beads/docs/integrations/claude-code.md
Julian Knutsen 1de9b59324
fix(setup): bd setup claude --global manages the section in ~/.claude/CLAUDE.md, not the current directory (#7696)
* fix(setup): keep bd setup claude --global's section in ~/.claude/CLAUDE.md

bd setup claude --global put its hook in ~/.claude/settings.json but wrote
the managed beads section into the current directory's CLAUDE.md, and
--remove --global stripped it from there. Run from $HOME it created
~/CLAUDE.md with project scaffolding, which stops Claude Code reading
AGENTS.md in projects below it; run inside a project it removed the
section that project's own install had written, leaving its hooks.

A global install and removal now manage the section in Claude Code's
user-level ~/.claude/CLAUDE.md (created holding only the section, no
project scaffolding), with hints naming bd setup claude --global. With
global or plugin hooks, --check reports that file when the project's
instructions have no beads section; a project install is still judged
on the project's file alone. Project installs are unchanged.

Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* fix(setup): render the user-level CLAUDE.md section independently of the project

~/.claude/CLAUDE.md is shared by every project, but bd setup claude --global
rendered and --check judged its section with the current directory's beads
config (sync.remote, sync.git-remote, no-push). From a project with a remote
and one without, --check called the other's install stale and its hint
flipped the file back. The user-level file now always renders with the
default options, so install and --check agree across projects.

Also pin --check's fallback to the project's file and project hint when
neither file has a section, tell existing --global users to re-run it, and
name ~/.claude/CLAUDE.md in the ide-setup recipe table.

Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* fix(setup): judge the user-level Claude files from $HOME and ~/.claude

Run from the home directory, the project's .claude/settings.json is the
global one, so bd setup claude --check reported a global install as project
hooks and judged ~/CLAUDE.md; its "Run: bd setup claude" hint then created
the ~/CLAUDE.md a global install exists to avoid. Run from ~/.claude, the
project's CLAUDE.md is the user-level file, and --check judged it with that
directory's render options and the project hint.

--check now reports hooks as global from $HOME and judges the user-level
file there and from ~/.claude with the fixed options and the --global hint.
With user-level hooks and no section in either file it names --global
unless the project has its own CLAUDE.md. A --remove run from $HOME, which
removes the global hooks, also removes the user-level section.

The init agent-artifact test ran bd setup claude with HOME at the project,
so its checks would now see a home directory; it gets a separate HOME and
its goldens are unchanged.

Rebase note (maintainer): rebased onto main after #7678 merged; main's
agent-artifact harness already runs bd with a separate HOME, so this
commit's harness edits to cmd/bd/agent_artifacts_embedded_test.go were
dropped.

Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* test(setup): pin --check's user-level choice beside project instructions

With global hooks, --check judges ~/.claude/CLAUDE.md when the project's
own CLAUDE.md has no beads section but the user-level file has one, and
when run from the home directory whose ~/CLAUDE.md has no section. Nothing
exercised either half of that condition: replacing it with false left the
suite and goldens green. Add a subtest for each; each now fails when its
half of the condition is dropped.

Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* fix(setup): name --global when --check finds no hooks from $HOME

From the home directory --check with no hooks said 'Run: bd setup claude'.
Following it runs a project install there, which creates ~/CLAUDE.md with
project scaffolding, the file that stops Claude Code reading AGENTS.md in
the projects below it. The missing-section hint at home already names
--global; make the missing-hooks hint match, with a subtest.

Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* docs(setup): qualify the --global CHANGELOG entry; watch ~/.claude/CLAUDE.md

The CHANGELOG said --check from the home directory judges the user-level
files, but a beads section still in ~/CLAUDE.md is judged instead, and
the --global hint for a missing section applies only when the project has
no CLAUDE.md of its own. Say both, mention the new missing-hooks hint at
home, and re-wrap the paragraph.

The embedded agent-artifact harness comment said a global install writes
$HOME/CLAUDE.md; it now writes $HOME/.claude/CLAUDE.md. Track that path
too and reword the comment. The bd init goldens do not change.

Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* fix(setup): word the user-level CLAUDE.md section for repositories that use beads

bd setup claude --global writes its section to ~/.claude/CLAUDE.md, which
Claude Code loads in every project, but rendered it with the project
wording: "This project uses bd (beads)" and "Use bd for ALL task tracking —
do NOT use TodoWrite". In a repository without beads that told the agent to
give up its own task tools and pointed it at bd, whose answer there is
"run 'bd init'", while the global hook, bd prime, stays silent outside a
workspace.

RenderOpts.UserLevel rewords the opening line and the task-tracking rules of
both profiles so they apply only in beads repositories. The global env fixes
it through agents.UserLevelRenderOpts, so install, in-place update and
--check agree on the hash from every directory, and a project-worded section
left in ~/.claude/CLAUDE.md reads as stale and is reworded by --global. The
new minimal-user and full-user variants are pinned by golden and hash; the
project rendering is unchanged.

Also pin sameDir's symlink following: --check from a symlink to $HOME or to
~/.claude still judges the user-level files.

Refreshed onto main past #7692, whose --remove takes the blank lines
around the section with it and whose setup appends a section after one
blank line: claude-setup-global-beside-project-install.golden no longer
records the old hole (an extra blank line before the appended section,
two left behind by --remove --global).

