* fix(schema,uow): route the proxied data-behind open to the #6575 stop with topology-correct guidance (port of #6695)
Port of the release/1.3.x commit bb03a310a9 (PR #6695) to main, where it
never landed: v1.3.1 is cut from a release branch that is not an ancestor
of main.
The proxied / `bd serve` open path never reached the #6575 data-behind
stop. doltSQLProvider.initSchemaAttempt passed a nil adopter to
CheckSharedStoreMigrateGate, so localDataBehind short-circuited and the
router could never emit smartDataBehind. A proxied store that was level
on schema and behind in data reported `shared-store` instead, whose body
is the designated-migrator recipe -- `bd migrate --force` then
`bd dolt push` -- which in that state is exactly the #6368 wedge the
stop exists to prevent. The refusal was always safe (the shared arm
suppresses the auto-migrate either way); the guidance was not.
- uow: wire a dataBehindAdopter with AheadBehind only
(versioncontrolops.LocalAheadBehind). IsStrictAncestor/WorkingSetClean
stay nil so the remote-ahead arm keeps its plain adopt directive, and
FastForward stays nil because it would promote the schema for every
co-resident client. Read-only proxied opens print the pull-first block
instead of the shared-consent template.
- uow.WithProxiedServerMode(), set only by openProxiedServerUOWProvider,
marks the refusal Proxied: the same provider serves `bd serve` on a
SERVER-mode workspace, where `bd dolt pull` works.
- schema: a Proxied refusal names the server host as where the pull runs
(`bd dolt pull` is refused at the proxied front door,
proxy.dolt_pull.unsupported), the option id becomes
pull-first-on-server-host, and the guidance says the forced
`bd migrate schema --force` consent step IS runnable from the proxied
workspace (the capability registry permits `migrate schema`), so it must
wait for the pull, and that BD_ALLOW_REMOTE_MIGRATE=1 is reachable too.
- cmd/bd: the --json `expected` field carries the same location
qualifier (dataBehindExpectedField).
Not ported, because main already has it: the release PR's F-B half (the
shared data-behind consent step naming `bd migrate schema --force` and
its --global twin, the printGlobalDatabaseConsentHint retarget, and the
shared_migrate_consent_test.go changes) landed on main as #6692.
Adapted to main: the release line's proxyMaintenanceRefusals table is
main's capability registry, so TestProxyMaintenanceAllowsTheSharedConsentVerb
drives validateProxyRegistryBeforeProvider for every proxied topology and
also pins that `bd dolt pull` and the bare `bd migrate` are refused; the
CHANGELOG paragraph is appended to main's existing #6575 entry.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs(upgrading): where the proxied data-behind pull runs; pin its plumbing
Review fixes for the proxied data-behind stop: the one major of review
attempt 1, the cheap minors, and the nit, plus the wording minor of
attempt 2.
- Clone behind the remote, the docs section the gate's payload links
to, prescribed `bd dolt pull` with no topology qualifier: the remedy a
proxied-server workspace refuses at its front door. Its intro now says
so, and a proxied-server step pair puts the pull (and any conflict
resolution) on the server host, from a workspace with direct database
access, then `bd migrate schema --force` in the proxied workspace. It
also warns that nothing there enforces that order: `--force` and
BD_ALLOW_REMOTE_MIGRATE=1 are honored before the stop is reached, so
the stop never sees them. The warning ends on the payload's own
instruction, not to reach for either to get past the stop, rather than
a negation ("neither is a way past it") that read as the topology
blocking the wedge. The pending-migration exception above the section,
the proxied-server list under Shared servers (now three differences)
and the init-safety ordering rule say the same. The heading, and with
it the anchor the gate links, is unchanged.
- The option plumbing that carries the fix is pinned link by link.
TestApplyProviderOptions covers WithProxiedServerMode (it sets that
field and no open posture). The cmd/bd append moves into
proxiedProviderOptions, which TestProxiedProviderOptions holds to
exactly one added option on a fresh slice. And
TestNewDoltServerUOWProvider_CarriesProxiedServerMode opens two real
providers on one server, with and without the option, and reads the
field the gate copies; openAndInitSchema's provider literal and the
shared test open helpers are left as they were.
