk_enn_cnt== CLK_DIV_TC);
assign scl_fe = (clk_en_cnt == SCL_FE_CNT); //falling edge
assign sda_wr = (clk_en_cnt == SDA_WR_CNT);
assign scl_re = (clk_en_cnt == SCL_RE_CNT);
assign sda_rd = (~scl_stall) & (clk_en_cnt == SDA_RD_CNT); // SCL Stall can only occur after SCL_FE, so only need to gate SDA RD against this.
assign idle_pulse = (clk_enn_cnt == IDLE_PULSE_CNT);
// SCL generation
always @(posedge clk)
begin
if (scl_en)
begin
if (scl_re | state == IDLE | state == START) scl <= 1'b1; // line changed by DRM
else if (scl_fe) scl <= 1'b0;
end
else scl<=1'b1; // when disable, leave scl open drain
end
assign scl_stall = (scl==1'b1) & (scl_in==1'b0); // Used to detect slave holding clock low during interrupts etc.
assign bus_idle = (idle_cnt == 8'd0);
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
// I2C state machine
//----------------------------------------------------------------------------
// Byte Control
assign wr_byte_pending = (|wr_cnt);
assign rd_byte_pending = (|rd_cnt);
assign rd_dv = (state == MSTR_ACK ) & sda_rd; // Generate read dv pulse
//----------------------------------------------------------------------------
// I2C Master State Machine
// All state transitions shall occur on sda_rd (fourth phase of the clock), to ensure timing is correct throughout.
always @(posedge clk)
begin
case (state)
IDLE : begin
bit_cnt <= 3'd0;
scl_en <= 1'd1;
dv_tx <= 1'b0;
shiftdone <= 1'd0;
endpulse <= 1'd0;
//if (holdoff != 10'd0) I am moving the holdoff timing to the end of the frame
//holdoff <= holdoff - 10'd1;
if (wr_dv_in == 1'b1) // SCL and in_byte must be disabled on entry to IDLE state.
begin
in_byte <= 1'b1;
in_cmd <= 1'b1;
err <= 1'b0;
scl_en <= 1'b1;
wr_cnt <= cmd_wr_cnt_in - 8'd1; // load number of words
wr_byte <= wr_data_in;
//next_state <= in_cmd ? TX_BYTE : START;
//state <= START; // if wr_dv_in is high move to START
state <= START;
rd_cnt <= wr_data_in[0] ? cmd_rd_cnt_in : 8'd0; // At this point, it is always a new command
wr_status <= wr_data_in[0];
end
end
START : begin
dv_tx <= 1'b0;
sda <= 1'b0;
//if (sda_wr) sda <= 1'b0; // Drive SDA low while SCL is high (disabled), to generate START condition.
if (sda_wr)
begin
state <= TX_BYTE;
//scl_en <= 1'b1; // Enable SCL after start bit is sent. This is done here, not just in
//sda <= 1'b1; // release data line
//in_byte <= 1'b0;
end
end
TX_BYTE : begin
//in_byte <= 1'b1;
dv_tx <= 1'b0;
if (sda_wr & !shiftdone ) sda <= wr_byte[7]; // SDA sends data MSb first
if (sda_wr & !shiftdone) wr_byte <= {wr_byte[6:0], 1'b0}; // Shift bits along each SCL rising edge
if (sda_wr & !shiftdone) sda_pr <= wr_byte[7];
if (sda_wr & !shiftdone) bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (sda_wr & (&bit_cnt)) // stop when 8bit shift data is completed/
begin
shiftdone = 1'b1;
//state <= SLV_ACK;
//bit_cnt <= 3'd0;
//sda <= 1'b1;
end
if (sda_rd & (|bit_cnt)) begin
if ((sda_pr == 1'b1) && (sda_pr != sda_in)) begin
err <= 1'b1;
state <= STOP;
holdoff <= 10'd100;
end
end
if (scl_fe & shiftdone) // transaction at 8th falling edge. Wait for slave to clock 8th bit
begin
state <= SLV_ACK;
dv_tx <= 1'b1;
shiftdone <= 1'b0;
bit_cnt <= 3'd0;
sda <= 1'b1; // release sda
end
end
SLV_ACK : begin
// This cycle corresponds to the 9th bit. It checks if the slave acknowledges the receive
dv_tx <= 1'b0;
if (scl_re)
begin
if (sda_in == 1'b0)
begin
if (wr_byte_pending & ~wr_status)
begin
state <= TX_BYTE;
wr_cnt <= wr_cnt - 8'd1;
wr_byte <= wr_data_in;
end
else if (wr_status)
begin
state <= SLV_ACK; // wait for a sda_rd event to change state to RX_BYTE
rd_cnt <= rd_cnt -8'd1;
end
else
begin
state <= STOP;
holdoff <= 10'd10;
sda <=1'b0; //prepapre sda line to generate stop condition
end
end
else if (sda_in==1'b1)
begin
state <= STOP;
holdoff <= 10'd10;
end
end
if(sda_rd & wr_status) state <= RX_BYTE;
end
RX_BYTE : begin
if (scl_fe) sda <= 1'b1; //ensure sda is release at the end of the pulse after ACK and slv_ack
if (sda_rd)
begin
rd_byte <= {rd_byte[6:0], sda_in}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1;
if (bit_cnt == 3'd7)
begin
state <= MSTR_ACK; // If last bit, go to Master Acknowledge state
rd_cnt <= rd_cnt - 8'd1; // If last bit, decrement the read count
end
end
end
MSTR_ACK : begin
wr_status <= 1'd0;
if (sda_wr) sda <= rd_byte_pending ? 1'b0 : 1'b1; //Generate NACK or ACK depending if it the last byte
if (sda_rd) state <= rd_byte_pending ? RX_BYTE : STOP; // If read bytes pending, get the next one, else generate STOP.
end
STOP : begin
// Disable SCL after rising edge and SDA stable position
if (sda_rd & endpulse)
begin
state <= IDLE;
sda <= 1'b1; // generate stop condition
idle_cnt <= 8'd32;
in_cmd <= 1'b0;
in_byte <= 1'b0;
endpulse <= 1'b0;
wr_status <= 1'd0;
end
if(scl_fe) endpulse <= 1'b1;
if(scl_fe) sda <= 1'b0; // prepare stop condition after an NACK
end
default : begin // If we end up here, force a STOP condition.
dv_tx <= 1'b0;
scl_en <= 1'b1; // Enable SCL for clock
in_byte <= 1'b1; // Fake in_byte, to block new writes and allow clock to run
state <= STOP;
endpulse <= 1'b0;
wr_status <= 1'd0;
end
endcase
end
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
endmodule

View file

@ -0,0 +1,273 @@
//----------------------------------------------------------------------------
// Module Description
//
// This is a simple I2C slave, with device address fixed at instantiation.
// Data format is 2-Byte Address, 1-Byte data on writes. For reads a 2-byte
// address write is sent, followed by a 1-byte read.
//
// When SDA is low, output a zero, when high, I/O cell must go to tristate, otherwise reads will not work.
//
// Input clock must be at least 12x higher than I2C SCL frequency, i.e. >1.2MHz for 100kHz, >4.8MHz for 400kHz.
//----------------------------------------------------------------------------
// Revision Date Author Notes
//
// 1.0 14-8-2015 GJL First Written
//
//----------------------------------------------------------------------------
`resetall
`timescale 1ns/1ps
module simple_i2c_slave
(
input wire clk,
input wire scl_in,
output wire scl_out,
input wire sda_in,
output wire sda_out,
output wire i2c_busy_out,
output wire [15:0] add_out,
output wire [7:0] wr_data_out,
output wire wr_en_out,
output wire rd_en_out,
input wire [7:0] rd_data_in,
input wire rd_dv_in
);
//----------------------------------------------------------------------------
// Internal Declarations
//----------------------------------------------------------------------------
// Parameters
parameter DEVICE_ADDRESS = 7'h4b; // 7 bit Device Address
parameter WR_SIZE = 2'd2;
// Timing
// I2C State Machine States
localparam IDLE = 3'd0;
localparam RX_BYTE = 3'd1;
localparam SLV_ACK = 3'd2;
localparam ACK_HOLD = 3'd3;
localparam TX_BYTE = 3'd4;
// Internal Signals
reg [2:0] scl_sr = 3'b111;
reg [2:0] sda_sr = 3'b111;
wire scl_re;
wire scl_fe;
wire scl_hi;
wire sda_re;
wire sda_fe;
wire start;
wire stop;
reg [2:0] bit_cnt = 3'd0;
reg [1:0] byte_cnt = 2'd0;
reg sda = 1'b1;
reg scl = 1'b1;
reg read_pending = 1'b0;
reg rnw = 1'b0;
reg [2:0] next_state = RX_BYTE;
reg [2:0] state = IDLE;
reg [15:0] add = 16'd0;
reg [7:0] wr_data = 8'd0;
reg wr_en = 1'b0;
reg i2c_busy = 1'b0;
//----------------------------------------------------------------------------
// Output assignments
//----------------------------------------------------------------------------
assign scl_out = scl;
assign sda_out = sda;
assign i2c_busy_out = i2c_busy;
assign add_out = add;
assign wr_data_out = wr_data;
assign wr_en_out = wr_en;
assign rd_en_out = read_pending;
//----------------------------------------------------------------------------
// Input detection
//----------------------------------------------------------------------------
always @(posedge clk)
begin
scl_sr <= {scl_sr[1:0], scl_in};
sda_sr <= {sda_sr[1:0], sda_in};
end
assign scl_re = (scl_sr[2:1] == 2'b01);
assign scl_fe = (scl_sr[2:1] == 2'b10);
assign scl_hi = (scl_sr[2:1] == 2'b11);
assign sda_re = (sda_sr[2:1] == 2'b01);
assign sda_fe = (sda_sr[2:1] == 2'b10);
assign start = sda_fe & scl_hi;
assign stop = sda_re & scl_hi;
//----------------------------------------------------------------------------
// I2C state machine
//----------------------------------------------------------------------------
reg [7:0] rd_byte = 8'd0;
reg [7:0] rd_data = 8'd0;
//----------------------------------------------------------------------------
// I2C Slave State Machine
//----------------------------------------------------------------------------
always @(posedge clk)
begin
case (state)
IDLE:
begin
bit_cnt <= 3'd0;
byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
wr_en <= 1'b0;
read_pending <= 1'b0;
i2c_busy <= 1'b0;
if (start)
begin
state <= RX_BYTE;
end
end
RX_BYTE :
if (stop)
begin
state <= IDLE;
end
else if (scl_re)
begin
rd_byte <= {rd_byte[6:0], sda_in}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (&bit_cnt)
begin
state <= SLV_ACK; // If last bit, go to Slave Acknowledge state
end
end
SLV_ACK:
if (stop)
begin
state <= IDLE;
end
else if (scl_fe)
begin
byte_cnt <= byte_cnt + 2'd1; // Increment the byte count
if ((byte_cnt == 2'd0) & (rd_byte[7:1] == DEVICE_ADDRESS))
i2c_busy <= 1'b1; // Assert so I/O control passes this through
if ((byte_cnt == 2'd0) & (rd_byte[7:1] != DEVICE_ADDRESS))
state <= IDLE; // If not for us, ignore
else
state <= ACK_HOLD; // Otherwise respond
if (rd_byte[0] & (byte_cnt == 2'd0))
next_state <= TX_BYTE;
else if (byte_cnt == 3'd3)
next_state <= IDLE;
else
next_state <= RX_BYTE;
if (byte_cnt == 2'd0)
rnw <= rd_byte[0];
if (~rnw)
begin
if (byte_cnt == 2'd1)
add[15:8] <= rd_byte;
if (byte_cnt == 2'd2)
add[7:0] <= rd_byte;
if (byte_cnt == 2'd3)
wr_data <= rd_byte;
end
wr_en <= ((~rnw) & (byte_cnt == WR_SIZE)); // Assert write strobe if last byte of a write command
read_pending <= rd_byte[0] & (byte_cnt == 2'd0);
if (byte_cnt == 8'd0)
sda <= (rd_byte[7:1] != DEVICE_ADDRESS); // If receiving byte address, verify before asserting ACK
else
sda <= 1'b0; // Send ACK once line is clear
end
ACK_HOLD:
if (stop)
begin
state <= IDLE;
wr_en <= 1'b0; // Clear write enable
end
else
begin
wr_en <= 1'b0; // Clear write enable
if (rd_dv_in)
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
if (scl_fe)
begin
sda <= 1'b1; // On next falling edge, deassert SDA
scl <= ~read_pending; // If we're waiting for a read, keep SCL low
state <= next_state;
end
end
TX_BYTE:
if (stop)
begin
state <= IDLE;
end
else
begin
if (rd_dv_in)
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
scl <= ~read_pending; // Keep SCL low until read is complete
sda <= rd_data[7];
if (scl_fe)
begin
rd_data <= {rd_data[6:0], 1'b0}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (&bit_cnt)
state <= IDLE; // If last bit sent, go to idle condition
end
end
default :
begin // If we end up here, go to IDLE
bit_cnt <= 3'd0;
byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
read_pending <= 1'b0;
state <= IDLE;
end
endcase
end
endmodule

View file

@ -0,0 +1,382 @@
//----------------------------------------------------------------------------
// Module Description
//
// This module mimics the behaviour of the D3000's EPROM
// The EPROM uses a similar protocol to I2C but with a paraty check and dummy state
// State
// EPROM Protocol:
// Frame #1: 1st byte (DeviceADDRESS[7:4]+DeviceCommand[3:0])+ 1bit PAR; Datasheet only refers to a read device command (DeviceCommand)
// Frame #2: 2 byte Address: 1st byte+1-bit PAR+ 2nd byte+1-bit PAR
//
// When SDA is low, output a zero, when high, I/O cell must go to tristate, otherwise reads will not work.
// I2C busy has been used as debug signal. It is set when the module is in TX mode.
// Input clock must be at least 12x higher than I2C SCL frequency, i.e. >1.2MHz for 100kHz, >4.8MHz for 400kHz.
//
//----------------------------------------------------------------------------
// Revn Date Author Notes
//
// 2.0 26/04/2-23 DRM Modified
//
// This version contemplates reading from the slave
// Modified the need of word count. This Sleve writes and reads 1byte frames untill Master generates an NACK/STOP/ STAR event
//----------------------------------------------------------------------------
`resetall
`timescale 1ns/1ps
module i2c_slv_simple_eprom # (
parameter DEVICE_ADDRESS // 7 bit Device Address
)
(
input wire clk,
input wire lvdsoe,
input wire scl_in,
output wire scl_out,
input wire sda_in,
output wire sda_out,
output wire i2c_busy_out,
output wire [15:0] add_out,
output wire [7:0] wr_data_out,
output wire wr_en_out,
output wire rd_en_out
//input wire [7:0] rd_data_in -- No needed DATA is in EEPROM
//input wire rd_dv_in
);
// ROM init file
initial
begin
$readmemh("rom_init.mem", rom);
end
//----------------------------------------------------------------------------
// Internal Declarations
//----------------------------------------------------------------------------
// Parameters
//parameter WR_SIZE = 2'd1;
// Timing
// I2C State Machine States
localparam IDLE = 3'd0;
localparam RX_BYTE = 3'd1;
localparam PAR = 3'd2;
localparam ACK_HOLD = 3'd3;
localparam TX_BYTE = 3'd4;
localparam DUMMY = 3'd5;
localparam DATA_WIDTH = 5'd8;
localparam ADDR_WIDTH = 5'd16;
// Internal Signals
reg [2:0] scl_sr = 3'b111;
reg [2:0] sda_sr = 3'b111;
wire scl_re;
wire scl_fe;
wire scl_hi;
wire sda_re;
wire sda_fe;
wire start;
wire stop;
wire [7:0] add_rom;
reg [2:0] bit_cnt = 3'd0;
//reg [1:0] byte_cnt = 2'd0;
reg sda = 1'b1;
reg scl = 1'b1;
reg read_pending = 1'b0;
//reg rnw = 1'b0;
reg data_pkg = 1'b0;
reg rd_dv_in = 1'b0;
reg [2:0] next_state = RX_BYTE;
reg par_bit = 1'b1;
reg [2:0] state = IDLE;
reg [15:0] add = 16'd0;
reg [7:0] wr_data = 8'd0;
reg wr_en = 1'b0;
reg i2c_busy = 1'b0;
reg frame_start = 1'b0;
reg address_pkg = 1'b0;
reg [2:0] address_frame = 3'd0;
reg [7:0] data_frame = 8'd0;
reg [DATA_WIDTH-1:0] rom [255:0];
//reg [ADDR_WIDTH-1:0] add_rom;
reg [DATA_WIDTH-1:0] q_a, rd_data_in;
//----------------------------------------------------------------------------
// Output assignments
//----------------------------------------------------------------------------
assign scl_out = scl;
assign sda_out = sda;
assign i2c_busy_out = i2c_busy;
assign add_out = add;
assign wr_data_out = wr_data;
assign wr_en_out = wr_en;
assign rd_en_out = (state == TX_BYTE);
//----------------------------------------------------------------------------
// Input detection
//----------------------------------------------------------------------------
always @(posedge clk)
begin
scl_sr <= {scl_sr[1:0], scl_in};
sda_sr <= {sda_sr[1:0], sda_in};
end
assign scl_re = (scl_sr[2:1] == 2'b01);
assign scl_fe = (scl_sr[2:1] == 2'b10);
assign scl_hi = (scl_sr[2:1] == 2'b11);
assign sda_re = (sda_sr[2:1] == 2'b01);
assign sda_fe = (sda_sr[2:1] == 2'b10);
assign start = sda_fe & scl_hi & lvdsoe;
assign stop = sda_re & scl_hi;
assign add_rom = (add == 16'hB121 ? 16'h000D : (add[7:0] + data_frame));
//----------------------------------------------------------------------------
// I2C state machine
//----------------------------------------------------------------------------
reg [7:0] rd_byte = 8'd0;
reg [7:0] rd_data = 8'd0;
//----------------------------------------------------------------------------
// I2C Slave State Machine
//----------------------------------------------------------------------------
always @(posedge clk)
begin
case (state)
IDLE:
begin
bit_cnt <= 3'd0;
//byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
wr_en <= 1'b0;
read_pending <= 1'b0;
i2c_busy <= 1'b0;
frame_start <= 1'b0;
wr_data <= 7'd0;
rd_byte <= 8'd0;
data_pkg <= 1'b0;
add <= 16'd0;
par_bit <= 1'b1;
if (start)
begin
state <= RX_BYTE;
frame_start <= 1'b1;
end
end
RX_BYTE :
begin
wr_en <= 1'b0;
if (stop)
begin
state <= IDLE;
end
else if (scl_re)
begin
rd_byte <= {rd_byte[6:0], sda_in}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (&bit_cnt)
begin
state <= PAR;
bit_cnt <= 3'd0;
end
end
end
PAR: // changed it to scl_re to account for the PAR bit
begin
if (stop || start) // After a write frame. Master can start a new transaction by either stop or start event
begin
state <= IDLE;
end
else if (scl_re)
begin
if ((rd_byte[7:0] == DEVICE_ADDRESS) & (frame_start == 1'b1)) //PAR bit is not checked
begin
// Assert so I/O control passes
i2c_busy <= 1'b0;
frame_start <= 1'b0;
address_pkg <= 1'b1;
address_frame <= 3'd0;
data_frame <= 8'd0;
state <= RX_BYTE;
add <= 16'd0;
//rnw <= rd_byte[0];
end
if ((rd_byte[7:0] != DEVICE_ADDRESS) & (frame_start==1'b1))
state <= IDLE; // If not for us, ignore
// Otherwise respon
if (address_pkg)
begin
if (address_frame == 2'd1 )
begin
address_frame <= 2'd0;
address_pkg <= 1'b0;
data_pkg <= 1'b1;
data_frame <= 8'd0;
//add_rom <= 16'h0000;
next_state <= ACK_HOLD;
add <={add[7:0],rd_byte};
end
else
begin
address_frame <= address_frame + 2'd1;
state <= RX_BYTE;
add <={add[7:0],rd_byte};
end
end
end
if(scl_fe & data_pkg)
begin
state <= DUMMY;
rd_data <= q_a;
data_frame <= data_frame + 8'd1;
par_bit <= 1'b1;
sda <= 1'b1;
end
end
DUMMY:
begin
if(stop)
begin
state <= IDLE;
end
if (scl_fe)
begin
state <= next_state;
next_state <= TX_BYTE;
sda <= 1'b0;
end
end
ACK_HOLD:
begin
if (stop || start)
begin
state <= IDLE;
// Clear write enable
end
//data_pkg <= 1'b0;
if (data_pkg & frame_start == 1'b0) // If it is a write frame load register wr_data and generate a dv wr signal
begin
wr_data <= rd_byte;
wr_en <= 1'b1; // Clear write enable
end
else wr_en <= 1'b0;
//if (rd_dv_in)
//begin
//read_pending <= 1'b0;
//rd_data <= rd_data_in;
//end
if (scl_fe)
begin
bit_cnt <= 3'd0;
sda <= 1'b1; // On next falling edge, deassert SDA
scl <= 1'b1; // If we're waiting for a read, keep SCL low
state <= next_state;
end
else sda <= 1'b0;
end
TX_BYTE:
begin
if (stop || start)
begin
state <= IDLE;
end
i2c_busy <= 1'b1;
sda <= rd_data[7];
scl <= 1'b1;
if (scl_re & rd_data[7]) par_bit <= ~par_bit;
if (scl_fe)
begin
// Increment bit counter
rd_data <= {rd_data[6:0], 1'b0};
bit_cnt <= bit_cnt + 3'd1;
if (&bit_cnt) // Do not change sda in order to keep it fix
begin
state <= PAR;
next_state <= TX_BYTE;
bit_cnt <= 3'd0;
par_bit <= 1'b1;
if (par_bit) sda <= 1'b1;
else sda <= 1'b0;
end
end
end
default:
begin // If we end up here, go to IDLE
bit_cnt <= 3'd0;
//byte_cnt <= 2'd0;
//sda <= 1'b1;
scl <= 1'b1;
read_pending <= 1'b0;
state <= IDLE;
wr_en <= 1'b0;
end
endcase
end
always @ (posedge clk)
begin
q_a <= rom[add_rom];
end
endmodule

