138 lines
3.5 KiB
Markdown
138 lines
3.5 KiB
Markdown
# adsb.fi feed client
|
|
|
|
- These scripts aid in setting up your current ADS-B receiver to feed [adsb.fi](https://adsb.fi/).
|
|
- This will not disrupt any existing feed clients already present.
|
|
- When setting up new feeders, a decoder such as [readsb](https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb) must be installed separately.
|
|
|
|
## 1: Find antenna coordinates and elevation
|
|
|
|
<https://www.freemaptools.com/elevation-finder.htm>
|
|
|
|
## 2: Install the feed client
|
|
|
|
```
|
|
curl -L -o /tmp/feed.sh https://adsb.fi/feed.sh
|
|
sudo bash /tmp/feed.sh
|
|
```
|
|
|
|
## 3: Use netstat to check that your feed is working
|
|
|
|
```
|
|
netstat -t -n | grep -E '30004|31090'
|
|
```
|
|
Expected Output:
|
|
```
|
|
tcp 0 182 localhost:43530 65.109.2.208:31090 ESTABLISHED
|
|
tcp 0 410 localhost:47332 65.109.2.208:30004 ESTABLISHED
|
|
```
|
|
|
|
## 4: Optional: Install [local interface](https://github.com/wiedehopf/tar1090) for your data
|
|
|
|
The interface will be available at http://192.168.X.XX/adsbfi
|
|
Replace the IP address with the address of your Raspberry Pi.
|
|
|
|
Install / Update:
|
|
```
|
|
sudo bash /usr/local/share/adsbfi/git/install-or-update-interface.sh
|
|
```
|
|
Remove:
|
|
```
|
|
sudo bash /usr/local/share/tar1090/uninstall.sh adsbfi
|
|
```
|
|
|
|
### Update the feed client without reconfiguring
|
|
|
|
```
|
|
curl -L -o /tmp/update.sh https://raw.githubusercontent.com/adsbfi/adsb-fi-scripts/master/update.sh
|
|
sudo bash /tmp/update.sh
|
|
```
|
|
|
|
### If you encounter issues, please do a reboot and then supply these logs on Discord (last 20 lines for each is sufficient):
|
|
|
|
```
|
|
sudo journalctl -u adsbfi-feed --no-pager
|
|
sudo journalctl -u adsbfi-mlat --no-pager
|
|
```
|
|
|
|
### Display the configuration
|
|
|
|
```
|
|
cat /etc/default/adsbfi
|
|
```
|
|
|
|
### Use an external source
|
|
|
|
If your feeder is on a separate device from the one this script is installed.
|
|
Edit config `sudo nano /etc/default/adsbfi` and change the IP on the following lines to point to your feeder device's IP:
|
|
|
|
```
|
|
INPUT="127.0.0.1:30005"
|
|
...
|
|
UAT_INPUT="127.0.0.1:30978"
|
|
```
|
|
Then restart the feed client:
|
|
```
|
|
sudo systemctl restart adsbfi-feed
|
|
sudo systemctl restart adsbfi-mlat
|
|
```
|
|
|
|
### Changing the configuration
|
|
|
|
This is the same as the initial installation.
|
|
If the client is up to date it should not take as long as the original installation,
|
|
otherwise this will also update the client which will take a moment.
|
|
|
|
```
|
|
curl -L -o /tmp/feed.sh https://raw.githubusercontent.com/adsbfi/adsb-fi-scripts/master/install.sh
|
|
sudo bash /tmp/feed.sh
|
|
```
|
|
Alternatively edit the config directly and restart the feed client
|
|
```
|
|
sudo nano /etc/default/adsbfi
|
|
sudo systemctl restart adsbfi-feed
|
|
sudo systemctl restart adsbfi-mlat
|
|
```
|
|
|
|
### Disable / Enable adsb.fi MLAT-results in your main decoder interface (readsb / dump1090-fa)
|
|
|
|
This is enabled by default. You probably don't need to change that.
|
|
|
|
- Disable:
|
|
|
|
```
|
|
sudo sed --follow-symlinks -i -e 's/RESULTS=.*/RESULTS=""/' /etc/default/adsbfi
|
|
sudo systemctl restart adsbfi-mlat
|
|
```
|
|
- Enable:
|
|
|
|
```
|
|
sudo sed --follow-symlinks -i -e 's/RESULTS=.*/RESULTS="--results beast,connect,127.0.0.1:30104"/' /etc/default/adsbfi
|
|
sudo systemctl restart adsbfi-mlat
|
|
```
|
|
|
|
### Restart the feed client
|
|
|
|
```
|
|
sudo systemctl restart adsbfi-feed
|
|
sudo systemctl restart adsbfi-mlat
|
|
```
|
|
|
|
### Show status
|
|
|
|
```
|
|
sudo systemctl status adsbfi-feed
|
|
sudo systemctl status adsbfi-mlat
|
|
```
|
|
|
|
### Removal / disabling the services
|
|
|
|
```
|
|
sudo bash /usr/local/share/adsbfi/uninstall.sh
|
|
```
|
|
|
|
If the above doesn't work, you can just disable the services and the scripts won't run anymore:
|
|
|
|
```
|
|
sudo systemctl disable --now adsbfi-feed
|
|
sudo systemctl disable --now adsbfi-mlat
|
|
```
|