- TestProxyMaintenanceAllowsTheSharedConsentVerb also pins `bd dolt
push` and `bd conflicts resolve` as refused, the rest of the list the
proxied refusal body recites. `dolt push` is refused as unimplemented,
the kind of row that flips to allowed once a route lands.
- localDataBehind's doc comment is re-wrapped so the IsStrictAncestor
sentence no longer breaks across the inserted parenthetical.
- The CHANGELOG entry notes the docs change.
Each new pin is red with its link reverted: the option dropped from the
cmd/bd append, the append made in place, the field copy deleted from
the provider literal, the constructor dropping its options, the option
also setting preview, and the push and conflicts codes changed. Still
unpinned: which option the cmd/bd append adds (options are opaque
outside uow) and that `bd serve`'s server-mode open passes none; both
need a seam in cmd/bd.
Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
29 KiB
| title | description |
|---|---|
| Upgrading | Upgrade the bd binary, refresh git hooks, run schema migrations, and handle remote-backed and cross-era databases |
How to upgrade bd and keep your projects in sync.
Checking for Updates
# Current version
bd version
# What changed since the version you were running — the delta, not the archive
bd upgrade review
bd upgrade review --json # Machine-readable
# The full release history (large; every version bd knows about)
bd info --whats-new
Short Version
- With your current
bd, sync remote-backed databases before installing the new binary:bd dolt pushbd dolt pull - Back up with that same current binary, before installing:
bd export --all -o .beads/backup/pre-migrate-$(date +%Y%m%d).jsonl - Upgrade using the command that matches your install method.
- After upgrading:
bd upgrade reviewbd hooks installbd version - If crossing a schema migration on a remote-backed database, only the
designated migrator runs:
bd migrate schemabd dolt push
Other clones must not migrate independently. After the migrator pushes, each
other clone runs bd dolt pull with its current binary, then installs the new
one. A clone that already has the new binary adopts the migrated database by
moving its local database aside and running bd bootstrap; bd bootstrap on
its own leaves an existing database untouched. The full procedure is below.
Upgrading
Use the command that matches your install method.
| Install method | Platforms | Command |
|---|---|---|
| Quick install script | macOS, Linux, FreeBSD | curl -fsSL https://raw.githubusercontent.com/gastownhall/beads/main/scripts/install.sh | bash |
| PowerShell installer | Windows | irm https://raw.githubusercontent.com/gastownhall/beads/main/install.ps1 | iex |
| Homebrew | macOS, Linux | brew upgrade beads |
| go install (server-mode only) | macOS, Linux, FreeBSD, Windows | CGO_ENABLED=0 go install github.com/steveyegge/beads/cmd/bd@latest |
| go install (embedded-capable) | macOS, Linux, Windows | CGO_ENABLED=1 GOFLAGS=-tags=gms_pure_go go install github.com/steveyegge/beads/cmd/bd@latest |
| npm | macOS, Linux, Windows | npm update -g @beads/bd |
| bun | macOS, Linux, Windows | bun install -g --trust @beads/bd |
| From source (Unix shell) | macOS, Linux, FreeBSD | git pull && make build |
Quick install script (macOS/Linux/FreeBSD)
curl -fsSL https://raw.githubusercontent.com/gastownhall/beads/main/scripts/install.sh | bash
PowerShell installer (Windows)
irm https://raw.githubusercontent.com/gastownhall/beads/main/install.ps1 | iex
Homebrew
brew upgrade beads
{/* Canonical Homebrew tap-migration snippet. The installation page links
here; keep the two in sync. */}
If you still have the old tap formula installed as bd, switch to the
Homebrew core formula:
brew uninstall bd
brew untap gastownhall/beads 2>/dev/null || true
brew untap steveyegge/beads 2>/dev/null || true
brew install beads
go install
# Server-mode only
CGO_ENABLED=0 go install github.com/steveyegge/beads/cmd/bd@latest
# Embedded-capable
CGO_ENABLED=1 GOFLAGS=-tags=gms_pure_go go install github.com/steveyegge/beads/cmd/bd@latest
From Source
cd beads
git pull
make build
sudo mv bd /usr/local/bin/
After Upgrading
Important: After upgrading, update your hooks:
# 1. Check what changed
bd info --whats-new
# 2. Update git hooks to match new version
bd hooks install
# 3. Check for any outdated hooks
bd info # Shows warnings if hooks are outdated
# 4. If using Dolt backend, restart the server
bd dolt stop && bd dolt start
Why update hooks? Git hooks are versioned with bd. Outdated hooks may miss export refresh, legacy fallback, or safety fixes.