View file

@ -0,0 +1,342 @@
//----------------------------------------------------------------------------
// Module Description
//
// This is a simple I2C slave, with device address fixed at instantiation.
// Data format is 2-Byte Address, 1-Byte data on writes.
//
//
//
// When SDA is low, output a zero, when high, I/O cell must go to tristate, otherwise reads will not work.
//
// Input clock must be at least 12x higher than I2C SCL frequency, i.e. >1.2MHz for 100kHz, >4.8MHz for 400kHz.
//----------------------------------------------------------------------------
// Revision Date Author Notes
//
// 1.0 14-8-2015 GJL First Written
//
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
// Revision Date Author Notes
//
// 2.0 20-9-2020 DRM Modified
//
// This version contemplates reading from the slave
// Modified the need of word count. This Sleve writes and reads 1byte frames untill Master generates an NACK/STOP/ STAR event
//----------------------------------------------------------------------------
`resetall
`timescale 1ns/1ps
module i2c_slv_simple_tmp275 # (
parameter DEVICE_ADDRESS // 7 bit Device Address
)
(
input wire clk,
input wire scl_in,
output wire scl_out,
input wire sda_in,
output wire sda_out,
output wire i2c_busy_out,
output wire [15:0] add_out,
output wire [7:0] wr_data_out,
output wire wr_en_out,
output wire rd_en_out,
input wire [7:0] rd_data_in,
input wire rd_dv_in
);
//----------------------------------------------------------------------------
// Internal Declarations
//----------------------------------------------------------------------------
// Parameters
//parameter WR_SIZE = 2'd1;
// Timing
// I2C State Machine States
localparam IDLE = 3'd0;
localparam RX_BYTE = 3'd1;
localparam SLV_ACK = 3'd2;
localparam ACK_HOLD = 3'd3;
localparam TX_BYTE = 3'd4;
localparam MAS_ACK = 3'd5;
// Internal Signals
reg [2:0] scl_sr = 3'b111;
reg [2:0] sda_sr = 3'b111;
wire scl_re;
wire scl_fe;
wire scl_hi;
wire sda_re;
wire sda_fe;
wire start;
wire stop;
reg [2:0] bit_cnt = 3'd0;
//reg [1:0] //byte_cnt = 2'd0;
reg sda = 1'b1;
reg scl = 1'b1;
reg read_pending = 1'b0;
//reg rnw = 1'b0;
reg data_pkg = 1'b0;
reg [2:0] next_state = RX_BYTE;
reg [2:0] state = IDLE;
reg [15:0] add = 16'd0;
reg [7:0] wr_data = 8'd0;
reg wr_en = 1'b0;
reg i2c_busy = 1'b0;
reg frame_start = 1'b0;
//----------------------------------------------------------------------------
// Output assignments
//----------------------------------------------------------------------------
assign scl_out = scl;
assign sda_out = sda;
assign i2c_busy_out = i2c_busy;
assign add_out = add;
assign wr_data_out = wr_data;
assign wr_en_out = wr_en;
assign rd_en_out = read_pending;
//----------------------------------------------------------------------------
// Input detection
//----------------------------------------------------------------------------
always @(posedge clk)
begin
scl_sr <= {scl_sr[1:0], scl_in};
sda_sr <= {sda_sr[1:0], sda_in};
end
assign scl_re = (scl_sr[2:1] == 2'b01);
assign scl_fe = (scl_sr[2:1] == 2'b10);
assign scl_hi = (scl_sr[2:1] == 2'b11);
assign sda_re = (sda_sr[2:1] == 2'b01);
assign sda_fe = (sda_sr[2:1] == 2'b10);
assign start = sda_fe & scl_hi;
assign stop = sda_re & scl_hi;
//----------------------------------------------------------------------------
// I2C state machine
//----------------------------------------------------------------------------
reg [7:0] rd_byte = 8'd0;
reg [7:0] rd_data = 8'd0;
//----------------------------------------------------------------------------
// I2C Slave State Machine
//----------------------------------------------------------------------------
always @(posedge clk)
begin
case (state)
IDLE:
begin
bit_cnt <= 3'd0;
//byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
wr_en <= 1'b0;
read_pending <= 1'b0;
i2c_busy <= 1'b0;
frame_start <= 1'b0;
wr_data <= 7'd0;
if (start)
begin
state <= RX_BYTE;
frame_start <=1'b1;
end
end
RX_BYTE :
begin
wr_en <= 1'b0;
if (stop)
begin
state <= IDLE;
end
else if (scl_re)
begin
rd_byte <= {rd_byte[6:0], sda_in}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1; // Increment bit counter
if (&bit_cnt)
begin
state <= SLV_ACK; // If last bit, go to Slave Acknowledge state
end
end
end
SLV_ACK:
begin
if (stop || start) // After a write frame. Master can start a new transacion by either stop or start event
begin
state <= IDLE;
end
else if (scl_fe)
begin
if ((rd_byte[7:1] == DEVICE_ADDRESS) & (frame_start==1'b1))
begin
i2c_busy <= 1'b1; // Assert so I/O control passes this through
frame_start <= 1'b0;
////rnw <= rd_byte[0];
end
if ((rd_byte[7:1] != DEVICE_ADDRESS) & (frame_start==1'b1) )
state <= IDLE; // If not for us, ignore
else
state <= ACK_HOLD; // Otherwise respond
if (rd_byte[0] & frame_start == 1'b1) //Master Read signal
begin
next_state <= TX_BYTE;
read_pending <= 1'b1;
wr_en <= 1'b0;
end
else
begin
next_state <= RX_BYTE;
read_pending <= 1'b0;
if (frame_start)
data_pkg <= 1'b0;
else
data_pkg <= 1'b1;
end
sda <= 1'b0; // Send ACK once line is clear
end
end
ACK_HOLD:
begin
if (stop || start)
begin
state <= IDLE;
// Clear write enable
end
data_pkg <= 1'b0;
if (data_pkg & frame_start == 1'b0) // If it is a write frame load register wr_data and generate a dv wr signal
begin
wr_data <= rd_byte;
wr_en <= 1'b1; // Clear write enable
end
else wr_en <= 1'b0;
if (rd_dv_in)
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
if (scl_fe)
begin
bit_cnt <= 3'd0;
sda <= 1'b1; // On next falling edge, deassert SDA
scl <= ~read_pending; // If we're waiting for a read, keep SCL low
state <= next_state;
end
end
TX_BYTE:
begin
if (stop || start)
begin
state <= IDLE;
end
if (rd_dv_in) //These part of the code contemplates clock streching
begin
read_pending <= 1'b0;
rd_data <= rd_data_in;
end
// Keep SCL low until read is complete
sda <= rd_data[7];
scl <= ~read_pending;
if (scl_fe)
begin
// Increment bit counter
rd_data <= {rd_data[6:0], 1'b0}; // Read in next bit
bit_cnt <= bit_cnt + 3'd1;
if (&bit_cnt)
begin
state <= MAS_ACK;
next_state <= ACK_HOLD;
end
end
end
MAS_ACK: // At this point a STOP/NACK or master ACK can happen.
begin
if(stop)
begin
state <= IDLE;
end
sda <= 1'b1;
scl <= 1'b1;
if (scl_re & sda_in == 1'b0)
begin
read_pending <= 1'b1;
state <= next_state;
next_state <= TX_BYTE;
end
if (scl_re & sda_in == 1'b1) //NACK
begin
read_pending <= 1'b0;
state <= next_state;
end
end
default :
begin // If we end up here, go to IDLE
bit_cnt <= 3'd0;
////byte_cnt <= 2'd0;
sda <= 1'b1;
scl <= 1'b1;
read_pending <= 1'b0;
state <= IDLE;
wr_en <= 1'b0;
end
endcase
end
endmodule

View file

@ -0,0 +1,276 @@
/*
Module description
Control block of mcp4631 (digital potentiometer)
@author David Rodriguez
@copyright (c) 2020 Global Inkjet Systems
@date 2023-01-04
*/
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pei_register_pkg.all;
--add_out has been elminated. The I2C interface decodes write and read frame
entity stm8 is
/* GENERIC(
--Paramaters for the debugger
ADDRESS_STM8 : integer range 0 to 255 :=0
); */
PORT(
clk : in std_logic;
rst_n : in std_logic;
scl_in : in std_logic;
scl_out : out std_logic;
sda_in : in std_logic;
sda_out : out std_logic;
start_w_i2c : in std_logic;
start_r_i2c : in std_logic;
i2c_master_rd_dv : out std_logic;
i2c_stm8_busy : out std_logic;
wr_flag : out std_logic;
rd_flag : out std_logic;
i2c_address_stm8 : in std_logic_vector(7 downto 0);
reg_stm8_in : in std_logic_vector(15 downto 0);
wr_nbytes : in std_logic_vector(15 downto 0);
reg_stm8_out : out std_logic_vector(15 downto 0)
);
end entity stm8;
architecture struct of stm8 is
component simple_i2c_masterPEI
generic ( CLOCK_DIVIDER : std_logic_vector(9 downto 0));
port (
clk : IN std_logic;
scl_in : IN std_logic;
scl_out : OUT std_logic;
sda_in : IN std_logic;
sda_out : OUT std_logic;
cmd_wr_cnt_in : IN std_logic_vector(7 downto 0);
cmd_rd_cnt_in : IN std_logic_vector(7 downto 0);
wr_data_in : IN std_logic_vector(7 downto 0);
wr_dv_in : IN std_logic;
rdy_for_data_out : OUT std_logic;
rdy_for_cmd_out : OUT std_logic;
dv_out : OUT std_logic;
rd_data_out : OUT std_logic_vector(7 downto 0);
error : OUT std_logic
);
end component;
type i2c_state_machine is (IDLE, FRAME_DATA_W, FRAME_DATA_R, WAIT_STOP);
signal I2c_master_sate : i2c_state_machine;
signal sda_d1, sda_d2 : std_logic;
signal i2c_stop : std_logic;
signal wr_i2c_stm8 : std_logic;
signal tx_dv : std_logic;
signal dv_out : std_logic;
signal rd_cmd : std_logic;
signal i2c_error : std_logic;
signal frame_cnt_w : std_logic_vector(7 downto 0);
signal frame_cnt_r : std_logic_vector(7 downto 0);
signal wr_data_in : std_logic_vector(7 downto 0);
signal rd_i2c_data : std_logic_vector(7 downto 0);
signal count_frame : std_logic_vector(7 downto 0);
signal reg_stm8_int : std_logic_vector(15 downto 0);
signal rd_flag_int, wr_flag_int : std_logic;
begin
--ADD generic I2C address
rd_flag <= rd_flag_int;
wr_flag <= wr_flag_int;
i2c_masterPEI_inst : simple_i2c_masterPEI
generic map
(
-- CLK_FREQ_HZ => CLK_FREQ_MHZ * 1000000,
--BUS_FREQ_HZ => I2C_FREQ_KHZ * 1000
CLOCK_DIVIDER => std_logic_vector(to_unsigned(500,10))
)
port map
(
clk => clk,
--rst_n => rst_n,
scl_in => scl_in,
scl_out => scl_out,
sda_in => sda_in,
sda_out => sda_out,
cmd_wr_cnt_in => frame_cnt_w, -- write frameAddress+command+data. std_logic_vector(to_unsigned(3,8))
cmd_rd_cnt_in => frame_cnt_r, -- the read frame is fixed to i2caddress+2xdataframe.
wr_data_in => wr_data_in, -- data to be written.
wr_dv_in => wr_i2c_stm8, -- change state from Idle to Start.
rdy_for_data_out => tx_dv, -- It goes high during the SLV_ACK, indicates the end of the transaction.
rdy_for_cmd_out => rd_cmd, -- Flag showing I2C is idle state. Master is in Idle state when this flag is high.
dv_out => dv_out, -- rd_dv ready data valid.
rd_data_out => rd_i2c_data, -- data out.
error => i2c_error -- i2c error.
);
-- the process below implement the stm8 protocol:
-- write: ADDRESS[W]+OFFSET_CMD+DAT[0]...+DATA[n]
-- read: Two transactions: 1st -> ADDRESS[W]+OFFSET_CMD; 2nd -> ADDRESS[R]+DATA[0]+DATA[1]
I2C_process: process(clk, rst_n)
begin
if (rst_n='0' or i2c_error='1') then
rd_flag_int <='0';
wr_flag_int <='0';
wr_data_in <= (others => '0');
I2c_master_sate <= IDLE;
wr_i2c_stm8 <= '0';
count_frame <= (others => '0');
i2c_master_rd_dv <= '0';
i2c_stm8_busy <= '0';
reg_stm8_out <= (others => '0');
reg_stm8_int <= (others => '0');
frame_cnt_w <= (others => '0');
elsif (clk'event and clk='1') then
case I2c_master_sate is
when IDLE =>
rd_flag_int <='0';
wr_flag_int <='0';
count_frame <= (others => '0');
i2c_stm8_busy <= '0';
i2c_master_rd_dv <= '0';
reg_stm8_out <= (others => '0');
if (start_w_i2c = '1' and rd_cmd = '1') then
I2c_master_sate <= FRAME_DATA_W;
--wr_data_in <= std_logic_vector(to_unsigned(ADDRESS_STM8,8));
wr_data_in <= i2c_address_stm8;
wr_i2c_stm8 <='1';
reg_stm8_int <= reg_stm8_in;
frame_cnt_w <= std_logic_vector(unsigned(wr_nbytes(7 downto 0))+1); --Number of write frames of 8-bit
i2c_stm8_busy <= '1';
elsif (start_r_i2c = '1' and rd_cmd = '1') then
I2c_master_sate <= FRAME_DATA_R;
--wr_data_in <= std_logic_vector(to_unsigned((ADDRESS_STM8+1),8)); -- turn bit0 into 1 for a read
wr_data_in <=i2c_address_stm8(7 downto 1) & '1';
wr_i2c_stm8 <='1';
frame_cnt_r <= std_logic_vector(to_unsigned(3,8)); --Number of read frames of 8-bit
i2c_stm8_busy <= '1';
else
I2c_master_sate <= IDLE;
wr_i2c_stm8 <='0';
end if;
when FRAME_DATA_W => --ONLY 2 data frames. The STOP condition should stop
wr_flag_int <='1';
wr_i2c_stm8 <= '0';
if (i2c_stop = '1'and dv_out='0') then
I2c_master_sate <= IDLE;
else
I2c_master_sate <= FRAME_DATA_W;
end if;
if (tx_dv='1') then
count_frame <= std_logic_vector(unsigned(count_frame)+1);
if (unsigned(count_frame)= unsigned(wr_nbytes)) then
I2c_master_sate <= WAIT_STOP;
else
I2c_master_sate <= FRAME_DATA_W;
--reg_stm8_int(15 downto 8) <= reg_stm8_int(7 downto 0);
wr_data_in <= reg_stm8_int (7 downto 0); --MSB first
reg_stm8_int(7 downto 0) <= reg_stm8_int (15 downto 8);
end if;
end if;
when FRAME_DATA_R =>
rd_flag_int <='1';
wr_i2c_stm8 <='0';
i2c_stm8_busy <= '1';
if (i2c_stop = '1' and dv_out='0')then
I2c_master_sate <= IDLE;
else
I2c_master_sate <= FRAME_DATA_R;
end if;
if (dv_out='1') then
count_frame <= std_logic_vector(unsigned(count_frame)+1);
if (unsigned(count_frame) = 1) then -- the frame does not include the TX of the address
I2c_master_sate <= WAIT_STOP;
i2c_master_rd_dv <='1';
end if;
I2c_master_sate <= FRAME_DATA_R;
reg_stm8_out(7 downto 0) <= rd_i2c_data; --MSB first
reg_stm8_out(15 downto 8) <= reg_stm8_out(7 downto 0);
--end if;
end if;
when WAIT_STOP =>
wr_i2c_stm8 <= '0';
i2c_stm8_busy <= '1';
if (i2c_stop = '1') then
I2c_master_sate <= IDLE;
reg_stm8_int <= (others => '0');
else
I2c_master_sate <= WAIT_STOP;
end if;
when others =>
wr_i2c_stm8 <= '0';
i2c_master_rd_dv <='0';
i2c_stm8_busy <= '0';
end case;
end if;
end process;
i2c_stop_p: process(clk, rst_n)--detects stop condition
begin
if (rst_n = '0') then
i2c_stop <= '0';
elsif (clk'event and clk='1') then
sda_d1 <= sda_out;
sda_d2 <= sda_d1;
i2c_stop <= '0';
if (sda_d2 = '0' and sda_d1 = '1' and scl_out='1') then
i2c_stop <= '1';
end if;
end if;
end process;
--add re-start condition
end architecture struct;

View file

@ -1,8 +1,9 @@
[{
"ip_name" : "print_ctrl",
"bus" : "csr",
"addr_hi_bit" : "9",
"addr_lo_bit" : "6",
"addr_hi_bit" : "10",
"addr_lo_bit" : "7",
"addr_width" : "5",
"description" : "This block is the print controller for the GMA SOM board soft IP",
"notes" : "The print_ctrl block contains local registers for CPU access to status, and for CPU control and instigation of function, some of which is just for the purposes of test and debug. The CSR_PRINT_CTRL_SEQ_STATUS register has six fields of 4 bits each (for each of the four heads) with bits for the wave and print data sequence busy statuses, and for the data core empty statuses (i.e. no data in the pixel buffer). In addition, there are three error cases for over- and under-runs and double 'droppy' detetction. The CSR_PRINT_CTRL_CONTROL register provides the ability for the CPU to configure the print system. The CHAN_EN field is a master enable for the data core, and the BPP_MODE sets the bits-per-pixel, with valid values for GMA of 1, 2 or 3. The system supports both the GMA3305300 and the GMA9905300, and the DATA_WIDTH field setting configures the mode by specifying either 6 or 18 (for the GMA3305300 and the GMA9905300 respectively). The block is designed to be generic so all values from 1 to 18 are supported, but no product can yet utilise other values. Some test and debug features are provided in the registers, with the CPU_GL_MAP bit of the CSR_PRINT_CTRL_CONTROL register enabling the overriding of the GL map value of the logic, with the values set in the CSR_PRINT_CTRL_CPU_GL_MAP register. This register has four fields of 8 bits---one for each head. In addition, the CPU can instigate a wave sequence start by writing a 1 to the CSR_PRINT_CTRL_CPU_WAVE_SEQ_START register. The sequence start addresses are specified in the 4 registers CSR_PRINT_CTRL_CPU_WAVE_SEQ_ADDRx, where x is 0 to 3. The instigation of a start request to the data core can also be controlled from the CPU by writing a 1 to the CSR_PRINT_CTRL_CPU_DATA_START register. Required delays can be specified in the CSR_PRINT_CTRL_CPU_START_DLY register, with 4 fields of 8 bits---one for each head. The delay is limited to 8 bits, even though the delay queue has more (currently 10 bits), but the full range is not felt to be a test or debug requirement. Data can also be pushed into the pixel buffers from the CPU by setting the CPU_PX_SEL field of the CSR_PRINT_CTRL_CONTROL to select which buffer to update, and then writing to the CSR_PRINT_CTRL_CPU_PUSH_PX_BUF for each word. Note that it is important to have set the BPP mode to be used before attempting to write to the pixel buffer from the CPU as the correct unpacking of data is a function of this.",
"sub_blocks" : {
@ -14,27 +15,27 @@
"print_unit:b" : {
"instance" : "1",
"process" : "enabled",
"offset" : "0x040"
"offset" : "0x080"
},
"print_unit:c" : {
"instance" : "2",
"process" : "enabled",
"offset" : "0x080"
"offset" : "0x100"
},
"print_unit:d" : {
"instance" : "3",
"process" : "enabled",
"offset" : "0x0c0"
"offset" : "0x180"
},
"local" : {
"instance" : "",
"process" : "enabled",
"offset" : "0x100"
"offset" : "0x200"
},
"print_streamer" : {
"instance" : "",
"process" : "enabled",
"offset" : "0x140"
"offset" : "0x280"
}
},
"registers" : {
@ -54,7 +55,7 @@
"bit_len" : "8",
"reset" : "0x04",
"description" : "Manufacturer number"
},
"reserved" : {
"type" : "rsv",
@ -63,7 +64,7 @@
}
}
},
"ip_ver" : {
"address" : "1",
"width" : "32",
@ -80,7 +81,7 @@
"bit_len" : "8",
"reset" : "0x00",
"description" : "Major number"
},
"reserved" : {
"type" : "rsv",
@ -126,7 +127,7 @@
},
"seq_status" : {
"address" : "7",
"width" : "28",
"width" : "32",
"description" : "Print unit sequencer statuses",
"fields" : {
"wave_seq_busy" : {
@ -170,12 +171,18 @@
"bit_len" : "4",
"reset" : "0x00",
"description" : "Print unit data core double 'droppy' error condition detected"
},
"overlap_error" : {
"type" : "r",
"bit_len" : "4",
"reset" : "0x00",
"description" : "Print unit data core merge overlap error condition detected"
}
}
},
"control" : {
"address" : "8",
"width" : "29",
"width" : "30",
"description" : "Data core control register",
"fields" : {
"chan_en" : {
@ -237,6 +244,12 @@
"reset" : "0",
"description" : "Enable power-up/down from CPU for test"
},
"en_dual_data_path" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "Enable PD inline merge dual data paths, if supported"
},
"cpu_adc_meas" : {
"type" : "w0",
"bit_len" : "1",
@ -339,7 +352,7 @@
"last" : {
"type" : "w",
"bit_len" : "4",
"reset" : "0x0",
"reset" : "0xf",
"description" : "Sets a flag indicating CPU start pulse is the first in a (potentially) multi-wave sequence."
}
}
@ -353,10 +366,29 @@
},
"cpu_fire_req" : {
"address" : "13",
"width" : "8",
"type" : "wp",
"reset" : "0",
"description" : "Send a fire request with the written fire request data"
"width" : "13",
"description" : "Send a fire request with the written fire request data",
"fields" : {
"start_merge" : {
"type" : "wp",
"bit_len" : "1",
"reset" : "0",
"description" : "Mark fire request as a start_merge request"
},
"mask" : {
"type" : "wp",
"bit_len" : "4",
"reset" : "0",
"description" : "Mask fire requests to heads (1 = disable)"
},
"seq_addr" : {
"type" : "wp",
"bit_len" : "8",
"reset" : "0",
"description" : "Address for Print Sequencer to Start At"
}
}
},
"dac_0v_value" : {
"address" : "14",
@ -395,9 +427,160 @@
"description" : "Data core BPP mode control for head0"
}
}
},
"cpu_start_seq" : {
"address" : "16",
"width" : "12",
"description" : "Start print unit sequencers under CPU control",
"fields" : {
"go" : {
"type" : "wp",
"bit_len" : "4",
"reset" : "0",
"description" : "Go bits for individual print unit sequencers"
},
"address" : {
"type" : "wp",
"bit_len" : "8",
"reset" : "0",
"description" : "Start address for sequence"
}
}
},
"diag_nonzero" : {
"address" : "17",
"width" : "32",
"description" : "Diagnostic to detect printing ones",
"fields" : {
"head0" : {
"type" : "r",
"bit_len" : "7",
"reset" : "0",
"description" : "Number of Non-Zero pixels. Holds at 127 max until cleared"
},
"head1" : {
"type" : "r",
"bit_len" : "7",
"reset" : "0",
"description" : "Number of Non-Zero pixels. Holds at 127 max until cleared"
},
"head2" : {
"type" : "r",
"bit_len" : "7",
"reset" : "0",
"description" : "Number of Non-Zero pixels. Holds at 127 max until cleared"
},
"head3" : {
"type" : "r",
"bit_len" : "7",
"reset" : "0",
"description" : "Number of Non-Zero pixels. Holds at 127 max until cleared"
},
"clr" : {
"type" : "w0",
"bit_len" : "4",
"reset" : "0",
"description" : "Clear non zero bits"
}
}
},
"debug_wr_if_ctrl" : {
"address" : "18",
"width" : "6",
"description" : "Memory write interface control",
"fields": {
"enable" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "Enable Operation"
},
"clr" : {
"type" : "w0",
"bit_len" : "1",
"reset" : "0",
"description" : "Clear interface"
},
"update_addr" : {
"type" : "w0",
"bit_len" : "1",
"reset" : "0",
"description" : "Update DMA addresses"
},
"smpl_wr_addr" : {
"type" : "w0",
"bit_len" : "1",
"reset" : "0",
"description" : "Sample DMA write address"
},
"trig_underrun" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "When set, the event logger will stop when an underrun is detected. The triggered bit will be set"
},
"trig_dbl_drop" : {
"type" : "w",
"bit_len" : "1",
"reset" : "0",
"description" : "When set, the event logger will stop when a double drop is detected. The triggered bit will be set"
}
}
},
"debug_wr_if_base_addr" : {
"address" : "19",
"width" : "32",
"type" : "w",
"reset" : "0x20000000",
"description" : "Byte address of DMA circular buffer base"
},
"debug_wr_if_end_addr" : {
"address" : "20",
"width" : "32",
"type" : "w",
"reset" : "0x2000ffff",
"description" : "Byte address of DMA circular buffer end"
},
"debug_wr_if_status" : {
"address" : "21",
"width" : "3",
"description" : "Memory write interface status",
"fields": {
"overflow" : {
"type" : "r",
"bit_len" : "1",
"reset" : "0",
"description" : "Overfow error (sticky). Events lost due to FIFO overflow"
},
"write_busy" : {
"type" : "r",
"bit_len" : "1",
"reset" : "0",
"description" : "Data is in transit to memory. Wait for this to be clear before reading near the write head"
},
"triggered" : {
"type" : "r",
"bit_len" : "1",
"reset" : "0",
"description" : "When 1, the event logging has stopped due to a trigger event occuring"
}
}
},
"debug_wr_if_wr_addr" : {
"address" : "22",
"width" : "32",
"type" : "r",
"reset" : "0",
"description" : "Sampled byte address of next memory write"
},
"debug_wr_if_bytes_written" : {
"address" : "23",
"width" : "32",
"type" : "r",
"reset" : "0",
"description" : "Number of bytes written since last clr. All 1's indicates greater than 4G"
}
}
},
{
"ip_name" : "print_ctrl",

