beads/docs/reference/troubleshooting.md
Bee 8bb99b49d8
fix(close): verify bead gates on the proxied-server route (#5861 item 1) (#6962)
* fix(close): verify bead gates on the proxied-server route (wy-j48b3y)

The close pre-check built its bead-gate lookup on the local store, which
the proxied-server route never opens (the root pre-run short-circuits to
uowProvider). So `bd close <gate>` on a bead gate refused with
"no local store available" there even after the awaited bead had closed,
while `bd gate check` resolved the same gate through its fresh-read
getter. Item 1 of #5861.

The pre-check now picks the getter by route: proxied-server reads through
the same proxiedFreshReadGetter gate check uses (local read, then prefix
routes); direct and embedded keep the store-backed routed getter.

Tests: a proxied integration test covers the open-target refusal (which
now names the target's status), the closed-target close, and --force;
against the old code it fails with the exact upstream refusal. A unit
test pins the route selection. Docs and CHANGELOG drop the limitation.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* ci(shards): list TestProxiedServerCloseBeadGate in the proxied 30-shard manifest

#7129 turned the Bazel 30-shard block of
.github/scripts/proxied-cmd-test-shards.txt into an exact-once coverage
gate (TestProxiedShardManifestGeneratorNotStale in scripts/). This PR's
merge-base predates that gate, so after the rebase onto current main the
gate fails with "missing (1): TestProxiedServerCloseBeadGate", the
proxied integration test this PR adds.

Generated with the gate's own fix command,
`python3 scripts/ci/gen_proxied_shard_manifest.py 30 --weights=duration --write`.
The write is incremental: it puts the one name on the lightest shard (2)
and moves no existing assignment. The frozen 15-shard block is untouched.

Agent-Signature: claude-code-unknown-model-max on behalf of Eddie the Engineer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: Eddie the Engineer <adopt-pr@gascity.com>
2026-10-08 06:01:18 +00:00

940 lines
28 KiB
Markdown

---
title: Troubleshooting
description: Fixes for common bd problems across installation, the database and Dolt server, sync, git hooks, dependencies, and platform-specific issues.
---
Common issues and solutions. For step-by-step runbooks, see the
[Recovery section](/recovery/index).
## Installation Issues
### `bd: command not found`
```bash
# Check if installed
which bd
go list -f {{.Target}} github.com/steveyegge/beads/cmd/bd
# Add Go bin to PATH (add to ~/.bashrc or ~/.zshrc)
export PATH="$PATH:$(go env GOPATH)/bin"
# Or reinstall with the recommended installer
curl -fsSL https://raw.githubusercontent.com/gastownhall/beads/main/scripts/install.sh | bash
```
### Wrong version of bd running
If `bd version` shows an unexpected version (e.g., older than what you just
installed), you likely have multiple `bd` binaries in your PATH:
```bash
# Check all bd binaries in PATH
which -a bd
# Example output showing conflict:
# /Users/you/go/bin/bd <- From go install (older)
# /opt/homebrew/bin/bd <- From Homebrew (newer)
# Remove the old go install version
rm ~/go/bin/bd
# Or remove mise-managed Go installs
rm ~/.local/share/mise/installs/go/*/bin/bd
# Verify
which bd
bd version
```
This happens when a binary from an earlier `go install` sits in `~/go/bin/`
ahead of a newer package-manager install. Choose one installation method
(Homebrew recommended) and stick with it.
### `zsh: killed bd` on macOS
CGO/SQLite compatibility issue:
```bash
CGO_ENABLED=1 GOFLAGS=-tags=gms_pure_go go install github.com/steveyegge/beads/cmd/bd@latest
# Or if building from source
git clone https://github.com/gastownhall/beads
cd beads
CGO_ENABLED=1 go build -tags gms_pure_go -o bd ./cmd/bd
sudo mv bd /usr/local/bin/
```
Homebrew builds already enable CGO, so this shouldn't be necessary there. If
you still see crashes with the Homebrew version, please
[file an issue](https://github.com/gastownhall/beads/issues).
### Permission denied
```bash
chmod +x $(which bd)
# Or install to a user directory instead
mkdir -p ~/.local/bin
mv bd ~/.local/bin/
export PATH="$HOME/.local/bin:$PATH"
```
### Antivirus flags bd as malware
Kaspersky, Windows Defender, and others sometimes flag `bd` as a generic
trojan. This is a **false positive** — Go binaries commonly trigger antivirus
heuristics. Verify the binary's SHA256 checksum against the
[GitHub release page](https://github.com/gastownhall/beads/releases) before
adding an exclusion. See [Antivirus False Positives](/reference/antivirus) for
per-vendor instructions.