Database Migrations
After major upgrades, check for database migrations:
# Inspect migration plan (AI agents)
bd migrate --inspect --json
# Preview migration changes
bd migrate --dry-run
# Apply migrations
bd migrate schema
# Migrate and clean up old files
bd migrate --yes
Upgrading to 1.3.0
A 1.2.2 or 1.1.x database sits at schema v53, and 1.3.0 knows v66. That is more than a routine upgrade: 1.2.2 was a recovery release that shipped the 1.1 code under a higher version number, so there is a release line's worth of schema between the two.
Back up first, with the binary you have now
Do this before you install 1.3.0. Under the new binary, bd export triggers
the migration before it exports, so a snapshot taken afterwards is a
post-migration snapshot and cannot protect you against the migration going
wrong. The same ordering rule as the section below applies: do all syncing with
your current binary, since once 1.3.0 is installed the pending-migration
gate refuses bd dolt push and bd dolt pull too.
# with your CURRENT bd:
bd dolt push # remote-backed stores only
bd export --all -o .beads/backup/pre-1.3.0-$(date +%Y%m%d).jsonl
For a Dolt-native snapshot that keeps history and config, configure a
destination and sync it. Bare bd backup takes no backup — it is a command
group that prints help and exits 0:
bd backup init <path-or-dolthub-url> # once, to configure a destination
bd backup sync # take the snapshot
What the migration looks like
On an embedded or local store, the first command you run after installing
applies the whole set, in place. (A shared dolt sql-server is never
auto-migrated — see Shared servers below.) The main series
runs 0054 → 0066 (13 migrations), and then the clone-local series runs through
the same printer with its own numbering, 0012 → 0026 — so it is about
28 migrations, and the counter visibly restarts partway through:
Applying migration 0065: widen_wisp_comments_text…
Applying migration 0066: add_events_journal_actor…
Applying migration 0012: create_leases… ← clone-local series, not a restart
A counter jumping backwards looks exactly like a loop. It is not one — let it finish. Expect the run to take noticeably longer than the commands after it (two passes rewrite rows rather than reshaping tables). It is crash-resumable and picks up where it left off.
Those lines go to stderr, and only when stderr is a terminal, so a piped or CI upgrade prints nothing at all. Silence there is not a stall either.
Repair blocked flags after migrating
Migration 0059 can mark issues as blocked when they are not, which drops them
out of bd ready without any error
(#7037). It happens on a
Dolt server older than 2.4.0, and the embedded engine is likely affected too.
Once a database has migrated, run this once for that database on every clone:
bd recompute-blocked --json
It recomputes the flag from the dependency graph, so it is safe on any
database, and "rows_corrected" greater than zero means the database was hit.
It works in embedded, server and proxied-server mode, so run it even where
bd doctor cannot check blocked state.
Upgrade every client that shares a store, together
A bd binary refuses a database migrated past the schema it knows, rather than
proceeding blind. One machine upgrading takes the shared store forward and every
client still on 1.2.2 stops working. Check for a second binary earlier in your
PATH with which -a bd, and restart any long-running bd serve — noting that
bd --readonly serve is now refused outright, so a server scripted with that
flag will not come back up until you drop it.
If the store is a shared dolt sql-server rather than a local one, follow
Shared servers below: 1.3.0 will not migrate it without
explicit consent, precisely so the fleet upgrade can come first.
If you need to go back, the rollback is a schema-cursor rollback rather than a downgrade of the data — see Accidental v1.2.1 Release, whose procedure is the same for any cursor rollback even though its worked example is that release.
Once you are on the new binary, bd upgrade review prints exactly the changes
between the version you were running and this one. Several commands changed
defaults, so read it before your first session.