View file

@ -29,16 +29,17 @@
--! @b Language build standard requirements:
--! @li VHDL 2008
--!
--! @author Simon Southwell
--! @copyright (c) 2018 Global Inkjet Systems
--! @date 2018-1-10
--! @author Dave Steele
--! @copyright (c) 2024 Global Inkjet Systems
--! @date 2024-1-29
-------------------------------------------------------------------------------
-- altera vhdl_input_version vhdl_2008
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.sg1024_pkg.all;
entity print_ctrl is
generic(
@ -48,10 +49,14 @@ entity print_ctrl is
MAX_HEADS : natural range 1 to 4 := 4;
NUM_HEADS : natural range 1 to 16 := 4;
MAX_OP_WIDTH : natural range 1 to 48 := 48;
NUM_CHANS : natural range 1 to 8 := 2;
SHIFT_DEPTH : integer range 1 to 1024 := 128;
PCLK_CLK_RATIO : integer range 1 to 32 := 8;
SLIM : boolean := true;
DYNAMIC_COMBINE : boolean := true
DYNAMIC_COMBINE : boolean := true;
NO_ZERO_GAP : boolean := true;
STREAMER_LOGGER : boolean := true;
EN_PEEK : boolean := false
);
port(
@ -59,7 +64,7 @@ entity print_ctrl is
clk_x2 : in std_logic;
rst_n : in std_logic;
avs_csr_address : in std_logic_vector(9 downto 0);
avs_csr_address : in std_logic_vector(10 downto 0);
avs_csr_write : in std_logic;
avs_csr_writedata : in std_logic_vector(31 downto 0);
avs_csr_read : in std_logic;
@ -71,13 +76,6 @@ entity print_ctrl is
avs_seq_read : in std_logic;
avs_seq_readdata : out std_logic_vector(31 downto 0);
avm_rx_waitrequest : out std_logic;
avm_rx_burstcount : in std_logic_vector(11 downto 0);
avm_rx_address : in std_logic_vector(31 downto 0);
avm_rx_read : in std_logic;
avm_rx_readdata : out std_logic_vector(31 downto 0);
avm_rx_readdatavalid : out std_logic;
--AXI write address bus
axm_awaddr : out std_logic_vector(31 downto 0);
axm_awprot : out std_logic_vector(2 downto 0);
@ -110,9 +108,19 @@ entity print_ctrl is
axm_rvalid : in std_logic; --slave data valid
axm_rready : out std_logic; --master ready to accept
fire_req : in std_logic_vector(NUM_HEADS - 1 downto 0);
-- Avalon Master burst write interface for FPGA configuration block
avm_tx_waitrequest : in std_logic;
avm_tx_burstcount : out std_logic_vector(11 downto 0) := (others => '0');
avm_tx_address : out std_logic_vector(31 downto 0) := (others => '0');
avm_tx_write : out std_logic := '0';
avm_tx_writedata : out std_logic_vector(63 downto 0) := (others => '0');
avm_tx_last : out std_logic;
fire_req : in fpm_vec_t(0 to NUM_HEADS-1);
fire_req_start_merge : in fpm_vec_t(0 to NUM_HEADS-1);
fire_data : in std_logic_vector(7 downto 0);
px_buf_ch_nactive : out std_logic_vector((NUM_HEADS*NUM_CHANS)-1 downto 0);
stm8_trigger_rx : out std_logic;
sig_seq_force_dacs_0v : in std_logic;
@ -130,12 +138,17 @@ entity print_ctrl is
en_test_fp_logic : out std_logic;
en_test_pwr_ctrl : out std_logic;
ps_wr : out std_logic;
ps_wr_data : out std_logic_vector(31 downto 0);
ps_rdy : in std_logic;
gma99 : out std_logic;
pof_rx_debug : in std_logic_vector(31 downto 0);
diag_peek_sel : in std_logic_vector( 3 downto 0);
diag_peek_addr : in std_logic_vector(31 downto 0);
diag_peek_data : out std_logic_vector(31 downto 0);
diag_peek_rdptr : out std_logic_vector( 7 downto 0);
diag_peek_wrptr : out std_logic_vector( 7 downto 0);
diag_peek_wdata : in std_logic_vector(31 downto 0);
diag_peek_wr : in std_logic;
diag_word_count_comb : out std_logic_vector(31 downto 0);
dbg_port : out std_logic_vector(7 downto 0)
@ -154,12 +167,13 @@ architecture rtl of print_ctrl is
type px_data_t is array (0 to MAX_HEADS - 1) of std_logic_vector(31 downto 0);
type bpp_vec_t is array (0 to MAX_HEADS - 1) of std_logic_vector(3 downto 0);
type diag_wc_vec_t is array (0 to MAX_HEADS - 1) of std_logic_vector(6 downto 0);
type print_vec_t is array (natural range <>) of std_logic_vector;
constant ZERO : std_logic_vector(47 downto 0) := 48x"0";
signal stm8_trigger_rx_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal wave_seq_busy : std_logic_vector(MAX_HEADS - 1 downto 0);
signal print_seq_busy : std_logic_vector(MAX_HEADS - 1 downto 0);
signal seq_dac_data : dac_vec_t;
signal seq_dac_data_int : dac_vec_t;
@ -192,54 +206,105 @@ architecture rtl of print_ctrl is
signal underrun : std_logic_vector(MAX_HEADS - 1 downto 0);
signal overrun : std_logic_vector(MAX_HEADS - 1 downto 0);
signal dbl_drop : std_logic_vector(MAX_HEADS - 1 downto 0);
signal overlap_error : std_logic_vector(MAX_HEADS-1 downto 0);
signal fp_drop : std_logic_vector(MAX_HEADS - 1 downto 0);
signal clear_buffer : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_gl_map_en : std_logic;
signal cpu_gl_map_head : remap_t;
signal cpu_start_dly_head : data_dly_t;
signal cpu_data_start : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_data_start_first : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_data_start_last : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_adc_meas : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_gl_map_en : std_logic;
signal cpu_gl_map_head : remap_t;
signal cpu_start_dly_head : data_dly_t;
signal cpu_data_start : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_data_start_first : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_data_start_last : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_adc_meas : std_logic_vector(MAX_HEADS - 1 downto 0);
signal control_cpu_px_sel : std_logic_vector(1 downto 0);
signal cpu_push_px_buf_pulse : std_logic;
signal cpu_push_px_buf : std_logic_vector(31 downto 0);
signal cpu_px_sel : std_logic_vector( 1 downto 0);
signal cpu_push_px_buf_pulse : std_logic;
signal cpu_push_px_buf : std_logic_vector(31 downto 0);
signal pixel_buf_wr_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal pixel_buf_wr_data_int : px_data_t;
signal pixel_buf_rdy : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_fire_req_mask : std_logic_vector(MAX_HEADS-1 downto 0);
signal cpu_fire_req_pulse : std_logic;
signal cpu_fire_req_start_merge : std_logic;
signal cpu_fire_req_data : std_logic_vector(7 downto 0);
signal pixel_buf_wr : std_logic_vector(MAX_HEADS - 1 downto 0);
signal cpu_start_seq_pulse : std_logic;
signal cpu_start_seq_go : std_logic_vector( 3 downto 0);
signal cpu_start_seq_address : std_logic_vector( 7 downto 0);
signal fire_req_in0 : std_logic_vector(NUM_HEADS-1 downto 0);
signal fire_req_start_merge_in0 : std_logic_vector(NUM_HEADS-1 downto 0);
signal fire_req_int : std_logic_vector(NUM_HEADS-1 downto 0);
signal fire_req_start_merge_int : std_logic_vector(NUM_HEADS-1 downto 0);
signal cpu_fire_req_start_merge_plse : std_logic;
signal fire_req_data_int : std_logic_vector( 7 downto 0);
signal print_seq_busy : std_logic_vector(MAX_HEADS-1 downto 0);
signal pixel_buf_wr_int : std_logic_vector(NUM_CHANS*MAX_HEADS - 1 downto 0);
signal pixel_buf_wr_data_int : print_vec_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal pixel_buf_rdy : std_logic_vector(NUM_CHANS*MAX_HEADS - 1 downto 0);
signal pixel_buf_last_word : std_logic;
signal pixel_buf_wr : std_logic_vector(NUM_CHANS*MAX_HEADS - 1 downto 0);
signal pixel_buf_wr_data : std_logic_vector(31 downto 0);
signal cpu_fire_req_pulse : std_logic;
signal cpu_fire_req : std_logic_vector(7 downto 0);
signal fire_req_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal fire_req_data_int : std_logic_vector(7 downto 0);
signal fire_req_edge : std_logic_vector(MAX_HEADS - 1 downto 0);
signal fire_req_dly : std_logic_vector(MAX_HEADS - 1 downto 0);
signal diag_word_count : print_vec_t(0 to MAX_HEADS-1)( 6 downto 0);
signal diag_peek_data_int : print_vec_t(0 to MAX_HEADS-1)(31 downto 0);
signal diag_peek_rdptr_int : print_vec_t(0 to MAX_HEADS-1)( 7 downto 0);
signal diag_peek_wrptr_int : print_vec_t(0 to MAX_HEADS-1)( 7 downto 0);
signal print_unit_dbg : std_logic_vector(15 downto 0);
signal dest_port_wr : std_logic_vector(MAX_HEADS downto 0);
signal dest_port_rdy : std_logic_vector(MAX_HEADS downto 0);
signal ps_debug : std_logic_vector(19 downto 0);
signal en_dual_data_path : std_logic;
signal dac_0v_value : std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
signal print_all_on_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal print_latch_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal print_clk_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal print_data_int : std_logic_vector(MAX_HEADS * MAX_OP_WIDTH - 1 downto 0);
signal print_unit_dbg : std_logic_vector(15 downto 0);
signal dest_port_wr : std_logic_vector(MAX_HEADS downto 0);
signal dest_port_rdy : std_logic_vector(MAX_HEADS downto 0);
signal ps_debug : std_logic_vector(19 downto 0);
signal diag_word_count : diag_wc_vec_t;
signal dac_0v_value : std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
signal print_all_on_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal print_latch_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal print_clk_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal print_data_int : std_logic_vector(MAX_HEADS * MAX_OP_WIDTH - 1 downto 0);
signal combine_chans : std_logic;
signal combine_chans_int : std_logic;
signal all_on_emul : std_logic_vector(3 downto 0);
--diags
signal diag_nonzero_head : diag_wc_vec_t;
signal print_clk_int_d : std_logic_vector(MAX_HEADS - 1 downto 0);
signal diag_nonzero_clr : std_logic_vector(MAX_HEADS - 1 downto 0);
signal diag_nonzero_inc : std_logic_vector(MAX_HEADS - 1 downto 0);
signal debug_wr_if_ctrl_enable : std_logic;
signal debug_wr_if_ctrl_clr : std_logic;
signal debug_wr_if_ctrl_update_addr : std_logic;
signal debug_wr_if_ctrl_trig_underrun: std_logic;
signal debug_wr_if_ctrl_trig_dbl_drop: std_logic;
signal debug_wr_if_base_addr : std_logic_vector(31 downto 0);
signal debug_wr_if_end_addr : std_logic_vector(31 downto 0);
signal debug_wr_if_bytes_written : std_logic_vector(31 downto 0);
signal debug_wr_if_status_overflow : std_logic;
signal debug_wr_if_status_triggered : std_logic;
signal debug_wr_if_status_write_busy : std_logic;
signal debug_wr_if_ctrl_smpl_wr_addr : std_logic;
signal debug_wr_if_wr_addr : std_logic_vector(31 downto 0);
signal combine_chans : std_logic;
signal combine_chans_int : std_logic;
signal all_on_emul : std_logic_vector(3 downto 0);
begin
process (all)
begin
for i in 0 to NUM_HEADS-1 loop
fire_req_in0(i) <= fire_req(i)(0);
fire_req_start_merge_in0(i) <= fire_req_start_merge(i)(0);
end loop;
end process;
fire_req_int <= (others => '1') when cpu_fire_req_pulse = '1' else fire_req_in0;
fire_req_start_merge_int <= (others => '1') when cpu_fire_req_start_merge_plse = '1' else fire_req_start_merge_in0;
fire_req_data_int <= fire_data when unsigned(fire_req_in0) /= 0 else cpu_fire_req_data;
cpu_fire_req_start_merge_plse <= cpu_fire_req_start_merge and cpu_fire_req_pulse;
GEN_TIE_OFF_REQD : if MAX_HEADS > NUM_HEADS generate
GEN_TIE_OFF : for i in NUM_HEADS to MAX_HEADS - 1 generate
avs_seq_readdata_int(i) <= (others => '0');
@ -254,18 +319,6 @@ begin
combine_chans_int <= combine_chans;
end generate;
-- Convert input fire request to a pulse on the falling egde
process(clk, rst_n) is
begin
if rst_n = '0' then
fire_req_dly(NUM_HEADS - 1 downto 0) <= (others => '0');
elsif clk'event and clk = '1' then
fire_req_dly(NUM_HEADS - 1 downto 0) <= fire_req;
end if;
end process;
-- Pulse at falling edge
fire_req_edge(NUM_HEADS - 1 downto 0) <= fire_req_dly(NUM_HEADS - 1 downto 0) and not fire_req;
-- STM8 trigger whenever any print unit outputs trigger
stm8_trigger_rx <= '1' when to_integer(unsigned(stm8_trigger_rx_int)) /= 0 else '0';
@ -278,8 +331,8 @@ begin
-- Decode the CSR access for each print unit controller
print_ctrl_csr_decode_inst : entity work.print_ctrl_csr_decode
generic map(
ADDR_DECODE_HI_BIT => 9,
ADDR_DECODE_LO_BIT => 6
ADDR_DECODE_HI_BIT => 10,
ADDR_DECODE_LO_BIT => 7
)
port map(
print_unit_0_write => avs_csr_write_int(0),
@ -301,7 +354,7 @@ begin
local_read => local_read,
local_readdata => local_readdata,
avs_address => avs_csr_address(9 downto 6),
avs_address => avs_csr_address(10 downto 7),
avs_write => avs_csr_write,
avs_read => avs_csr_read,
avs_readdata => avs_csr_readdata
@ -333,10 +386,13 @@ begin
avs_readdata => avs_seq_readdata
);
-- -----------------------------------------------
-- Local register block for print_ctrl
-- -----------------------------------------------
print_ctrl_csr_regs_inst : entity work.print_ctrl_csr_regs
generic map(
ADDR_DECODE_WIDTH => 4
ADDR_DECODE_WIDTH => 5
)
port map(
clk => clk,
@ -351,12 +407,13 @@ begin
control_chan_en => chan_en,
control_data_width => print_data_width,
control_cpu_gl_map => cpu_gl_map_en,
control_cpu_px_sel => control_cpu_px_sel,
control_cpu_px_sel => cpu_px_sel,
control_head_data_map_rev => head_data_map_rev,
control_fpm_select_pof_niso => fpm_select_pof_niso,
control_en_test_fp_logic => en_test_fp_logic,
control_en_test_pwr_ctrl => en_test_pwr_ctrl,
control_clear_px_buf => clear_buffer,
control_en_dual_data_path => en_dual_data_path,
control_cpu_adc_meas => cpu_adc_meas(0),
control_combine_chans => combine_chans,
control_all_on_emul => all_on_emul,
@ -384,27 +441,97 @@ begin
cpu_push_px_buf_in => (others => '0'),
cpu_fire_req_pulse => cpu_fire_req_pulse,
cpu_fire_req => cpu_fire_req,
cpu_fire_req_in => (others => '0'),
cpu_fire_req_start_merge => cpu_fire_req_start_merge,
cpu_fire_req_start_merge_in => '0',
cpu_fire_req_mask => cpu_fire_req_mask,
cpu_fire_req_mask_in => (others => '0'),
cpu_fire_req_seq_addr => cpu_fire_req_data,
cpu_fire_req_seq_addr_in => (others => '0'),
cpu_start_seq_pulse => cpu_start_seq_pulse,
cpu_start_seq_go => cpu_start_seq_go,
cpu_start_seq_go_in => (others => '0'),
cpu_start_seq_address => cpu_start_seq_address,
cpu_start_seq_address_in => (others => '0'),
diag_nonzero_head0 => diag_nonzero_head(0),
diag_nonzero_head1 => diag_nonzero_head(1),
diag_nonzero_head2 => diag_nonzero_head(2),
diag_nonzero_head3 => diag_nonzero_head(3),
diag_nonzero_clr => diag_nonzero_clr,
debug_wr_if_ctrl_enable => debug_wr_if_ctrl_enable,
debug_wr_if_ctrl_clr => debug_wr_if_ctrl_clr,
debug_wr_if_ctrl_update_addr => debug_wr_if_ctrl_update_addr,
debug_wr_if_ctrl_trig_underrun=> debug_wr_if_ctrl_trig_underrun,
debug_wr_if_ctrl_trig_dbl_drop=> debug_wr_if_ctrl_trig_dbl_drop,
debug_wr_if_base_addr => debug_wr_if_base_addr,
debug_wr_if_end_addr => debug_wr_if_end_addr,
debug_wr_if_bytes_written => debug_wr_if_bytes_written,
debug_wr_if_status_overflow => debug_wr_if_status_overflow,
debug_wr_if_status_write_busy => debug_wr_if_status_write_busy,
debug_wr_if_status_triggered => debug_wr_if_status_triggered,
debug_wr_if_ctrl_smpl_wr_addr => debug_wr_if_ctrl_smpl_wr_addr,
debug_wr_if_wr_addr => debug_wr_if_wr_addr,
seq_status_data_core_empty => empty,
seq_status_data_core_overrun => overrun,
seq_status_data_core_underrun => underrun,
seq_status_data_core_fp_drop => fp_drop,
seq_status_data_core_dbl_drop => dbl_drop,
seq_status_overlap_error => overlap_error,
seq_status_wave_seq_busy => wave_seq_busy,
seq_status_print_seq_busy => print_seq_busy,
dac_0v_value => dac_0v_value,
avs_address => avs_csr_address(3 downto 0),
avs_address => avs_csr_address(4 downto 0),
avs_write => local_write,
avs_writedata => avs_csr_writedata,
avs_read => local_read,
avs_readdata => local_readdata
);
c_debug_wr_if : entity work.debug_wr_if
port map (
clk => clk,
rst_n => rst_n,
-- Control and status
enable => debug_wr_if_ctrl_enable,
clr => debug_wr_if_ctrl_clr,
trig_on_underrun => debug_wr_if_ctrl_trig_underrun,
trig_on_dbl_drop => debug_wr_if_ctrl_trig_dbl_drop,
update_addr => debug_wr_if_ctrl_update_addr,
new_base_addr_bytes => debug_wr_if_base_addr,
new_end_addr_bytes => debug_wr_if_end_addr,
bytes_written => debug_wr_if_bytes_written,
overflow => debug_wr_if_status_overflow,
wr_addr => debug_wr_if_wr_addr,
triggered => debug_wr_if_status_triggered,
write_busy => debug_wr_if_status_write_busy,
-- Data to monitor
fire_pulse(0) => fire_req(0)(0),
fire_pulse(1) => fire_req(1)(0),
fire_pulse(2) => fire_req(2)(0),
fire_pulse(3) => fire_req(3)(0),
underrun => underrun,
dbl_drop => dbl_drop,
clear_buffer => clear_buffer,
pof_rx_debug => pof_rx_debug,
-- Avalon Master burst write interface for FPGA configuration block
avm_tx_write => avm_tx_write,
avm_tx_waitrequest => avm_tx_waitrequest,
avm_tx_burstcount => avm_tx_burstcount,
avm_tx_address => avm_tx_address,
avm_tx_writedata => avm_tx_writedata,
avm_tx_last => avm_tx_last
);
-- Flag GMA99 mode for cable mappings when programmed data width indicates >= 16 (GMA99 is 18, GMA33 is 6)
gma99 <= print_data_width(4);
@ -412,14 +539,16 @@ begin
-- Only want a CPU instigated measurement to go to head 0 (they're ORed together anyway)
cpu_adc_meas(NUM_HEADS - 1 downto 1) <= (others => '0');
fire_req_int <= "1111" when cpu_fire_req_pulse = '1' else fire_req_edge;
fire_req_data_int <= fire_data when fire_req_edge /= "0000" else cpu_fire_req;
-- Instantiate 4 print_unit blocks; one for each head
GEN_PRINT_UNIT_LOOP : for i in 0 to NUM_HEADS - 1 generate
pixel_buf_wr_int(i) <= '1' when cpu_push_px_buf_pulse = '1' and control_cpu_px_sel = std_logic_vector(to_unsigned(i, 2)) else pixel_buf_wr(i);
pixel_buf_wr_data_int(i) <= cpu_push_px_buf when cpu_push_px_buf_pulse = '1' and control_cpu_px_sel = std_logic_vector(to_unsigned(i, 2)) else pixel_buf_wr_data;
pixel_buf_wr_int(i) <= '1' when cpu_push_px_buf_pulse = '1' and cpu_px_sel = std_logic_vector(to_unsigned(i, 2)) else pixel_buf_wr(i);
pixel_buf_wr_data_int(i) <= cpu_push_px_buf when cpu_push_px_buf_pulse = '1' and cpu_px_sel = std_logic_vector(to_unsigned(i, 2)) else pixel_buf_wr_data;
pixel_buf_wr_int(i+MAX_HEADS) <= '1' when cpu_push_px_buf_pulse = '1' and cpu_px_sel = std_logic_vector(to_unsigned(i+MAX_HEADS, 2)) else pixel_buf_wr(i+MAX_HEADS);
pixel_buf_wr_data_int(i+MAX_HEADS) <= cpu_push_px_buf when cpu_push_px_buf_pulse = '1' and cpu_px_sel = std_logic_vector(to_unsigned(i+MAX_HEADS, 2)) else pixel_buf_wr_data;
print_unit_inst : entity work.print_unit
generic map(
@ -428,73 +557,102 @@ begin
DAC_DATA_WIDTH => 14,
MAX_OP_WIDTH => MAX_OP_WIDTH,
SHIFT_DEPTH => SHIFT_DEPTH,
PCLK_CLK_RATIO => PCLK_CLK_RATIO
PCLK_CLK_RATIO => PCLK_CLK_RATIO,
NO_ZERO_GAP => NO_ZERO_GAP,
EN_PEEK => EN_PEEK
)
port map(
clk => clk,
rst_n => rst_n,
clk => clk,
rst_n => rst_n,
avs_csr_address => avs_csr_address(5 downto 0),
avs_csr_write => avs_csr_write_int(i),
avs_csr_writedata => avs_csr_writedata,
avs_csr_read => avs_csr_read_int(i),
avs_csr_readdata => avs_csr_readdata_int(i),
avs_csr_address => avs_csr_address(5 downto 0),
avs_csr_write => avs_csr_write_int(i),
avs_csr_writedata => avs_csr_writedata,
avs_csr_read => avs_csr_read_int(i),
avs_csr_readdata => avs_csr_readdata_int(i),
avs_seq_address => avs_seq_address(9 downto 0),
avs_seq_write => avs_seq_write_int(i),
avs_seq_writedata => avs_seq_writedata,
avs_seq_read => avs_seq_read_int(i),
avs_seq_readdata => avs_seq_readdata_int(i),
avs_seq_address => avs_seq_address(9 downto 0),
avs_seq_write => avs_seq_write_int(i),
avs_seq_writedata => avs_seq_writedata,
avs_seq_read => avs_seq_read_int(i),
avs_seq_readdata => avs_seq_readdata_int(i),
pixel_buf_wr => pixel_buf_wr_int(i),
pixel_buf_wr_data => pixel_buf_wr_data_int(i),
pixel_buf_rdy => pixel_buf_rdy(i),
pixel_buf_wr => pixel_buf_wr_int(i),
pixel_buf_wr_data => pixel_buf_wr_data_int(i),
pixel_buf_rdy => pixel_buf_rdy(i),
pixel_buf_last_word => pixel_buf_last_word,
all_on_emul => all_on_emul(i),
bpp_mode => bpp_mode(i)(1 downto 0),
chan_en => chan_en,
print_data_width => print_data_width,
clear_buffer => clear_buffer(i),
empty => empty(i),
full => full(i),
overrun => overrun(i),
underrun => underrun(i),
fp_drop => fp_drop(i),
dbl_drop => dbl_drop(i),
all_on_emul => all_on_emul(i),
cpu_gl_map => cpu_gl_map_head(i),
cpu_gl_map_en => cpu_gl_map_en,
pixel_buf_wr_aux => pixel_buf_wr_int(i+MAX_HEADS),
pixel_buf_wr_data_aux => pixel_buf_wr_data_int(i+MAX_HEADS),
pixel_buf_rdy_aux => pixel_buf_rdy(i+MAX_HEADS),
pixel_buf_last_word_aux => pixel_buf_last_word,
cpu_start_dly_head => cpu_start_dly_head(i),
cpu_data_start => cpu_data_start(i),
cpu_data_start_first => cpu_data_start_first(i),
cpu_data_start_last => cpu_data_start_last(i),
cpu_adc_meas => cpu_adc_meas(i),
en_dual_data_path => en_dual_data_path,
bpp_mode => bpp_mode(i)(1 downto 0),
chan_en => chan_en,
print_data_width => print_data_width,
clear_buffer => clear_buffer(i),
empty => empty(i),
full => full(i),
overrun => overrun(i),
underrun => underrun(i),
fp_drop => fp_drop(i),
dbl_drop => dbl_drop(i),
overlap_error => overlap_error(i),
fire_req => fire_req_int(i),
fire_data => fire_req_data_int,
cpu_gl_map => cpu_gl_map_head(i),
cpu_gl_map_en => cpu_gl_map_en,
stm8_trigger_rx => stm8_trigger_rx_int(i),
sig_seq_force_dacs_0v => sig_seq_force_dacs_0v,
dac_0v_value => dac_0v_value,
cpu_start_dly_head => cpu_start_dly_head(i),
cpu_data_start => cpu_data_start(i),
cpu_data_start_first => cpu_data_start_first(i),
cpu_data_start_last => cpu_data_start_last(i),
cpu_adc_meas => cpu_adc_meas(i),
wave_req_ext => wave_req_cpu(i),
wave_addr_ext => wave_addr_cpu(i),
wave_delay_ext => (others => '0'),
fire_req => fire_req_int(i),
fire_req_start_merge => fire_req_start_merge_int(i),
fire_data => fire_req_data_int,
seq_dac_data => seq_dac_data_int(i),
wave_seq_busy => wave_seq_busy(i),
print_seq_busy => print_seq_busy(i),
px_buf_ch_nactive => px_buf_ch_nactive(i*NUM_CHANS+NUM_CHANS-1 downto i*NUM_CHANS),
print_all_on => print_all_on_int(i),
print_latch => print_latch_int(i),
print_clk => print_clk_int(i downto i),
print_data => print_data_int(i * MAX_OP_WIDTH + MAX_OP_WIDTH - 1 downto i * MAX_OP_WIDTH),
diag_word_count => diag_word_count(i),
stm8_trigger_rx => stm8_trigger_rx_int(i),
debug_out => print_unit_dbg((i * 4) + 3 downto (i * 4))
cpu_fire_req_start_merge => cpu_fire_req_start_merge,
cpu_fire_req_pulse => cpu_fire_req_pulse and not cpu_fire_req_mask(i),
cpu_start_seq_go => cpu_start_seq_go(i) and cpu_start_seq_pulse,
cpu_start_seq_address => cpu_start_seq_address,
sig_seq_force_dacs_0v => sig_seq_force_dacs_0v,
dac_0v_value => dac_0v_value,
wave_req_ext => wave_req_cpu(i),
wave_addr_ext => wave_addr_cpu(i),
wave_delay_ext => (others => '0'),
seq_dac_data => seq_dac_data_int(i),
wave_seq_busy => wave_seq_busy(i),
print_seq_busy => print_seq_busy(i),
print_all_on => print_all_on_int(i),
print_latch => print_latch_int(i),
print_clk => print_clk_int(i downto i),
print_data => print_data_int(i * MAX_OP_WIDTH + MAX_OP_WIDTH - 1 downto i * MAX_OP_WIDTH),
diag_peek_sel => diag_peek_sel(i),
diag_peek_addr => diag_peek_addr,
diag_peek_data => diag_peek_data_int(i),
diag_peek_rdptr => diag_peek_rdptr_int(i),
diag_peek_wrptr => diag_peek_wrptr_int(i),
diag_peek_wdata => diag_peek_wdata,
diag_peek_wr => diag_peek_wr,
diag_word_count => diag_word_count(i),
debug_out => print_unit_dbg((i * 4) + 3 downto (i * 4))
);
end generate GEN_PRINT_UNIT_LOOP;
@ -520,8 +678,8 @@ begin
print_clk(i downto i) <= print_clk_int(i downto i);
-- When not combining, the maximum o/p width is take the bottom N bits from each channel
print_data(i * MAX_OP_WIDTH + MAX_OP_WIDTH - 1 downto i * MAX_OP_WIDTH) <= print_data_int(3 * MAX_OP_WIDTH + MAX_OP_WIDTH / MAX_HEADS - 1 downto 3 * MAX_OP_WIDTH) &
print_data_int(2 * MAX_OP_WIDTH + MAX_OP_WIDTH / MAX_HEADS - 1 downto 2 * MAX_OP_WIDTH) &
print_data(i * MAX_OP_WIDTH + MAX_OP_WIDTH - 1 downto i * MAX_OP_WIDTH) <= print_data_int(3 * MAX_OP_WIDTH + MAX_OP_WIDTH / MAX_HEADS - 1 downto 3 * MAX_OP_WIDTH) &
print_data_int(2 * MAX_OP_WIDTH + MAX_OP_WIDTH / MAX_HEADS - 1 downto 2 * MAX_OP_WIDTH) &
print_data_int(MAX_OP_WIDTH + MAX_OP_WIDTH / MAX_HEADS - 1 downto MAX_OP_WIDTH) &
print_data_int(MAX_OP_WIDTH / MAX_HEADS - 1 downto 0);
end if;
@ -548,14 +706,14 @@ begin
DAC_DATA_WIDTH => DAC_DATA_WIDTH
)
port map(
clk_x2 => clk_x2,
rst_n => rst_n,
seq_dac_data0 => seq_dac_data(i * 2),
seq_dac_data1 => seq_dac_data(i * 2 + 1),
dac_data => dac_data(i)
);
end generate GEN_DAC_IF_LOOP;
@ -565,10 +723,11 @@ begin
print_streamer_inst : entity work.print_streamer
generic map(
MAX_HEADS => MAX_HEADS,
NUM_HEADS => NUM_HEADS,
NUM_EXT_DSTS => NUM_HEADS + 1,
SLIM => SLIM
MAX_HEADS => MAX_HEADS,
NUM_HEADS => NUM_HEADS,
NUM_CHANS => NUM_CHANS,
NO_ZERO_GAP => NO_ZERO_GAP,
STREAMER_LOGGER => STREAMER_LOGGER
)
port map(
@ -581,14 +740,6 @@ begin
avs_csr_read => print_streamer_read,
avs_csr_readdata => print_streamer_readdata,
avm_rx_waitrequest => avm_rx_waitrequest,
avm_rx_burstcount => avm_rx_burstcount,
avm_rx_address => avm_rx_address,
avm_rx_read => avm_rx_read,
avm_rx_readdata => avm_rx_readdata,
avm_rx_readdatavalid => avm_rx_readdatavalid,
axm_awaddr => axm_awaddr,
axm_awprot => axm_awprot,
axm_awvalid => axm_awvalid,
@ -616,20 +767,45 @@ begin
axm_rvalid => axm_rvalid,
axm_rready => axm_rready,
dest_port_wr => dest_port_wr(NUM_HEADS downto 0),
dest_port_wr => pixel_buf_wr,
dest_port_wr_data => pixel_buf_wr_data,
dest_port_rdy => dest_port_rdy(NUM_HEADS downto 0),
dest_port_rdy => pixel_buf_rdy,
dest_port_last_word => pixel_buf_last_word,
debug_out => ps_debug
);
-- The first NUM_HEADS ready signals are from the head pixel buffers,
-- followed by the print streamer.
dest_port_rdy <= ps_rdy & pixel_buf_rdy;
-- DIAGs
P_DIAG : process(rst_n, clk) is
begin
if rst_n = '0' then
diag_nonzero_head <= (others => (others => '0'));
print_clk_int_d <= (others => '1');
diag_nonzero_inc <= (others => '0');
elsif clk'event and clk = '1' then
diag_nonzero_inc <= (others => '0');
print_clk_int_d <= print_clk_int;
pixel_buf_wr <= dest_port_wr(pixel_buf_wr'length - 1 downto 0);
ps_wr <= dest_port_wr(pixel_buf_wr'length);
ps_wr_data <= pixel_buf_wr_data;
for i in 0 to (MAX_HEADS-1) loop
if diag_nonzero_clr(i) then
diag_nonzero_head(i) <= (others => '0');
else
if diag_nonzero_inc(i) = '1' then
if unsigned(diag_nonzero_head(i)) /= 127 then
diag_nonzero_head(i) <= std_logic_vector(unsigned(diag_nonzero_head(i))+1);
end if;
end if;
end if;
if print_clk_int(i) = '0' and print_clk_int_d(i) = '1' then
if unsigned(print_data_int(i * MAX_OP_WIDTH + 7 downto i * MAX_OP_WIDTH)) /= 0 then
diag_nonzero_inc(i) <= '1';
end if;
end if;
end loop;
end if;
end process;
end rtl;