## Database Issues
### Database not found
```bash
# Initialize beads
bd init --quiet
# Or point bd at an existing .beads directory
BEADS_DIR=/path/to/.beads bd list
```
### Database locked
```bash
# Stop the Dolt server if running (server mode)
bd dolt stop
# Find and kill hanging bd processes
ps aux | grep bd
kill <pid>
# Try again
bd list
```
<Warning>
Do NOT remove files inside `.dolt/` directories (including `noms/LOCK`).
These are Dolt-internal files — removing them WILL cause unrecoverable data
corruption. Dolt manages these files itself.
</Warning>
For high-concurrency scenarios (multiple agents), server mode
(`bd init --server`) handles concurrent access natively via `dolt sql-server`.
### `bd init` refuses to run
`bd init` and `bd dolt` refuse operations that could destroy local or remote
history, printing a pattern code such as `init-local-exists` or
`pk-fork-refused`. Each code has a runbook — see
[Recovery Playbooks](/recovery/init-safety). Export first
(`bd export -o backup.jsonl`) if you intend to re-initialize over existing
data.
### Corrupted database
Distinguish **logical consistency issues** (ID collisions, wrong prefixes)
from **physical database corruption** (disk failures, power loss, filesystem
errors).
For logical consistency issues — this is not corruption:
```bash
bd doctor --fix
```
For physical corruption, rebuild from a Dolt remote or a backup:
```bash
# Move the damaged data directory aside:
mv .beads/embeddeddolt .beads/embeddeddolt.backup # embedded mode (default)
mv .beads/dolt .beads/dolt.backup # server mode
bd init
bd dolt pull # Pull from Dolt remote if configured
# Or restore from a backup:
# bd backup restore [path] --force
```
See [Database Corruption](/recovery/database-corruption) for the full runbook.
### Dolt journal corruption after restart
**Symptom (server mode):** After a system restart, `bd` reports that the Dolt
server started but is not accepting connections, and `.beads/dolt-server.log`
contains:
```text
possible data loss detected in journal file at offset ...: corrupted journal
```
**Cause:** Dolt detected damaged journal blocks after an unclean shutdown.
This is not the same as a stale PID, stale port, or stale lock file. `bd`
will not run Dolt's data-loss repair mode automatically.
**Safe recovery when your remote is current:**
```bash
# Server mode data lives at .beads/dolt; embedded mode at .beads/embeddeddolt
mv .beads/dolt .beads/dolt.corrupt.$(date +%Y%m%dT%H%M%S)
bd bootstrap --dry-run
bd bootstrap --yes
bd stats
```
If the remote may be stale, keep the corrupt directory for forensics and
inspect it with `dolt fsck` before considering
`dolt fsck --revive-journal-with-data-loss`. Only use the revive path after
reviewing Dolt's data-loss warning.
### `failed to import: issue already exists`
You're trying to bootstrap a database with issues that conflict with existing
ones. Clear the local database and re-initialize from an export:
```bash
# DESTROYS the local database — export first if unsure
rm -rf .beads/embeddeddolt # embedded mode (default)
rm -rf .beads/dolt # server mode
bd init --from-jsonl
```
### Imported children whose parent is gone
Bootstrapping from JSONL or pulling hierarchical issues (e.g., `bd-abc.1`) can
land children whose parent `bd-abc` no longer exists — typically after
`bd delete` on a parent, a branch merge where one side deleted it, or an
incomplete import.
Import accepts these orphans rather than failing, so the children still arrive
and stay usable. Recreate the parent (or close out the orphaned children) once
the import finishes.
**Prevention:** use `bd delete --cascade` to also delete children, and review
children first with `bd children <parent-id>`.
### Old data returns after reset
`bd admin reset --force` only removes **local** beads data. Old issues can
return from configured Dolt remotes or from other machines that push after
you reset. For a complete clean slate, reset every clone (or clear the
remote's beads data) before re-running `bd init`.
If you previously used the removed legacy sync-branch feature, also delete
its branch and worktrees — see
[Worktrees: Legacy Cleanup](/reference/worktrees#legacy-cleanup).
