Commit graph

  • a6f69bd7ca 1) Revsion changed to 7A. Where the letter is used for minor revisoins 2) Changes to head_data_proc.vhd to implement proper clocking of data. The data is not DDR. It gets registered on falling edge 3) The EPROM block is the EPSON. It is left there to be changed for an standard EPROM 0.9.8_J961 David Rodriguez 2024-09-13 16:09:28 +01:00
  • bfe6acaaac 1) Implemation of latch_count and signature. There was a problem with head_data_proc.vhd because it did not have acrl 2) tb has been modified to test the data. Printdata s coming from core 3) VUserMain0.cpp modified David Rodriguez 2024-08-30 18:14:15 +01:00
  • 88f08392d2 1) This version has the top level modifies with the printhead signals 2) Tb.pkg has been modified 3) head_data_proc.vhd has been modified but not simulated to test signature and latch count 4) pei_fpga_top.vhd must be cleaned. It has code from d3000 that is not required 5) head_datain has been added to account for the ddr printhead data. David Rodriguez 2024-08-27 17:39:20 +01:00
  • 81a4182c87 1) This commit does not run. It has the head_proc modified David Rodriguez 2024-08-26 14:44:44 +01:00
  • 1449b2a699 1) added pin data file 2) modified mcp4631 to accept i2c_address 3) runtest moified with right i2c addres for the mcp4631 test bench David Rodriguez 2024-08-24 21:19:30 +01:00
  • 375512a5d5 Working on generic i2cfpga implementation. This version can talk to mcp4631 and stm8. It has some extra registers to send i2c device address and number of byte during a write. Read transactions are fixed to two bytes. This version simulate and does not require a delay to reach the end of the transaction. The mcp4631_tb does report the read of the register. Howver, it has been used as an end-point to exercise the simulation. David Rodriguez 2024-08-21 09:16:52 +01:00
  • f688331a20 1) added ADRR_STM8_W_NBYTES (#14) and wr_nbytes register to change the fram legnth of i2c master event 2) runTest.cpp added w0e to change register value from 1 (default) to 14 in hex David Rodriguez 2024-08-16 21:26:51 +01:00
  • af4415ebe3 1) included mcp4631.vhd and mcp4631_tb.vhd 2)simple_i2c_masterPEI.v included. This version solved the problem of the second byte during a read to hold the sda line to zero 3)this version has the simple_i2c_slave_emprom of d3000. It has to be modified to have a proper Eprom 4) test.json modified to include the pei register and the i2c peripherals 5) testbench files modified: runTest.h;runTestLocal.h; VUserMain0.cpp; and runTest.cpp David Rodriguez 2024-08-15 20:10:27 +01:00
  • 3cb482d856 1) Added pei-se-d3000 V6 to pei-sd-sg1024 David Rodriguez 2024-03-27 11:22:39 +00:00
  • 5c3d713af8 HMBFDHV-1007. Fix bytes written being incorrect and add a trigger now option for software test 0.9.8 David Steele 2024-03-18 14:34:17 +00:00
  • 2115d9b5e0 HMBFDHV-1007. Simulates now David Steele 2024-03-14 16:43:18 +00:00
  • 7f9708d22a Update to latest EL GIP David Steele 2024-03-14 14:32:14 +00:00
  • 6a02e8f52a HMBFDHV-1002. Add debug_wr_if so JB can get software building. (Debug_wr_if does not work in this version - everything else does) David Steele 2024-03-14 14:27:53 +00:00
  • 9306eb9492 HMBFDHV-1004. Fix timing David Steele 2024-03-14 10:39:34 +00:00
  • 2d5b5b53af HMBFDHV-1004. Make clear bits work per head David Steele 2024-03-14 09:09:09 +00:00
  • e8aeee478e HMBFDHV-1004. Add counters to detect if printing non zero David Steele 2024-03-13 16:11:46 +00:00
  • 198801a123 HMBFDHV-1002. Change debug outputs to be useful. Also added hmb_fpga to test bench (no functional change) David Steele 2024-03-11 13:28:09 +00:00
  • 72f101ce49 HMBFDHV-985. Make shutdown signal turn off the head heaters David Steele 2024-02-29 16:59:04 +00:00
  • 7732464c0b Merge branch '0.9.8' of hydra.corp.globalinkjetsystems.com:GIS_Embedded_Logic/hmb-fd-sg1024 into 0.9.8 David Steele 2024-02-28 17:08:44 +00:00
  • 5a90ab930d No Functional Change. Make comments clearer David Steele 2024-02-28 17:08:27 +00:00