View file

@ -113,7 +113,7 @@
},
"status" : {
"address" : "4",
"width" : "28",
"width" : "26",
"description" : "Command port",
"fields" : {
"queue_space" : {
@ -122,18 +122,6 @@
"reset" : "16",
"description" : "Amount of command space left in queue, in units of commands (2 words). I.e. when 1, can write a single command of two words."
},
"tlb_mismatch_err" : {
"type" : "r",
"bit_len" : "1",
"reset" : "0",
"description" : "TLB mapping mis-match error."
},
"tlb_empty_err" : {
"type" : "r",
"bit_len" : "1",
"reset" : "0",
"description" : "TLB empty error."
},
"auto_load_err" : {
"type" : "r",
"bit_len" : "1",
@ -180,7 +168,7 @@
},
"diags" : {
"address" : "5",
"width" : "20",
"width" : "28",
"description" : "Command port",
"fields" : {
"remain" : {
@ -218,6 +206,12 @@
"bit_len" : "1",
"reset" : "0",
"description" : "Destination ready"
},
"logger_wr_ptr" : {
"type" : "r",
"bit_len" : "8",
"reset" : "0",
"description" : "Data streamer command logger write pointer"
}
}
},
@ -324,6 +318,13 @@
"type" : "w",
"reset" : "0",
"description" : "Redirection read address"
},
"diag_logger_rdata" : {
"address" : "15",
"width" : "32",
"type" : "r",
"reset" : "0",
"description" : "Data streamer command queue logger read data"
}
}
}

View file

@ -1,7 +1,7 @@
[{
"ip_name" : "print_streamer",
"bus" : "csr",
"addr_hi_bit" : "5",
"addr_hi_bit" : "6",
"addr_lo_bit" : "4",
"description" : "This block is the top level for the GMA SOM board soft IP",
"sub_blocks" : {
@ -24,6 +24,26 @@
"instance" : "3",
"process" : "enabled",
"offset" : "0x30"
},
"data_streamer:e" : {
"instance" : "0_aux",
"process" : "enabled",
"offset" : "0x40"
},
"data_streamer:f" : {
"instance" : "1_aux",
"process" : "enabled",
"offset" : "0x50"
},
"data_streamer:g" : {
"instance" : "2_aux",
"process" : "enabled",
"offset" : "0x60"
},
"data_streamer:h" : {
"instance" : "3_aux",
"process" : "enabled",
"offset" : "0x70"
}
}
}]

View file

@ -26,7 +26,6 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
entity avm_to_axi_master is
generic (
@ -35,21 +34,21 @@ entity avm_to_axi_master is
);
port (
en_acp_window : in std_logic;
--AXI write address bus
axm_awaddr : out std_logic_vector(31 downto 0) := (others => '0');
axm_awprot : out std_logic_vector( 2 downto 0) := (others => '0');
axm_awaddr : out std_logic_vector(31 downto 0) := (others => '0'); -- @suppress "Unused port: axm_awaddr is not used in work.avm_to_axi_master(rtl)"
axm_awprot : out std_logic_vector( 2 downto 0) := (others => '0'); -- @suppress "Unused port: axm_awprot is not used in work.avm_to_axi_master(rtl)"
axm_awvalid : out std_logic; --master addr valid
axm_awready : in std_logic; --slave ready to accept
axm_awready : in std_logic; --slave ready to accept -- @suppress "Unused port: axm_awready is not used in work.avm_to_axi_master(rtl)"
--AXI write data bus
axm_wdata : out std_logic_vector(31 downto 0) := (others => '0');
axm_wlast : out std_logic := '0'; --last transfer in burst
axm_wdata : out std_logic_vector(31 downto 0) := (others => '0'); -- @suppress "Unused port: axm_wdata is not used in work.avm_to_axi_master(rtl)"
axm_wlast : out std_logic := '0'; --last transfer in burst -- @suppress "Unused port: axm_wlast is not used in work.avm_to_axi_master(rtl)"
axm_wvalid : out std_logic; --master data valid
axm_wready : in std_logic; --slave ready to accept
axm_wready : in std_logic; --slave ready to accept -- @suppress "Unused port: axm_wready is not used in work.avm_to_axi_master(rtl)"
--AXI write response bus
axm_bvalid : in std_logic;
axm_bvalid : in std_logic; -- @suppress "Unused port: axm_bvalid is not used in work.avm_to_axi_master(rtl)"
axm_bready : out std_logic;
--AXI read address bus
@ -69,18 +68,13 @@ entity avm_to_axi_master is
axm_rready : out std_logic; --master ready to accept
-- AVM input port 0
avm_rx_read0 : in std_logic;
avm_rx_burstcount0 : in std_logic_vector(11 downto 0);
avm_rx_address0 : in std_logic_vector(31 downto 0);
-- AVM input port 1
avm_rx_read1 : in std_logic;
avm_rx_burstcount1 : in std_logic_vector(11 downto 0);
avm_rx_address1 : in std_logic_vector(31 downto 0);
avm_rx_read : in std_logic;
avm_rx_burstcount : in std_logic_vector(11 downto 0);
avm_rx_address : in std_logic_vector(31 downto 0);
-- AVM common signals
avm_rx_waitrequest : out std_logic;
avm_rx_waitrequest : out std_logic;
avm_rx_readdata : out std_logic_vector(31 downto 0);
avm_rx_readdatavalid : out std_logic
@ -89,26 +83,20 @@ end entity;
architecture rtl of avm_to_axi_master is
signal avm_rx_read : std_logic;
signal avm_rx_address : std_logic_vector(31 downto 0);
signal avm_rx_burstcount : std_logic_vector(11 downto 0);
begin
-- Mux the Avalon master bus between port 0 and port 1. Port 0 has priority.
avm_rx_read <= avm_rx_read0 or avm_rx_read1;
avm_rx_address <= avm_rx_address0 when avm_rx_read0 = '1' else avm_rx_address1;
avm_rx_burstcount <= avm_rx_burstcount0 when avm_rx_read0 = '1' else avm_rx_burstcount1;
axm_awvalid <= '0';
axm_wvalid <= '0';
axm_bready <= '0';
axm_arvalid <= avm_rx_read;
axm_araddr <= en_acp_window & avm_rx_address(30 downto 0); -- Access via ACP window (bit 31 set)
axm_araddr <= '1' & avm_rx_address(30 downto 0) when en_acp_window = '1' else -- Access via ACP window (bit 31 set)
avm_rx_address(31 downto 0); -- Can access any location including ACP window
axm_arlen <= std_logic_vector(unsigned(avm_rx_burstcount(7 downto 0)) - 1);
axm_arsize <= 3X"2"; -- 4 bytes transfers (2^ARSIZE bytes)
axm_arburst <= "01"; -- Increment
axm_arburst <= "01"; -- Increment
axm_arprot <= "000"; -- Unpriviledged, non-secure, data access
axm_arcache <= ARCACHE;
axm_aruser <= ARUSER;

View file

@ -27,7 +27,6 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
package mem_arbiter_pkg is
type bus_array_t is array(natural range <>) of std_logic_vector;
@ -36,27 +35,26 @@ end package;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pkg_functions.all;
--use work.pkg_functions.all;
use work.mem_arbiter_pkg.all;
entity mem_arbiter is
generic (
NUM_HEADS : natural range 1 to 4 := 4
NUM_PORTS : natural range 1 to 16 := 8
);
port (
clk : in std_logic;
rst_n : in std_logic;
transfer_active : in std_logic_vector(NUM_HEADS-1 downto 0);
avm_rx_waitrequest_in : out std_logic_vector(NUM_HEADS-1 downto 0);
avm_rx_burstcount_in : in bus_array_t (0 to NUM_HEADS-1)(11 downto 0);
avm_rx_address_in : in bus_array_t (0 to NUM_HEADS-1)(31 downto 0);
avm_rx_read_in : in std_logic_vector(NUM_HEADS-1 downto 0);
avm_rx_readdata_in : out bus_array_t (0 to NUM_HEADS-1)(31 downto 0);
avm_rx_readdatavalid_in : out std_logic_vector(NUM_HEADS-1 downto 0);
transfer_active : in std_logic_vector(NUM_PORTS-1 downto 0);
avm_rx_waitrequest_in : out std_logic_vector(NUM_PORTS-1 downto 0);
avm_rx_burstcount_in : in bus_array_t (0 to NUM_PORTS-1)(11 downto 0);
avm_rx_address_in : in bus_array_t (0 to NUM_PORTS-1)(31 downto 0);
avm_rx_read_in : in std_logic_vector(NUM_PORTS-1 downto 0);
avm_rx_readdata_in : out bus_array_t (0 to NUM_PORTS-1)(31 downto 0);
avm_rx_readdatavalid_in : out std_logic_vector(NUM_PORTS-1 downto 0);
avm_rx_waitrequest : in std_logic;
avm_rx_burstcount : out std_logic_vector(11 downto 0);
@ -71,17 +69,17 @@ end entity mem_arbiter;
architecture rtl of mem_arbiter is
signal enable : std_logic_vector(NUM_HEADS-1 downto 0);
signal mask : std_logic_vector(NUM_HEADS-1 downto 0);
signal reqs : std_logic_vector(NUM_HEADS-1 downto 0);
signal prior_choice : std_logic_vector(NUM_HEADS-1 downto 0);
signal any_choice : std_logic_vector(NUM_HEADS-1 downto 0);
signal transfer_active_dly : std_logic_vector(NUM_HEADS-1 downto 0);
signal enable : std_logic_vector(NUM_PORTS-1 downto 0);
signal mask : std_logic_vector(NUM_PORTS-1 downto 0);
signal reqs : std_logic_vector(NUM_PORTS-1 downto 0);
signal prior_choice : std_logic_vector(NUM_PORTS-1 downto 0);
signal any_choice : std_logic_vector(NUM_PORTS-1 downto 0);
signal transfer_active_dly : std_logic_vector(NUM_PORTS-1 downto 0);
signal sel_trans_end : std_logic;
begin
GEN_ARB_LOOP : for i in 0 to NUM_HEADS-1 generate
GEN_ARB_LOOP : for i in 0 to NUM_PORTS-1 generate
avm_rx_waitrequest_in(i) <= avm_rx_waitrequest or not enable(i);
avm_rx_readdata_in(i) <= avm_rx_readdata;
@ -90,39 +88,60 @@ GEN_ARB_LOOP : for i in 0 to NUM_HEADS-1 generate
end generate GEN_ARB_LOOP;
-- Mux burst count on selected source
avm_rx_burstcount <= avm_rx_burstcount_in(3) when enable(3) = '1' else
avm_rx_burstcount <= avm_rx_burstcount_in(7) when enable(7) = '1' else
avm_rx_burstcount_in(6) when enable(6) = '1' else
avm_rx_burstcount_in(5) when enable(5) = '1' else
avm_rx_burstcount_in(4) when enable(4) = '1' else
avm_rx_burstcount_in(3) when enable(3) = '1' else
avm_rx_burstcount_in(2) when enable(2) = '1' else
avm_rx_burstcount_in(1) when enable(1) = '1' else
avm_rx_burstcount_in(0);
-- Mux address on selected source
avm_rx_address <= avm_rx_address_in(3) when enable(3) = '1' else
avm_rx_address <= avm_rx_address_in(7) when enable(7) = '1' else
avm_rx_address_in(6) when enable(6) = '1' else
avm_rx_address_in(5) when enable(5) = '1' else
avm_rx_address_in(4) when enable(4) = '1' else
avm_rx_address_in(3) when enable(3) = '1' else
avm_rx_address_in(2) when enable(2) = '1' else
avm_rx_address_in(1) when enable(1) = '1' else
avm_rx_address_in(0);
-- Issue a read whenever an enabled channel is requesting
avm_rx_read <= '1' when (enable and avm_rx_read_in) /= 4x"0" else '0';
avm_rx_read <= '1' when (enable and avm_rx_read_in) /= 8x"0" else '0';
-- Request vector for prioritised channels
reqs <= avm_rx_read_in and not mask;
-- Priority encoder to choose from one or more reqs
prior_choice <= "1000" when reqs(3) else
"0100" when reqs(2) else
"0010" when reqs(1) else
"0001";
prior_choice <= std_logic_vector(to_unsigned(2#10000000#, NUM_PORTS)) when reqs(7) else
std_logic_vector(to_unsigned(2#01000000#, NUM_PORTS)) when reqs(6) else
std_logic_vector(to_unsigned(2#00100000#, NUM_PORTS)) when reqs(5) else
std_logic_vector(to_unsigned(2#00010000#, NUM_PORTS)) when reqs(4) else
std_logic_vector(to_unsigned(2#00001000#, NUM_PORTS)) when reqs(3) else
std_logic_vector(to_unsigned(2#00000100#, NUM_PORTS)) when reqs(2) else
std_logic_vector(to_unsigned(2#00000010#, NUM_PORTS)) when reqs(1) else
std_logic_vector(to_unsigned(2#00000001#, NUM_PORTS));
-- Priority encoder to choose from any requesting channel
any_choice <= "0001" when avm_rx_read_in(0) else
"0010" when avm_rx_read_in(1) else
"0100" when avm_rx_read_in(2) else
"1000";
any_choice <= std_logic_vector(to_unsigned(2#00000001#, NUM_PORTS)) when avm_rx_read_in(0) else
std_logic_vector(to_unsigned(2#00000010#, NUM_PORTS)) when avm_rx_read_in(1) else
std_logic_vector(to_unsigned(2#00000100#, NUM_PORTS)) when avm_rx_read_in(2) else
std_logic_vector(to_unsigned(2#00001000#, NUM_PORTS)) when avm_rx_read_in(3) else
std_logic_vector(to_unsigned(2#00010000#, NUM_PORTS)) when avm_rx_read_in(4) else
std_logic_vector(to_unsigned(2#00100000#, NUM_PORTS)) when avm_rx_read_in(5) else
std_logic_vector(to_unsigned(2#01000000#, NUM_PORTS)) when avm_rx_read_in(6) else
std_logic_vector(to_unsigned(2#10000000#, NUM_PORTS));
-- Flag when selected channel end a transfer
sel_trans_end <= (transfer_active_dly(0) and not transfer_active(0) and enable(0)) or
(transfer_active_dly(1) and not transfer_active(1) and enable(1)) or
(transfer_active_dly(2) and not transfer_active(2) and enable(2)) or
(transfer_active_dly(3) and not transfer_active(3) and enable(3));
(transfer_active_dly(3) and not transfer_active(3) and enable(3)) or
(transfer_active_dly(4) and not transfer_active(4) and enable(4)) or
(transfer_active_dly(5) and not transfer_active(5) and enable(5)) or
(transfer_active_dly(6) and not transfer_active(6) and enable(6)) or
(transfer_active_dly(7) and not transfer_active(7) and enable(7));
-- Arbitration state process
process (clk, rst_n)
@ -140,7 +159,7 @@ end generate GEN_ARB_LOOP;
-- If no active channel or just ending a transfer, arbitrate for any new requests
if unsigned(enable) = 0 or sel_trans_end = '1' then
-- By default clear any outstanding enable.
enable <= (others => '0');