Agent-Signature: claude-code-claude-opus-5-5-unknown-reasoning on behalf of Julian Knutsen
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Eddie the Engineer <338826946+gascity-eddie[bot]@users.noreply.github.com>
2026-10-19 12:22:04 +00:00

209 lines
5.2 KiB
Markdown

---
title: Claude Code
description: Wire beads into Claude Code with a SessionStart hook that primes context, using the CLI instead of MCP
---
How to use beads with Claude Code.
## Setup
### Quick Setup
```bash
bd setup claude
```
This installs:
- **SessionStart hook** - Runs `bd prime --hook-json` when a session starts. SessionStart also fires after context compaction, so the same hook refreshes context automatically.
- **CLAUDE.md pointer** - A minimal beads section in your project's `CLAUDE.md`, or with `--global` in your user-level `~/.claude/CLAUDE.md`, where it applies only in repositories that use beads (skipped if that file is a symlink).
By default the hook is written to the project's `.claude/settings.json`. Variants:
```bash
bd setup claude --global # Install to ~/.claude/settings.json and ~/.claude/CLAUDE.md instead
bd setup claude --stealth # Stealth mode: flush only, no git operations
bd setup claude --remove # Remove the hook and the CLAUDE.md section
```
If the [beads plugin](/integrations/claude-code-plugin) is enabled, `bd setup claude` skips writing hooks - the plugin provides its own, and duplicates would run `bd prime` twice per session.
### Manual Setup
Add to `.claude/settings.json` (project) or `~/.claude/settings.json` (global):
```json
{
"hooks": {
"SessionStart": [
{
"matcher": "",
"hooks": [
{ "type": "command", "command": "bd prime --hook-json" }
]
}
]
}
}
```
The `--hook-json` flag wraps the output in the hook JSON envelope Claude Code expects. No `PreCompact` hook is needed - SessionStart fires again after compaction.
### Verify Setup
```bash
bd setup claude --check
```
## How It Works
1. **Session starts** → `bd prime` injects ~1-2k tokens of context
2. **You work** → Use `bd` CLI commands directly
3. **Session compacts** → SessionStart fires again and `bd prime` refreshes workflow context
4. **Session ends** → `bd dolt push` syncs changes
### Why CLI + hooks instead of MCP?
Context efficiency. MCP tool schemas can add 10-50k tokens to every request; `bd prime` adds ~1-2k tokens of workflow context - 10-50x less overhead, which means lower cost, lower latency, and better model attention. Prefer CLI + hooks in any environment with shell access; use the [MCP server](/integrations/mcp-server) only where the CLI is unavailable, such as Claude Desktop.
### Why not Claude Skills?
Beads doesn't ship or require Claude Skills (`.claude/skills/`). `bd prime` already delivers the workflow context, and the workflow fits a simple command set (ready → create → update → close → sync). Skills are also Claude-specific, which would break beads' editor-agnostic approach - the same CLI works in Cursor, Windsurf, and every other shell-capable editor. You can create your own Skills on top of beads, but none are needed.
## Essential Commands for Agents
### Creating Issues
```bash
# Always include description for context
bd create "Fix authentication bug" \
--description="Login fails with special characters in password" \
-t bug -p 1 --json
# Link discovered issues
bd create "Found SQL injection" \
--description="User input not sanitized in query builder" \
--deps discovered-from:bd-42 --json
```
### Working on Issues
```bash
# Find ready work
bd ready --json
# Start work
bd update bd-42 --claim --json
# Complete work
bd close bd-42 --reason "Fixed in commit abc123" --json
```
### Querying
```bash
# List open issues
bd list --status open --json
# Show issue details
bd show bd-42 --json
# Check blocked issues
bd blocked --json
```
### Syncing
```bash
# ALWAYS run at session end
bd dolt push
```
## Best Practices
### Always Use `--json`
```bash
bd list --json # Parse programmatically
bd create "Task" --json # Get issue ID from output
bd show bd-42 --json # Structured data
```
### Always Include Descriptions
```bash
# Good
bd create "Fix auth bug" \
--description="Login fails when password contains quotes" \
-t bug -p 1 --json
# Bad - no context for future work
bd create "Fix auth bug" -t bug -p 1 --json
```
### Link Related Work
```bash
# When you discover issues during work
bd create "Found related bug" \
--deps discovered-from:bd-current --json
```
### Push Before Session End
```bash
# ALWAYS run before ending
bd dolt push
```
## Plugin (Optional)
For slash commands and enhanced UX, install the [beads plugin](/integrations/claude-code-plugin):
```bash
# In Claude Code
/plugin marketplace add gastownhall/beads
/plugin install beads
# Restart Claude Code
```
Adds slash commands:
- `/beads:ready` - Show ready work
- `/beads:create` - Create issue
- `/beads:show` - Show issue
- `/beads:update` - Update issue
- `/beads:close` - Close issue
## Troubleshooting
### Context not injected
```bash
# Check hook setup
bd setup claude --check
# Manually prime
bd prime
```
### Changes not syncing
```bash
# Force push
bd dolt push
# Check system health
bd doctor
```
### Database not found
```bash
# Initialize beads
bd init --quiet
```
## See Also
- [Beads Claude Code Plugin](/integrations/claude-code-plugin) - Packaged plugin with slash commands
- [MCP Server](/integrations/mcp-server) - For MCP-only environments
- [IDE Setup](/getting-started/ide-setup) - Other editors