### `bd` shows 0 issues but the database has data
**Symptom (server mode):** All `bd` commands return empty results even though
your data exists.
**Cause:** `bd` is connecting to a different Dolt server or database than
expected — an empty "shadow" database on the wrong server.
**Diagnosis:**
```bash
# Check what mode and server bd is using
cat .beads/metadata.json | grep -E "dolt_mode|dolt_server_port"
# Run server-mode health checks
bd doctor --server
# Confirm what the connected database contains
bd sql 'SELECT COUNT(*) FROM issues'
```
**Fix:** ensure your Dolt server is running from the correct data directory
and that `metadata.json` points at the right server and port. If a stale
`.beads/dolt/` directory exists alongside an external-server configuration,
it can shadow the real database — confirm your real data lives on the server
before removing the stale directory.
### Configured server unreachable (auto-start disabled)
**Symptom (server mode):** `bd` returns "database not found on Dolt server"
when the configured server is down.
**Cause:** When `metadata.json` has an explicit `dolt_server_port`, bd treats
the server as externally managed and intentionally disables auto-start —
spawning a different server would create a shadow database.
**Fix:**
```bash
# Start your configured Dolt server
bd dolt start
# Or start manually with the correct data directory
dolt sql-server --host 127.0.0.1 --port 3307 --data-dir /path/to/your/dolt/data
```
If you want auto-start behavior, remove `dolt_server_port` from
`.beads/metadata.json`.
### Port conflicts with multiple projects
**Symptom (server mode):** Commands in a second project fail or connect to the
wrong database, and multiple `dolt sql-server` processes are running.
**Cause:** Each server-mode project starts its own Dolt server by default,
which can conflict on machines with many projects.
**Fix:** Enable shared server mode so all projects use a single Dolt server:
```bash
# Option 1: Machine-wide (add to ~/.bashrc or ~/.zshrc)
export BEADS_DOLT_SHARED_SERVER=1
# Option 2: Per-project
bd config set dolt.shared-server true
```
After enabling, existing projects may need `bd init --reinit-local -q` to
create their database on the shared server.
**Verify:** `bd dolt status` from any project should show the same server,
port 3308, and `~/.beads/shared-server/` as the data directory.
### Multiple databases detected warning
bd warns when it finds more than one `.beads` directory in your directory
hierarchy, marking the one in use with `▶` (usually the closest to your
current directory). Multiple databases risk working in the wrong one or
tracking the same work twice.
- **Nested projects (intentional):** this is supported — just note which
database is active, or pin it explicitly.
- **Accidental duplicates:** export from the unwanted database
(`bd export -o issue-export.jsonl`), then remove its `.beads` directory.
- **Override selection:**
```bash
# Point bd at a specific .beads directory (recommended)
export BEADS_DIR=/path/to/.beads
# Legacy method (deprecated, points at the database file directly)
export BEADS_DB=/path/to/db
```
### Circuit breaker: "server appears down, failing fast"
**Symptom (server mode):** Every `bd` command fails with
`dolt circuit breaker is open: server appears down, failing fast (cooldown 30s)`,
persisting across repeated invocations.
**Cause:** The circuit breaker tripped after repeated connection failures.
Its state lives in a file under `/tmp/beads-circuit/` (named
`beads-dolt-circuit-<host>-<port>[-<db>].json`, keyed on host:port) and is
shared across all `bd` processes. Once tripped, all commands to that host:port
are rejected until a successful probe resets it.
For beads-managed local servers, `bd dolt status` reports from the server's
PID file — a "running" status does not guarantee the server is actually
accepting connections on the expected port.
**Diagnosis:**
```bash
# Check circuit breaker state
cat /tmp/beads-circuit/beads-dolt-circuit-*.json
# Check if the Dolt server is actually listening
lsof -i :<port>
# Compare the configured port with what's running
cat .beads/metadata.json | grep port
```
**Fix:**
```bash
rm /tmp/beads-circuit/beads-dolt-circuit-*.json
bd dolt stop
bd dolt start
bd list
```
On macOS, `/tmp` is a symlink to `/private/tmp`, which is not always cleared
on restart — the state file can persist across reboots.