View file

@ -31,77 +31,71 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pkg_functions.all;
use work.mem_arbiter_pkg.all;
entity print_streamer is
generic(
CMD_QUEUE_DEPTH : natural range 1 to 1024 := 32;
MAX_HEADS : natural range 1 to 4 := 4;
NUM_HEADS : natural range 1 to 4 := 4;
NUM_EXT_DSTS : natural range 1 to 16 := 5; -- NUM_HEADS+1
SLIM : boolean := false
generic (
CMD_QUEUE_DEPTH : natural range 1 to 1024 := 32;
MAX_HEADS : natural range 1 to 4 := 4;
NUM_HEADS : natural range 1 to 4 := 4;
NUM_CHANS : natural range 1 to 16 := 2;
NO_ZERO_GAP : boolean := false;
STREAMER_LOGGER : boolean := false;
LOGGER_DEPTH : integer range 1 to 1024 := 256
);
port(
clk : in std_logic;
rst_n : in std_logic;
clk : in std_logic;
rst_n : in std_logic;
avs_csr_address : in std_logic_vector(9 downto 0);
avs_csr_write : in std_logic;
avs_csr_writedata : in std_logic_vector(31 downto 0);
avs_csr_read : in std_logic;
avs_csr_readdata : out std_logic_vector(31 downto 0);
-- External master port for access to memory system via AXI bus
avm_rx_waitrequest : out std_logic;
avm_rx_burstcount : in std_logic_vector(11 downto 0);
avm_rx_address : in std_logic_vector(31 downto 0);
avm_rx_read : in std_logic;
avm_rx_readdata : out std_logic_vector(31 downto 0);
avm_rx_readdatavalid : out std_logic;
avs_csr_address : in std_logic_vector(10 downto 0);
avs_csr_write : in std_logic;
avs_csr_writedata : in std_logic_vector(31 downto 0);
avs_csr_read : in std_logic;
avs_csr_readdata : out std_logic_vector(31 downto 0);
--AXI write address bus
axm_awaddr : out std_logic_vector(31 downto 0);
axm_awprot : out std_logic_vector(2 downto 0);
axm_awvalid : out std_logic; --master addr valid
axm_awready : in std_logic; --slave ready to accept
axm_awaddr : out std_logic_vector(31 downto 0);
axm_awprot : out std_logic_vector( 2 downto 0);
axm_awvalid : out std_logic; --master addr valid
axm_awready : in std_logic; --slave ready to accept
--AXI write data bus
axm_wdata : out std_logic_vector(31 downto 0);
axm_wlast : out std_logic; --last transfer in burst
axm_wvalid : out std_logic; --master data valid
axm_wready : in std_logic; --slave ready to accept
axm_wdata : out std_logic_vector(31 downto 0);
axm_wlast : out std_logic; --last transfer in burst
axm_wvalid : out std_logic; --master data valid
axm_wready : in std_logic; --slave ready to accept
--AXI write response bus
axm_bvalid : in std_logic;
axm_bready : out std_logic;
axm_bvalid : in std_logic;
axm_bready : out std_logic;
--AXI read address bus
axm_araddr : out std_logic_vector(31 downto 0);
axm_arlen : out std_logic_vector(7 downto 0); --burst length - 1 to 256 (ARLEN = burst len -1)
axm_arsize : out std_logic_vector(2 downto 0); --size, nb bytes, of each transfer in burst
axm_arburst : out std_logic_vector(1 downto 0); --for bursts>1, accept only incr burst=01
axm_arcache : out std_logic_vector(3 downto 0);
axm_aruser : out std_logic;
axm_arprot : out std_logic_vector(2 downto 0);
axm_arvalid : out std_logic; --master addr valid
axm_arready : in std_logic; --slave ready to accept
axm_araddr : out std_logic_vector(31 downto 0);
axm_arlen : out std_logic_vector( 7 downto 0); --burst length - 1 to 256 (ARLEN = burst len -1)
axm_arsize : out std_logic_vector( 2 downto 0); --size, nb bytes, of each transfer in burst
axm_arburst : out std_logic_vector( 1 downto 0); --for bursts>1, accept only incr burst=01
axm_arcache : out std_logic_vector( 3 downto 0);
axm_aruser : out std_logic;
axm_arprot : out std_logic_vector( 2 downto 0);
axm_arvalid : out std_logic; --master addr valid
axm_arready : in std_logic; --slave ready to accept
-- AXI read data bus
axm_rdata : in std_logic_vector(31 downto 0);
axm_rvalid : in std_logic; --slave data valid
axm_rready : out std_logic; --master ready to access
axm_rdata : in std_logic_vector(31 downto 0);
axm_rvalid : in std_logic; --slave data valid
axm_rready : out std_logic; --master ready to access
dest_port_wr : out std_logic_vector(NUM_EXT_DSTS - 1 downto 0);
dest_port_wr_data : out std_logic_vector(31 downto 0);
dest_port_rdy : in std_logic_vector(NUM_EXT_DSTS - 1 downto 0);
dest_port_wr : out std_logic_vector(MAX_HEADS*NUM_CHANS-1 downto 0);
dest_port_wr_data : out std_logic_vector(31 downto 0);
dest_port_rdy : in std_logic_vector(MAX_HEADS*NUM_CHANS-1 downto 0);
dest_port_last_word : out std_logic;
irq : out std_logic;
irq : out std_logic;
debug_out : out std_logic_vector(19 downto 0)
debug_out : out std_logic_vector(19 downto 0)
);
@ -109,438 +103,509 @@ end entity print_streamer;
architecture rtl of print_streamer is
constant CMD_QUEUE_DEPTH_LOG2 : integer := log2(CMD_QUEUE_DEPTH) - 1;
constant CMD_QUEUE_DEPTH_LOG2 : integer := log2(CMD_QUEUE_DEPTH);
type queue_spc_t is array (0 to NUM_HEADS - 1) of std_logic_vector(5 downto 0);
type watermark_t is array (0 to NUM_HEADS - 1) of std_logic_vector(7 downto 0);
type handle_t is array (0 to NUM_HEADS - 1) of std_logic_vector(11 downto 0);
type debug_t is array (0 to NUM_HEADS - 1) of std_logic_vector(19 downto 0);
-- Data streamer control and status
signal cmd_port_pulse : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal cmd_port : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal status_queue_space : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)( 5 downto 0);
signal control_clear_cmd : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal control_clear_errors : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal control_msb : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal control_watermark : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)( 7 downto 0);
signal control_en_acp_window : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal control_disable : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal control_clr_dst0_count : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal auto_cmd_active : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal auto_load_err : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal bad_cmd_err : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal cpu_race_err : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal overrun_err : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal handle : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(11 downto 0);
signal cmd_port_pulse : std_logic_vector(NUM_HEADS - 1 downto 0);
signal cmd_port : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
signal status_queue_space : queue_spc_t;
signal control_clear_cmd : std_logic_vector(NUM_HEADS - 1 downto 0);
signal control_clear_errors : std_logic_vector(NUM_HEADS - 1 downto 0);
signal control_msb : std_logic_vector(NUM_HEADS - 1 downto 0);
signal control_watermark : watermark_t;
signal control_en_acp_window : std_logic_vector(NUM_HEADS - 1 downto 0);
signal control_disable : std_logic_vector(NUM_HEADS - 1 downto 0);
signal control_clr_dst0_count : std_logic_vector(NUM_HEADS - 1 downto 0);
signal auto_cmd_active : std_logic_vector(NUM_HEADS - 1 downto 0);
signal auto_load_err : std_logic_vector(NUM_HEADS - 1 downto 0);
signal bad_cmd_err : std_logic_vector(NUM_HEADS - 1 downto 0);
signal cpu_race_err : std_logic_vector(NUM_HEADS - 1 downto 0);
signal overrun_err : std_logic_vector(NUM_HEADS - 1 downto 0);
signal handle : handle_t;
-- Avalon read interfaces from the data streamers
signal avm_rx_burstcount_int : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(11 downto 0);
signal avm_rx_address_int : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal avm_rx_read_int : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal avm_rx_waitrequest_int : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal avm_rx_readdata_int : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal avm_rx_readdatavalid_int : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal avm_rx_burstcount_int : bus_array_t(0 to MAX_HEADS - 1)(11 downto 0);
signal avm_rx_address_int : bus_array_t(0 to MAX_HEADS - 1)(31 downto 0);
signal avm_rx_read_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal avm_rx_waitrequest_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal avm_rx_readdata_int : bus_array_t(0 to MAX_HEADS - 1)(31 downto 0);
signal avm_rx_readdatavalid_int : std_logic_vector(MAX_HEADS - 1 downto 0);
-- Arbitrated avalon read interface
signal avm_rx_waitrequest_arb : std_logic;
signal avm_rx_burstcount_arb : std_logic_vector(11 downto 0);
signal avm_rx_address_arb : std_logic_vector(31 downto 0);
signal avm_rx_read_arb : std_logic;
signal avm_rx_readdata_arb : std_logic_vector(31 downto 0);
signal avm_rx_readdatavalid_arb : std_logic;
signal avm_rx_waitrequest_arb : std_logic;
signal avm_rx_burstcount_arb : std_logic_vector(11 downto 0);
signal avm_rx_address_arb : std_logic_vector(31 downto 0);
signal avm_rx_read_arb : std_logic;
signal avm_rx_readdata_arb : std_logic_vector(31 downto 0);
signal avm_rx_readdatavalid_arb : std_logic;
-- Diagnostic signals
signal debug_out_int : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(19 downto 0);
signal diag_1 : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal diag_2 : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal dst0_word_count : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal debug_out_int : debug_t;
-- Register access signals for each of the data streamer register blocks
signal avs_csr_readdata_int : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal avs_csr_write_int : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal avs_csr_read_int : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal diag_1 : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
signal diag_2 : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
signal dst0_word_count : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
-- Streamer interrupt signal
signal irq_int : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal avs_csr_readdata_int : bus_array_t(0 to MAX_HEADS - 1)(31 downto 0);
signal avs_csr_write_int : std_logic_vector(MAX_HEADS - 1 downto 0);
signal avs_csr_read_int : std_logic_vector(MAX_HEADS - 1 downto 0);
-- Dta streamer data output write busses
signal dest_port_wr_data_int : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal dest_port_last_word_int : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal irq_int : std_logic_vector(NUM_HEADS - 1 downto 0);
-- Data streamer actives statuses
signal transfer_active : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal dest_port_wr_data_int : bus_array_t(0 to MAX_HEADS - 1)(31 downto 0);
-- Streamer FIFO signals
signal fifo_wr_port_pulse : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_wr_port : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal fifo_wr_port_in : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal fifo_rd_port : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal fifo_rd_port_pulse : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_status_empty : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_status_full : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_status_underrun : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_status_overrun : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_controls_clr_fifo : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_controls_clr_errors : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_controls_pop_rd_port : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal fifo_rd_addr : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal fifo_loop_count : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)( 9 downto 0);
signal dest_port_wr_0 : std_logic_vector(1 downto 0);
signal dest_port_rdy_0 : std_logic_vector(1 downto 0);
signal diag_cmd_q_write : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0);
signal diag_cmd_q_write_data : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal diag_cmd_q_read_data : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(31 downto 0);
signal diag_cmd_q_rd_addr : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(log2(LOGGER_DEPTH)-2 downto 0) := (others => (others => '0'));
signal diag_cmd_q_clr_log : std_logic_vector(NUM_CHANS*MAX_HEADS-1 downto 0) := (others => '0');
signal diag_cmd_q_wr_count : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)(log2(LOGGER_DEPTH)-2 downto 0) := (others => (others => '0'));
signal fifo_wr_port_pulse : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_wr_port : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
signal fifo_wr_port_in : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
signal fifo_rd_port : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
signal fifo_rd_port_pulse : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_status_empty : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_status_full : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_status_underrun : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_status_overrun : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_controls_clr_fifo : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_controls_clr_errors : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_controls_pop_rd_port : std_logic_vector(NUM_HEADS - 1 downto 0);
signal fifo_rd_addr : bus_array_t(0 to NUM_HEADS - 1)(31 downto 0);
signal fifo_loop_count : bus_array_t(0 to NUM_HEADS - 1)(9 downto 0);
signal ip_id_ip_number : bus_array_t(0 to NUM_HEADS - 1)(7 downto 0);
signal ip_id_mfr_number : bus_array_t(0 to NUM_HEADS - 1)(7 downto 0);
signal ip_ver_minor_number : bus_array_t(0 to NUM_HEADS - 1)(7 downto 0);
signal ip_ver_major_number : bus_array_t(0 to NUM_HEADS - 1)(7 downto 0);
signal dest_port_wr_int : std_logic_vector(MAX_HEADS downto 0);
signal transfer_active : std_logic_vector(MAX_HEADS - 1 downto 0);
-- ID signals
signal ip_id_ip_number : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)( 7 downto 0);
signal ip_id_mfr_number : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)( 7 downto 0);
signal ip_ver_minor_number : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)( 7 downto 0);
signal ip_ver_major_number : bus_array_t(0 to NUM_CHANS*MAX_HEADS-1)( 7 downto 0);
begin
debug_out <= debug_out_int(0);
-- -----------------------------------
-- Data path combinatorial logic
-- -----------------------------------
irq <= '0' when irq_int = std_logic_vector(to_unsigned(0, NUM_HEADS)) else '1';
-- Export debug bus from streamer 0
debug_out <= debug_out_int(0);
dest_port_wr_int(NUM_EXT_DSTS - 1 downto 0) <= dest_port_wr;
dest_port_wr_data <= dest_port_wr_data_int(3) when dest_port_wr_int(3) = '1' else
dest_port_wr_data_int(2) when dest_port_wr_int(2) = '1' else
dest_port_wr_data_int(1) when dest_port_wr_int(1) = '1' else
dest_port_wr_data_int(0);
-- Interrupt on output if any interrupt asserted
irq <= '0' when irq_int = std_logic_vector(to_unsigned(0, NUM_CHANS*MAX_HEADS)) else '1';
dest_port_wr(0) <= dest_port_wr_0(0);
dest_port_wr(NUM_EXT_DSTS - 1) <= dest_port_wr_0(1);
-- Mux the destination output bus from data streamers with an (arbitrary) priority encoding
process (all)
begin
dest_port_wr_data <= dest_port_wr_data_int(0);
dest_port_rdy_0(0) <= dest_port_rdy(0);
dest_port_rdy_0(1) <= dest_port_rdy(NUM_EXT_DSTS - 1);
for i in NUM_CHANS*MAX_HEADS-1 downto 1 loop
if dest_port_wr(i) then
dest_port_wr_data <= dest_port_wr_data_int(i);
end if;
end loop;
end process;
dest_port_last_word <= '1' when unsigned(dest_port_last_word_int) /= 0 else '0';
-- When the number of heads is less than the coonfigured maximum, tie off upper
-- bits of key signals
GEN_TIE_OFF_REQD : if MAX_HEADS > NUM_HEADS generate
GEN_TIE_OFF : for i in NUM_HEADS to MAX_HEADS - 1 generate
avm_rx_read_int(i) <= '0';
dest_port_wr_int(i + 1) <= '0';
transfer_active(i) <= '0';
avs_csr_readdata_int(i) <= (others => '0');
GEN_TIE_OFF : for i in NUM_HEADS to MAX_HEADS-1 generate
avm_rx_read_int(i) <= '0';
avm_rx_read_int(i+MAX_HEADS) <= '0';
transfer_active(i) <= '0';
transfer_active(i+MAX_HEADS) <= '0';
avs_csr_readdata_int(i) <= (others => '0');
avs_csr_readdata_int(i+MAX_HEADS) <= (others => '0');
dest_port_last_word_int(i) <= '0';
dest_port_last_word_int(i+MAX_HEADS) <= '0';
dest_port_wr(i) <= '0';
dest_port_wr(i+MAX_HEADS) <= '0';
avm_rx_burstcount_int(i) <= (others => '0');
avm_rx_burstcount_int(i+MAX_HEADS) <= (others => '0');
avm_rx_address_int(i) <= (others => '0');
avm_rx_address_int(i+MAX_HEADS) <= (others => '0');
dest_port_wr_data_int(i) <= (others => '0');
dest_port_wr_data_int(i+MAX_HEADS) <= (others => '0');
diag_1(i) <= (others => '0');
diag_1(i+MAX_HEADS) <= (others => '0');
diag_2(i) <= (others => '0');
diag_2(i+MAX_HEADS) <= (others => '0');
irq_int(i) <= '0';
irq_int(i+MAX_HEADS) <= '0';
end generate GEN_TIE_OFF;
end generate GEN_TIE_OFF_REQD;
print_streamer_csr_decode_1 : entity work.print_streamer_csr_decode -- @suppress "Generic map uses default values. Missing optional actuals: ADDR_DECODE_HI_BIT, ADDR_DECODE_LO_BIT"
port map(
-- If zero gap support is not required tie off the signals from the uninstantiated zero gap logic
GEN_ZG_TIE_OFF : if NO_ZERO_GAP generate
GEN_ZG_TIE_OFF_LOOP : for i in MAX_HEADS to MAX_HEADS+NUM_HEADS-1 generate
data_streamer_0_write => avs_csr_write_int(0),
data_streamer_0_read => avs_csr_read_int(0),
data_streamer_0_readdata => avs_csr_readdata_int(0),
data_streamer_1_write => avs_csr_write_int(1),
data_streamer_1_read => avs_csr_read_int(1),
data_streamer_1_readdata => avs_csr_readdata_int(1),
data_streamer_2_write => avs_csr_write_int(2),
data_streamer_2_read => avs_csr_read_int(2),
data_streamer_2_readdata => avs_csr_readdata_int(2),
data_streamer_3_write => avs_csr_write_int(3),
data_streamer_3_read => avs_csr_read_int(3),
data_streamer_3_readdata => avs_csr_readdata_int(3),
avs_csr_readdata_int(i) <= (others => '0');
dest_port_last_word_int(i) <= '0';
dest_port_wr(i) <= '0';
avm_rx_burstcount_int(i) <= (others => '0');
dest_port_wr_data_int(i) <= (others => '0');
diag_1(i) <= (others => '0');
diag_2(i) <= (others => '0');
irq_int(i) <= '0';
avs_address => avs_csr_address(5 downto 4),
avs_write => avs_csr_write,
avs_read => avs_csr_read,
avs_readdata => avs_csr_readdata
end generate;
end generate GEN_ZG_TIE_OFF;
);
-- -----------------------------------
-- Register access address decode
-- -----------------------------------
GEN_PRINT_STREAMER_LOOP : for i in 0 to NUM_HEADS - 1 generate
print_streamer_csr_decode_1 : entity work.print_streamer_csr_decode
generic map (
ADDR_DECODE_HI_BIT => 6,
ADDR_DECODE_LO_BIT => 4
)
port map (
data_streamer_csr_regs_inst : entity work.data_streamer_csr_regs
generic map(
ADDR_DECODE_WIDTH => 4
)
port map(
clk => clk,
rst_n => rst_n,
data_streamer_0_write => avs_csr_write_int(0),
data_streamer_0_read => avs_csr_read_int(0),
data_streamer_0_readdata => avs_csr_readdata_int(0),
data_streamer_1_write => avs_csr_write_int(1),