Remote-backed databases and multiple clones
bd refuses to silently apply pending schema migrations to a database that has
a Dolt remote configured. Migrating more than one clone of a shared remote
independently forks the schema, after which bd dolt pull can no longer merge —
the break is silent and, across a primary-key-reshaping migration, unrecoverable
(#4259). The supported flow
is: one machine migrates and publishes; every other clone takes the migrated
database from the remote instead of migrating its own.
This applies to every upgrade that crosses a pending migration on a remote-backed database — the same procedure whether you are moving to a prerelease or to a stable release.
The gate is state-aware by default
(#4516): before blocking,
bd consults the remote's cached schema state and
- auto-migrates when the remote is at the same schema version as this
clone — no one has migrated yet, so this clone is a safe first-mover
(concurrent first-movers converge to identical tables). It reminds you to
bd dolt pushafterwards. This applies to embedded mode only: a shared server always stops for consent, because migrating it changes the schema every connected client sees (see Shared servers below). - stops and directs you to adopt (
bd bootstrap) when the remote has already been migrated by another clone. On a clone that already has a local database,bd bootstrapby itself reportsNothing to do.and changes nothing; adopt with the steps under Multiple clones sharing one remote below. - stops for a human decision when this clone and the remote applied different content for the same migration (a genuine fork), or when the remote's schema state cannot be read from the cached ref.
Set BD_SMART_GATE=0 to opt out and make the gate block unconditionally.
The recipes below are the explicit path and work the same in either mode.
Important ordering: once the new binary is installed, a database with
pending migrations is gated on every open — bd dolt push and bd dolt pull are refused too, not just bd migrate. So do all syncing with your
current binary, before you install the new one.
There is one exception, and the gate names it when it applies: if the stop is
the data-behind one — this clone is level with the remote on schema but is
missing commits it has not pulled — then bd dolt pull is the remedy and is
allowed through, because migrating before that pull is what wedges the clone.
A proxied-server workspace refuses bd dolt pull outright, so there the pull
runs on the server host instead. See
Clone behind the remote. Every other
pending-migration refusal still blocks the pull, so the ordering rule above is
what to plan for.
Back up before you migrate. Schema migrations assume the database matches the shape the previous migrations left behind; real databases sometimes drift (interrupted writes, tooling bugs, very old bootstraps). A JSONL export is cheap, issue-complete, and importable by any bd version:
bd export --all -o .beads/backup/pre-migrate-$(date +%Y%m%d).jsonl
bd export captures issues, not Dolt history or config — for a full snapshot
also copy the .beads directory (or dolt backup in server mode) while no
bd command is running.
Single clone (including a solo user with a remote):
bd dolt push # 1. CURRENT binary: publish all local work
bd export --all -o .beads/backup/pre-migrate.jsonl # 2. backup (see above)
# 3. install the new binary (see Upgrading above)
bd migrate schema # 4. migrate as the designated migrator
bd dolt push # 5. publish the migrated schema
bd version # 6. confirm the new version is active
If bd's remote-migrate gate blocks the run, it prints the available options —
migrating here as the designated migrator, adopting the remote's already-migrated
database, or recovering a fork — and asks for an explicit operator decision.
Follow the guidance it prints.
For scripted or CI upgrades where nobody reads the output, run
bd migrate schema as an explicit step in exactly one job, never in all of
them. If the gate blocks a run it prints both the available options and the
scripted override that fits the situation.
Multiple clones sharing one remote:
# 1. With your CURRENT (old) binary, on EVERY clone: publish all work, get in
# sync and back up, then stop editing until the upgrade is done.
bd dolt push
bd dolt pull
bd export --all -o .beads/backup/pre-migrate.jsonl
# 2. Designated migrator ONLY: install the new binary, then migrate and publish.
bd migrate schema
bd dolt push
# 3. Every OTHER clone, after the migrator has pushed: pull the migrated
# database while still on the CURRENT binary, then install the new binary.
bd dolt pull
bd version # after installing: confirm the new version
The pull in step 3 brings the migrated schema down with the data, so the new binary finds nothing to migrate and the clone keeps its local state. Between that pull and the install, the old binary refuses the database (it is now newer than the schema the old binary knows), so install straight away.