  • 371b3e9b35 HMBFDHV-973. Add test to check Print Unit CSR registers read back correctly David Steele 2024-02-21 14:11:51 +00:00
  • b6c81139a0 HMBFDHV-973. Make print unit registers read properly David Steele 2024-02-21 13:52:57 +00:00
  • 855dd6063a Fix hold timing David Steele 2024-01-31 15:23:39 +00:00
  • defe456d26 Fix hold timing David Steele 2024-01-31 15:23:23 +00:00
  • fcebf9e37e Try a different seed as 0.049 ns off timing David Steele 2024-01-31 14:45:24 +00:00
  • 26d5c96119 HMBFDHV-977. Add support for BA4 with inline merge disabled. Chip fits and tests pass David Steele 2024-01-31 12:02:02 +00:00
  • 4833f56398 HMBFDHV-977. All tests pass David Steele 2024-01-31 11:37:13 +00:00
  • e526e62dc6 HMBFDHV-977. Fix multi_heads_test (allow print_data_width through to pixel buffer). Remove unused signals. Add Scratch debug reg David Steele 2024-01-31 11:27:54 +00:00
  • cde8ca2d9d HMBFDHV-977. Data core and print streamer tests pass David Steele 2024-01-30 13:22:35 +00:00
  • a1094be237 HMBFDHV-977. Update to latest EL GIP David Steele 2024-01-29 16:41:26 +00:00
  • 21e396ffb3 HMBFDHV-977. Compiles. Passes Avalon Bus test David Steele 2024-01-29 16:35:54 +00:00
  • 5583da6e21 HMBFDHV-977. Starting to compile David Steele 2024-01-26 16:45:47 +00:00
  • c62ec3649a HMBFDHV-977. Update after mega merge David Steele 2024-01-26 13:39:10 +00:00
  • 45ab8e5cef HMBFDHV-973. Enable BA4 for 2G RAM David Steele 2024-01-18 13:38:53 +00:00
  • 920bb7a495 HMBFDHV-973. Update SG1024 0.9.6 to 2GB RAM ability David Steele 2024-01-02 13:43:34 +00:00
  • 99d36dcacb HMBFDHV-878 HMBFDHV-879 HMBFDHV-880. Add SOM I2C control and status. Swap incorrect SOM and APP labels in vhdl. Change HMB fpga to autogenerated registers *** Note has to move the base address of the head monitors So - Old H0 - 0x40, 0x50, 0x60, H3 - 0x70 New H0 - 0x20, 0x40, 0x60, H3 - 0x80 David Steele 2022-11-25 14:26:22 +00:00
  • 777e3ea5ca HMBFDHV-832 updated shutdnmonutils.h in an attempt to fix the failure we now get. Test fails - but not sure why master Damian Smith 2022-07-13 15:20:19 +01:00
  • 936344fe3f HMBFDHV-832 renamed signals in print_unit for clarity. TEMPORARY: changed pTests in VUserMain0.cpp and runtest.h to include shutdown. Added waveform to allow an allon test that uses the sequencer Damian Smith 2022-07-12 10:57:32 +01:00
  • 3075ee2843 HMBFDHV-832 add another test to the all_on_emul to work without dynamic combine (i.e. no superhead) Damian Smith 2022-07-07 18:13:54 +01:00
  • 6db2748ca1 HMBFDHV-711 update files for C7 device and add makefile Damian Smith 2021-10-21 16:00:26 +01:00
  • 89c72bddb4 HMBFDHV-711 Rename folder Damian Smith 2021-10-21 15:55:33 +01:00
  • 1df66e5895 CORE-297 HMBFDHV-572 Group D Red LED should reflect wd event Damian Smith 2021-08-25 17:40:50 +01:00
  • f377600257 CORE-297 HMBFDHV-572 Corrected pin mappings for led signals Damian Smith 2021-08-10 10:46:45 +01:00
  • 908312a8d9 HMBFDHV-655 Removed generic_lvds_rx_1 reference from .json and core.vhd as it was addressing a block that isn't present in the design. Damian Smith 2021-08-05 15:07:50 +01:00
  • 4ab76e9423 First pass at FC5 support Damian Smith 2021-08-05 11:12:25 +01:00
  • 2351a42261 CORE-297 HMBFDHV-572 Update BA6 folder Damian Smith 2021-08-05 10:38:05 +01:00
  • 24e88ddcf2 CORE-297 HMBFDHV-572 Update BA4 folder Damian Smith 2021-08-05 10:07:22 +01:00
  • 72347558d0 CORE-297 HMBFDHV-572 Move Group D LED control to PIO block with overrides by wd_alarm. Incremented Core minor version number Damian Smith 2021-08-04 16:26:10 +01:00
  • 3c01f9aa88 CORE-297 HMBFDHV-572 Bringing WD up to top level to control the Group D LEDs Damian Smith 2021-08-03 18:29:52 +01:00
  • d3e7eb0892 HMBFDHV-656 enabled .htm generation for enc_pd_emul_1 in core.json Damian Smith 2021-08-03 15:09:57 +01:00
  • 5c220f95f4 HMBFDHV-659 Report all data_streamer versions correctly. (Incremented CORE minor version to reflect this change, and the updated use of generic ip) Damian Smith 2021-08-03 14:52:20 +01:00