## Dolt Server Issues
### Server not starting
```bash
# Check server health
bd doctor
# Check server logs (server mode; embedded mode runs in-process, no server log)
cat .beads/dolt-server.log
# Restart the server
bd dolt stop
bd dolt start
```
### Version mismatch
After upgrading bd:
```bash
bd dolt stop
bd dolt start
```
### Proxied-server mode: "dolt is older than the recommended minimum" warning
Managed proxied-server mode spawns an external `dolt` CLI it finds via
`BEADS_DOLT_BIN` or PATH (in that order — see
[Environment Variables](/reference/configuration#environment-variables); a
clone-local sidecar setting will slot between the two when the sidecar
reader lands in contract part 2). On
startup it probes that binary with `dolt version` and recommends
**dolt >= 2.0.0**: the 2026-07-25 cross-version compatibility matrix found
that cross-reading storage written by the beads Dolt Go module (as opposed
to writing it, which older dolt CLIs can also do) requires dolt >= 2.0.0 —
dolt 1.85 can *serve* proxied mode but cannot *read* storage the module
wrote, and dolt 1.52.1 fails at both serving and reading.
This is a warning, not a hard failure — there is deliberately no hard
version floor, so an older dolt can still be used at your own risk. To
resolve it, install the pinned dolt version — see
[Which Dolt version to install](/architecture/dolt#which-dolt-version-to-install)
— and either update PATH or set `BEADS_DOLT_BIN` to the new binary's path.
Install that specific version rather than `latest`: 2.3.x is a newer release
that satisfies this warning but carries a
[separate data-operation defect](/architecture/dolt#which-dolt-version-to-install).
The advisory repeats at most once per day, not on every command: the probe
result and the warning timestamp are cached (keyed by the binary's path,
size, and mtime, in the user cache directory), so day-to-day `bd` use stays
quiet while the reminder still resurfaces until the binary is upgraded.
Upgrading or replacing the dolt binary re-probes immediately.
If the probe can't parse `dolt version`'s output at all (most commonly a
dev/custom build with non-standard version output), that also only warns —
proxied-server mode still starts, since an unparseable version means "we
don't know", not "this is definitely broken". A genuinely missing or
broken `dolt` binary (not found, not executable, or the probe itself
fails/times out) is a hard error, not a warning.
### Prefix routing: "proxy server store needs to be uow provider"
A lookup routed through the orchestrator's `routes.jsonl` prefix routes
fails with this error when the rig that owns the prefix is itself running in
proxied-server mode — routed reads cannot open a proxied-server rig. In an
all-proxied shared-server topology that applies to every routed target, so
cross-rig bead gates and a plain `bd show <routed-id>` both dead-end here.
Run the command from the owning rig's own workspace instead, where the ID
resolves locally rather than through a route. Tracked in
[#5861](https://github.com/gastownhall/beads/issues/5861).
## Sync Issues
### Changes not syncing
```bash
# Force push to Dolt remote
bd dolt push
# Check hooks
bd hooks list
```
### Recovery from backup
```bash
# Restore from a Dolt backup
bd backup restore [path] --force
# Or pull from Dolt remote
bd dolt pull
```
### Merge conflicts
Dolt merges at the cell level, so concurrent changes conflict only when they
touch the same field of the same issue. Hash-based IDs mean different issues
never collide on ID.
```bash
# Check for and fix Dolt conflicts
bd doctor --fix
# Re-push
bd dolt push
```
See [Merge Conflicts](/recovery/merge-conflicts) for the full runbook.
## Git Hook Issues
### Hooks not running
```bash
# Check if installed
ls -la .git/hooks/
# Reinstall
bd hooks install
```
### Hook errors
```bash
# Check hook script
cat .git/hooks/pre-commit
# Run manually
.git/hooks/pre-commit
```
### Hook timeout kills chained pre-commit hooks
**Symptom:** After `bd hooks install`, chained pre-commit hooks (eslint,
prettier, ruff, etc.) stop running, with:
`beads: hook 'pre-commit' timed out after 300s -- continuing without beads`.
**Cause:** The beads hook shim wraps `bd hooks run` with an OS-level timeout.
Since `bd hooks run` chains to your original hook internally, the timeout
covers both beads' own work and your entire hook pipeline.
**Fix:** Increase the timeout (default 300 seconds):
```bash
# Add to ~/.bashrc or ~/.zshrc
export BEADS_HOOK_TIMEOUT=600 # 10 minutes (in seconds)
```
The value must be a positive whole number of seconds. Invalid values and zero
warn and fall back to 300 seconds. Beads accepts `timeout` or `gtimeout` only
when a successful version probe identifies GNU coreutils or uutils coreutils;
native Windows `timeout.exe` is not compatible. If neither a coreutils timeout
nor Perl is available, the hook warns that it is running directly without a
deadline.