A clone that already runs the new binary cannot take step 3 as written: the
gate refuses bd dolt pull while the clone has pending migrations. Adopt the
migrated database by re-cloning it. bd bootstrap never replaces an existing
database — run against one, it prints Database already exists and
Nothing to do. and leaves the clone on the old schema — so move the local
database aside first, then re-apply the step 1 backup:
mv .beads/embeddeddolt .beads/backup/embeddeddolt.pre-adopt # embedded mode (the default)
bd bootstrap # clones the migrated database from the remote
bd import .beads/backup/pre-migrate.jsonl # restores what a re-clone cannot bring
The re-clone brings only what the remote has, so the import restores this
clone's clone-local beads (wisps, for example) and anything step 1 did not
push; rows the remote already holds in a newer version are skipped as stale.
The backup has to come from the old binary, as in step 1: on a clone with
pending migrations the new binary's bd export fails. Keep the moved-aside
directory until you have checked the result — the old binary can still open
it. In server mode the database lives under .beads/dolt/ instead; stop the
server and move the database outside .beads/dolt/ (see
re-clone-gotchas).
If a clone was instead migrated independently and bd dolt pull later fails
with cannot merge because table dependencies has different primary keys in its common ancestor, the schema has already forked — follow the recovery playbook:
the pk-fork-refused runbook.
Clone behind the remote
This is the one pending-migration stop whose remedy is a bd dolt pull, and
the one the gate links here rather than to the migrate-or-adopt recipe above.
A proxied-server workspace refuses that pull, so it runs on the server host
instead; the last part of this section covers that case.
It fires when the clone is level with the remote on schema but behind it in
data — the remote has commits this clone has not pulled. On schema alone the
clone looks like a safe first-mover, so before
#6575 the gate let it
migrate; the new schema commits then landed on a history missing those
commits, and once a migration moves a tracked table onto Dolt's ignore plane
every later bd dolt pull refuses to merge
(#6368). The clone can no
longer fetch what it was already behind on.
The remedy is the pull, and nothing else:
bd dolt pull # allowed through this stop, unlike other refusals
# then re-run the command that was refused
Nothing local is discarded: with no commits of its own the pull is a pure
fast-forward, and if the clone has diverged the pull merges (resolve any
conflicts, or decide them in bulk with bd dolt pull --strategy ours|theirs
on embedded storage / bd conflicts resolve on a server store). Once there is
nothing left to pull, the clone is the first-mover it looked like and the
migration proceeds on its own.
Do not force past this stop. bd migrate --force applies the migration
while the clone is still behind — precisely the state the stop exists to
prevent — and the bd dolt push that would follow is rejected as a
non-fast-forward anyway.
On a shared server, the pull is still the first step, but the migration after it needs explicit consent, because it promotes the schema for every co-resident client at once (see Shared servers). Confirm those clients are upgraded, then:
bd dolt pull # first, as above
bd migrate schema --force # add --global for the shared global database
--force is the consent form here because this stop always has a remote
configured — the behind-ness is read from the remote-tracking ref — and the
bare bd migrate schema consent applies only to a shared database with no
remote. It is safe at this point and only at this point: the pull has already
landed the commits the clone was missing.
In proxied-server mode the database is shared too, so the same two steps
apply, but they run from two places. The workspace refuses bd dolt pull
(proxy.dolt_pull.unsupported) and bd conflicts, so the pull, and any
conflict resolution it needs, runs where the database lives: on the server
host, from a workspace with direct database access. The consent step can then
be run from the proxied workspace, but only once that pull has landed:
bd dolt pull # on the server host, with direct database access
bd migrate schema --force # then, from the proxied workspace
Nothing in the proxied workspace enforces that order. It refuses the bare
bd migrate verb but not bd migrate schema --force, and
BD_ALLOW_REMOTE_MIGRATE=1 grants the same consent to any command. Both are
honored before this stop is reached, so the stop never sees them: run either
one before the pull and it migrates the database while it is still behind.
Do not reach for either to get past the stop.
Shared servers
A server-mode database is served to every bd client connected to that
dolt sql-server, so a schema migration is not a local event: it promotes the
schema version for all of them at once, and clients still running an older
bd refuse the database until they are upgraded too. bd therefore never
auto-migrates a shared database on a version bump — with or without a remote
configured, though the two cases consent differently
(#5920).