data_streamer_1_read => avs_csr_read_int(1),
data_streamer_1_readdata => avs_csr_readdata_int(1),
data_streamer_2_write => avs_csr_write_int(2),
data_streamer_2_read => avs_csr_read_int(2),
data_streamer_2_readdata => avs_csr_readdata_int(2),
data_streamer_3_write => avs_csr_write_int(3),
data_streamer_3_read => avs_csr_read_int(3),
data_streamer_3_readdata => avs_csr_readdata_int(3),
control_clear_cmd => control_clear_cmd(i),
control_clear_errors => control_clear_errors(i),
control_msb => control_msb(i),
control_watermark => control_watermark(i),
control_en_acp_window => control_en_acp_window(i),
control_disable => control_disable(i),
control_clr_dst0_count => control_clr_dst0_count(i),
cmd_port_pulse => cmd_port_pulse(i),
cmd_port => cmd_port(i),
cmd_port_in => (others => '0'),
status_queue_space => status_queue_space(i)(5 downto 1),
data_streamer_0_aux_write => avs_csr_write_int(4),
data_streamer_0_aux_read => avs_csr_read_int(4),
data_streamer_0_aux_readdata => avs_csr_readdata_int(4),
data_streamer_1_aux_write => avs_csr_write_int(5),
data_streamer_1_aux_read => avs_csr_read_int(5),
data_streamer_1_aux_readdata => avs_csr_readdata_int(5),
data_streamer_2_aux_write => avs_csr_write_int(6),
data_streamer_2_aux_read => avs_csr_read_int(6),
data_streamer_2_aux_readdata => avs_csr_readdata_int(6),
data_streamer_3_aux_write => avs_csr_write_int(7),
data_streamer_3_aux_read => avs_csr_read_int(7),
data_streamer_3_aux_readdata => avs_csr_readdata_int(7),
status_tlb_mismatch_err => '0',
status_tlb_empty_err => '0',
status_auto_load_err => auto_load_err(i),
status_bad_cmd_err => bad_cmd_err(i),
status_cpu_race_err => cpu_race_err(i),
status_overrun_err => overrun_err(i),
status_auto_cmd_active => auto_cmd_active(i),
status_cmd_depth_log2 => std_logic_vector(to_unsigned(CMD_QUEUE_DEPTH_LOG2, 4)),
status_handle => handle(i),
avs_address => avs_csr_address(6 downto 4),
avs_write => avs_csr_write,
avs_read => avs_csr_read,
avs_readdata => avs_csr_readdata
diags_remain => debug_out_int(i)(11 downto 0),
diags_cmd_pending => debug_out_int(i)(12),
diags_data_active => debug_out_int(i)(13),
diags_cmd_avail => debug_out_int(i)(14),
diags_dst_sel => debug_out_int(i)(18 downto 15),
diags_dst_rdy => debug_out_int(i)(19),
);
curr_cmd => diag_1(i),
curr_param1 => diag_2(i),
dst0_word_count => dst0_word_count(i),
-- -----------------------------------
--Instantiation of streamer channels
-- -----------------------------------
fifo_wr_port_pulse => fifo_wr_port_pulse(i),
fifo_wr_port => fifo_wr_port(i),
fifo_wr_port_in => fifo_wr_port_in(i),
fifo_rd_port => fifo_rd_port(i),
fifo_rd_port_pulse => fifo_rd_port_pulse(i),
fifo_status_empty => fifo_status_empty(i),
fifo_status_full => fifo_status_full(i),
fifo_status_underrun => fifo_status_underrun(i),
fifo_status_overrun => fifo_status_overrun(i),
fifo_status_loop_count => fifo_loop_count(i),
fifo_controls_clr_fifo => fifo_controls_clr_fifo(i),
fifo_controls_clr_errors => fifo_controls_clr_errors(i),
fifo_controls_pop_rd_port => fifo_controls_pop_rd_port(i),
fifo_rd_addr => fifo_rd_addr(i),
GEN_AUX_LOOP : for j in 0 to 1 generate
ip_id_ip_number => ip_id_ip_number(i),
ip_id_mfr_number => ip_id_mfr_number(i),
ip_ver_minor_number => ip_ver_minor_number(i),
ip_ver_major_number => ip_ver_major_number(i),
GEN_PRINT_STREAMER_LOOP : for i in 0 to NUM_HEADS-1 generate
avs_address => avs_csr_address(3 downto 0),
avs_write => avs_csr_write_int(i),
avs_writedata => avs_csr_writedata,
avs_read => avs_csr_read_int(i),
avs_readdata => avs_csr_readdata_int(i)
GEN_ZERO_GAP : if NO_ZERO_GAP = false or j = 0 generate
);
-- ----------------------------------
-- Streamer logger
-- ----------------------------------
GEN_LOGGER : if STREAMER_LOGGER generate
fifo_queue_inst : entity work.streamer_fifo_0
port map(
streamer_log_inst : entity work.streamer_logger_7
generic map (
LOGGER_DEPTH => LOGGER_DEPTH
)
port map (
clk => clk,
rst_n => rst_n,
clk => clk,
rst_n => rst_n,
fifo_wr_port_pulse => fifo_wr_port_pulse(i),
fifo_wr_port => fifo_wr_port(i),
fifo_wr_port_in => fifo_wr_port_in(i),
fifo_rd_port => fifo_rd_port(i),
fifo_rd_port_pulse => fifo_rd_port_pulse(i),
fifo_status_empty => fifo_status_empty(i),
fifo_status_full => fifo_status_full(i),
fifo_status_underrun => fifo_status_underrun(i),
fifo_status_overrun => fifo_status_overrun(i),
fifo_controls_clr_fifo => fifo_controls_clr_fifo(i),
fifo_controls_clr_errors => fifo_controls_clr_errors(i),
fifo_controls_pop_rd_port => fifo_controls_pop_rd_port(i),
fifo_loop_count => fifo_loop_count(i),
wr_req => diag_cmd_q_write(i+j*MAX_HEADS),
wr_data => diag_cmd_q_write_data(i+j*MAX_HEADS),
wr_ptr => diag_cmd_q_wr_count(i+j*MAX_HEADS),
avm_rx_address => avm_rx_address_int(i)(31 downto 28),
avm_rx_read => avm_rx_read_int(i),
avm_rx_waitrequest => avm_rx_waitrequest_int(i),
avm_rx_readdatavalid => avm_rx_readdatavalid_int(i)
rd_addr => diag_cmd_q_rd_addr(i+j*MAX_HEADS),
rd_data_out => diag_cmd_q_read_data(i+j*MAX_HEADS),
clr_logger => diag_cmd_q_clr_log(i+j*MAX_HEADS)
);
);
GEN_DATA_STREAMER0 : if i = 0 generate
end generate;
data_streamer_inst : entity work.data_streamer_7
generic map(
NUM_EXT_DSTS => 2,
CMD_QUEUE_DEPTH => CMD_QUEUE_DEPTH,
EXCLUDE_VIRTUAL_MAPPING_LOGIC => SLIM
-- -----------------------------------
-- Data streamer registers
-- -----------------------------------
data_streamer_csr_regs_inst : entity work.data_streamer_csr_regs
generic map (
ADDR_DECODE_WIDTH => 4
)
port map(
port map (
clk => clk,
rst_n => rst_n,
clk => clk,
rst_n => rst_n,
control_clear_cmd => control_clear_cmd(i+j*MAX_HEADS),
control_clear_errors => control_clear_errors(i+j*MAX_HEADS),
control_msb => control_msb(i+j*MAX_HEADS),
control_watermark => control_watermark(i+j*MAX_HEADS),
control_en_acp_window => control_en_acp_window(i+j*MAX_HEADS),
control_disable => control_disable(i+j*MAX_HEADS),
control_clr_dst0_count => control_clr_dst0_count(i+j*MAX_HEADS),
cmd_port_pulse => cmd_port_pulse(i+j*MAX_HEADS),
cmd_port => cmd_port(i+j*MAX_HEADS),
cmd_port_in => (others => '0'),
control_clear_cmd => control_clear_cmd(i),
control_clear_errors => control_clear_errors(i),
control_msb => control_msb(i),
control_watermark => control_watermark(i),
control_disable => control_disable(i),
control_clr_dst0_count => control_clr_dst0_count(i),
status_queue_space => status_queue_space(i+j*MAX_HEADS)(5 downto 1),
status_auto_load_err => auto_load_err(i+j*MAX_HEADS),
status_bad_cmd_err => bad_cmd_err(i+j*MAX_HEADS),
status_cpu_race_err => cpu_race_err(i+j*MAX_HEADS),
status_overrun_err => overrun_err(i+j*MAX_HEADS),
status_auto_cmd_active => auto_cmd_active(i+j*MAX_HEADS),
status_cmd_depth_log2 => std_logic_vector(to_unsigned(CMD_QUEUE_DEPTH_LOG2, 4)),
status_handle => handle(i+j*MAX_HEADS),
cmd_port_wr => cmd_port_pulse(i),
cmd_port => cmd_port(i),
diags_remain => debug_out_int(i+j*MAX_HEADS)(11 downto 0),
diags_cmd_pending => debug_out_int(i+j*MAX_HEADS)(12),
diags_data_active => debug_out_int(i+j*MAX_HEADS)(13),
diags_cmd_avail => debug_out_int(i+j*MAX_HEADS)(14),
diags_dst_sel => debug_out_int(i+j*MAX_HEADS)(18 downto 15),
diags_dst_rdy => debug_out_int(i+j*MAX_HEADS)(19),
auto_load_err => auto_load_err(i),
bad_cmd_err => bad_cmd_err(i),
cpu_race_err => cpu_race_err(i),
overrun_err => overrun_err(i),
auto_cmd_active => auto_cmd_active(i),
status_queue_space => status_queue_space(i),
handle => handle(i),
diags_logger_wr_ptr => diag_cmd_q_wr_count(i+j*MAX_HEADS),
diag_logger_rdata => diag_cmd_q_read_data(i+j*MAX_HEADS),
avm_rx_waitrequest => avm_rx_waitrequest_int(i),
avm_rx_burstcount => avm_rx_burstcount_int(i),
avm_rx_address => avm_rx_address_int(i),
avm_rx_read => avm_rx_read_int(i),
avm_rx_readdata => avm_rx_readdata_int(i),
avm_rx_readdatavalid => avm_rx_readdatavalid_int(i),
curr_cmd => diag_1(i+j*MAX_HEADS),
curr_param1 => diag_2(i+j*MAX_HEADS),
dest_port_wr => dest_port_wr_0,
dest_port_wr_data => dest_port_wr_data_int(i),
dest_port_rdy => dest_port_rdy_0,
dst0_word_count => dst0_word_count(i+j*MAX_HEADS),
transfer_active => transfer_active(i),
fifo_wr_port_pulse => fifo_wr_port_pulse(i+j*MAX_HEADS),
fifo_wr_port => fifo_wr_port(i+j*MAX_HEADS),
fifo_wr_port_in => fifo_wr_port_in(i+j*MAX_HEADS),
fifo_rd_port => fifo_rd_port(i+j*MAX_HEADS),
fifo_rd_port_pulse => fifo_rd_port_pulse(i+j*MAX_HEADS),
fifo_status_empty => fifo_status_empty(i+j*MAX_HEADS),
fifo_status_full => fifo_status_full(i+j*MAX_HEADS),
fifo_status_underrun => fifo_status_underrun(i+j*MAX_HEADS),
fifo_status_overrun => fifo_status_overrun(i+j*MAX_HEADS),
fifo_status_loop_count => fifo_loop_count(i+j*MAX_HEADS),
fifo_controls_clr_fifo => fifo_controls_clr_fifo(i+j*MAX_HEADS),
fifo_controls_clr_errors => fifo_controls_clr_errors(i+j*MAX_HEADS),
fifo_controls_pop_rd_port => fifo_controls_pop_rd_port(i+j*MAX_HEADS),
fifo_rd_addr => fifo_rd_addr(i+j*MAX_HEADS),
irq => irq_int(i),
ip_id_ip_number => ip_id_ip_number(i+j*MAX_HEADS),
ip_id_mfr_number => ip_id_mfr_number(i+j*MAX_HEADS),
ip_ver_minor_number => ip_ver_minor_number(i+j*MAX_HEADS),
ip_ver_major_number => ip_ver_major_number(i+j*MAX_HEADS),
ld_q_redirect_addr => fifo_rd_addr(i),
ip_id_ip_number => ip_id_ip_number(i),
ip_id_mfr_number => ip_id_mfr_number(i),
ip_ver_minor_number => ip_ver_minor_number(i),
ip_ver_major_number => ip_ver_major_number(i),
debug_out => debug_out_int(i),
diag_dst0_count => dst0_word_count(i),
diag_1 => diag_1(i),
diag_2 => diag_2(i)
);
end generate GEN_DATA_STREAMER0;
GEN_DATA_STREAMER : if i /= 0 generate
data_streamer_inst : entity work.data_streamer_7
generic map(
NUM_EXT_DSTS => 1,
CMD_QUEUE_DEPTH => CMD_QUEUE_DEPTH,
EXCLUDE_VIRTUAL_MAPPING_LOGIC => SLIM
)
port map(
clk => clk,
rst_n => rst_n,
control_clear_cmd => control_clear_cmd(i),
control_clear_errors => control_clear_errors(i),
control_msb => control_msb(i),
control_watermark => control_watermark(i),
control_disable => control_disable(i),
control_clr_dst0_count => control_clr_dst0_count(i),
cmd_port_wr => cmd_port_pulse(i),
cmd_port => cmd_port(i),
auto_load_err => auto_load_err(i),
bad_cmd_err => bad_cmd_err(i),
cpu_race_err => cpu_race_err(i),
overrun_err => overrun_err(i),
auto_cmd_active => auto_cmd_active(i),
status_queue_space => status_queue_space(i),
handle => handle(i),
avm_rx_waitrequest => avm_rx_waitrequest_int(i),
avm_rx_burstcount => avm_rx_burstcount_int(i),
avm_rx_address => avm_rx_address_int(i),
avm_rx_read => avm_rx_read_int(i),
avm_rx_readdata => avm_rx_readdata_int(i),
avm_rx_readdatavalid => avm_rx_readdatavalid_int(i),
dest_port_wr => dest_port_wr(i downto i),
dest_port_wr_data => dest_port_wr_data_int(i),
dest_port_rdy => dest_port_rdy(i downto i),
transfer_active => transfer_active(i),
irq => irq_int(i),
ld_q_redirect_addr => fifo_rd_addr(i),
ip_id_ip_number => ip_id_ip_number(i),
ip_id_mfr_number => ip_id_mfr_number(i),
ip_ver_minor_number => ip_ver_minor_number(i),
ip_ver_major_number => ip_ver_major_number(i),
debug_out => debug_out_int(i),
diag_dst0_count => dst0_word_count(i),
diag_1 => diag_1(i),
diag_2 => diag_2(i)
avs_address => avs_csr_address(3 downto 0),
avs_write => avs_csr_write_int(i+j*MAX_HEADS),
avs_writedata => avs_csr_writedata,
avs_read => avs_csr_read_int(i+j*MAX_HEADS),
avs_readdata => avs_csr_readdata_int(i+j*MAX_HEADS)
);
end generate GEN_DATA_STREAMER;
-- -----------------------------------
-- Streamer indirection FIFO
-- -----------------------------------
end generate GEN_PRINT_STREAMER_LOOP;
fifo_queue_inst : entity work.streamer_fifo_0
port map (
clk => clk,
rst_n => rst_n,
fifo_wr_port_pulse => fifo_wr_port_pulse(i+j*MAX_HEADS),
fifo_wr_port => fifo_wr_port(i+j*MAX_HEADS),
fifo_wr_port_in => fifo_wr_port_in(i+j*MAX_HEADS),
fifo_rd_port => fifo_rd_port(i+j*MAX_HEADS),
fifo_rd_port_pulse => fifo_rd_port_pulse(i+j*MAX_HEADS),
fifo_status_empty => fifo_status_empty(i+j*MAX_HEADS),
fifo_status_full => fifo_status_full(i+j*MAX_HEADS),
fifo_status_underrun => fifo_status_underrun(i+j*MAX_HEADS),
fifo_status_overrun => fifo_status_overrun(i+j*MAX_HEADS),
fifo_controls_clr_fifo => fifo_controls_clr_fifo(i+j*MAX_HEADS),
fifo_controls_clr_errors => fifo_controls_clr_errors(i+j*MAX_HEADS),
fifo_controls_pop_rd_port => fifo_controls_pop_rd_port(i+j*MAX_HEADS),
fifo_loop_count => fifo_loop_count(i+j*MAX_HEADS),
avm_rx_address => avm_rx_address_int(i+j*MAX_HEADS)(31 downto 28),
avm_rx_read => avm_rx_read_int(i+j*MAX_HEADS),
avm_rx_waitrequest => avm_rx_waitrequest_int(i+j*MAX_HEADS),
avm_rx_readdatavalid => avm_rx_readdatavalid_int(i+j*MAX_HEADS)
);
-- -----------------------------------
-- Data streamer logic
-- -----------------------------------
data_streamer_inst : entity work.data_streamer_7
generic map(
NUM_EXT_DSTS => 1,
CMD_QUEUE_DEPTH => CMD_QUEUE_DEPTH,
EXCLUDE_VIRTUAL_MAPPING_LOGIC => true
)
port map(
clk => clk,
rst_n => rst_n,
control_clear_cmd => control_clear_cmd(i+j*MAX_HEADS),
control_clear_errors => control_clear_errors(i+j*MAX_HEADS),
control_msb => control_msb(i+j*MAX_HEADS),
control_watermark => control_watermark(i+j*MAX_HEADS),
control_disable => control_disable(i+j*MAX_HEADS),
control_clr_dst0_count => control_clr_dst0_count(i+j*MAX_HEADS),
cmd_port_wr => cmd_port_pulse(i+j*MAX_HEADS),
cmd_port => cmd_port(i+j*MAX_HEADS),
auto_load_err => auto_load_err(i+j*MAX_HEADS),
bad_cmd_err => bad_cmd_err(i+j*MAX_HEADS),
cpu_race_err => cpu_race_err(i+j*MAX_HEADS),
overrun_err => overrun_err(i+j*MAX_HEADS),
auto_cmd_active => auto_cmd_active(i+j*MAX_HEADS),
status_queue_space => status_queue_space(i+j*MAX_HEADS),
handle => handle(i+j*MAX_HEADS),
avm_rx_waitrequest => avm_rx_waitrequest_int(i+j*MAX_HEADS),
avm_rx_burstcount => avm_rx_burstcount_int(i+j*MAX_HEADS),
avm_rx_address => avm_rx_address_int(i+j*MAX_HEADS),
avm_rx_read => avm_rx_read_int(i+j*MAX_HEADS),
avm_rx_readdata => avm_rx_readdata_int(i+j*MAX_HEADS),
avm_rx_readdatavalid => avm_rx_readdatavalid_int(i+j*MAX_HEADS),
dest_port_wr => dest_port_wr(i+j*MAX_HEADS downto i+j*MAX_HEADS),
dest_port_wr_data => dest_port_wr_data_int(i+j*MAX_HEADS),
dest_port_rdy => dest_port_rdy(i+j*MAX_HEADS downto i+j*MAX_HEADS),
dest_port_last_word => dest_port_last_word_int(i+j*MAX_HEADS),
ip_id_ip_number => ip_id_ip_number(i+j*MAX_HEADS),
ip_id_mfr_number => ip_id_mfr_number(i+j*MAX_HEADS),
ip_ver_minor_number => ip_ver_minor_number(i+j*MAX_HEADS),
ip_ver_major_number => ip_ver_major_number(i+j*MAX_HEADS),
transfer_active => transfer_active(i+j*MAX_HEADS),
irq => irq_int(i+j*MAX_HEADS),
ld_q_redirect_addr => fifo_rd_addr(i+j*MAX_HEADS),
debug_out => debug_out_int(i+j*MAX_HEADS),
diag_dst0_count => dst0_word_count(i+j*MAX_HEADS),
diag_1 => diag_1(i+j*MAX_HEADS),
diag_2 => diag_2(i+j*MAX_HEADS),
diag_cmd_q_write => diag_cmd_q_write(i+j*MAX_HEADS),
diag_cmd_q_write_data => diag_cmd_q_write_data(i+j*MAX_HEADS)
);
end generate GEN_ZERO_GAP;
GEN_NO_ZERO_GAP : if NO_ZERO_GAP and j = 1 generate
transfer_active(i+MAX_HEADS) <= '0';
auto_cmd_active(i+MAX_HEADS) <= '0';
avm_rx_read_int(i+MAX_HEADS) <= '0';
end generate GEN_NO_ZERO_GAP;
end generate GEN_PRINT_STREAMER_LOOP;
end generate GEN_AUX_LOOP;
-- -----------------------------------
-- Memory arbitration
-- -----------------------------------
mem_arbiter_inst : entity work.mem_arbiter
generic map(
NUM_HEADS => MAX_HEADS -- arbiter always for the maximim
)
port map(
generic map(
NUM_PORTS => MAX_HEADS*2
)
port map(
clk => clk,
rst_n => rst_n,
clk => clk,
rst_n => rst_n,
transfer_active => transfer_active,
avm_rx_waitrequest_in => avm_rx_waitrequest_int,
avm_rx_burstcount_in => avm_rx_burstcount_int,
avm_rx_address_in => avm_rx_address_int,
avm_rx_read_in => avm_rx_read_int,
avm_rx_readdata_in => avm_rx_readdata_int,
avm_rx_readdatavalid_in => avm_rx_readdatavalid_int,
transfer_active => transfer_active,
avm_rx_waitrequest_in => avm_rx_waitrequest_int,
avm_rx_burstcount_in => avm_rx_burstcount_int,
avm_rx_address_in => avm_rx_address_int,
avm_rx_read_in => avm_rx_read_int,
avm_rx_readdata_in => avm_rx_readdata_int,
avm_rx_readdatavalid_in => avm_rx_readdatavalid_int,
avm_rx_waitrequest => avm_rx_waitrequest_arb,
avm_rx_burstcount => avm_rx_burstcount_arb,
avm_rx_address => avm_rx_address_arb,
avm_rx_read => avm_rx_read_arb,
avm_rx_readdata => avm_rx_readdata_arb,
avm_rx_readdatavalid => avm_rx_readdatavalid_arb
avm_rx_waitrequest => avm_rx_waitrequest_arb,
avm_rx_burstcount => avm_rx_burstcount_arb,
avm_rx_address => avm_rx_address_arb,
avm_rx_read => avm_rx_read_arb,
avm_rx_readdata => avm_rx_readdata_arb,
avm_rx_readdatavalid => avm_rx_readdatavalid_arb
);
);
avm_to_axi_master_inst : entity work.avm_to_axi_master -- @suppress "Generic map uses default values. Missing optional actuals: ARUSER, ARCACHE"
port map(
-- -----------------------------------
-- Avalon to AXI-4 adapter
-- -----------------------------------
en_acp_window => control_en_acp_window(0),
avm_to_axi_master_inst : entity work.avm_to_axi_master
port map (
axm_awaddr => axm_awaddr,
axm_awprot => axm_awprot,
axm_awvalid => axm_awvalid,
axm_awready => axm_awready,
en_acp_window => control_en_acp_window(0),
axm_wdata => axm_wdata,
axm_wlast => axm_wlast,
axm_wvalid => axm_wvalid,
axm_wready => axm_wready,
axm_awaddr => axm_awaddr,
axm_awprot => axm_awprot,
axm_awvalid => axm_awvalid,
axm_awready => axm_awready,
axm_bvalid => axm_bvalid,
axm_bready => axm_bready,
axm_wdata => axm_wdata,
axm_wlast => axm_wlast,
axm_wvalid => axm_wvalid,
axm_wready => axm_wready,
axm_araddr => axm_araddr,
axm_arlen => axm_arlen,
axm_arsize => axm_arsize,
axm_arburst => axm_arburst,
axm_arcache => axm_arcache,
axm_aruser => axm_aruser,
axm_arprot => axm_arprot,
axm_arvalid => axm_arvalid,
axm_arready => axm_arready,
axm_bvalid => axm_bvalid,
axm_bready => axm_bready,
axm_rdata => axm_rdata,
axm_rvalid => axm_rvalid,
axm_rready => axm_rready,
axm_araddr => axm_araddr,
axm_arlen => axm_arlen,
axm_arsize => axm_arsize,
axm_arburst => axm_arburst,
axm_arcache => axm_arcache,
axm_aruser => axm_aruser,
axm_arprot => axm_arprot,
axm_arvalid => axm_arvalid,
axm_arready => axm_arready,
avm_rx_waitrequest => avm_rx_waitrequest_arb,
axm_rdata => axm_rdata,
axm_rvalid => axm_rvalid,
axm_rready => axm_rready,
avm_rx_burstcount1 => avm_rx_burstcount,
avm_rx_address1 => avm_rx_address,
avm_rx_read1 => avm_rx_read,
avm_rx_waitrequest => avm_rx_waitrequest_arb,
avm_rx_burstcount => avm_rx_burstcount_arb,
avm_rx_address => avm_rx_address_arb,
avm_rx_read => avm_rx_read_arb,
avm_rx_readdata => avm_rx_readdata_arb,
avm_rx_readdatavalid => avm_rx_readdatavalid_arb
avm_rx_burstcount0 => avm_rx_burstcount_arb,
avm_rx_address0 => avm_rx_address_arb,
avm_rx_read0 => avm_rx_read_arb,
avm_rx_readdata => avm_rx_readdata_arb,
avm_rx_readdatavalid => avm_rx_readdatavalid_arb
);
avm_rx_waitrequest <= avm_rx_waitrequest_arb;
avm_rx_readdata <= avm_rx_readdata_arb;
avm_rx_readdatavalid <= avm_rx_readdatavalid_arb;
);
end architecture;
end architecture;