The coreutils helper sends `TERM`; on POSIX hosts, Perl's alarm applies to the
direct `bd` process. Git for Windows Perl does not guarantee that alarm across
`exec`, so a coreutils `timeout` (GNU or uutils) is preferred there.
TERM-resistant work and descendant processes are not guaranteed to stop.
Already-installed hook sections are not refreshed automatically. After upgrading
to a version that changed the timeout probe — the name-only check, or the uutils
coreutils banner — run `bd hooks install` once to refresh existing canonical
sections.
### Permission denied on git hooks
Git hooks need execute permissions:
```bash
chmod +x .git/hooks/pre-commit
chmod +x .git/hooks/post-merge
chmod +x .git/hooks/post-checkout
```
### Corrupted symlinked `CLAUDE.md`
**Symptom:** Git reports `CLAUDE.md` as a symlink entry (mode `120000`), but
the indexed blob contains multi-line Markdown instead of a one-line symlink
target. On macOS this can make clones or checkouts fail.
This affects repositories corrupted by older setup behavior (fixed in
[#4192](https://github.com/gastownhall/beads/pull/4192)). To repair an
existing bad index entry:
```bash
# Confirm the bad entry: mode 120000 but Markdown content
git ls-files -s CLAUDE.md
git cat-file -p :CLAUDE.md | sed -n '1,5p'
# Convert the blob to a regular tracked file without changing content
sha=$(git rev-parse :CLAUDE.md)
git update-index --cacheinfo 100644,$sha,CLAUDE.md
git checkout-index -f -- CLAUDE.md
# Verify: first column should now be 100644
git ls-files -s CLAUDE.md
git diff -- CLAUDE.md
```
Commit the mode repair after review.
### "Branch already checked out" or unexpected `.git/beads-worktrees/`
Older beads versions created hidden git worktrees for a removed sync-branch
feature; leftovers can lock branches (`fatal: 'main' is already checked out
at .../beads-worktrees/...`). Remove them:
```bash
rm -rf .git/beads-worktrees
rm -rf .git/worktrees/beads-*
git worktree prune
```
See [Worktrees: Legacy Cleanup](/reference/worktrees#legacy-cleanup).
## Dependency Issues
### `bd ready` shows nothing but I have open issues
Those issues probably have open blockers:
```bash
# See blocked issues
bd blocked
# Show the dependency tree (default max depth: 50)
bd dep tree <issue-id>
bd dep tree <issue-id> --max-depth 10
# Remove a blocking dependency if needed
bd dep remove <from-id> <to-id>
```
Remember: only `blocks` dependencies affect ready work.
### Circular dependencies
bd prevents dependency cycles, which break ready work detection:
```bash
# Detect cycles
bd dep cycles
# Remove one dependency
bd dep remove bd-A bd-B
```
See [Circular Dependencies](/recovery/circular-dependencies) for the full
runbook.
### Dependencies not showing up
```bash
# Show full issue details including dependencies
bd show <issue-id>
# Visualize the dependency tree
bd dep tree <issue-id>
```
Different dependency types have different meanings — only `blocks` gates
ready work. See [Dependencies](/core-concepts/dependencies).
## Performance Issues
### Slow queries
```bash
# Check database stats
bd stats
# Check on-disk size
du -sh .beads/embeddeddolt # embedded mode (default)
du -sh .beads/dolt # server mode
# Preview compaction candidates
bd admin compact --dry-run --all
# Compact if large
bd admin compact --analyze
```
Consider splitting very large projects into multiple databases:
```bash
cd ~/project/component1 && bd init --prefix comp1
cd ~/project/component2 && bd init --prefix comp2
```
### High memory usage
```bash
# Run Dolt garbage collection to compact storage
bd admin compact --dolt
```
If this or `bd flatten` stops with `Error 1105 (HY000): context canceled`,
see [Storage reclaim fails with "context canceled"](#storage-reclaim-fails-with-context-canceled)
below.