  • cdae705dfe ELGIP-154 - updating to more recent dev tools while fixing the data-streamer issue Damian Smith 2021-08-03 11:24:37 +01:00
  • 454ced560f Merge remote-tracking branch 'remotes/origin/master' into 0.9.6 Damian Smith 2021-08-03 10:03:34 +01:00
  • 81134a80f3 ELGIP-154 - upgrade to latest data_streamer and other generic_ip code to pick up other improvements Damian Smith 2021-08-03 09:28:26 +01:00
  • b66f052b62 CORE-370 fixes for vptest.py Christos Spirotis 2021-06-15 10:25:32 +01:00
  • 92d4d3f5f1 HMBFDHV-425 Switched over to streamer_fifo_0.vhd by following changes on SG600 Damian Smith 2020-11-13 18:07:48 +00:00
  • 7c3fd7aa7d HMBFDHV-388 Added core register to control ticks per period of heater PSU PWM, and defaulted to 10KHz. Incremented core version and sysid. Fixed non-standard Modelsim reference in makefile Simon Southwell 2020-10-09 07:04:46 +01:00
  • e6b3ee5f53 HMBFDHV-375 HMBFDHV-388 correct wrong tag reference in set_project_variables.gsh Simon Southwell 2020-02-21 13:29:13 +00:00
  • 1461f1f660 HMBFDHV-375 HMBFDHV-388 Update to point at a newer tag of repos Damian Smith 2020-02-21 12:45:32 +00:00
  • 6e537e5656 HMBFDHV-375 HMBFDHV-388 Updated the warning suppression files. Changed the seed to get around a timing problem Damian Smith 2020-02-21 12:33:02 +00:00
  • 380bd8fea2 HMBFDHV-375 fixed bug in fifo_queue that caused dump truck problems. Also removed ramp behaviour from print sequencer as it will never be used in that instance. Damian Smith 2020-02-20 17:09:00 +00:00
  • e8c9d2c1b5 HMBFDHV-388 - Added PWM for heater power supplies based on mods to SG600 for the same. Damian Smith 2020-02-20 17:01:31 +00:00
  • e2bc73c62e HMBFDHV-230 reducing warnings resulted in non-functional changes to EL-GENERIC-IP so the tag had to be changed. Damian Smith 2019-12-17 17:08:59 +00:00
  • 5fd3957d32 HMBFDHV-230 Suppress known and understood synthesis warnings Damian Smith 2019-12-17 15:48:52 +00:00
  • f1e06d15a1 HMBFDHV-230 Fixed data_streamer version numbers which were disconnected to explicit zeros to remove warnings. Damian Smith 2019-12-17 14:51:29 +00:00
  • c0b032d941 HMBFDHV-230 Use Fire Pulse Manager 4 and Pulse-Generator 2 Damian Smith 2019-11-20 16:51:34 +00:00
  • 8e53d60695 hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 updated preslicer Damian Smith 2019-10-23 13:22:08 +01:00
  • 342a13441c hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 Handle the extra swim interfaces Damian Smith 2019-10-18 16:06:39 +01:00
  • 472663ee92 hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 pick up the tagged generic ip Damian Smith 2019-10-16 17:10:31 +01:00
  • 41abab4b2e hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 Comments added to hmb_fpga_top and blanked-off control lines added to hmb_fpga_top to allow for extra controls on flex Damian Smith 2019-10-16 17:07:34 +01:00
  • faf926a025 hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 Remove files which are no longer used (replaced by generic ip) Damian Smith 2019-10-07 13:33:57 +01:00
  • ac8c9d3745 hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 bus widths, paths, register addressing needed fixing Damian Smith 2019-10-07 13:27:53 +01:00
  • e5299a019d HMBFDHV-151 Updated path to generic shutdown Damian Smith 2019-10-04 17:55:18 +01:00
  • bd91937b58 HMBFDHV-151 remove unused scripts for subtrees Damian Smith 2019-10-04 17:42:14 +01:00
  • f3b880c2a2 hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 test bench handling combine differently now Damian Smith 2019-10-04 14:58:43 +01:00
  • 0baf29549c hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 print_data mapping in core was broken. Set VUserMain0 to do all tests. Set waveform sequence pattern signature Damian Smith 2019-10-04 11:58:18 +01:00
  • 6a6eebcac6 hmbfdhv-185 HMBFDHV-151 FLXSG1024-2 set up preslicer to allow size and limits to be set by generic Damian Smith 2019-10-02 18:06:20 +01:00