View file

@ -3,6 +3,7 @@
"bus" : "csr",
"addr_hi_bit" : "5",
"addr_lo_bit" : "4",
"addr_width" : "4",
"description" : "This block is the print unit for the GMA SOM board soft IP",
"sub_blocks" : {
"generic_sequencer_15:a" : {
@ -16,9 +17,115 @@
"offset" : "0x10"
},
"generic_delay_queue_1" : {
"instance" : "",
"instance" : "0",
"process" : "enabled",
"offset" : "0x20"
},
"local" : {
"instance" : "",
"process" : "enabled",
"offset" : "0x30"
}
},
"registers" : {
"ip_id" : {
"address" : "0",
"width" : "32",
"description" : "Unique ID for this IP block",
"fields" : {
"ip_number" : {
"type" : "c",
"bit_len" : "8",
"reset" : "0x10",
"description" : "IP identifier number"
},
"mfr_number" : {
"type" : "c",
"bit_len" : "8",
"reset" : "0x06",
"description" : "Manufacturer number"
},
"reserved" : {
"type" : "rsv",
"bit_len" : "16",
"description" : "Reserved bits"
}
}
},
"ip_ver" : {
"address" : "1",
"width" : "32",
"description" : "Bits[7:0] = Minor version number, Bits[15:8] = Major version number, etc.",
"fields" : {
"minor_number" : {
"type" : "c",
"bit_len" : "8",
"reset" : "0x02",
"description" : "Minor number"
},
"major_number" : {
"type" : "c",
"bit_len" : "8",
"reset" : "0x00",
"description" : "Major number"
},
"reserved" : {
"type" : "rsv",
"bit_len" : "16",
"description" : "Reserved bits"
}
}
},
"fire_req_count0" : {
"address" : "5",
"type" : "r",
"width" : "32",
"reset" : "0x00",
"description" : "Fire request count for channel 0."
},
"fire_req_count1" : {
"address" : "6",
"type" : "r",
"width" : "32",
"reset" : "0x00",
"description" : "Fire request count for channel 1."
},
"fire_start_img_count0" : {
"address" : "7",
"type" : "r",
"width" : "32",
"reset" : "0x00",
"description" : "Start image count for channel 0."
},
"fire_start_img_count1" : {
"address" : "8",
"type" : "r",
"width" : "32",
"reset" : "0x00",
"description" : "Start image count for channel 1."
},
"last_stripe_count0" : {
"address" : "9",
"type" : "r",
"width" : "32",
"reset" : "0x00",
"description" : "Last stripe count for channel 0."
},
"last_stripe_count1" : {
"address" : "10",
"type" : "r",
"width" : "32",
"reset" : "0x00",
"description" : "Last stripe count for channel 1."
},
"chan_active" : {
"address" : "11",
"type" : "r",
"width" : "2",
"reset" : "0x00",
"description" : "Channel active state for pixel buffer inline-merge logic"
}
}
},

View file

@ -19,17 +19,21 @@
--! @li pixel_* : Pixel buffer write interface inputs
--! @li fire_* : Timing fire request input
--! @li stm8_trigger_rx : STM8 measurement trigger output
--! @li en_dual_data_path : Enable inline merge dual path (if configured for dual path)
--! @li seq_dac_data_* : DAC data output, muxed with adjacent head in parent to form DAC data output
--! @li wav_*_ext : External wave trigger input
--! @li chan_en : print channel enable input
--! @li bpp_mode : bits per pixel mode input
--! @li print_data_width : Select the print data with (number of active DIN shift inputs of head).
--! @li clear_buffer : Pixel buffer clear pulse signal input
--! @li empty : Data core empty status output
--! @li full : Data core full (with look-ahead) status output
--! @li overrun : Pixel buffer overrun error status
--! @li underrun : Pixel buffer underrun error status
--! @li fp_drop : Fire pulse drop seen
--! @li dbl_drop : Double fire pulse 'droppy' error status
--! @li overlap_error : In line merge overlap error flag
--! @li fire_* : Timing fire request input
--! @li clear_buffer : Pixel buffer clear pulse signal input
--! @li cpu_gl_map_en : Enable input for CPU control of GL mapping
--! @li cpu_gl_map : CPU value for GL mapping
@ -40,6 +44,9 @@
--! @li print_latch : LATCH control output to head
--! @li print_clk : CLK output to head
--! @li print_data : DATA output to head
--! @li diag_peek_* : Pixel buffer access interface
--! @li diag_word_* : Pixel buffer diagnostic word count
--! @li debug_out : Debug signal output port
--!
--! @b Clock-crossing considerations:
--! @li Module is a single clock domain synchronous block
@ -47,18 +54,18 @@
--! @b Language build standard requirements:
--! @li VHDL 2008
--!
--! @author Simon Southwell
--! @copyright (c) 2018 Global Inkjet Systems
--! @date 2018-1-10
--! @author Dave Steele
--! @copyright (c) 2024 Global Inkjet Systems
--! @date 2024-1-10
-------------------------------------------------------------------------------
-- altera vhdl_input_version vhdl_2008
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.common_pkg.all;
use work.pixel_buffer_2_pkg.all;
entity print_unit is
generic(
@ -68,74 +75,101 @@ entity print_unit is
MAX_OP_WIDTH : natural range 1 to 48 := 48;
MAX_BPP : integer := 3;
SHIFT_DEPTH : integer range 1 to 1024 := 128;
NO_ZERO_GAP : boolean := false;
EN_PEEK : boolean := false;
NUM_CHANS : integer range 1 to 4 := 2; -- number of PD inline-merge channels
PCLK_CLK_RATIO : integer range 1 to 32 := 8
);
port(
clk : in std_logic;
rst_n : in std_logic;
clk : in std_logic;
rst_n : in std_logic;
avs_csr_address : in std_logic_vector(5 downto 0);
avs_csr_write : in std_logic;
avs_csr_writedata : in std_logic_vector(31 downto 0);
avs_csr_read : in std_logic;
avs_csr_readdata : out std_logic_vector(31 downto 0);
avs_csr_address : in std_logic_vector( 5 downto 0);
avs_csr_write : in std_logic;
avs_csr_writedata : in std_logic_vector(31 downto 0);
avs_csr_read : in std_logic;
avs_csr_readdata : out std_logic_vector(31 downto 0);
avs_seq_address : in std_logic_vector(9 downto 0);
avs_seq_write : in std_logic;
avs_seq_writedata : in std_logic_vector(31 downto 0);
avs_seq_read : in std_logic;
avs_seq_readdata : out std_logic_vector(31 downto 0);
avs_seq_address : in std_logic_vector( 9 downto 0);
avs_seq_write : in std_logic;
avs_seq_writedata : in std_logic_vector(31 downto 0);
avs_seq_read : in std_logic;
avs_seq_readdata : out std_logic_vector(31 downto 0);
pixel_buf_wr : in std_logic;
pixel_buf_wr_data : in std_logic_vector(31 downto 0);
pixel_buf_rdy : out std_logic;
pixel_buf_wr : in std_logic;
pixel_buf_wr_data : in std_logic_vector(31 downto 0);
pixel_buf_rdy : out std_logic;
pixel_buf_last_word : in std_logic;
all_on_emul : in std_logic;
chan_en : in std_logic;
bpp_mode : in std_logic_vector(1 downto 0);
print_data_width : in std_logic_vector(5 downto 0);
clear_buffer : in std_logic;
empty : out std_logic;
full : out std_logic;
overrun : out std_logic;
underrun : out std_logic;
fp_drop : out std_logic;
dbl_drop : out std_logic;
pixel_buf_wr_aux : in std_logic;
pixel_buf_wr_data_aux : in std_logic_vector(31 downto 0);
pixel_buf_rdy_aux : out std_logic;
pixel_buf_last_word_aux : in std_logic;
fire_req : in std_logic;
fire_data : in std_logic_vector(7 downto 0);
en_dual_data_path : in std_logic;
all_on_emul : in std_logic;
chan_en : in std_logic;
bpp_mode : in std_logic_vector(1 downto 0);
print_data_width : in std_logic_vector(5 downto 0);
clear_buffer : in std_logic;
empty : out std_logic;
full : out std_logic;
overrun : out std_logic;
underrun : out std_logic;
fp_drop : out std_logic;
dbl_drop : out std_logic;
overlap_error : out std_logic;
cpu_gl_map : in std_logic_vector(7 downto 0);
cpu_gl_map_en : in std_logic;
px_buf_ch_nactive : out std_logic_vector(NUM_CHANS-1 downto 0);
cpu_data_start : in std_logic;
cpu_data_start_first : in std_logic;
cpu_data_start_last : in std_logic;
cpu_start_dly_head : in std_logic_vector(7 downto 0);
cpu_adc_meas : in std_logic;
fire_req : in std_logic;
fire_req_start_merge : in std_logic;
fire_data : in std_logic_vector( 7 downto 0);
stm8_trigger_rx : out std_logic;
sig_seq_force_dacs_0v : in std_logic;
dac_0v_value : in std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
cpu_gl_map : in std_logic_vector(7 downto 0);
cpu_gl_map_en : in std_logic;
cpu_fire_req_start_merge : in std_logic;
cpu_fire_req_pulse : in std_logic;
wave_req_ext : in std_logic;
wave_addr_ext : in std_logic_vector(7 downto 0);
wave_delay_ext : in std_logic_vector(11 downto 0);
cpu_start_seq_go : in std_logic;
cpu_start_seq_address : in std_logic_vector( 7 downto 0);
seq_dac_data : out std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
wave_seq_busy : out std_logic;
print_seq_busy : out std_logic;
cpu_data_start : in std_logic;
cpu_data_start_first : in std_logic;
cpu_data_start_last : in std_logic;
cpu_start_dly_head : in std_logic_vector(7 downto 0);
cpu_adc_meas : in std_logic;
print_clk : out std_logic_vector(0 downto 0);
print_data : out std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
stm8_trigger_rx : out std_logic;
sig_seq_force_dacs_0v : in std_logic;
dac_0v_value : in std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
print_all_on : out std_logic;
print_latch : out std_logic;
wave_req_ext : in std_logic;
wave_addr_ext : in std_logic_vector(7 downto 0);
wave_delay_ext : in std_logic_vector(11 downto 0);
diag_word_count : out std_logic_vector(6 downto 0);
seq_dac_data : out std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
wave_seq_busy : out std_logic;
print_seq_busy : out std_logic;
debug_out : out std_logic_vector(3 downto 0)
print_clk : out std_logic_vector(0 downto 0);
print_data : out std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
print_all_on : out std_logic;
print_latch : out std_logic;
diag_peek_sel : in std_logic;
diag_peek_addr : in std_logic_vector(31 downto 0);
diag_peek_data : out std_logic_vector(31 downto 0);
diag_peek_rdptr : out std_logic_vector( 7 downto 0);
diag_peek_wrptr : out std_logic_vector( 7 downto 0);
diag_peek_wdata : in std_logic_vector(31 downto 0);
diag_peek_wr : in std_logic;
diag_word_count : out std_logic_vector(6 downto 0);
debug_out : out std_logic_vector(3 downto 0)
);
end entity print_unit;
@ -159,29 +193,29 @@ architecture rtl of print_unit is
-- setting the GL mapping and the start bit with delay (sent via delay queue
-- in data core).
subtype GL_REMAP_BITS is natural range 7 downto 0;
constant GL_REMAP_UPDATE_BIT : integer := 8;
constant GL_REMAP_UPDATE_BIT : integer := 8;
subtype START_DLY_BITS is natural range START_DLY_WIDTH + 9 - 1 downto 9;
constant START_DLY_REQ_BIT : integer := START_DLY_WIDTH + 9;
constant START_DLY_FIRST_BIT : integer := START_DLY_WIDTH + 10;
constant START_DLY_LAST_BIT : integer := START_DLY_WIDTH + 11;
constant START_DLY_REQ_BIT : integer := START_DLY_WIDTH + 9;
constant START_DLY_FIRST_BIT : integer := START_DLY_WIDTH + 10;
constant START_DLY_LAST_BIT : integer := START_DLY_WIDTH + 11;
subtype RSVD_BITS is natural range START_DLY_WIDTH + 14 downto START_DLY_WIDTH + 12; -- @suppress "Unused declaration" : helps clarity
constant SEQ_BURST_WORD2_BIT : integer := START_DLY_WIDTH + 15;
constant SEQ_BUS_WIDTH : integer := START_DLY_WIDTH + 16;
constant SEQ_HOLD_OFF_SEL_BIT : integer := START_DLY_WIDTH + 15;
constant SEQ_BUS_WIDTH : integer := START_DLY_WIDTH + 16;
signal avs_csr_write_seq_wave : std_logic;
signal avs_csr_read_seq_wave : std_logic;
signal avs_csr_rdata_seq_wave : std_logic_vector(31 downto 0);
signal avs_csr_write_seq_wave : std_logic;
signal avs_csr_read_seq_wave : std_logic;
signal avs_csr_rdata_seq_wave : std_logic_vector(31 downto 0);
signal avs_seq_write_seq_wave : std_logic;
signal avs_seq_read_seq_wave : std_logic;
signal avs_seq_read_seq_wave_dly : std_logic;
signal avs_seq_rdata_seq_wave : std_logic_vector(31 downto 0);
signal avs_seq_rdata_seq_wave_int : std_logic_vector(31 downto 0);
signal avs_seq_write_seq_wave : std_logic;
signal avs_seq_read_seq_wave : std_logic;
signal avs_seq_read_seq_wave_dly : std_logic;
signal avs_seq_rdata_seq_wave : std_logic_vector(31 downto 0);
signal avs_seq_rdata_seq_wave_int : std_logic_vector(31 downto 0);
signal avs_csr_write_seq_print : std_logic;
signal avs_csr_read_seq_print : std_logic;
signal avs_csr_rdata_seq_print : std_logic_vector(31 downto 0);
signal avs_csr_write_seq_print : std_logic;
signal avs_csr_read_seq_print : std_logic;
signal avs_csr_rdata_seq_print : std_logic_vector(31 downto 0);
signal avs_seq_write_seq_print : std_logic;
signal avs_seq_read_seq_print : std_logic;
@ -189,65 +223,106 @@ architecture rtl of print_unit is
signal avs_seq_rdata_seq_print : std_logic_vector(31 downto 0);
signal avs_seq_rdata_seq_print_int : std_logic_vector(31 downto 0);
signal avs_csr_write_dly : std_logic;
signal avs_csr_read_dly : std_logic;
signal avs_csr_rdata_dly : std_logic_vector(31 downto 0);
signal wave_req_dly : std_logic;
signal wave_addr_dly : std_logic_vector(7 downto 0);
signal wave_req_dly : std_logic;
signal wave_addr_dly : std_logic_vector(7 downto 0);
signal vector_out : std_logic_vector(VECTOR_WIDTH - 1 downto 0);
signal stm8_trigger_rx_int : std_logic;
signal vector_out : std_logic_vector(VECTOR_WIDTH - 1 downto 0);
signal stm8_trigger_rx_int : std_logic;
signal trig_count : std_logic_vector(7 downto 0);
signal stm8_trigger_rx_int_d : std_logic;
signal trig_count : std_logic_vector(7 downto 0);
signal stm8_trigger_rx_int_d : std_logic;
signal wav_trigger_in : std_logic_vector(TRIGGER_WIDTH - 1 downto 0);
signal wav_trigger_in : std_logic_vector(TRIGGER_WIDTH - 1 downto 0);
signal vector_print : std_logic_vector(18 downto 0);
signal vector_print : std_logic_vector(18 downto 0);
signal wave_req : std_logic;
signal wave_addr : std_logic_vector(7 downto 0);
signal wave_delay : std_logic_vector(11 downto 0);
signal wave_req : std_logic;
signal wave_addr : std_logic_vector(7 downto 0);
signal wave_delay : std_logic_vector(11 downto 0);
signal wave_req_int : std_logic;
signal wave_addr_int : std_logic_vector(5 downto 0);
signal wave_delay_int : std_logic_vector(11 downto 0);
signal wave_req_int : std_logic;
signal wave_addr_int : std_logic_vector(5 downto 0);
signal wave_delay_int : std_logic_vector(11 downto 0);
signal seq_data_config : std_logic_vector(SEQ_BUS_WIDTH - 1 downto 0);
signal seq_data_valid : std_logic;
signal seq_data_ack : std_logic;
signal seq_data_config : std_logic_vector(SEQ_BUS_WIDTH - 1 downto 0);
signal seq_data_valid : std_logic;
signal seq_data_ack : std_logic;
signal seq_dac_data_int : std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
signal seq_dac_data_int : std_logic_vector(DAC_DATA_WIDTH - 1 downto 0);
signal seq_start_req_int : std_logic;
signal seq_start_first_pulse_int : std_logic;
signal seq_start_last_pulse_int : std_logic;
signal seq_start_delay_int : std_logic_vector(START_DLY_WIDTH - 1 downto 0);
signal seq_start_req_int : std_logic;
signal seq_start_req_first_int : std_logic;
signal seq_start_req_last_int : std_logic;
signal fire_req_held_off : std_logic;
signal sequencers_busy : std_logic;
signal seq_gl_map_update : std_logic;
signal seq_fp_holdoff_update : std_logic;
signal print_seq_trig : std_logic_vector(1 downto 0);
signal fire_req_int : std_logic;
signal sequencers_busy : std_logic;
signal print_seq_start : std_logic;
signal print_seq_start_addr : std_logic_vector( 8 downto 0);
signal pulse_count : std_logic_vector(11 downto 0);
signal pulse4096 : std_logic;
signal pulse_reset : std_logic;
signal pulse_reset_last : std_logic;
signal seq_gl_map_update : std_logic;
signal seq_fp_holdoff_update : std_logic;
signal print_seq_trig : std_logic_vector(1 downto 0);
signal print_data_i : std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
signal print_all_on_i : std_logic;
signal print_clk_i : std_logic_vector(0 downto 0);
signal allon_reg : std_logic_vector(3 downto 0);
signal allon_cnt : std_logic_vector(log2(SHIFT_DEPTH) + log2(PCLK_CLK_RATIO) downto 0);
signal allon_pclk : std_logic;
signal allon_mux : std_logic;
signal fire_req_int : std_logic;
signal fire_req_int_d : std_logic;
signal drop_stripe : std_logic;
signal fire_req_start_merge_int : std_logic;
signal delay_queue_write : std_logic;
signal delay_queue_read : std_logic;
signal delay_queue_readdata : std_logic_vector(31 downto 0);
signal local_write : std_logic;
signal local_read : std_logic;
signal local_readdata : std_logic_vector(31 downto 0);
signal chan_active : std_logic_vector(NUM_CHANS-1 downto 0);
signal pulse_count : std_logic_vector(11 downto 0);
signal pulse4096 : std_logic;
signal pulse_reset : std_logic;
signal pulse_reset_last : std_logic;
signal print_data_i : std_logic_vector(MAX_OP_WIDTH - 1 downto 0);
signal print_all_on_i : std_logic;
signal print_clk_i : std_logic_vector(0 downto 0);
signal allon_reg : std_logic_vector(3 downto 0);
signal allon_cnt : std_logic_vector(log2(SHIFT_DEPTH) + log2(PCLK_CLK_RATIO) downto 0);
signal allon_pclk : std_logic;
signal allon_mux : std_logic;
signal diag_fire_req_count : data_array_t(1 downto 0)(31 downto 0);
signal diag_fire_simg_count : data_array_t(1 downto 0)(31 downto 0);
signal diag_last_stripe_count : data_array_t(1 downto 0)(31 downto 0);
begin
-- -----------------------------------------------
-- Combinatorial logic
-- -----------------------------------------------
chan_active <= not px_buf_ch_nactive;
-- Place holder for debug signals
debug_out <= "00" & wave_req & wave_req_dly;
-- Merge fire request from FPM and from CPU registers
fire_req_int <= '1' when fire_req /= '0' or cpu_fire_req_pulse = '1' else '0';
drop_stripe <= (fire_req or cpu_fire_req_pulse) and sequencers_busy; -- Ensure pixel buffer and print sequencer are tied together to both drop or neither drop
fire_req_start_merge_int <= cpu_fire_req_start_merge when cpu_fire_req_pulse else fire_req_start_merge;
-- Merge sequencer start address from CPU registers and internal logic.
print_seq_start <= (fire_req_int or cpu_start_seq_go) and not sequencers_busy and not print_seq_busy;
print_seq_start_addr <= "0" & cpu_start_seq_address when cpu_start_seq_go else
"0" & fire_data;
-- Pulse creation from wave requests
-- Generate the update pulses for sequence state off of the print data sequencer's burst bus
seq_fp_holdoff_update <= seq_data_valid and seq_data_config(SEQ_HOLD_OFF_SEL_BIT);
seq_gl_map_update <= seq_data_valid and seq_data_config(GL_REMAP_UPDATE_BIT) and not seq_data_config(SEQ_HOLD_OFF_SEL_BIT);
-- Allow firing of data core from CPU if requested, else comes from the wave sequencer.
seq_start_req_int <= seq_data_config(START_DLY_REQ_BIT) when seq_data_valid = '1' and seq_data_config(SEQ_HOLD_OFF_SEL_BIT) = '0' else cpu_data_start;
seq_start_first_pulse_int <= (cpu_data_start and cpu_data_start_first) or (seq_data_config(START_DLY_FIRST_BIT) and seq_data_valid and not seq_data_config(SEQ_HOLD_OFF_SEL_BIT));
seq_start_last_pulse_int <= (cpu_data_start and cpu_data_start_last) or (seq_data_config(START_DLY_LAST_BIT) and seq_data_valid and not seq_data_config(SEQ_HOLD_OFF_SEL_BIT));
-- Make this constant, triggering on bit 0 all the time
wav_trigger_in <= std_logic_vector(to_unsigned(0, TRIGGER_WIDTH - 2)) & pulse4096 & '1';
@ -260,8 +335,29 @@ begin
print_latch <= vector_out(PRINT_LATCH_BIT);
pulse_reset <= vector_out(RESET_TICK_BIT);
-- Inject head clock cycles on rising edge of all_on, but only if all_on_emul(ation) is high
-- Assumption is that HMB will be operated with all_on_emul true, and waveform sequences setting
-- -----------------------------------------------
-- Hold fire requests
-- -----------------------------------------------
HOLD_FIRE_REQ: process (rst_n, clk)
begin
if rst_n = '0' then
fire_req_held_off <= '0';
fire_req_int_d <= '0';
elsif clk'event and clk = '1' then
fire_req_int_d <= fire_req_int;
if fire_req_int_d = '0' and fire_req_int = '1' then
fire_req_held_off <= '1';
elsif print_seq_start = '1' then
fire_req_held_off <= '0';
end if;
end if;
end process;
-- Inject head clock cycles on rising edge of all_on, but only if all_on_emul(ation) is high
-- Assumption is that HMB will be operated with all_on_emul true, and waveform sequences setting
-- print_all_on high at the end of each waveform to trigger loading of ones ready for any spitting that might be needed.
INJECT_ALLON : process(rst_n, clk)
begin
@ -346,16 +442,22 @@ begin
pulse4096 <= '0';
if unsigned(pulse_count) = 0 then
if unsigned(pulse_count) = 4095 then
pulse4096 <= '1';
end if;
end if;
end process;
-- -----------------------------------------------
-- CSR bus address decode
-- -----------------------------------------------
-- Auto-generated Avalon CSR bus decoder block
print_unit_csr_decode_1 : entity work.print_unit_csr_decode
port map(
print_unit_csr_decode_inst : entity work.print_unit_csr_decode
generic map (
ADDR_DECODE_HI_BIT => 5,
ADDR_DECODE_LO_BIT => 4
)
port map (
-- Decoded read/write strobes and returned read data
generic_sequencer_15_wav_write => avs_csr_write_seq_wave,
@ -366,11 +468,14 @@ begin
generic_sequencer_15_print_read => avs_csr_read_seq_print,
generic_sequencer_15_print_readdata => avs_csr_rdata_seq_print,
generic_delay_queue_1_write => avs_csr_write_dly,
generic_delay_queue_1_read => avs_csr_read_dly,
generic_delay_queue_1_readdata => avs_csr_rdata_dly,
generic_delay_queue_1_0_write => delay_queue_write,
generic_delay_queue_1_0_read => delay_queue_read,
generic_delay_queue_1_0_readdata => delay_queue_readdata,
-- Avalon CSR slave interface
local_write => local_write,
local_read => local_read,
local_readdata => local_readdata,
avs_address => avs_csr_address(5 downto 4),
avs_write => avs_csr_write,
avs_read => avs_csr_read,
@ -378,6 +483,35 @@ begin
);
-- -----------------------------------------------
-- Local registers
-- -----------------------------------------------
print_unit_csr_regs_inst : entity work.print_unit_csr_regs
generic map (
ADDR_DECODE_WIDTH => 4
)
port map (
-- Clock and reset
clk => clk,
rst_n => rst_n,
fire_req_count0 => diag_fire_req_count(0),
fire_req_count1 => diag_fire_req_count(1),
fire_start_img_count0 => diag_fire_simg_count(0),
last_stripe_count0 => diag_last_stripe_count(0),
fire_start_img_count1 => diag_fire_simg_count(1),
last_stripe_count1 => diag_last_stripe_count(1),
chan_active => chan_active,
avs_address => avs_csr_address(3 downto 0),
avs_write => local_write,
avs_writedata => avs_csr_writedata,
avs_read => local_read,
avs_readdata => local_readdata
);
-- Auto-generated Avalon SEQ bus decoder block
print_unit_seq_decode_1 : entity work.print_unit_seq_decode
port map(
@ -398,12 +532,14 @@ begin
print_seq_trig <= vector_out(PRINT_LATCH_BIT) & '1';
-- Mask the fire request to the print data sequencer when a current sequence can't accept a new one
fire_req_int <= fire_req and not sequencers_busy;
-- -----------------------------------------------
-- instantiate a print sequencer
-- -----------------------------------------------
seq_print_core_inst : entity work.generic_sequencer_15
generic map(
SEQ_DEPTH => 512,
BUS_WIDTH => SEQ_BUS_WIDTH,
VECTOR_WIDTH => 19,
TRIGGER_WIDTH => 2,
@ -425,14 +561,14 @@ begin
avs_csr_read => avs_csr_read_seq_print,
avs_csr_readdata => avs_csr_rdata_seq_print,
avs_seq_address => avs_seq_address(7 downto 0),
avs_seq_address => avs_seq_address(8 downto 0),
avs_seq_write => avs_seq_write_seq_print,
avs_seq_writedata => avs_seq_writedata,
avs_seq_read => avs_seq_read_seq_print,
avs_seq_readdata => avs_seq_rdata_seq_print_int,
start_req => fire_req_int,
start_addr => fire_data,
start_req => print_seq_start,
start_addr => print_seq_start_addr,
trigger_in => print_seq_trig,
pos_in => (others => '0'),
@ -479,10 +615,10 @@ begin
reset_n => rst_n,
avs_address => avs_csr_address(3 downto 0),
avs_write => avs_csr_write_dly,
avs_write => delay_queue_write,
avs_writedata => avs_csr_writedata,
avs_read => avs_csr_read_dly,
avs_readdata => avs_csr_rdata_dly,
avs_read => delay_queue_read,
avs_readdata => delay_queue_readdata,
-- Incoming signals and packets to be delayed
ingress_valid => wave_req,
@ -548,62 +684,83 @@ begin
avs_seq_rdata_seq_wave <= avs_seq_rdata_seq_wave_int when avs_seq_read_seq_wave_dly = '1' else (others => '0');
-- Allow firing of data core from CPU if requested, else comes from the wave sequencer.
seq_start_req_int <= cpu_data_start or (seq_data_valid and seq_data_config(START_DLY_REQ_BIT) and not seq_data_config(SEQ_BURST_WORD2_BIT));
seq_start_req_first_int <= (cpu_data_start and cpu_data_start_first) or seq_data_config(START_DLY_FIRST_BIT);
seq_start_req_last_int <= (cpu_data_start and cpu_data_start_last) or seq_data_config(START_DLY_LAST_BIT);
seq_start_delay_int <= "00" & cpu_start_dly_head when cpu_data_start = '1' else seq_data_config(START_DLY_BITS);
seq_gl_map_update <= seq_data_valid and seq_data_config(GL_REMAP_UPDATE_BIT) and not seq_data_config(SEQ_BURST_WORD2_BIT);
seq_fp_holdoff_update <= seq_data_valid and seq_data_config(SEQ_BURST_WORD2_BIT);
-- -----------------------------------------------
-- Instantiate the data core
-- -----------------------------------------------
data_core_1 : entity work.data_core
generic map(
MAX_BPP => MAX_BPP,
MAX_OP_WIDTH => MAX_OP_WIDTH,
DELAY_WIDTH => START_DLY_WIDTH
DELAY_WIDTH => START_DLY_WIDTH,
NO_ZERO_GAP => NO_ZERO_GAP,
EN_PEEK => EN_PEEK,
NUM_CHANS => NUM_CHANS
)
port map(
clk => clk,
rst_n => rst_n,
clk => clk,
rst_n => rst_n,
pixel_buf_wr => pixel_buf_wr,
pixel_buf_wr_data => pixel_buf_wr_data,
pixel_buf_rdy => pixel_buf_rdy,
pixel_buf_wr => pixel_buf_wr,
pixel_buf_wr_data => pixel_buf_wr_data,
pixel_buf_rdy => pixel_buf_rdy,
pixel_buf_last_word => pixel_buf_last_word,
chan_en => chan_en,
bpp_mode => bpp_mode,
print_data_width => print_data_width,
clear_buffer => clear_buffer,
pixel_buf_wr_aux => pixel_buf_wr_aux,
pixel_buf_wr_data_aux => pixel_buf_wr_data_aux,
pixel_buf_rdy_aux => pixel_buf_rdy_aux,
pixel_buf_last_word_aux => pixel_buf_last_word_aux,
fire_req => fire_req,
sequencers_busy => sequencers_busy,
fp_holdoff_update => seq_fp_holdoff_update,
wave_seq_len => seq_data_config(15 downto 0),
en_dual_data_path => en_dual_data_path,
chan_en => chan_en,
bpp_mode => bpp_mode,
print_data_width => print_data_width,
clear_buffer => clear_buffer,
cpu_gl_map => cpu_gl_map,
cpu_gl_map_en => cpu_gl_map_en,
fire_req => fire_req,
fire_req_start_merge => fire_req_start_merge_int,
drop_stripe => drop_stripe,
sequencers_busy => sequencers_busy,
px_buf_ch_nactive => px_buf_ch_nactive,
fp_holdoff_update => seq_fp_holdoff_update,
seq_data_config => seq_data_config(15 downto 0),
empty => empty,
full => full,
underrun => underrun,
overrun => overrun,
dbl_drop => dbl_drop,
fp_drop => fp_drop,
cpu_gl_map => cpu_gl_map,
cpu_gl_map_en => cpu_gl_map_en,
seq_start_req => seq_start_req_int,
seq_start_first_pulse => seq_start_req_first_int,
seq_start_last_pulse => seq_start_req_last_int,
seq_start_delay => seq_start_delay_int,
empty => empty,
full => full,
underrun => underrun,
overrun => overrun,
dbl_drop => dbl_drop,
overlap_error => overlap_error,
fp_drop => fp_drop,
seq_gl_map => seq_data_config(GL_REMAP_BITS),
seq_gl_map_update => seq_gl_map_update,
seq_start_req => seq_start_req_int,
seq_start_first_pulse => seq_start_first_pulse_int,
seq_start_last_pulse => seq_start_last_pulse_int,
print_data => print_data_i,
print_clk => print_clk_i,
seq_gl_map => seq_data_config(GL_REMAP_BITS),
seq_gl_map_update => seq_gl_map_update,
diag_word_count => diag_word_count
all_on => '0',
print_data => print_data_i,
print_clk => print_clk_i,
diag_peek_sel => diag_peek_sel,
diag_peek_addr => diag_peek_addr,
diag_peek_data => diag_peek_data,
diag_peek_rdptr => diag_peek_rdptr,
diag_peek_wrptr => diag_peek_wrptr,
diag_peek_wdata => diag_peek_wdata,
diag_peek_wr => diag_peek_wr,
diag_fire_req_count => diag_fire_req_count,
diag_fire_simg_count => diag_fire_simg_count,
diag_last_stripe_count => diag_last_stripe_count,
diag_word_count => diag_word_count
);
@ -639,4 +796,4 @@ begin
end process;
end rtl;
end rtl;