### Storage reclaim fails with "context canceled"
`bd flatten` and the Dolt-history compaction in `bd admin compact` finish by
hard-resetting `main` onto a temporary branch; the merge-settle path behind
`bd dolt pull` / `bd sync` falls back to a hard reset when it abandons a
merge. On Dolt 2.3.x a few percent of freshly created databases come up with
`CALL DOLT_RESET('--hard')` broken for the life of the server process, so on
an affected database those commands stop with:
```
Error 1105 (HY000): context canceled
```
Nothing else looks wrong — ordinary queries, commits, soft resets,
`CALL DOLT_CLEAN()` and `CALL DOLT_CHECKOUT('.')` all still work — so the
problem only shows up when something needs a hard reset. Confirm with the
check in
[Which Dolt version to install](/architecture/dolt#which-dolt-version-to-install),
which also covers the fix: restarting `dolt sql-server` clears it for now,
and installing the pinned Dolt version keeps it clear.
This applies to server and proxied-server mode, which use the standalone
`dolt` CLI. Embedded mode links its own Dolt engine at the version pinned in
`go.mod` and is not affected by which `dolt` CLI is on your PATH.
## Agent Issues
### Agent creates duplicate issues
Agents may not realize an issue already exists. Prevention strategies:
- Have agents search first: `bd list --json | grep "title"`
- Label auto-created issues: `bd create "..." -l auto-generated`
- Consolidate duplicates: `bd duplicate <dup-id> --of <canonical-id>` closes
the duplicate with a reference to the canonical issue
### Agent gets confused by complex dependencies
Simplify the dependency structure:
```bash
# Check for overly complex trees
bd dep tree <issue-id>
# Remove unnecessary dependencies
bd dep remove <from-id> <to-id>
# Use labels instead of dependencies for loose relationships
bd label add <issue-id> related-to-feature-X
```
### MCP server not working
```bash
# Verify the MCP server is installed
pip list | grep beads-mcp
# Check MCP configuration (Claude Desktop on macOS)
cat ~/Library/Application\ Support/Claude/claude_desktop_config.json
# Test that the CLI itself works
bd version
bd ready
bd doctor
```
See [MCP Server](/integrations/mcp-server) for setup and configuration.
### Sandboxed environments (Codex, Claude Code, etc.)
Sandboxes that restrict process and network permissions can prevent bd from
controlling a Dolt server, causing persistent "database out of sync" errors
or `bd dolt stop` failing with "operation not permitted".
bd auto-detects sandboxed environments and prints
`Sandbox detected, using direct mode`. If auto-detection fails, pass the
global `--sandbox` flag explicitly:
```bash
bd --sandbox ready
bd --sandbox create "Fix bug" -p 1
```
Sandbox mode disables Dolt auto-push so bd works without server control or
network access. Sync manually once outside the sandbox:
```bash
bd dolt push
```
If staleness errors persist, `bd doctor --fix` forces a metadata refresh
(low risk — it updates tracking metadata, not issues). Background:
[GH#353](https://github.com/gastownhall/beads/issues/353).
## Platform-Specific Issues
### Windows: Path issues
```pwsh
# Check if bd.exe is in PATH
where.exe bd
# Add Go bin to PATH (permanently)
[Environment]::SetEnvironmentVariable(
"Path",
$env:Path + ";$env:USERPROFILE\go\bin",
[EnvironmentVariableTarget]::User
)
# Reload PATH in current session
$env:Path = [Environment]::GetEnvironmentVariable("Path", "User")
```
### Windows: Firewall blocking the Dolt server
In server mode, the Dolt server listens on loopback TCP. Allow `bd.exe`
through Windows Firewall: Windows Security → Firewall & network protection →
"Allow an app through firewall" → add `bd.exe` for Private networks.
### Windows: Controlled Folder Access blocks `bd init`
**Symptom:** `bd init` hangs indefinitely with high CPU usage, and CTRL+C
doesn't work. Controlled Folder Access may block bd without showing a
notification, making this hard to diagnose without the `-v` flag:
```pwsh
bd init -v
# Error: failed to create .beads directory: mkdir .beads: The system cannot find the file specified
```
**Solution:** Whitelist `bd.exe`: Windows Security → Virus & threat
protection → Ransomware protection → Controlled folder access → "Allow an
app through Controlled folder access" → browse to `bd.exe` (typically
`%USERPROFILE%\go\bin\bd.exe`). Then retry `bd init`.
### Windows: `ENOENT` when a Node program spawns `bd`
**Symptom:** An editor extension, MCP server, or script that shells out to
`bd` fails on Windows with `spawn bd ENOENT`, even though `bd` runs fine in
the same terminal.