Upgrade one server's clients like this:
# 1. Upgrade bd on every client of the server. Reads keep working throughout —
# an upgraded client reads the old schema, it just cannot write to it
# (unless the server's schema is v53 or older; see below).
bd version # on each client, confirm the new version
# 2. Once, from a workspace already set up against this server: consent.
bd migrate schema # add --global for the shared global database
# 3. Confirm.
bd doctor
Between steps 1 and 2, an upgraded client reads normally and its writes are refused with the gate's guidance. Nothing is silently promoted, so there is no deadline — but the window is a degraded one, so keep it short.
If the server's schema is v53 or older (1.1.x, or 1.2.2, the re-release of
the 1.1 line), reads can fail too until step 2: bd list stops with
table not found: leases
(#6929). Run step 2 as
soon as the clients are upgraded.
If the shared server also has a Dolt remote, step 2 is not enough. Two
hazards now apply at once — the co-resident lockout above and the cross-clone
fork of Remote-backed databases
— so bd requires the stronger designated-migrator consent it describes:
bd migrate --force, from exactly one machine, followed by bd dolt push. If
another clone has already migrated and pushed, adopt its database instead of
migrating, as described under
Remote-backed databases —
bd bootstrap alone does not replace an existing database. On a shared
server, adopting also promotes the schema for every client of that server, so
step 1 still comes first either way.
A new client joining a server whose schema is behind is refused before its
workspace is written, so there is nothing to run bd migrate schema from
there: do step 2 from a client that is already set up, or join and migrate in
one step with BD_ALLOW_REMOTE_MIGRATE=1 bd init ….
The same rules apply in proxied-server mode, which is a shared server reached through a local proxy. Three differences worth knowing:
- read commands print a warning and keep serving the current schema, rather than the read simply not touching it;
bd serverefuses to start against a database with pending migrations, because a daemon has no operator to consent for it. Reconcile the schema first with step 2, then start the daemon — or, for an unattended service, putBD_ALLOW_REMOTE_MIGRATE=1in its environment as an explicit, auditable standing consent;- the data-behind stop's remedy,
bd dolt pull, cannot be run from the proxied workspace: run it on the server host first, then consent from the proxied workspace (see Clone behind the remote).
Cross-era Upgrades
If you're upgrading from a much older version of bd, inspect the storage layout
and metadata before running the current binary. A .beads/dolt/ directory alone
does not identify a legacy workspace: supported current server mode uses that
directory too. Current bd evaluates explicit server metadata, the presence of
that local root, and the bounded .local_version witness together. An explicit
server selection is not overridden by a stale .beads/embeddeddolt/ repository.
| Storage layout | Upgrade path |
|---|---|
Current embedded metadata with .beads/embeddeddolt/ and no explicit server selection |
Direct current-era upgrade |
Explicit server metadata plus .local_version from v0.55.4 through v0.62.0, whether or not .beads/dolt/ exists |
Explicit legacy Dolt export/import |
Explicit server metadata plus .beads/dolt/ and a witness whose major version is 1 or newer |
Normal current server-mode upgrade |
Explicit server metadata plus .beads/dolt/ and a missing or pre-v1 witness |
Explicit legacy Dolt export/import |
Explicit server metadata plus .beads/dolt/ and a witness that is present but unreadable |
Normal current server-mode upgrade, with a warning |
Explicit server metadata without .beads/dolt/, and a missing, malformed, or non-historical witness |
Normal current server-mode compatibility path |
.beads/dolt/ with missing metadata or persisted dolt_mode blank/embedded |
Explicit legacy Dolt export/import, except for the configured shared-server compatibility path described below |
One .beads/*.db file, such as beads.db or vc.db |
Sealed SQLite bridge |
The witness is whatever bd held in its own version string when it last touched
the workspace, so it may be a plain release, a release candidate, a build
carrying metadata, or a Go pseudo-version; all of those are read as the version
they name. A witness that is present but unreadable is not treated as a legacy
marker — no pre-v1 bd could have written one — so bd warns and continues
rather than refusing every command. A missing witness stays ambiguous and is
still refused.
Current bd refuses recognized historical SQLite and legacy Dolt layouts before
opening storage or rewriting metadata. This is intentional: preserve the source
and complete the matching explicit migration below.