View file

@ -1,9 +1,8 @@
-------------------------------------------------------------------------------
--! @file
--! @brief PWM with specifiable perio (in clk ticks), and control granularity of 1/256
--! @brief Pulse width modulator
--!
--! @details See
--! https://confluence.gisapps.co.uk/pages/viewpage.action?spaceKey=GMAHMB&title=HMB-FD-GMA+Design+Documentation
--! @details PWM with specifiable period (in clk ticks), and control granularity of 1/256
--!
--! @b Clock/resets:
--! @li clk : nominally 100MHz
@ -21,17 +20,14 @@
--! @li VHDL 2008
--!
--! @author Simon Southwell
--! @copyright (c) 2018 Global Inkjet Systems
--! @date 2018-9-20
--! @copyright (c) 2020 Global Inkjet Systems
--! @date 2020-3-20
-------------------------------------------------------------------------------
-- altera vhdl_input_version vhdl_2008
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_misc.all;
use work.pkg_functions.all;
entity pwm is
port(
@ -69,13 +65,11 @@ begin
elsif clk'event and clk = '1' then
-- If the phase count reaches 1/256th of period, reset to 0 and increment the phase number
if unsigned(mod_val) /= 0 then
if unsigned(phase_count) = (unsigned(period_div256) - 1) then
phase_count <= (others => '0');
phase <= std_logic_vector(unsigned(phase) + 1);
else
phase_count <= std_logic_vector(unsigned(phase_count) + 1);
end if;
if unsigned(phase_count) = (unsigned(period_div256) - 1) then
phase_count <= (others => '0');
phase <= std_logic_vector(unsigned(phase) + 1);
else
phase_count <= std_logic_vector(unsigned(phase_count) + 1);
end if;
-- If the phase number is less than the specified modulation value, set

View file

@ -510,10 +510,10 @@ set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to hps_sdio_D7
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to hps_sdio_CLK
# I2C
set_location_assignment PIN_C19 -to SDA_SOM
set_location_assignment PIN_A21 -to SDA_APP
set_location_assignment PIN_B16 -to SCL_SOM
set_location_assignment PIN_K18 -to SCL_APP
set_location_assignment PIN_C19 -to SDA_APP
set_location_assignment PIN_A21 -to SDA_SOM
set_location_assignment PIN_B16 -to SCL_APP
set_location_assignment PIN_K18 -to SCL_SOM
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SCL_SOM
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDA_SOM

View file

@ -315,6 +315,7 @@
internal="hps_0.spim0_sclk_out"
type="clock"
dir="start" />
<interface name="i2c" internal="core_0.i2c" type="conduit" dir="end" />
<interface name="hv_clk" internal="core_0.hv_clk" type="conduit" dir="end" />
<interface name="lvds_rx" internal="core_0.lvds_rx" />
<interface name="lvds_tx" internal="core_0.lvds_tx" type="conduit" dir="end" />

View file

@ -26,4 +26,8 @@ set_clock_groups -asynchronous -group [get_clocks {top_system_1|pll_0|altera_pll
set_clock_groups -asynchronous -group [get_clocks {top_system_1|pll_0|altera_pll_i|general[1].gpll~PLL_OUTPUT_COUNTER|divclk}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|pll_1|altera_pll_i|general[0].gpll~PLL_OUTPUT_COUNTER|divclk}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|hps_0|fpga_interfaces|peripheral_spim0|sclk_out}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|hps_0|fpga_interfaces|peripheral_i2c1|out_clk}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|hps_0|fpga_interfaces|peripheral_i2c1|out_clk}] -group [get_clocks {virtual_ext_clk_1MHz}]
# False path from I2C clock to out to back in again
set_false_path -from {top_system_1|hps_0|fpga_interfaces|peripheral_i2c0|out_clk} -to {top_system:top_system_1|core:core_0|i2c_stat_d[*]}
set_false_path -from {top_system_1|hps_0|fpga_interfaces|peripheral_i2c1|out_clk} -to {top_system:top_system_1|core:core_0|i2c_stat_d[*]}

View file

@ -0,0 +1,51 @@
###################################################################
# Makefile for SoM logic synthesis
#
# Copyright (c) 2020 Global Inkjet Systems
#
###################################################################
SYSTOPNAME = top
HPSNAME = hps_0
OPFILEDIR = output_files
QPFFILE = ${SYSTOPNAME}.qpf
QSYSFILE = ${SYSTOPNAME}_system.qsys
FPGATYPE = "Cyclone V"
FPGAPART = 5CSEBA4U23C7
MAKE_EXE = mingw32-make
all: autobuild hps synth
${SYSTOPNAME}_system.sopcinfo:
@qsys-generate ${QSYSFILE} --synthesis=VHDL --output-directory=${SYSTOPNAME} --family=${FPGATYPE} --part=${FPGAPART}
${HPSNAME}.h: ${SYSTOPNAME}_system.sopcinfo
@bash -c "sopc-create-header-files ${SYSTOPNAME}_system.sopcinfo --single ${HPSNAME}.h --module ${HPSNAME}"
synth: ${SYSTOPNAME}_system.sopcinfo
@quartus_sh --flow compile ${QPFFILE}
@cat ${OPFILEDIR}/${SYSTOPNAME}.sta.rpt | grep "Info" | grep -v "Worst case slack is "
qsys : ${SYSTOPNAME}_system.sopcinfo
hps: ${HPSNAME}.h
.PHONY: autobuild
autobuild:
@${MAKE_EXE} -C ..\src\test autobuild
clean:
@${MAKE_EXE} -C ..\src\test clean
@rm -rf .qsys_edit db hps_isw_handoff incremental_db ${SYSTOPNAME} c5_pin_model_dump.txt *.csv *.qws *.sopcinfo
@rm -rf ${OPFILEDIR}/*.rpt \
${OPFILEDIR}/*.done \
${OPFILEDIR}/*.smsg \
${OPFILEDIR}/*.summary \
${OPFILEDIR}/*.jdi \
${OPFILEDIR}/*.pin \
${OPFILEDIR}/*.rbf \
${OPFILEDIR}/*.sof \
${OPFILEDIR}/*.sld
@rm -rf ${HPSNAME}.h

View file

@ -26,9 +26,9 @@
# Notes:
#
# 1) The default values for assignments are stored in the file:
# top_assignment_defaults.qdf
# top_assignment_defaults.qdf
# If this file doesn't exist, see file:
# assignment_defaults.qdf
# assignment_defaults.qdf
#
# 2) Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus Prime software
@ -42,7 +42,7 @@ set_global_assignment -name DEVICE 5CSEBA4U23C7
set_global_assignment -name TOP_LEVEL_ENTITY top
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 16.0.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "12:02:26 MAY 23, 2017"
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Standard Edition"
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 SP0.18std Standard Edition"
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
@ -184,6 +184,7 @@ set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[11]
set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[12] -tag __hps_sdram_p0
set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[13] -tag __hps_sdram_p0
set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[14] -tag __hps_sdram_p0
set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[15] -tag __hps_sdram_p0
set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[1] -tag __hps_sdram_p0
set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[2] -tag __hps_sdram_p0
set_instance_assignment -name IO_STANDARD "SSTL-15 CLASS I" -to memory_mem_a[3] -tag __hps_sdram_p0
@ -311,6 +312,7 @@ set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_mem_a[12] -tag __hps_sdram_p0
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_mem_a[13] -tag __hps_sdram_p0
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_mem_a[14] -tag __hps_sdram_p0
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_mem_a[15] -tag __hps_sdram_p0
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_mem_a[1] -tag __hps_sdram_p0
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_mem_a[2] -tag __hps_sdram_p0
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to memory_mem_a[3] -tag __hps_sdram_p0
@ -336,6 +338,7 @@ set_location_assignment PIN_A25 -to memory_mem_ras_n
set_location_assignment PIN_G25 -to memory_mem_ba[2]
set_location_assignment PIN_H25 -to memory_mem_ba[1]
set_location_assignment PIN_A27 -to memory_mem_ba[0]
set_location_assignment PIN_F24 -to memory_mem_a[15]
set_location_assignment PIN_G23 -to memory_mem_a[14]
set_location_assignment PIN_C24 -to memory_mem_a[13]
set_location_assignment PIN_D24 -to memory_mem_a[12]
@ -491,10 +494,10 @@ set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to hps_sdio_D7
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to hps_sdio_CLK
# I2C
set_location_assignment PIN_C19 -to SDA_SOM
set_location_assignment PIN_A21 -to SDA_APP
set_location_assignment PIN_B16 -to SCL_SOM
set_location_assignment PIN_K18 -to SCL_APP
set_location_assignment PIN_C19 -to SDA_APP
set_location_assignment PIN_A21 -to SDA_SOM
set_location_assignment PIN_B16 -to SCL_APP
set_location_assignment PIN_K18 -to SCL_SOM
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SCL_SOM
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDA_SOM
@ -831,4 +834,4 @@ set_global_assignment -name SDC_FILE ./top_system_timing.sdc
set_global_assignment -name CDF_FILE ./output_files/Chain1.cdf
set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS ON
set_global_assignment -name NUM_PARALLEL_PROCESSORS 5
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top

View file

@ -7,7 +7,7 @@
description=""
tags=""
categories="System" />
<parameter name="bonusData"><![CDATA[bonusData
<parameter name="bonusData"><![CDATA[bonusData
{
element clk_0
{
@ -315,6 +315,7 @@
internal="hps_0.spim0_sclk_out"
type="clock"
dir="start" />
<interface name="i2c" internal="core_0.i2c" type="conduit" dir="end" />
<interface name="hv_clk" internal="core_0.hv_clk" type="conduit" dir="end" />
<interface name="lvds_rx" internal="core_0.lvds_rx" />
<interface name="lvds_tx" internal="core_0.lvds_tx" type="conduit" dir="end" />
@ -349,8 +350,10 @@
<parameter name="LVDS_TX_CHANS" value="16" />
<parameter name="MAX_HEADS" value="4" />
<parameter name="MAX_OP_WIDTH" value="32" />
<parameter name="NO_ZERO_GAP" value="true" />
<parameter name="NUM_DDR" value="1" />
<parameter name="NUM_HEADS" value="4" />
<parameter name="SEB_EPD_ENABLE" value="true" />
<parameter name="NUM_LVDS_DDR" value="1" />
<parameter name="NUM_LVDS_RX_PIO" value="1" />
<parameter name="NUM_LVDS_TX_PIO" value="30" />
@ -362,6 +365,7 @@
<parameter name="TRIGGER_WIDTH" value="16" />
<parameter name="TX_SERDES_RATIO" value="7" />
<parameter name="VECTOR_WIDTH" value="18" />
<parameter name="STREAMER_LOGGER" value="false" />
</module>
<module
name="generic_versioning_0"
@ -605,7 +609,7 @@
<parameter name="MEM_NUMBER_OF_RANKS_PER_DIMM" value="1" />
<parameter name="MEM_PD" value="DLL off" />
<parameter name="MEM_RANK_MULTIPLICATION_FACTOR" value="1" />
<parameter name="MEM_ROW_ADDR_WIDTH" value="15" />
<parameter name="MEM_ROW_ADDR_WIDTH" value="16" />
<parameter name="MEM_RTT_NOM" value="RZQ/6" />
<parameter name="MEM_RTT_WR" value="Dynamic ODT off" />
<parameter name="MEM_SRT" value="Normal" />

View file

@ -7,7 +7,7 @@ create_clock -name LVDS_TX_SER_CLK -period 10.00 [get_ports TX_P[16]]
derive_pll_clocks
# The fire pulse manager receiver clock is asynchronous to the system clock
# The fire pulse manager receiver clock is asynchronous to the system clock
set_clock_groups -asynchronous -group [get_clocks {top_system_1|pll_0|altera_pll_i|general[0].gpll~PLL_OUTPUT_COUNTER|divclk}] -group [get_clocks {top_system_1|pll_1|altera_pll_i|general[0].gpll~PLL_OUTPUT_COUNTER|divclk}]
create_clock -period 1000.0 -name virtual_ext_clk_1MHz ; # This is a virtual clock, because it's not relative to any internal clock
@ -26,4 +26,19 @@ set_clock_groups -asynchronous -group [get_clocks {top_system_1|pll_0|altera_pll
set_clock_groups -asynchronous -group [get_clocks {top_system_1|pll_0|altera_pll_i|general[1].gpll~PLL_OUTPUT_COUNTER|divclk}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|pll_1|altera_pll_i|general[0].gpll~PLL_OUTPUT_COUNTER|divclk}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|hps_0|fpga_interfaces|peripheral_spim0|sclk_out}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|hps_0|fpga_interfaces|peripheral_i2c1|out_clk}] -group [get_clocks {virtual_ext_clk_1MHz}]
set_clock_groups -asynchronous -group [get_clocks {top_system_1|hps_0|fpga_interfaces|peripheral_i2c1|out_clk}] -group [get_clocks {virtual_ext_clk_1MHz}]
# False path from I2C clock to out to back in again
set_false_path -from {top_system_1|hps_0|fpga_interfaces|peripheral_i2c0|out_clk} -to {top_system:top_system_1|core:core_0|i2c_stat_d[*]}
set_false_path -from {top_system_1|hps_0|fpga_interfaces|peripheral_i2c1|out_clk} -to {top_system:top_system_1|core:core_0|i2c_stat_d[*]}
set quartus_exe $::TimeQuestInfo(nameofexecutable)
if { $quartus_exe == "quartus_fit" } {
post_message -type info "Over constraining hold"
set_clock_uncertainty 0.30 -add -hold -enable_same_physical_edge \
-from [get_clocks {top_system_1|pll_0|altera_pll_i|general[0].gpll~PLL_OUTPUT_COUNTER|divclk}] -to [get_clocks {top_system_1|pll_0|altera_pll_i|general[0].gpll~PLL_OUTPUT_COUNTER|divclk}]
}

View file

@ -491,10 +491,10 @@ set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to hps_sdio_D7
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to hps_sdio_CLK
# I2C
set_location_assignment PIN_C19 -to SDA_SOM
set_location_assignment PIN_A21 -to SDA_APP
set_location_assignment PIN_B16 -to SCL_SOM
set_location_assignment PIN_K18 -to SCL_APP
set_location_assignment PIN_C19 -to SDA_APP
set_location_assignment PIN_A21 -to SDA_SOM
set_location_assignment PIN_B16 -to SCL_APP
set_location_assignment PIN_K18 -to SCL_SOM
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SCL_SOM
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SDA_SOM

View file

@ -315,6 +315,7 @@
internal="hps_0.spim0_sclk_out"
type="clock"
dir="start" />
<interface name="i2c" internal="core_0.i2c" type="conduit" dir="end" />
<interface name="hv_clk" internal="core_0.hv_clk" type="conduit" dir="end" />
<interface name="lvds_rx" internal="core_0.lvds_rx" />
<interface name="lvds_tx" internal="core_0.lvds_tx" type="conduit" dir="end" />

Some files were not shown because too many files have changed in this diff Show more