  • ffa09b601e FLXSG1024-2 HMBFDHV-151 changed generic and dev tools to use latest testbench code for zerogap. updated data_core and core to use the new generic ip. fixed print_data assignments for core. updated core.json Damian Smith 2019-10-02 16:37:59 +01:00
  • a78c9daa18 FLXSG1024-2 HMBFDHV-151 Brought test bench code over from SG600 zerogap branch. some modifications to the tests to stop zerogap tests from being run. Damian Smith 2019-10-02 16:35:42 +01:00
  • c5b55dc444 FLXSG1024-2 HMBFDHV-151 tb.vhd has max_op_width at 32 for SG1024. Also updated to use latest mem_model. Improved comments in print_unit, core, print_data_rx, runTest.cpp. runTest.h has new waveform signature (I have verified that waveform is correct) Damian Smith 2019-09-27 13:43:29 +01:00
  • 943f06ada5 FLXSG1024-2 HMBFDHV-151 Changed SYSID to 04_09 for this product. Changed MAX_OP_WIDTH to 32 as this is correct for the SG1024. Damian Smith 2019-09-25 14:00:45 +01:00
  • 0b8e288643 FLXSG1024-2 HMBFDHV-151 Modified version and description for core.json . changed the head data/control line mappings for new flex type. Changed SYSID to 04_09 for this product. Changed core default generics to match qsys values for SERDES as this is clearer. Changed MAX_OP_WIDTH to 32 as this is correct for the SG1024. Damian Smith 2019-09-25 12:02:10 +01:00
  • 6a6a932152 Merge branch 'master' into j78_hv_v1_support using strategy ours so that we keep this branch Damian Smith 2019-09-18 13:50:51 +01:00
  • 3ffeaf875d Correction to hmb_fpga.json description of a register--should be read Simon Southwell 2019-09-12 07:25:58 +01:00
  • a23940b92a Add design for test features to slave FPGA Simon Southwell 2019-09-09 15:26:04 +01:00
  • 113dce05f3 Added amp_trip_temp to slave FPGA shutdown monitors and updated tests. Added JSON description of slave FPGA registers Simon Southwell 2019-09-04 12:26:34 +01:00
  • 4be6f6cec0 Updated slave FPGA with additional AMP thermal inputs and fixed I2C reading. Added a virtual processor based regression test bench, which test all but the continuous clock and data alignment. Simon Southwell 2019-09-04 07:34:39 +01:00
  • 534f71baab Added i2c clock line inputs to pio_in for ESW monitoring Simon Southwell 2019-09-02 06:39:20 +01:00
  • 0f1b07219a HMBFDHV-78 Added tow extra bits for lvds_pio in generic_pio o SG600 for masking SCL signals on I2C interfaces, at Ben's request Simon Southwell 2019-08-20 07:34:21 +01:00
  • ddd72558b0 Merge remote-tracking branch 'remotes/origin/j27_waitrequest_adapter' into j78_hv_v1_support Simon Southwell 2019-07-29 12:56:16 +01:00
  • 43a0dcf9f2 Merge remote-tracking branch 'remotes/origin/j27_waitrequest_adapter' into j78_hv_v1_support Simon Southwell 2019-07-29 11:51:10 +01:00
  • 2636436b79 HMBFDHV-136 Merging latest HV V1 changes from main development branch Simon Southwell 2019-07-29 11:49:17 +01:00
  • f061083a73 Merge branch 'j27_waitrequest_adapter' of hydra:GIS_Embedded_Logic/HMB-FD-SG600 into j27_waitrequest_adapter Simon Southwell 2019-07-29 11:08:05 +01:00
  • 352a9f5baf Merge remote-tracking branch 'remotes/origin/j78_hv_v1_support' into j27_waitrequest_adapter Simon Southwell 2019-07-29 11:07:53 +01:00
  • d158839da8 FLXFDSG-27 Adding missing file constant_latency_if.vhd Christos Spirotis 2019-07-29 10:42:40 +01:00
  • ffaeb4f9f5 Support added for testbench to run all tests in no-dynamic-combine configuration Simon Southwell 2019-07-29 07:14:56 +01:00
  • 893c054f61 EAST-17 removing Fire request masking on shutdown by default, but can reinstate with register write Simon Southwell 2019-07-27 09:13:52 +01:00
  • 6527ee2857 FLXFDSG-27 Added two Altera error_response_slave components in Qsys. This increases the device utilization by 3%. Christos Spirotis 2019-07-26 15:23:49 +01:00
  • 6623d9c632 FLXFDSG-27 Integrated FPM v3, changed avalon i/f to 4R/1W waitstates and adapted test bench. Note that this needs a new wrapper for virtual processor. Christos Spirotis 2019-07-26 10:27:26 +01:00
  • c05c83b329 Change BA4 synth build seed as experiment of config lock up debug Simon Southwell 2019-07-26 10:00:57 +01:00