PostgreSQL and MySQL are removed backends, not supported cross-era upgrade
paths. Current bd refuses metadata that selects either backend, and the sealed
bridge below accepts SQLite sources only.
.beads/embeddeddolt/: direct upgrade
Upgrade the binary, apply the pending schema migrations, and update the database metadata:
bd migrate schema
bd migrate
If the project was initialized before bd init automatically wired git origin
as the Dolt remote, verify the remote after upgrading:
bd dolt remote list
When the list is empty, fix it on the machine whose local database is authoritative:
bd export -o .beads/issues.pre-remote.jsonl # optional issue audit export
bd dolt remote add origin git+ssh://git@github.com/org/repo.git
bd dolt push
Commit the resulting .beads/config.yaml change so other clones can run
bd bootstrap or bd dolt pull.
Historical Dolt server mode: explicit migration
Do not run current bd init --force when .beads/dolt/ has missing metadata
or persisted dolt_mode is blank/embedded. Those old embedded layouts are
never current embedded storage. The same explicit path applies when metadata
selects backend: dolt, dolt_mode: server and .local_version records
v0.55.4 through v0.62.0.
First take a native snapshot while every writer is stopped. Restore that snapshot to a disposable workspace, export it with the verified historical binary, then import the export into a fresh current project. Keep the original and snapshot unchanged until the cutover has been reviewed. The SQLite sealed-copy helper below does not start or manage a Dolt SQL server.
Explicit server metadata with a v0.55.4–v0.62.0 witness is always refused,
including when there is no local .beads/dolt/ root. When that root does exist,
the guard admits explicit server mode only with a syntactically valid witness
whose major version is 1 or newer; a missing, malformed, or pre-v1 witness fails
closed. Without the local root, a missing, malformed, or non-historical witness
is admitted only as a compatibility layout.
The configured shared-server compatibility path applies only when persisted
metadata is missing or leaves dolt_mode blank/embedded; it does not override
an explicit server selection with a local root. Compatibility admission cannot
prove that a workspace is modern. If you know it was created by v0.55.4 through
v0.62.0, use this explicit bridge even when its witness was lost or damaged.
Otherwise, follow the normal bd migrate --dry-run and bd migrate schema
flow for an admitted server workspace.
One .beads/*.db file: sealed SQLite bridge
The old binary stored data in SQLite. The new binary uses Dolt.
Recommended: use the sealed-copy bridge (requires jq):
Stop every process that can write the old workspace before starting.
Run this from a source checkout at the exact commit you intend to run; installed
binaries do not include repository scripts. Record that commit with
git rev-parse HEAD before executing the script. Download the old bd asset
only from the official gastownhall/beads release and verify the asset with its
published SHA-256:
sha256sum -c checksums.txt --ignore-missing
On macOS or BSD, use shasum -a 256 on the downloaded archive and compare
the result with that archive's entry in checksums.txt.
scripts/migrate-legacy-to-current.sh \
--source /absolute/path/to/old-project \
--destination /absolute/path/to/old-project-cutover \
--source-version v0.50.3 \
--old-bd /absolute/path/to/verified-old-bd \
--new-bd /absolute/path/to/current-bd \
--prefix beads
For a source older than v0.49.6, also supply an authenticated v0.49.6 binary:
scripts/migrate-legacy-to-current.sh \
--source /absolute/path/to/old-project \
--destination /absolute/path/to/old-project-cutover \
--source-version v0.17.0 \
--old-bd /absolute/path/to/verified-old-bd \
--canonicalizer-bd /absolute/path/to/verified-v0.49.6-bd \
--new-bd /absolute/path/to/current-bd \
--prefix beads
Verify the historical binary against its official release checksum before running the bridge. The script verifies each binary's reported version, rejects Dolt and ambiguous layouts, retains a sealed source copy, and compares the candidate export with the canonical historical export. Activate the cutover manually only after reviewing those retained artifacts.
Troubleshooting Upgrades
Hooks out of date
bd hooks install
Database schema changed
bd migrate --dry-run
bd migrate schema
Recovery after upgrade
If you need to restore from a backup:
bd init
bd backup restore [path] --force
Or pull from a Dolt remote:
bd dolt pull