The npm package installs `bd` as a generated `bd.cmd` shim, not as an
executable named `bd`. Node's `execFile()` and `spawn()` run their target
directly instead of through a shell, so they never apply the `PATHEXT`
resolution that finds `bd.cmd` — and a batch file is not directly executable
in the first place.
**Solution:** Name the shim explicitly and give it a shell:
```js
const { execFile } = require('node:child_process');
const isWindows = process.platform === 'win32';
execFile(
isWindows ? 'bd.cmd' : 'bd',
['ready', '--json'],
{ shell: isWindows },
(err, stdout) => { /* ... */ },
);
```
To avoid a shell — and the argument quoting that comes with it — spawn the
native binary the shim wraps, at `node_modules/@beads/bd/bin/bd.exe`.
### Windows: `/tmp` paths silently land in the drive root
**Symptom:** A `bd` command given a `/tmp/...` path reports success, but
the file is not where you look for it — it was written to `C:\tmp\...`.
`bd.exe` is a native Windows binary and does not share Git Bash's emulated
POSIX filesystem. When a literal `/tmp/...` string reaches `bd`, it resolves
against the current drive root.
In a default interactive Git Bash this usually does *not* happen — Git for
Windows converts standalone POSIX-path arguments to Windows paths before
`bd.exe` sees them. The trap appears when that conversion is out of play:
- `MSYS_NO_PATHCONV=1` or `MSYS2_ARG_CONV_EXCL` is set (common in
Docker-heavy environments)
- the path comes from a config value or a file, not a command-line argument
- `bd` is spawned by a non-MSYS parent — a Node script, editor extension,
or MCP server — which passes the string through verbatim:
```js
// From Node on Windows: no path conversion happens
execFile('bd.cmd', ['export', '-o', '/tmp/issues.jsonl'], { shell: true }, ...);
// bd writes C:\tmp\issues.jsonl — and exits 0
```
**Solution:** Hand `bd` a Windows path — `os.tmpdir()` from Node,
`"$(cygpath -w /tmp)\issues.jsonl"` from Git Bash scripts. This applies to
any path argument, including `--db` and config values.
### macOS: Gatekeeper blocking execution
1. Verify the downloaded binary checksum matches the release `checksums.txt`.
2. If you used `scripts/install.sh`, note that macOS ad-hoc re-signing is
opt-in (`BEADS_INSTALL_RESIGN_MACOS=1`).
3. Approve the binary:
```bash
# Remove quarantine attribute
xattr -d com.apple.quarantine /usr/local/bin/bd
# Or: System Preferences → Security & Privacy → General → "Allow anyway"
```
## Debug Environment Variables
bd supports environment variables for debugging specific subsystems. Enable
them when troubleshooting or when requested by maintainers.
| Variable | Purpose | Output |
|----------|---------|--------|
| `BD_DEBUG` | General debug logging | stderr |
| `BD_DEBUG_RPC` | RPC communication between CLI and Dolt server | stderr |
| `BD_DEBUG_SYNC` | Sync and import timestamp protection | stderr |
| `BD_DEBUG_ROUTING` | Issue routing and multi-repo resolution | stderr |
| `BD_DEBUG_FRESHNESS` | Database file replacement detection | server log |
Set any of them to `1` to enable; `unset` to disable.
```bash
# General debugging
BD_DEBUG=1 bd ready
# Capture debug output to a file
BD_DEBUG=1 bd dolt push 2> debug.log
# Sync timestamp protection, e.g.:
# [debug] Protected bd-123: local=2024-01-20T10:00:00Z >= incoming=2024-01-20T09:55:00Z
BD_DEBUG_SYNC=1 bd dolt push
# Freshness output goes to the server log (server mode), not stderr
BD_DEBUG_FRESHNESS=1 bd dolt start
tail -f .beads/dolt-server.log | grep freshness
```
For multi-repo routing configuration, see [Routing](/multi-agent/routing).
## Getting Help
### Debug output
```bash
bd --verbose list
```
### Logs
```bash
# Server mode (embedded mode runs in-process, no server log)
cat .beads/dolt-server.log
```
### System info
```bash
bd info --json
```
### File an issue
```bash
# Include this info
bd version
bd info --json
uname -a
```
Report at: https://github.com/gastownhall/beads/issues — or ask in
[GitHub Discussions](https://github.com/gastownhall/beads/discussions).